Problems with ALSA and Audigy 2

I have a Audigy 2 Value card in my box and it has been working fine under Gentoo, SuSe and Kubuntu. But with Arch I can't get it to work. I have followed the wiki and installed all the alsa stuff, but it won't find the card!
I can modprobe snd-emu10k1 and then all the modules show up when I check with lsmod. Dmesg tells me that there's a Creative Audigy 2 installed, but when I run alsamixer i just get
"alsamixer: function snd_ctl_open failed for default: No such device"
both as root and as a user. I've added the user to the audio group.
Running alsaconf just locks up Konsole.
I've tested this with both devfs and udev.
Running 2.6.10 and the latest alsa.
Does anyone know what might be wrong?
Should I compile a newer kernel?
Any help is greatly appreciated.
lsmod:
Module Size Used by
radeon 136340 0
i2c_nforce2 7040 0
i2c_core 23296 1 i2c_nforce2
snd_emu10k1 100868 0
snd_rawmidi 26144 1 snd_emu10k1
snd_seq_device 8972 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 78176 1 snd_emu10k1
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 101252 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer 27140 1 snd_pcm
snd_page_alloc 10244 2 snd_emu10k1,snd_pcm
snd_util_mem 4992 1 snd_emu10k1
snd_hwdep 10116 1 snd_emu10k1
snd 59108 9 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
soundcore 10848 1 snd
uhci_hcd 34576 0
parport_pc 28996 0
parport 38600 1 parport_pc
pcspkr 4044 0
rtc 13128 0
shpchp 100996 0
pci_hotplug 34748 1 shpchp
forcedeth 18560 0
usbhid 45824 0
ehci_hcd 35332 0
ohci_hcd 23560 0
usbcore 125560 5 uhci_hcd,usbhid,ehci_hcd,ohci_hcd
evdev 9984 0

you r lucky boy first kernel... all devices work correct ... great...
mattux

Similar Messages

Problems with ALSA and OSS

Hi.
I'm a ArchLinux user and I have been having problems with my audio, specifficaly the microphone.
My microphone works well with Audacity and I use it for speaking trough TeamSpeaker and since TeamSpeak still uses OSS I installed alsa-oss and added aoss to my TeamSpeak command. But, for some reason, the application stopped working (this have nothing to do with my real problem) and as substitute I installed TeamSpeak in Windows XP running on Virtualbox with ALSA audio. Everything worked smoothly until some weeks ago.
The microphone on Virtualbox stopped working but I still hear sound. And the funny thing is that TS Linux got working again, but if I use it with aoss I cannot use the microphone but I hear sound and to have microphone I have to use it without aoss but then i dont have sound on other apps.
And to get microphone on Virtualbox I have to enable OSS in preferences and use aoss but then, wich I don't understand why, I dont get any sound with other apps. :\
I have no idea what triggered this problem.
My audio device:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
ALC660-VD Analog

No one? :\
Not even why Virtualbox with OSS and aoss "steals" the sound to the other apps?

Big Problems with Vista and Audigy

Hello.
My name is Jana and I'm from Germany. This board is my last hope now.
I have big problems to use my audigy 2zs in Vista Business (32 bit).
I use the latest driver from 9.3.07.
The installation process works fine and I get no errors. But I can't start the AudioConSole . I always get an error, that no audio device was found (error message is german)?!? The device manager shows no problems and the audigy 2zs is correctly listed.
I need this AudioConSole to activate the 5. speaker settings. In the sound preferences in Vista is that not possible.
My speakers also need the creative software from cd to activate the bass, but I when I install this software and then restart, only a few programs are installed (but they don't work). I need especially the speaker settings but there is unfortunately no way to install this software.
I did this procedure at least 5, 6 or 7 times, but it always don't works.
So please can you help me?
Sry for my bad english.

Hmm... Try to redownload the drivers from the website, because Creative has updated them to include a proper signature. It is possible that the drivers do not load if they are not signed, which would explain why the AudioConsole does not launch. Also, Windows Vista does the Bass redirection by itself:? If you select 5. speakers from the standard Control Panel, you will be asked whether you have satellites or full-range speakers. Selecting satellites means that the lower frequencies need to be played by the Subwoofer instead. If that still doesn't work, you can do the following:? Extract the downloaded drivers using WinRAR (or similar) (right-click and then extract). Then go to the Subfolder "Drivers\wdm\common\i386"? and run "CtPanel.exe". From there going to the speakers tab there is a "BASS-M" option...

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Can't get 4.1 working with ALSA and Intel card

Hello everybody,
My problem is simple, but I cannot find any solution for it.
I have Arch Linux 64 bits installed with ALSA and a Intel onboard sound card
I can get the audio working simply installing ALSA and unmutting the channels, but I get no sound at the rear speakers and the center speaker (subwoofer).
I run:
$ spearker-test -c 5
And all I have is sound at the 2 front speakers.
Looking at alsamixer I only saw configuration for 2,4 and 6 channels. I am currently using the configuration for 4 channels.
I unmuted everything in alsamixer (playback) and nothing changed.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 23704 1
snd_hda_codec_realtek 59331 1
snd_hda_intel 25700 7
snd_hda_codec 97464 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 60021 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Anyone knows how to make it work? Thanks!

Thanks for the answer, tried this command, here is the output:
$ speaker-test -t wav -c 5 -D surround41
speaker-test 1.0.26
Playback device is surround41
Stream parameters are 48000Hz, S16_LE, 5 channels
WAV file(s)
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Is there something needed to make this command run correctly?

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problems with ALSA and Audigy 2

Similar Messages

Maybe you are looking for