Problems with Air ver 2.51 on OS X 10.6.6

Hello All,
I had Adobe Air installed with three applications: Zinio, Mindomo & Prezi. Everything was working fine. I upgraded my Mac OS X leopard to Snow Leopard. Zinio asked to be upgraded to 4.0 and upon upgrading the app I was asked to upgrade to Adobe Air 2.5.1. After upgrades I receive the following error when I try to run any of the applications : "This application requires a version of Adobe AIR which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/go/getair, or contact the application author for an updated version." followed by a crash, here is the crash report: http://www.box.net/shared/b003opfbmo
I have tried the above steps, including uninstalling the applications, adobe air, running the terminals commands and then installing all again. Can anyone help?
P.S. the same reproduces on another administrative account on the same machine.

Yes, that's how it's supposed to work. Virtual PRIVATE Network, it doesn't connect to the internet. Try connecting at home the same way you do at your friends, WITHOUT the VPN, and you should be able to access the internet ok. You'll need to reconnect the VPN if you want to do any work. It's a pain, but that's the way it is - and the only solution is at the other end of the VPN, at the university. They may well allow internet access at the university, from their own network, but does it block **** or gambling sites? Then it's not going direct to the internet, it's going through their server first. If you're connecting from outside the university, that's another step removed, and the set up will be different. Talk to the IT people at the university, they're the only ones who can help.

Similar Messages

Problems with AIR-BR1310

Hy,
I have problems with AIR-BR1310.
When the bridge boot this is the sequence on LEDs indication :
Sequence 1: R-blinking green S-blinking green E-off I-red
Sequence 2: R-off , S-green, E -red, I –red
and the sequence continue.
I connected a laptop at console port on power injector but in hyperterminal I cannot see anything.
I changed the power injector and the symptoms was the same.
To function properly the correct sequence 2 for LEDs indication should be:
Sequence 2: R-off , S-green, E-green , I –red
What does it mean?
What i can do ?
It ' s possible to resolve this issue?
Thanks.

Hi,
The below link will answer ur question..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1099822
lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Problem with prod. ver. explosion to production order

Hi
I have problem with production versions. I have FERT with 3 production versions. Additionaly we have Z-program (on Z-table) which control parameter sold to party (from sale order) with production version. So after MRP I see in planned order right production version for example 3 - field PLAF-VERID; in master data in planned order I see right alternative BOM and routing; but when I make a conversion to production order I see that system always explode 1st version; additionaly in planned order in components (button) I see 1st pr.ver (1st alternative BOM) and in Bill of Material (it seems like to manually expolding BOM) I see right version??? But it couldn't be like this that to have right data I need to go to transaction MD12, explode BOM manully, save and after that make a prod. ord.
I would like to system explode BOM according to production version (field VERID) already in planned order; so after that it should be that when I will converted it to production order I should have right BOM and right routing from production version signed in planned order.
I know it sounds complicated Add. in configuration all parameters are set right to explode BOM etc. etc. system version: 4.7
Thanks and regards. Joanna
Additional info: I cancel this question cause problem is in Z-program; becuase when according to Z-table system change input in field VERID for system it is only "digital" not parameter for which system should explode right BOM; sorry for disturbing, we need to change Z-programm; I do not know how but maybe any function module can help - we will think. Regards
Edited by: Kostkaj on Aug 17, 2010 10:25 AM

HI
Check this link and find valuable suggestion by Mr Mangalraj regarding selection of PVs
Produciton version selection in MRP
Regards
Anupam Sharma

FileStream problem with AIR deployment

I use FileStream to load local XML file. When I test the desktop application directly from Flex everything is ok but when I install it with AIR, the application work but the file is not loaded. Here is the code I use:
import flash.filesystem.*;
var applicationDirectoryPath:File = File.applicationDirectory;
var nativePathToApplicationDirectory:String = applicationDirectoryPath.nativePath.toString();
nativePathToApplicationDirectory +=
"/config_poste_temps.xml";
var file:File = new File(nativePathToApplicationDirectory);
var fs:FileStream = new FileStream();
fs.open(file, FileMode.READ);
var config:XML = XML(fs.readUTFBytes(fs.bytesAvailable));
fs.close();
plan.text = config.division;
Regards

I am having the same problem as simon_lucas although my config is slightly different:
FlashBuilder 4 with SDK 4.6, Current app is with SDK 2.5.
Trying to update with SDK 3.2, I double-checked per Horia Olaru that I do use the application updater swc:
<path-element>D:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0 - Air 3.2\frameworks\libs\air\applicationupdater.swc</path-element>
<path-element>D:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0 - Air 3.2\frameworks\libs\air\applicationupdater_ui.swc</path-element>
But I still have the 16815 error.
If I change the update.xml to be <update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
instead of <update xmlns="http://ns.adobe.com/air/framework/update/description/3.2">, I am proposed to download the new app and then I get an error 16824.
Please HELP!

Problem with air 2.5 renderization

Hi,
I have a problem with the renderization of imagens when in the computer is instaled and air version bigger than 2.6. When oi run my app in debug i have no problem and save and jpg with the correct color tone, but when i export and install the app if i have the air 3.3 for instance the image save have a different tone that the one in debug mode, or i i install the air 2.5 in my computer the same app saves the jpg correcty , exactly the same as in debug, sample imagens:
Image with air 2.6:
Image with air 3.3:
If you note the image with air 3.3 installed the tone of the image isn't correct, can anyone tell me how to avoid this or the solution its just not to update the air version in my computer.?
Thanks in advance
Alex

Hi,
Just for the record i have opened a new bug in the bugbase https://bugbase.adobe.com/index.cfm?event=bug&id=3219361
Tanks
Alex

Problems with AIR for DW extension

Is anyone having luck with the AIR for Dreamweaver component?
I've got it installed but I try to export an AIR project all I ever
get is stuff like this:
File does not exist: /Users/databell/Library/Application
Support/Adobe/Dreamweaver
9/Configuration/Temp/FlashElements/ImageViewer/application.xml

I am also experiencing problems. I am running DWCS3 build
3481, Mac OS X 10.5.4 on an Intel MacBook, and AIR 1.0 (the 1.1
updater page still provides v. 1.0 download) according to the file
info, and I've tried completely re-imaging my computer and cleanly
installing DWCS3, AIR, the extension, etc.
The problems are centered on either selecting an existing
certificate or trying to create a new one:
1. Select an existing cert ~ selecting a previously-created
certificate and entering in the *correct* password still results in
a "could not load keystore file (password may be incorrect)" error.
The cert is located one directory above the app folder, and it
works fine via the command-line adt tool.
2. Create a new cert, 1st attempt ~ attempting to create a
new cert and selecting to place it in a central project folder
within my home directory fails. I get an "unexpected failure:
/scott/Documents/Projects/Optimac.pfx (No such file or directory)"
error. Look closely at that path. The actual path I selected to
save this cert to is
"/Volumes/data/scott/Documents/Projects/Optimac.pfx." My disk is
partitioned and my home folder is located on the "data" partition,
whereas my operating system and applications are located at
"/Volumes/os." (Mac OS X 10.5 enables locating your home directory
on separate partitions, and I have not encountered any other
problems with this configuration since Leopard was released, up
until now.) It looks like Dreamweaver erroneously misconstrued my
home directory as existing on root ("/"). So...
3. Create new cert, 2nd attempt ~ if I create the new cert at
root ("/"), that process completes successfully, but then if I
select it and click "Create Air file" I get an "unable to create
temp file in output directory" error.
As is, I cannot create an AIR app in Dreamweaver.

Audio Problems with Air 2.0.2 in Linux

We're seeing an issue which appears to be a bug in the Air 2.0.2 runtime for Linux. When a video file plays [via VideoDisplay] the audio is heard but as soon as the video is finished, audio cuts out for the entire application. We ran strace() and noticed Air opens the audio connection at the start of playback and closes it at the end, but will not re-engage audio for any other reason while the application is running. This includes running different videos or even just playing sound effects.
Has anyone seen this behavior where when a video is complete, the audio stops all together for the application? We did not have this problem before Air or in Air 1.5, so I suspect this is a bug in the Air 2.0.2 runtime for Linux.

Hi,
I also tried playing 2 videos via VideoDisplay one after the other using the following code:
<mx:VideoDisplay
id="video1" source="/assets/videos/vid1.flv" autoPlay="true" width="400" height="400" x="50" y="20" complete="video2.play()"/><mx:VideoDisplay
id="video2" source="/assets/videos/t.mov" autoPlay="false" width="400" height="400" x="550" y="20"/>
For me, the audio plays fine for the both the videos on Ubuntu 9.10.
Could you please provide the following information:
1) The Linux distro you are on.
2) The sound mixer you are using and its version(ALSA/pulseaudio).
3) It would be really helpful if you could provide your application/part of source code where you are playing the videos.

Problem with AIR Bundled Distribution on Windows 7 (Error #5100)

We've just finished an application and have set up the bundled distribution for the Installation of AIR and the Application. It works fine on Windows XP, Vista, and too on MAC OS X.
On Windows 7 however, it doesn't install. It loads the installer, and gets to the stage to ask for user options (installation dir etc), and then after this when installing (both AIR and application) - somewhere, it dies with the following error (Error #5100)...
Sorry, an error has occurred.
And error occurred while uninstalling the application. Try uninstalling it again. If the problem persists, contact the application author.
Any solutions to this? Thanks.

Hi,
Is it possible to get the application installer log?
Moved discussion to the Installation Issues forum.
Chris

Possibly graphic problem with air mid 2013

Hi
I bought in Miami the latest air, I5, with 128gb and 4 gb of ram.
one week ago i go a problem that id doesnt look good at all.
everytime the screen is off and turns on the first image that i see for a second is the typicall image of the graphic cards when they have problems, or the connector.
It is so fast that i cannot manage to take a snapshot.
I upload one similar image that I found.
my problem is i live in Malta (europe) and here the technical service is...where..i could say they never solv any problem.

The display or the GPU are damaged. The only solution is to take the MacBook Air to an Apple Store or reseller, but if you think resellers are not good in Malta, you can call Apple > http://support.apple.com/kb/HE57

Problem with air and .exe

Hello everyone!
I have a very big problem!
has developed a game in flash with as3 CS4.
is divided into 3 file .fla
1.fla 2.fla and 3.fla
1 call 2 , 2 call 3
uses an XML file to store the scores.
When i public the file .air, when i install the .air the is an exe and if use
var loader: Loader = new Loader ();
loader.load (new URLRequest ("squadra1_menu.swf"));
addChild (loader);
call a swf the xml file does not work.
loader.load and I can not recall. exe. . .
how can I do?
I'm desperate ....

Ok...I'm a jerk...
If I use
amxmlc.exe HelloWorld.mxml
It gives me an error...But if I use...
amxmlc.bat HelloWorld.mxml
Everything works fine...I needed the extra parameters -;)
Greetings,
Blag.

Update on playback problems with AIR 3.5 on desktop

Adobe has received reports that desktop AIR 3.5 users of BBC iPlayer and Digital Theatre Desktop Player are no longer able to play or download video after upgrading from AIR 3.4 or earlier. Specifically, the user will attempt to play the video and will get a black video window or will fail to successfully download videos. Adobe is working on a permanent resolution for the issue in AIR 3.5. In parallel, Adobe is working closely with the BBC and Digital Theatre to offer support and investigate interim resolutions. We will publish an update as soon as we have released the fix.
In the meantime, the work-around for affected users is to migrate back to AIR 3.4. The following link provides instructions for determining the version of AIR currently installed on your machine. If you believe you may be experiencing a video playback problem caused by migrating to AIR 3.5, your video service should be able to tell you whether they believe going back to AIR 3.4 or earlier will resolve the problem. If instructed to do so, the following steps here can help you uninstall your current version and locate and install a specific AIR version for installation on your Windows or Mac PC.
Please feel free to report your issue or reproducible steps here and we will alert you once a fix has been put in place. We sincerely apologize for any inconvenience and thank you for your continued support.

Please note that I have followed the BBC's instructions to uninstall Air v3.5 and iPlayer Desktop and then install Air v3.4 and iPlayer Desktop, but contrary to what they and you say, this has made no difference - iPlayer still can't download programmes to iPlayer Desktop and it still can't find the programmes I had previously downloaded. I surmise that maybe uninstalling wasn't enough and that some fault remains that still prevents the programme from working. I am not an IT expert, so I would need more comprehensive instructions to fix this.
You may like to note that I downloaded Air v3.5 several days before iPlayer Desktop failed, and I am pretty sure that I used iPlayer Desktop in between times. After it failed, it was very reluctant to even open, let alone do anything when, after repeated instructions, it finally did open.
You may also like to note that I began to experience a ridiculous amount of buffering on radio playback straight from the BBC website before and after iPlayer Desktop failed. I don't think it can have been a broadband issue, as I could stream both TV and radio live and I could stream TV playback with no problem. Since reverting to Air v3.4, I have had no buffering. I doubt whether this is a coincidence.
I have an Acer 5745PG with Windows 7, Intel Core i3-350M, NVIDIA GeForce 310M and I use Firefox.
Don't you guys beta test stuff?

Suddenly problems with air play

I have without any problems used airplay to see Danish television using screen mirroring from my Ipad to our TV- it worked perfect from day 1.
But the last week I get error messsages saying error while reading in the program, try later or can't do this a action.
I can still see all the old news and programs from last week on the television using airplay, but the news and programs which is about a week old and up to today I only can watch on the Ipad and not via airplay on the television.
Is it my apple tv/air play connection which is the problem ( it is conneceting to the Ipad ( white light) ? and if so any idea how to solve the problem? or is it the the Danish television who have changed something in the way they make their programs on line?

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
Sky block their App from working with AirPlay.

Problems with OS Ver 10.4.10

Since I updated to Tiger 10.4.10 I am having Keychain problems, having to enter a password to open Mail, and Safari is producing flakey messages as others have also reported.
I wonder if it is possible/practical/safe to reinstall Ver. 10.4.9 and if so, how does one do it?
I never experienced any Keychain issues in the past 3 years since switching from PC to Mac and I have a feeling that it is Ver. 10.4.10 that is the culprit.
Slater
iMac 20" Core 2 Duo Mac OS X (10.4.10) Powerbook G4 17"

to revert back to an earlier version of the operating system you need to use your install disk and use the archive and install feature. search support for "archive and install" for more information.
Archive and install will save all your files and settings and put you back to what your system came with.
After that is done you can go to Apple Downloads and pick up whatever 10.4.9 combo updater is appropriate for your machine, there is one for non-intel macs and one for intel macs. download that update. After that you can use software update to pick up the rest of the updates you previously had, BUT I would NOT PICK UP the 10.4.10 update or 10.4.10 combo update until there are confirmations of it being fixed.
i have done the above procedure and it solved my problems.
jim

Problem with weblogic ver 8 sp 4 installation on Solaris 10

Hi ,
I tried install weblogic ver 8 sp4 on solaris 10 .With the installable net_platform814_solaris32.bin ,I was able to succeed with the installation .However,the installation requires a internet connection .Is there a way to by pass this procedure.
kindly help

You can download platform installer. The package installer is approximately 475 MB.You can also refer to the following link under WebLogic Platform Distribution Methods
http://e-docs.bea.com/platform/docs81/install/prepare.html#1132881
- Ramkumar

Problem with air port

I am wondering if anyone can help me with network connection.. i bought a macbook and connected with network connection with no problem.. but the router went dead and i got a new router from linksys to d-link.. i had installed with the same network name and password from the old router to a new router.. now my macbook couldn't find or get through network connection.. how can i disconnect the name and start all over again..
Thank you.

i have only previously worked with netgear, but i assume the principles are similar.
then use a ethernet cable to hook your mac up to the router and configure this way.
this should enable you the add your mac to the list that can access the wireless function of the router.
when you set it up, give it a new name to any previous(so you can identify it as a new connection.)
hopefully this helps
yuey

Problems with Air ver 2.51 on OS X 10.6.6

Similar Messages

Maybe you are looking for