Problems with Airplay since last IOS6 update?

Since the last IOS6 update my IPAD2 and IPOD 3rd gen have both lost the airplay icon. They were both working well with my Apple TV prior to update. My IPAD had to be restored following update also. Is anyone else experiencing the same kind of problems?

Trouble shooting AirPlay
http://support.apple.com/kb/TS4215

Similar Messages

  • Problem with airplay since iOS 8 update.

    Since updating my devices (phone, computer, and apple tv) all the devices are incapable of airplay or using remote between each other.
    I have re-logged in, turned home sharing on and off, restarted. You name it, and nothing has worked. It seems as if this is a problem from the update that hopefully will be fixed. any info on this would help immensely.

    yes - this was reported by several customers! Here you can see that I´m not the only one with this problem ....

  • Problem with LiveChat since last Muse update

    We have Livechat installed on our site through simply inserting code into the html head via page properties. Prior to the latest Muse update, we could see the Livechat window inside Muse in both design & preview mode. Now it does not appear at all, even when exporting to html on my desktop, the Livechat window does not show up on the site. The strange thing is from my Livechat control panel, I can see myself browsing the test site...but from the browser perspective, there is no Livechat option. I tried reinserting the code, but still no go. Any ideas? I'm worried if i take the site liveI would  risk Livechat disappearing on my live site, so for now I have kept it just as a test site on my desktop.

    Restart your mac
    Safe Boot: Hold down the shift key after the chime until the Apple logo appears and the gear is moving.
    It will take awhile but you will be asked to login.
    Go to your Applications folder> Utilities and launch Disk Utility.
    In the left side column, highlight your drive and repair permissions.( button down below)
    Empty the trash.
    Restart your mac.
    hpr3

  • [solved] Problem with HPLip since last update

    Hi,
    since last system update my printer (HP LaserJet M1212nf) which is shared via network does not work any longer. Scanning via xsane works only printing is affected.
    Everytime if I want to print any document all I'll get is something like this:
    http://privatepaste.com/download/c84615c35d
    There isn't any error message or similar. Printing starts as expected, but the result would look like above
    hplip 3.12.4-1 and also the required plugin is installed correctly.
    kernel 3.3.7-1-ARCH
    cups 1.5.3-3
    Can anyone help me?
    regards,
    gnux
    Last edited by gnux83 (2012-06-02 21:50:10)

    I have no clue what happened between updates but it seems that my printing is borked.
    First off, details:
    HP Deskjet F4140, using the hpijs ppd file that comes with hplip. I've tried printing in LibreOffice and vim. Both produce this strange page:
    http://imgur.com/G6Ex6
    I'm at a complete loss for what to do. I've tried removing all the printers from CUPS, unplugging and replugging the printer, hp-setup, etc. I even tested the "device" tab under Printer Options and tried to make it use Postscript instead of PDF. I think there's something wrong in the configuration and I don't know where to look or what to search for on the net. I tried searching for various phrases here on the forum and the CUPS wiki page had nothing on this subject...
    Help?

  • Does anyone get daily newsletter from Living Rich With Coupons and found a problem reading them since last 2 updates?

    Problem with daily emails from Living Rich with Coupons

    IT is an IPAD  gmail issue not a LRWC problem. My IPAD AIR that I did not update works fine. It is only my IPAD AIR that I updated.this is the strange problem...This site sends me very long daily emails. In the body of the email on the top when you would click on an item a line would come up on top where you could then go and read whole entry. After the update this does not show up on top. You have to scan down the entire email. I understand that if you do not get this daily email you have no idea what I am talking about. It is just driving me crazy and was hoping someone could help.

  • Too long printing process with Mail since last system update

    Since the last system update about a week ago, it takes forever for Mail to process an e-mail to the printer (about 30 seconds).  Most of the time, the emails only include text.
    This only happens with Mail.  I daily use FileMaker Pro, Excel, InDesign,... and only have this problem with Mail.
    My printer is a Xerox Phaser 6360 and I have a new iMac with an OS X V.10.8.3
    Can someone help ?
    Thank you
    Diane

    Do you have any Mail plugins in the ~/Library/Mail/Bundles folder? Perhaps there is an incompatibility between them and Parental Controls?

  • Apple Support Communities  /  iBooks  /  iBooks for iOS Videos in iBooks don't start while mirroring with AirPlay since iOS 8 update

    Since the iOS update to iOS 8 the iBook I sell in the iBook-store don't play any Video while mirroring with AirPlay. It´s not even starting the video via AirPlay if I push play. If I start the video with the "open-gesture" with two fingers it starts - but only the sound. Since this is a schoolbook the AirPlay mirroring of Videos is quiet important to me. With iOS 7 everything worked fine. Even if export my iBook from iBooks Author on my computer everything works fine. But if I upload it via iTunes Producer and download the book from there store (like a regular costumer), it doesn't work anymore. I've checked the specs of all my videos - everything should be fine. Also iTunes Producer only accepts m4v and mp4 videos (they are all) - there is no warning that something is not correct if i upload my book to the store. I tried a lot ... i used the built-in encoder on MAC OS X Yosemite, I also used Quicktime and some open source programs to code my videos...but nothing worked. I'm really desperate...does anybody has a similar problem..? 

    yes - this was reported by several customers! Here you can see that I´m not the only one with this problem ....

  • Problems with printing since latest Reader update

    We've been having problems with form printing since the latest update for Reader came out.  We keep getting:
    Font Capture: AcroRd32.exe - Application Error
    The instruction at 0x69bf95ec referenced memory at 0x3ff0001c. The memory could not be read.
    We can go back in and print the forms individually - but this has become a real problem.  Everything works fine when we removed 11 and went back to version 9!  Any guidance on what to do?

    You might try (carefully!) reverting to the drivers found in the original distribution of MacOS 10.4 by following the instructions at:
    Christian Bonato, "Airport broken since 10.4.2" #2, 10:10am Jul 13, 2005 CDT

  • Problems with touch keyboard after ios6 update.

    After the ios6 update, my touch keyboard doesn't work well with certain apps. For example, in pages and Facebook it doesn't push up to reveal the typable area so I can't see what I'm typing. In numbers, I know longer see the old typable area right above the keyboard with the function option and such. Also the automatic cell setting don't work properly. For example, when I put in a date it only lets me change the month. What can I do?

    Try reseting all the setting on the device.

  • I have several problems with Airplay since iOS8.

    I have an iPhone 6, iPad Air, AppleTV and a Sony airplay speaker. Since iOS 8 none of the combinations is working fine.
    iPhone - AppleTV: music stops after 1 second
    iPhone - Sony: connects, but not playing. After rechoosing the internal iPhone speaker music doesn't play either
    iPad - AppleTV: music stops after 1 second
    iPad - Sony: music is playing but stops when the display turns off
    Any idea how I could fix this?

    Hey mizant,
    Thanks for the question. I understand that you are experiencing issues with AirPlay. The following resource may provide a solution:
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    http://support.apple.com/kb/ts4215
    Thanks,
    Matt M.

  • Problem getting calls since last software update iphone 4s

    Since latest software update my 4s wont ring unless the phone is unlocked, the missed call showes in notifacations right away, is anyone else having this issue?

    Are you sure that "Do Not Disturb" setting has not been accidentally turned on ?

  • Problems with Wireless since last update of NetworkManager

    Hello Everyone,
    Yesterday I updated NetworkManager (and also, wpa_supplicant if I remember right, and kdeplasma-applets-networkmanagement). The problem now is that I connect to my Wireless and then after a few seconds (maybe 1minute max), I can't use my internet connection anymore, but the applet says that it is still connected. To make it work again I need to disconnect and then re-connect again.
    Here are the information I can give :
    lspci
    03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network
    Kernel.log
    Sep 10 19:10:02 localhost kernel: [ 1324.198049] wlan0: authenticate with 2c:b0:5d:b8:76:b2
    Sep 10 19:10:02 localhost kernel: [ 1324.210490] wlan0: send auth to 2c:b0:5d:b8:76:b2 (try 1/3)
    Sep 10 19:10:02 localhost kernel: [ 1324.212868] wlan0: authenticated
    Sep 10 19:10:02 localhost kernel: [ 1324.219892] wlan0: associate with 2c:b0:5d:b8:76:b2 (try 1/3)
    Sep 10 19:10:02 localhost kernel: [ 1324.223747] wlan0: RX AssocResp from 2c:b0:5d:b8:76:b2 (capab=0x411 status=0 aid=1)
    Sep 10 19:10:02 localhost kernel: [ 1324.223829] wlan0: associated
    Errors.log
    Sep 10 18:48:09 localhost /usr/sbin/crond[435]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
    Sep 10 18:48:10 localhost NetworkManager[401]: <error> [1347299290.630837] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
    Sep 10 18:48:19 localhost kdm_greet[563]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
    Sep 10 18:48:45 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:48:46 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:54:24 localhost kernel: [ 385.834000] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:54:24 localhost kernel: [ 385.834011] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:54:27 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:54:36 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:56:06 localhost kernel: [ 487.895676] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:56:06 localhost kernel: [ 487.895686] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590311] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590324] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590329] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:43 localhost kernel: [ 765.332093] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:04:52 localhost kernel: [ 1014.346686] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:04:52 localhost kernel: [ 1014.346696] ath: phy0: TX while HW is in FULL_SLEEP mode
    [maria@Maria-PC ~]$ iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"CABOVISAO-EA70"
    Mode:Managed Frequency:2.412 GHz Access Point: 2C:B0:5D:B8:76:B2
    Bit Rate=39 Mb/s Tx-Power=16 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=44/70 Signal level=-66 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:4 Missed beacon:0
    Thanks in Advance,
    Luis Da Costa

    Similar symptoms here. However, my problem was not solved by downgrading networkmanager (tried to networkmanager-0.9.4.0-6, same issue here).
    nm-applet correctly lists available interfaces and tries to authenticate to my AP, gets an IP right away but straight after I lose it and then it looks like it's trying to reconnect for a long time. Sometimes it seems like I connected after a while and get an IP, but can't really do anything except ping my own IP.
    lspci:
    03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    rfkill list:
    0: asus-wlan: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    1: asus-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
    2: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
    errors.log:
    Sep 11 10:45:13 localhost NetworkManager[1770]: <error> [1347353113.507334] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
    Sep 11 10:45:13 localhost dhcpcd[1775]: eth0: sendmsg: Cannot assign requested address
    Sep 11 10:45:14 localhost kernel: [  926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:15 localhost dhcpcd[1816]: wlan0: sendmsg: Cannot assign requested address
    Sep 11 10:45:25 localhost kernel: [  937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:37 localhost kernel: [  949.224720] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:37 localhost kernel: [  949.227004] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:40 localhost kernel: [  951.331039] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:40 localhost kernel: [  951.331753] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:45:52 localhost kernel: [  964.248318] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:52 localhost kernel: [  964.248936] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:04 localhost kernel: [  975.841375] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:04 localhost kernel: [  975.841916] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:08 localhost kernel: [  980.055647] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:08 localhost kernel: [  980.056881] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:10 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:46:24 localhost kernel: [  996.151206] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:24 localhost kernel: [  996.152140] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:36 localhost kernel: [ 1008.052517] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:36 localhost kernel: [ 1008.053539] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:46:52 localhost kernel: [ 1024.155202] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:52 localhost kernel: [ 1024.155824] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:47:04 localhost kernel: [ 1035.752317] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:47:04 localhost kernel: [ 1035.753108] ath: phy0: TX while HW is in FULL_SLEEP mode
    kernel.log:
    Sep 11 10:45:13 localhost kernel: [  924.885910] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Sep 11 10:45:14 localhost kernel: [  925.939685] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:14 localhost kernel: [  925.952192] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:14 localhost kernel: [  925.954290] wlan0: authenticated
    Sep 11 10:45:14 localhost kernel: [  925.961756] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:14 localhost kernel: [  925.966830] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:14 localhost kernel: [  925.968369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Sep 11 10:45:14 localhost kernel: [  925.968430] wlan0: associated
    Sep 11 10:45:14 localhost kernel: [  925.976822] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:14 localhost kernel: [  926.005689] cfg80211: Calling CRDA to update world regulatory domain
    Sep 11 10:45:14 localhost kernel: [  926.006412] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:14 localhost kernel: [  926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:15 localhost kernel: [  927.055728] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:15 localhost kernel: [  927.068456] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:15 localhost kernel: [  927.071092] wlan0: authenticated
    Sep 11 10:45:15 localhost kernel: [  927.081434] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:15 localhost kernel: [  927.086812] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:15 localhost kernel: [  927.087724] wlan0: associated
    Sep 11 10:45:25 localhost kernel: [  937.086690] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.122145] cfg80211: Calling CRDA to update world regulatory domain
    Sep 11 10:45:25 localhost kernel: [  937.123996] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124517] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:27 localhost kernel: [  939.175379] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:27 localhost kernel: [  939.187967] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:27 localhost kernel: [  939.190312] wlan0: authenticated
    Sep 11 10:45:27 localhost kernel: [  939.197572] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:27 localhost kernel: [  939.201946] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:27 localhost kernel: [  939.203598] wlan0: associated
    All with latest network-manager. I might add that it was some months since I actually used wireless on this computer.

  • Problem with Airplay since Yosemite update

    When I connect my MacBook Pro to my TV thank to the airplay to watch moovies I have static noise
    This problem started yesterday when I downloaded the Yosemite update
    What can I do to improve the sound ?
    Thank you in advance for your help !

    When I connect my MacBook Pro to my TV thank to the airplay to watch moovies I have static noise
    This problem started yesterday when I downloaded the Yosemite update
    What can I do to improve the sound ?
    Thank you in advance for your help !

  • Detect edges problem with brushes since 3.2 update

    When using any of the brushes with the detect edges on with a raw image, they start to apply the change with a small area of the image effected but then stop applying the effect. If the colour overlay is turned on a straight line is seen were the affect has stopped being applied. turning of detect edges returns the brush to its normal function. This problem is making the detect edges function unusable and very anoying as I do use this a bit. This has only happened since upgrading to version 3.2.

    That's a good news! Seems, that the massive protest of the users has been heard!
    Could you please check the behavior of the crop tool? In Ap. 3.1.3 when I grabbed the crop-frame on one of the middle handles only that side of the frame was moved. In Ap. 3.2 the opposite side moved too.
    An example: grab the middle handle on the right side of the frame and move it to the right.
    Aperture 3.1.3: the right border follows the mouse, the upper and the lower frame border goes up resp. down by resizing the crop-frame.
    Aperture 3.2: the right border follows the mouse to the right side and the left border goes to the left side, the same amount you move the right frame border to the right side.
    What about Aperture 3.2.1???

  • Problem with screen since OS 2 update

    Hi,
    Since updating to OS 2 the top left hand corner of my playbook screen has a red edge as if the screen doesnt quite reach to the corner end???? Any advice on this?
    Thanks

    It's an alert.
    Do you have any pending messages or exclamation mark alert symbols?  Mine finally went away when I read all emails.  Try going to Messages -> Settings -> Display and ctions, and turning off both alerts.

Maybe you are looking for