Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Similar Messages

HT1491 after buying songs from itune it will not let me download the songs

After buying songs from itune it will not let me download the songs to my ipad

Hello there, Kimmy196640.
The following Knowledge Base article offers up some great recommendations for making sure the download just wasn't interrupted:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the issue persists, then you can use the information in this article for downloading your purchased content:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My sons ipad is older and will not upgrade past ios 5. can someone help me with this?

my sons ipad is older and will not upgrade past iOS 5, therefore he is unable to download certian games. does anyone have any suggestions or help that they can provide to me regarding this software issue?

The original iPad cannot be upgraded beyond iOS 5.1.1. It simply doesn't have the hardware. There are still lots of apps in the App Store that will run on iOS 5.1.1.
You can also try downloading the apps he's interested in to iTunes on your computer. Then, go back and try to download them on the iPad. If the developer makes an older version of the software available, you'll be given the option to download that. Note that not all developers continue to offer older versions.
Best of luck.

Skype problems with Airport Extreme after update

I use Skype to call regular phones and landlines. For over a year now it has worked well with my Airport Extreme, however, I noticed that around the same time I updated my Airport utility to 5.5.2 and Mac OS X update on 1/7/11 I am having problems with audio getting scrambled, the person on the other end dropping out, and my voice dropping out of their calls and the sound of me "being in a long tunnel," as they describe it. If I plug the ethernet directly into my computer there is no problem so I know it is the Airport base station.
I have tried plugging and unplugging the base station and I had comcast reset my cable modem but nothing seems to be working. I have 12 mbps internet so I know it is not a bandwidth problem.
Please help! Thank you!

Indeed I have the same problem. I ended up buying a new router because I thought mine was malfunctioning. After buying the latest generation Airport Extreme, turns out it's having the same problem. I agree that it was not a problem until 5.5.2. Also, I use YouSendIt constantly and it also chokes the Airport Extreme. It appears to happen in scenarios of high bandwidth usage.
5.5.3 maybe coming soon?

Having problems with Verizon iPhone 5 using excessive data. Verizon will not help can anyone give me advice? Have family plan never went over 8gb of data in 6 years, now avg 14 a month and are not using anything different other than having iPhone 5.

Switched to iPhone 5 on July 31st. Since then our data usage has doubled. Verizon will not help find out what the problem could be, they claim they are unaware of a problem. I told them to look on the customer support page and many have complained about the problem. Now on the apple site I see it may be an apple problem. Some one needs to fix this. Apple you want us to use your products, please do t make it cost us more money just to do what we did prior without problems. Prior phones were iPhone 4 and we never had issues and never went over 8 gb's for 4 phones. Now we are doing 14. Can anyone tell me what is going on. Getting ready to stop using cell phones all together.

Well you could Restore it from your backup and see if that helps. If it doesn't Restore it as new and manually add things back until the problem starts again.
I would also suggest trying a different SIM.
Without iOS 7 there is no way to isolate what is using the data.

Just had problem with frozen up Mac computer corrected,now HP printer will not print. Says printer not connected. What is wrong? Everyday a new problem., help.

JJust had problem corrected due to frozen imac, now HP printer will not print. Says it is not connected. What do I do to fix it?

To reset the printing system:
Choose System Preferences from the Apple menu.
Choose Print & Scan from the View menu.
Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
When you've done the above you'll need to re-add the printer by clicking the + (Add printer)

HT6058 why my iphone 5 had a problem with wifi when after update version? before my iphone 4 also had the same problem until now my iphone 4 is just like ipod or sometimes can not use like stone.

Please tell me why wifi can not access when after update. sometimes known just only a wifi name but other search can not found.

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

I have problem with polish letters after thunderbird reinstalation. Font seems do not see it ..

I can write mails in my native hovewer when i receive feedback Instead of Polish letters i see "chinesse bushes"

What version are you using?
What is selected at View | Text Encoding?

After installing version 3.66 Firefox will not let my users update to a newer version

Every few months I go around to the office PCs where my users have normal guest rights (so they can not install applications). I log in as an Administrator and update programs as needed, including Firefox to the latest version (3.66). I've done this for years and Firefox always updates for them when they are logged in with their basic user rights. After I installed this version, everyone is getting an error that "there is an update available, but you do not have permission to install it". How can I fix this so the browser will update again for all my users.
== This happened ==
A few times a week
== I logged is Administrator on all the office PC's and upgraded everyone to version 3.66

Try following the steps detailed at [[Updates reported when running newest version]]

I cannoy download the latest version of Itunes it will not upgrade from the current version

I cannot upgrade my current version of Itunes to the current version Is there any help available?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Problem with Airport express N (2nd gen)

Problem with Airport express N (2nd gen)
Firmware 7.6.4
ISP - 20 Mbps ethernet cable
I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
ps sorry for my bad english

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Similar Messages

Maybe you are looking for