Problems with adobe in Vista

I keep getting an error message "site advisor has crashed" each time I try to download adobe acrobat to my Windows Vista Premium systerm. Can't read any PDF files, though i could until a couple of weeks ago.

Hi 72archer
The Error occurs due to Browser ...
Please Change your browser and try again...

Similar Messages

Windows vista - IE 7 - problem with adobe flash player

last week I bought a notebook with MS vista home premium,
after some hours of
enthusiasm I had problems with adobe flash player.
Accessing to some sites I receiveed the requested to install
flash player, I did it and even if the installation seemed
ended fine I always got the pop up with the request to
install Flash player, as if it were not previously installed.
I did a boot after every installation.
I read your forum on:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1262552&enterthread=y
and I tried to follow some suggestions reported on it , like
uninstall the flash player using the
downloaded uninstall program from adobe site then I tried to
reinstall flash player “as administrator”
but always the installation appeared to end fine, the
programs was present into macromed flash directory
but I continue to receive the pop up to install flash player,
moreover some
images commonly shown when I visit the same sites from
another PC with XP are not shown on the new
pc with Vista, I think that also this problem could be
connected to flash player not well installed
One of these sites is www.rossoalice.it or youtube.
At this point, I think that the problem can be on the
registry but I don’t know what I can check.
I sow on the above adobe forum that mr. Darren J. McNally was
involved in this kind of problem,
every your suggestions will be very appreciated.

I got my computer about 6 months ago and i use
foxfire but i need explorer to work for my games but the adobe
flash player dont work i think if this cant be fixed vista i
probaly the gayest thing u can have on ur computer and adobe should
stop making flash players that dont work and just go do something
like sell stuffed animals at a carnival unless thats just to hard
for them and they wont do that right either. Grrrrrrrrrrr read this
and laugh or follow instructions or get back to. this be an angry
letter for sho. scuba steve out. and ahhhhhhh if u find solution
tell me asap or i will eat a cat for everyday u dont tell me im
gooing crazy about this omg
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaa

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

"there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)

We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!

Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

Problems with Adobe Speedgrade CS6 in Windows 7

I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
Windows 7 Ultimate SP1
Gateway FX 6800-01e
2.67 GHz i7 Quad-core processor
16.0 GB RAM
750GB primary hard drive (Seagate ST3750528AS)
2 - 2TB secondary hotswap drives
NVidia Quadro 4000 w 2GB dedicated RAM
2 Acer 231SHL HD monitors running in extended dual screen mode
Adobe Speedgrade 6.0.4x25
It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference. I have also tried uninstalling it and reinstalling it. I have also applied the latest update through the program interface. The other components of the suite I have installed are:
Premiere Pro CS6
After Effect CS6
Acrobat XI
Audition
Bridge
Photoshop (32-bit and 64-bit versions)
Lightroom 4.3
Prelude
The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped. Thanks in advance!
-Carl Hayes
"What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

Hi,
Have you get rid of the problem ?
I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
It's on windows 7 pro.
Thanks in advance

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Could not complete the Render Video command because of a problem with Adobe Media Encoder.

So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

Have you tried re-installing Photoshop?
Benjamin

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

Problem with adobe premiere CS5 file not responding

I have a problem with Adobe Premiere software, some time ago I was given a file in Adobe Premiere project contains a hard drive to my revision. but when i try to do the project on my computer I was often faced with the problem of not responding. What should I do with this constraint. Thank you.

I would suggest your first action to be logging this question on the user forum for Adobe Premier, not this one for Adobe Captivate.
Try here...

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with Adobe Premiere Elements 12 using Scary Halloween template

I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanks

jeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR

Problem with adobe reader, commenting

one of our authors is using adobe reader x 11,1, and I send him a pdf (enabled commenting and measuring), but for some reason the commenting-fields does not show on his screen?
should I save the pdf in another way?

What do you mean by "commenting fields" exactly? By “commenting filds” I mean the tools in top of the page – delete, highlight etc. When I send the pdf, I save it as “file - save as - reader extended pdf – enable commenting and measuring”, otherwise the commenting tools normally don’t appear by the author.
Are they existing comments? no, it is the text in his pdf-book he needs to correct
Is he able to access the commenting tools? no
You can try sending a non-enabled version since Reader 11 can add comments to a non-enabled document. will try that J
Fra: George Johnson [email protected]
Sendt: 6. november 2012 16:16
Til: Forlagene Idag & Nordan
Emne: problem with adobe reader, commenting
Re: problem with adobe reader, commenting
created by George Johnson <http://forums.adobe.com/people/George_Johnson> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4826849#4826849

Problems with adobe in Vista

Similar Messages

Maybe you are looking for