Problems with AirPort - WRT54GL (for a short time)

Hi!
If have an old MacBook with Core Duo (OS X 10.4.10, all updates installed). The last days I have more and more problems with my WLAN. I use a WLAN DSL-Router (Linksys WRT54GL with original firmware v4.30.7). The problem is, that after some time while everything works perfectly, AirPort is still connected to the WRT54GL, but I cannot reach the Router anymore (no ping, no tcp connection to the router or to any computer in my network or the internet). At the same time router works fine for other computers. When I disable AirPort and enable it again, it connects again and everything works fine again. Any idea what the problem could be? Before the problem occured for the first time some weeks ago, it worked perfectly for more than one year with the router (no firmware update). The WLAN signal strengh is between medium and strong.
The only problem I had with the router was, that I had to use WPA2, because WPA did not work for my MacBook. And it's not very fast, but that's not so important. The latest problems are really annoying, e.g. when I wrote a long email using webmail, the connection was lost and after I reenabled AirPort, the text was gone.
Does anybody know how I could find and solve the problem?
best regards
Andreas

You can't power it down from the AirPort Utility, but you could use the Timed Access feature to control when certain network devices can access the base station itself. Timed Access relies on the device's MAC hardware address and will control access to the router on a time basis.
You would find this feature on the AirPort > Access Control tab within the AirPort Utility.

Similar Messages

TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

Q. I have an IPAD air having problems with my email deleting after a short while without command.

I've had issues like this before.
I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

Problem with Airport wireless network utilising a Time Capsule. No internet connection?

Right, I have an Apple Mac and I am creating a Wireless network with an Apple Time Machine. I have had both devices for approx 2 years, they have be fine to date - until I now have the following issue: The Wirless network has been created and can be connected to but that network isn't then connected to the internet. IN have checked with the Cable network provider Virgin and there is a network without proplem provided to the Modem - I have also connected an ethernet cable to direct to the Mac and connected to the www, no probs. I have also asttempted to reset and set up my time capsule / airport again howver the same problem arises. When I go to network Diagnostics I Have a green light for the following; Airport, Airport Settigns, Network Settings,Network Settings, ISP then an amberlight for Internet and server.....Please assist!!!! Is this an ISP address issue. Welcome any help, Thanks in advance. Jimbob

Sounds like chaos..
How many outlets are we talking about and what specific equipment?
Do you really need routers on every one? How many clients do you use?
Basically there are three non-overlapping channels on 2.4ghz.. using more than three routers in the house is pointless as they will just interfere with each other.. range on 2.4ghz should be sufficient to reach at least half a normal house from one AP. If not there are better high power routers available.
And there should be just one device that is the main router.. all the other routers should be bridged/ wan bypassed so they are merely AP and switch. Otherwise NAT will cause issues to devices stuck behind a secondary router.

Charger that came with Ipad gets hot and only charges for a short time or not at all

charger that came with Ipad gets hot and only charges for a short time or not at all

Stop using it and Return it to the Place of Purchase and get it checked... ASAP...

Problem with keyboard shortcut for font size in CC photoshop. The incriments sometimes work, i.e it goes 1 points at the time, but sometimes it goes 10 or even 20 points at the time. It seems to be very random. Any thoughts?

Problem with keyboard shortcut for font size in CC photoshop. The incriments sometimes work, i.e it goes 1 points at the time, but sometimes it goes 10 or even 20 points at the time. It seems to be very random. Any thought

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error". I have uninstalled and re-installed software, It works for a short time then I get that error again when i go to open a file. Thank

@Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error". I have uninstalled and re-installed software, It works for a short time then I get that error again when i go to open a file. Thank you!

Without proper system information and other details like what files you work with nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
Mylenium

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

My iPod shuffle, which I prchased in 2009 only worked for a short time so I put it back in the box and just recently took it out. I will not charge and the power light does not come on. It was faulty from the start and thought I was out the money I paid.

My iPod shuffle only worked for a short time. It will not charge and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.

Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price. Won't hurt to stop by and see what they will do for you.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

I have a iMac that wont start up after it sits for a short time

I have a iMac that wont start up after it sits for a short time. I changed out the hard drive and reinstalled Leopard. If I mess with it a little I can get it to start up usually by repairing the hard drive with another computer, one time I just held down the P-R-option and command keys and it worked. Once its on it will restart no problem but if it sits for and hour or so it will get stuck either in the grey screen or blue screen. I also pushed the smu button but didnt work. Please help? Thank you.

For this type of question, we need to know which iMac you have. This forum covers G3, G4, and G5 iMacs that have different hardware, and any recommendations are better handled if people know which you have. For starters, do "About this Mac" from your Apple menu and look at teh processor type.
You also need to tell us the version of the Mac OS you have, also avaiabe from "About this Mac.
If the processor type says "Intel," you have a newer iMac that this forum covers and should report in the area for current iMacs here:
iMac (Intel)

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

Error in iTunes when I'm wanting to put a CD on my iPod to listen to for a short time

Hi,
My iTunes has been playing games with my mind. It makes me think that my iPod is full and it's not 'cause I have been taking off CDs and putting on just the CD that I want to listen to since my iPod can't handle much more since it's near full. Whenever I want to put a CD on my iPod that isn't on there yet I get this weird lookin' error in iTunes when I'm wanting to put a CD on my iPod to listen to for a short time. This is what it reads: "iTunes could not copy "song" to the iPod "Liz's iPod" because an unknown error has occurred (-50). See, my iPod can't hold too many more of my new CDs so what I'm having to do is when I want to listen to one of the new ones I can put it on, listen to it, take it off and put another new one on which I don't mind doing, but this error that I am receiving has been annoying me for a long time. I'm hoping somebody knows something about this 'cause my iPod is not full at all since I'm trying my best to keep it from getting there. One other thing, I rip my CDs in 192 and VBR. My iPod has AAC on there as well, but those are just my converted music downloads that I have downloaded over the years, but the AACs aren't the case. Just my ripped CDs. Does anybody know what this error is telling me?
Thanks,
Liz

Nevermind, I figured it out this morning. The CDs that I have ripped in 192 all load up good without errors and I just have to drag CDs that are ripped in VBR by transferring 2 songs at a time to get it all loaded up. That is weird, but thank goodness it had nothing to do with iTunes. I was just confused... that's all.

Black screen with cursor blinking for a long time before loading windows 7

Hey guys, i'm having an annoying problem with my macbook pro... i installed windows 7 using bootcamp and now i get a black screen with cursor blinking for a long time before loading windows... it *****, it takes about 3 minutes to get my notebook running
The first time i installed windows seven i did not have this problem... i already deleted the partition several times and installed windows again, but the black screen problem is still happening. i don't know what do
You guys have any tips? anyone with the same problem?? this ***** a lot. thanks

Hey Theoos..
Yeah, my version is not.. the first time i installed it was ok, but after 30 days it was asking for a key... then i installed a cracked version, and the cursor started blinking on start up, and took like 2 minutes...
I tested several cracks but with all of them happened the same.
Thanks

Problems with AirPort - WRT54GL (for a short time)

Similar Messages

Maybe you are looking for