Problems with adobe elements 9

I recently got a product called adobe premiere elements 9.
I filmed a video on my new camera, and the file format is MOV., i edit it, but when i convert. I get some troubles, the video i get flickers like i put on the ghosting effect. If somebody knows why it does that, and how i can provent it. Please respond:)
Jasper

Jasper,
Welcome to the forum.
As Steve points out, MOV is but a "wrapper," and it is what's inside, that matters. The same holds true for AVI's, WMV's, and more. This ARTICLE goes into more detail.
When one begins a Project, at New Project, they need to know the details of their Source Files, and the Project's Preset, chosen at New Project, must match that Source Footage. That is why it is so important to know about that footage - so one can match to it. If you will tell us all about that footage, someone can help you make sure that your Project Preset matches, so that you do not have issues.
With playability issues, the first issue is the match between your Project Preset, and your Source Footage. Next comes one's system, so it might be a good idea to start gathering up the info there. This ARTICLE will give you some ideas on what infot would be so useful.
Good luck,
Hunt

Similar Messages

Compatability problems with adobe elements

After installing adobe elements 4 I have had problems importing itunes and iphotos to my imovie08 projects

Jasper,
Welcome to the forum.
As Steve points out, MOV is but a "wrapper," and it is what's inside, that matters. The same holds true for AVI's, WMV's, and more. This ARTICLE goes into more detail.
When one begins a Project, at New Project, they need to know the details of their Source Files, and the Project's Preset, chosen at New Project, must match that Source Footage. That is why it is so important to know about that footage - so one can match to it. If you will tell us all about that footage, someone can help you make sure that your Project Preset matches, so that you do not have issues.
With playability issues, the first issue is the match between your Project Preset, and your Source Footage. Next comes one's system, so it might be a good idea to start gathering up the info there. This ARTICLE will give you some ideas on what infot would be so useful.
Good luck,
Hunt

Load problem with Adobe Elements 11

Trying to load Adobe Elements 11 using Windows 7 and Explorer 10. It does not load but asks to try Exporer 10, dead end.

use a different browser or use ie10's compatibility mode.

Why do I have a problem with Adobe Elements 12 Layout section?

I have Adobe Elements 12, and I'm having trouble in the Layout section at the bottom of the screen.
Within the Layout section I can use all the layouts except the All floating.
When I first used Elements 12 this was working but all of a sudden it stop working.
What can I do to solve this.

duplicate, see:
Why in my Layout section the All floating section not work in Abobe Elements 12?

Installation problem with adobe elements on Mac

Nothing shows up when I insert disc 3 of adobe photoshop elements into my Mac. When I go to DVD player and push play it says "supported disc not available". I don't know what else to do. I have tried turning my Mac on and off and have switched the sides of the disc.

Do you see the disc on your desktop? Are you able to see other discs mounted on your desktop? If you go to the Finder menu do youhave a check mark next to CDs, DVDs, and iPods to be shown on the desktop?

How do i get help with problems with adobe elements

im using windows 7 and i try to sign in and it excepts my password but program does not start nothing happens the sign in box disappears and if i try again it asks me to sign in what am i doing wrong ?

OMG!
What version of Premiere Elements is involved with your Windows 7 64 bit computer?
ATR.

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with Adobe Premiere Elements 12 using Scary Halloween template

I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanks

jeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR

Problems with Adobe Premiere Elements 4.0. HELP?

Hello!
I've been trying to edit a short film for weeks now but I have quite a few problems with Premiere Elements 4.0. To start with I have a Windows 7 Toshiba Satellite L750-16L with Intel Pentium.
The first and main problem is that I can't import AVCHD (.mts) and Quick Time (.MOV) footage. I have a K-Lite Codec Pack to let me import and export certain types of footage but it seems to not like the footage I want to import.
Another problem I have is that I can't export the project without the program crashing, and sometimes it just crashes or freezes randomly.
I've tried emptying The Cache and using diffrent project settings but with no success.
If anyone has any suggestions they would be greatly appreciated as I'm stumped about where to go from here.
Thanks,
Jack.

Truemanz
True. AVCHD was not supported until Premiere Elements 7. Those with Premiere Elements 4 on Windows typically converted the AVCHD to another format so that they could use Premiere Elements 4 as the video editor, providing they had enough computer resources for the task. Yet, there were some who could use AVCHD with Premiere Elements 4.0, but they were the ones working from a Sony Vaio that offered a special plug-in for the AVCHD support and the same computer resources considerations.
Putting aside the AVCHD.mts.
What has not been mentioned yet is your report of not being able to work with what you describe a QuickTime (mov) footage. What are the properties of this footage...video and audio compressions, frame size, frame rate, progressive or interlaced, etc? Do you have the latest version of QuickTime installed on your computer with Premiere Elements 4? And, is your Premiere Elements 4 set Run As Administrator and/or from a User Account with Administrative Privileges?
Versions of Premiere Elements earlier than 10 are 32 bit applications which run into limitations of the 32 bit operating system. Computer resources and the demands on it from a large sized project may enter into the mix. But, let us clear up the QuickTime (mov) footage situation.
Thanks.
ATR

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

Problems with ps elements 10 on imac

hi,
i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
I have the following questions/problems:
+ starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
+ the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
+ I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
+ panorama foto work is mostly running out of memory?! 12gb on board
Please can anybody help me?
Thanks
mikle

No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
Von meinem iPad gesendet
Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
Re: problems with ps elements 10 on imac
created by Barbara B. in Photoshop Elements - View the full discussion
If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with Premiere Elements

1. My biggest problem with Adobe Premiere Elements 10 is it closes out on me all the time. I have a windows 7 computer. When I open it up it will stay up for about a min. then it pops up Adobe premiere elements has stopped working and shuts down on me.
2. The videos are jerky. When I go to play them they won't play smoothly. They are AVI files.
have the inspiration browser updated, I have installed quick time player, the computer is all updated, the videos are rendered. I don't know what is going on with it. It should be working.

It sounds as though these AVI files are not from a digital video camcorder.
What model of camcorder are these videos from and what resolution are they?
If they are from a still camera or smart phone that shoots in MP4/AVIs, they're not going to work in that format in Premiere Elements.
If you see a lot of red lines above your clips when you add them to your timeline, that's a pretty good indication of problems.
Is that the case in your project?
BTW, please don't start a new thread if you're continuing to discuss the same performance problems. It makes it very difficult to follow a discussion because we're not sure what you've already discussed and tried and what the history of your problem is.

Having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner.

having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.

sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR

Problems with adobe elements 9

Similar Messages

Maybe you are looking for