Problems with ALE transfer HR - E-Recruitment
Dear Forum,
I have an issue when transferring organisational and employee data from HR to E-Rec. HR employee just created another OU, as she has been doing lots of time, but it doesnt trigger the update of E-Rec - so this change is not visible in Recruiter Tab in the portal. This is the first transfer issue.
Second issue is when transferring employees to E-Rec, a certain number of employee numbers are excluded (57 employees between 16154 and 16211) this doesnt make any sense to me. Why should an area be excluded, and where would this be maintained? One of the employees who cant get transferred to E-Rec is in this range, and I wonder if this could be the reason.
If anyone has any suggestion to this please let me know!
Thanks a log in advance,
Kind Regards,
Soren
Dear Forum,
I have an issue when transferring organisational and employee data from HR to E-Rec. HR employee just created another OU, as she has been doing lots of time, but it doesnt trigger the update of E-Rec - so this change is not visible in Recruiter Tab in the portal. This is the first transfer issue.
Second issue is when transferring employees to E-Rec, a certain number of employee numbers are excluded (57 employees between 16154 and 16211) this doesnt make any sense to me. Why should an area be excluded, and where would this be maintained? One of the employees who cant get transferred to E-Rec is in this range, and I wonder if this could be the reason.
If anyone has any suggestion to this please let me know!
Thanks a log in advance,
Kind Regards,
Soren
Similar Messages
-
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Problems with data transfer to CEN via SAPCCM4X agent
Hello!
We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
- new alerts can only be seen within alert history
- old alerts cannot be deleted
We checked the agents via RZ21 and also the appropriate log files do not get further information.
When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
Can some one help to solve this problem?
Thank you!As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
OS X: How to migrate data from another Mac using Mavericks -
Problem with file transfer via wi-fi!
Hi, folks,
Please, could someone help me to get a music file I made using Groovemaker app?
After finish the mix, I built a song. Then, I saved it in the "mix browser".
In the end of the exporting process, I typed the URL address displayed in the browser (http://192.168.0.188:5555/, on Firefox, Chrome and IE), but something gone wrong and, every time I export the same song - it's my first exporting action - I got a message such "The page hasn't loaded... limit time reached".
What's the problem with my wi-fi connection? Should I set something in my router? According to the company website (http://www.groovemaker.com/gmiphone/features/) this kind of wi-fi file transfer is easy, but not to me...
Thanks in advance!
AlexWhat type of errors is being generated? Are you trying to save that file on device memory or media card? try moving that file on media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Automatic message for problems with partner transfer
Hello gurus,
every 15 Minutes we automatically transfer new or changed partners from SAP ERP to GTS.
Now, if there is an error in one of those partners and they cannot be transferred successfully (e.g. because of missing or inconsistent address data), SAP retries to create/change that partner every 15 minutes.
Unfortunately, I cannot check the transfer logs five times a day for any errors that might occur.
Because of that, it sometimes takes several days until I come to discover the error. Until then, many, many transfer logs have been created, most of them containing only one entry. Furthermore, the particular partner cannot be used in SAP ERP until the error is resolved, because it is blocked by GTS.
Is there any way to create a message to me (via mail or in SAP), if there is an error with partner transfer?
Thank you
AliciaAn alternate option would be to create a custom program that would read the unprocessed change pointers in ECC ( these would correspond to the customer's that have not made it successfully to GTS) and run this program soon after your transfer program completes...
This will give you a list of customers not transferred to GTS..
Thanks
Jasmit -
So I did the upgrade version of Lightroom 5 from 4. I did the catalog transfer to move all of my images over from lightroom 4 to 5. But now when I click on any of my old images (from a lightroom 4 catalog) in lightroom 5, I get an error message that says Lighroom has a problem reading the images. Last night I tried to export from lightroom 5 to my desktop and it did not work with the same error message coming up. Help!!! What am I (did I) doing wrong?
-Once I put the disc in I followed the procedures to upload LR5. This was successful. The first time I opened LR5 I was prompted to transfer my old LR4 catalogs to LR5 which I did.
-Now when I click on any image, once I click away, in the lower scroll bar of images an exclamation mark in a small circle. When you click on the exclamation mark this message appears "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo." This happens to every image I click on. -
When i try to transfer a non zipped file or a pages file i've got this error, it's recent but can't tell you when. But I can transfer image (jpg, png...)
I've Chax version 1.4.8 for Mac OS X 10.4.3.
Impossible d’envoyer le fichier “Sans titre.pages” à XXXXX xxxxxx <[email protected]> :
Une erreur est survenue.
Your buddy cannot receive transfers of directories (folders). You could create and send a zip archive of the directory before sharing, or share each file in the directory individually.
Thx for your answerNo problem.
Unsubtle hint time.
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...
7:36 PM Friday; April 13, 2007 -
Problem with file transfer via Bluetooth
I have been trying to receive some large files (43Mb) via bluetooth from another device but always get transfer fail message. But i could receive smaller flies...
-Does this have anything to do with the device memory limit of 15MB?
-How can i receive larger video files from other devices using bluetooth?
-Does the BOLD have the same problem?
Please help.
ThanksWhat type of errors is being generated? Are you trying to save that file on device memory or media card? try moving that file on media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
TDMS4HCM - problem with Data Transfer
Hello,
When I am executing Start Data Transfer step system ends up with error - "Execution of program /1CADMC/OLC_000000000144318 failed, return code 2" or Z_PA0022_014: Function module "/1CADMC/OLO_000000000093370" notfound. For each table (f.ex. PA0000, PA0001, ..., or HRP1000, etc.) system generates such error message.
I tried to change Write Behaviour (all available options) but it doesn't resolve the problem.
Have you ever had such problem?
Thanks,
JerzyHi Harmeet,
The system was installed on sender and receiver system and it was running. The problem appeared when basis team perform system copy from production to test environment. Client which was used for TDMS was deleted so basis had to recreate it. from that point I have the problem. No additional settings where done for TDMS on receiver system afterwards.
In the receiver system we have installed add-ons: DMIS, DMIS_CONT and DMIS_HR (tdms and sender systems were not changed).
Should we install something else on receiver syst.?
Thanks,
Jerzy -
Problem with file transfer over the net
Hi!I'm trying to make a program that allows to send/receive files and I'm almost done,except for a little problem:the file received has some bytes missing at the end!
For example if I send a text the last 2-3 lines are missing,same thing for an image,an html document,etc.,although the file opens without any problem.As transport-level protocol I'm using TCP so it's not a networking problem,I think the problem is in the application layer so I post here the code,hoping someone helps me out(in this example I'm trying to send an image .jpg):
Sender:
Socket connectionSocket=new Socket("ipadress",port);
FileInputStream source=new FileInputStream(System.getProperty("user.home")+"\\Documents\\image.jpg");
BufferedOutputStream send=new BufferedOutputStream(connectionSocket.getOutputStream());
int c;
while ((c = source.read()) !=-1)
send.write(c1);
Receiver
ServerSocket receiverSocket=new ServerSocket(port);
Socket connection=receiverSocket.accept();
BufferedInputStream rec=new BufferedInputStream(connection.getInputStream());
FileOutputStream receivedFile=new FileOutputStream(System.getProperty("user.dir")+"\\received.jpg");
int c;
while ((c = rec.read()) != -1)
receivedFile.write(c);I think the problem is in this code:somehow the sender stops sending bytes before the end of the file is actually reached...what do u think?Thank you so much!At the end it was a very stupid mistake!:D
Btw now that the main problem is solved I continue posting asking for your opinion:is this program for you efficient enough?Or there's a better way to do file transfer? -
i downloaded an app on my iphone, and synced to my laptop but the app did not come over to the laptop. when i go to the app store on my laptop I cant even find the app to download it...?????
You seem confused with how things work.
Apps for iOS devices are sold in the iTunes App Store and are available through the iTunes app on your computer, as well as the Apps app on your iOS devices. The Mac App Store sells apps for Mac computers. Apps for Macs cannot be used on iOS devices and apps for iOS devices cannot be used on Macs.
Syncing does not transfer apps that you have bought on your iOS device to the iTunes content libraries. You must transfer purchases to do that. Right click on the name of the iOS device in the devices list in the iTunes app or go to the File pulldown menu in the iTunes app and choose to Transfer purchases. -
Iphoto problem with file transfer
hello i have a problem, i transfer my iphoto library from my brother account to my account, and when i try to open them i can't because my mac tell me that i don't have license and power to do that. I've tried to change sharing settings from my brother account and also from mine, but in my accounts files don't open,help me please.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair Library permissions.
-
Re Problem with Log & Transfer
When capturing using log & transfer,the media shows in transfer window but after adding it to queue it then shows in status button as no data? Can anybody help.
I have an imac 2ghz intel core duo memory 1gb using snow leopard 10.6 & quicktime 10.6 I have just installed a 2nd external hard drive seagate free agent goflex My camera is Sony HDR-XR105 AVCHD. I have been able to upload in the past ok but the problem has only occured since installing the extra drive .Connected by USB.
-
Problems with ALE filters...
Hi I have a situation I need to send materials to a partner only the materials specific for a particular plant.The filter in the distribution model is based on E1MARCM-WERKS.
change pointers are enabled.When material is changed may be some other fields which are not relevant to plant data the idoc is created with message function '018'(resend) and the E1MARCM segment itself is missing.So the filters are not verified and the materials which belong to other plants are also sent to the partner...
How can this problem be rectified...?
Thanks for your help
LarryHi Aber,
I have an wague idea, can't we put a condition like if WERKS is not initial or if WERKS = 'your filter value'. If any of these case is correct, it will stop sending the idocs.
shylesh -
Problem with Stock Transfer Order in Sales
Dear All,
The problem is related to STO where we have used the following configuration settings -
PO Document Type - ZUB (from standard UB)
Delivery Type - ZNL (from standard NL)
In the delivery type the assigned Sales Order Type - ZDL (from standard DL)
In delivery Item Category assignment is NLN which is a SAP standard.
In the outbound delivery we have the procedure of automatic batch determination active as a result of which two lines are generally reflected in which there is a Batch Header line with zero quantity & there is a Batch Item line with target quantity.In case of our commercial invoice only the single line i.e. batch item line with target quantity gets reflected & upon saving accounting document gets generated.But in case of STO Proforma invoice where there is no scenario of accounting the Batch Header Line with zero quantity along with the batch line item quantity is also getting copied.
In copying control TCode- VTFL the Settings between delivery type ZNL & STO Proforma Billing Type ZBST ( Copy of F8 standard bill type) for Item Category NLN in our system are as follows -
Copying requirements 009 DlvRel.proforma header
Data VBRK/VBRP 003 Single invoice
Billing quantity B
Pos./neg. quantity Blank
Pricing type G
PricingExchRate type Blank
Cumulate Cost - (greyed out)
Price Source Blank
Please suggest what needs to be done so that only the single line containing the batch line item with target quantity in the STO Proforma Invoice.
Thanks & Regards
Priyanka MitraIn VTFL, for main item category (NLN), in the field billing quantity maintain value G-Cumulative batch quantity minus invoiced quantity and for the batch split item category, keep value blank. Then test by creating new documents. Also refer OSS Note 77414 - Billing during batch split, which explains for normal item category. You can refer the settings for your scenario also.
Regards,
Edited by: Shiva Ram on Feb 8, 2012 8:52 AM
Maybe you are looking for
-
How do I use multiple screens with my MBP?
I have a 2010 MacBook Pro which I use for all of my video & music editing. I currently have the following accessories: MiniDisplay Port to DVI & MiniDisplay Port to VGA adapters. I also have VGA to DVI-D adapters that all work concurrently if I need
-
G4 laptop shows up / disappears randomly on both home and office network
I have a G4 laptop that I take between my office and home and for years have had no problem transferring files between it and multiple Macs at both locations. Something has happened in the last few days in which the G4 will show up sometimes on the b
-
Sobre Adobe Photoshop album 3.0
Bajé a mi ordenador el programa photoshop.. al final de haberlo instalado me pide un registro para un codigo.. y no lo recibo por e-mail.. alguin sabe a que se debe.. Gracias por su atención
-
Same synced drives, different remaining space - aaarrggghh!
This may not pertain to Mountain Lion exclusively, in fact i know it doesn't, but nobody (not even the manufaturer can explain this: I have two 2TB Western Digital Caviar Green drives both formatted on my mac pro. I typically use Decimus Synk to sync
-
Some Brazillian certificates are not accepted by Firefox
Some certificates from Brazillian Government sites are not accepted by Firefox