Problems with Adobe Premiere Elements 10 silent installation with SCCM 2007

Hi, i have some issues when i try to install Premiere Elements 10 from Config Manager.
I have followed these instructions:
http://www.appdeploy.com/packages/detail.asp?id=2331
If i try this commandoline:
setup.exe" /L1033 /S /V“SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx COUNTRY=xxx /qn" it works when i run this locally, but not from Config manager, i get an exit code 1203.
Can someone tell me what i can change in the MSI, so i can use the MSI installer?

Well, if i use this commandoline: oem.exe /UL1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx"
i get this error:
program for advertisement "XXXXXX" failed ("xxxxxx" - "Per-system unattended"). A failure exit code of 255 was returned.
User context: NT-MYNDIGHET\SYSTEM
Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the program, it uses the program's exit code to determine status. An exit code of 255 is considered a failure.
Solution: For more information on the exit code, refer to the documentation for the program you are distributing.

Similar Messages

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

Riccardo Pesare
I have Premiere Elements 10 on Windows 8.1 64 bit, and it runs well there.
But, I must disagree with SG when he writes
It will likely run. But it will not be able to take advantage of Windows 8's advanced architecture (including the 64-bit operating system and ability to access more than 4 gigs of RAM).
You can prove to yourself that Premiere Elements 10 is a 64 bit application running on Windows 8 64 bit. To do this use the Process Explorer Sysinternals and add a Image Type Column readout. When you do this for Premiere Elements 10, 11, or 12 on Windows 7, 8, or 8.1 64 bit, the readout tells you that you are working with a 64 bit version.
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
And, as a 64 bit application, Premiere Elements 10, 11, or 12 Windows should be able to take full advantage of the 64 bit system when Windows 7, 8, or 8.1 64 bit.
I suspect SG is thinking Mac not Windows in his comment. It is my recollection that Premiere Elements 10 Mac is still a 32 bit application on 64 bit system. And, you are using Windows, not Mac.
We will watch for his clarification on this point or for support for what he posted as is.
ATR

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with Adobe Premiere Elements 12 using Scary Halloween template

I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanks

jeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR

Problem reading GoPro Hero Black 4 files (1080p 120 fps) on my iMac with Adobe Premiere Elements

Hello,
I have a problem reading GoPro Hero Black 4 files (1080p 120 fps) on my iMac with Adobe Premiere Elements : the file is read but the quality is quite bad. When I watch it with other software like VLC or MPC, the quality is perfect but the video is sometimes slowed or there are some jumps in the reading.
What is the issue with this ?
thakns for your help !
Olivier.

This is easy. I do it all the time. FCPX ingests GoPro footage just fine. Optimize, and you're good to go.
BTW: A common hiccup occurs when dealing with over-cranked footage. (60fps or 120fps.) Be sure to "conform speed" to actuate the slo-mo. 'Tis also important to designate your project / timeline at 24fps or 30fps to realize the speed difference.
I've gotten burned in the past. I'll drag my over-cranked GoPro footage to the timeline. As it is the "first" clip layed into the timeline, the project assumes THAT speed as a default. (As per my preferences.) Thus, when I "conform speed," nothing seems to happen. That's because my project is displaying at the higher rate. A 60fps timeline showing footage shot at 60fps looks "normal speed."
FYI. (And disregard if you know all this.)

Can a video created with Adobe Premiere Elements 13 be converted to run on Adobe Premiere Elements 11?

Can a video created with Adobe Premiere Elements 13 be converted to run (and be edited, etc.) on Adobe Premiere Elements 11?
I have several hours invested in a video creation that I made with Premiere Elements 13, but now 13 is refusing to work properly (space bar and play button do not move the time line indicator forward). Hopefully, I will get the problem solved, but in the meantime I must get this project completed and don't have time to start over. So, I need to convert the work so that it can be completed with Premiere 11 which seems to work fine.
Thanks, Dave

Dave
Is this an outdated thread? I thought that you had resolved the play button/space bar issue.
Classically, you cannot open a project created in a later version in an earlier version. If you try, you get hit with "The project appears to be damaged, it cannot be opened." messaged. There was one rare and little known occasion when that was not the case. It involved Premiere Elements 10. So, that is not going to help us any here.
If you still have the play button/space bar issue, can you get out of the 13 project by exporting it to file which you can import into a new Premiere Elements 11 project? If need be, I can suggest the details of that if you tell me the project setting for the 13 project.
Please let us know the situation at this time.
Thank you.
ATR

Yosemite upgrade causing issues with Adobe Premiere Elements 10

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Any pre keyed effect sites that work with adobe premiere elements 11?

I have been trying to find a legit non scam/virus site with pre keyed effects like explosions, gunshot fire, fire, and other effects like that.
Most sites that I've tried are virus' or only work with imovie.
Anyone know of any good sites that have pre keyed effects that works with adobe premiere elements 11? (they don't have to look good, I am just practicing with those)

In my book "Cool Tricks & Hot Tips for Premiere Elements 11", I recommend and show you how to use clips from the wonderful site http://detonationfilms.com/ to create explosive effects.

How did you made videos fullscreen on YouTube with adobe premiere elements 10?

Hello,
is there a way to made videos fullscreen on YouTube with adobe premiere elements 10?
Sorry for my poor english and thank you

The black bars are most commonly caused by having Source Footage, that does not match the Project's Frame Size.
This could be a pixel x pixel issue, with say 1280 x 720 Footage in a 1920 x 1080 Project, or it could be a difference in the Pixel Aspect Ratio. That is most common in SD material, between Standard 4:3 and Widescreen 16:9, but can happen with 1440 x 1080 Anamorphic, which does not use Square Pixels, or PAR = 1.0. With most other HD material and Projects, the PAR will more likely be 1.0, or Square Pixels. It could also stem from the Export/Share settings, having a different Aspect Ratio, i.e. pixels x pixels.
This ARTICLE addresses black bars in the Program Monitor.
Good luck,
Hunt

How to remove a timestamp with adobe premiere elements 8

How do I remove a time and date stamp on a video with adobe premiere elements 8.

If the camera burns in the date/time stamp, then there is not much that can be done.
If you need to eliminate that, then the best would be to apply the Effect>Motion>Scale, to enlarge the footage, until the date/time stamp is effectively cropped off by the Frame Size. You might want to look into Effect>Motion>Position, to "move" the date/time stamp closer to an edge.
The other method is tedious, and requires ideally Adobe AfterEffects. There, you could use the Clone Tool, to "paint out" the date/time stamp, if there is enough clean background to do so.
A variation on that method would be to Export/Share as a Filmstrip and Import that into Photoshop (if one had Photoshop Extended, there are other formats, that would work too), and then Frame by Frame, use the Clone Tool to remove that image.
Though not a way to remove it, you can also replace it with a Title, that occupies the area of the date/time stamp, and just cover it up.
If the camera allows you to turn that "feature" OFF, you would want to do so for newer footage.
Good luck, and sorry for the bad news.
Hunt

PrE 12. How to deal with black screen "Created with Adobe Premiere Elements trial version"?

I'm really considering purchasing PrE 12 and would like to try it out. (I have another video editing software and would like to try this one.)
When I add video, I get a black screen "Created with Adobe Premiere Elements trial version". When I hit play, I can hear audio, but I don't get any video (just the black screen). Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen?
Thanks,

To help with troubleshooting, some questions so people have more to work with
More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
And, exactly what are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Tracking shot on photo with Adobe Premiere Elements 7 ?

Hi everybody !
I won't be long : is it possible to make tracking shots on fixed images with Adobe Premiere Elements 7 ?
Examples of what I mean : http://tv.adobe.com/fr/watch/didacticiels-sur-premiere-elements-10/transformez-vos-photos- en-squences-amusantes/ with Adobe Premiere Elements 10 or http://www.youtube.com/watch?v=XzeFQjG4hDo with Pinnacle Studio 14.
Thanks a lot !
Olivier

As Steve G. says, yes, and for most earlier versions of PrE. I recommend his great Basic Keyframing Series on Muvipix.com: http://muvipix.com/products.php?searchphrase=basic+keyframing&btn.x=19&btn.y=9
Keyframing can be applied to most Effects, whether Fixed, or applied, so it can do much more, than Pan & Zoom. The application of it is almost limitless.
Good luck,
Hunt

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Help with Adobe Premiere Elements 8.0

Hello!
I recently began fooling around with Premiere elements and I had a couple of questions about it: First, if you could please watch this video: http://www.youtube.com/user/iTerabithia#p/search/6/01qfQSyq1WI In the almost beginning it shows Lucy hug Edmund and then a shot of Lucy crying fades into it and then out again. Do you know how to do that with Adobe Premiere Elements? And also, how is that color achieved from the very beginning of the video? And is there any way to do audio effects? If you could please answer these questions I would appreciate it ever so much!
Thanks!

John T.,
Thanks. I should have added that info.
What does that little "scene" look like to you? I'm thinking a Video Clip on a higher Video Track, and maybe with less that 100% Opacity. Guess that if it covers the whole Frame, it would not be a PiP, officially, but would involve the same principles.
Appreciated,
Hunt - who sometimes gets lost in acronyms and jargon!

Can I use the songs that come with adobe Premiere Elements for commercial use/film?

Can I use the default songs that come with adobe Premiere Elements for commercial use; such as in a film?

C. Raio
We are not Adobe here. Rather user to user.
In the threads that I have read here the following is the user to user reply on this matter that is seen regarding project assets....Music Scores in this case....
The Music Score soundtracks are from the Adobe Premiere Elements (12 or 13) Music Score selections within the program.
And, they can be used in the users choice of export. As for "authorship", I guess you would point to Adobe, Premiere Elements version, Music Score.
Would the evaluators settle for the above information?
ATR

Problems with Adobe Premiere Elements 10 silent installation with SCCM 2007

Similar Messages

Maybe you are looking for