Problems with ALV - 2
Hi All
The flow of my program is as follows
First one interactive report is shown to the user.
When he triggers the At line selection, I am creating editable ALV (using object methods i.e. using set_table_for_first_display) and the user can make changes to the values ,once he edits and saves the program takes him to interactive report again with refreshed values. Again if he wants to edit the list I am taking him to editable ALV again now the problem is here ,this time it is not saving the changes made by the user and the ALV is not saving the changes however if I again calls the ALV i can see the changed fig. on the screen. I used the refresh table method also but it is not working. I tried to free the memory used at the time of creating object for grid etc.
Any feedback?
Thanks in anticipation.
pM.
Hi All
You can also copy the css file in itsmobile to your internet service.
By putting the following code into the css and updating the gui config in sicf for the internet service you can remove the vertical scroll bar.
this problem only seems to happen when you use the mobile4 gernation style.
/* --- MOBILE BODY -
.MobileHtml
Similar Messages
-
I have a problem with ALV Grid User Command?
Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
WHEN 'ORDER'.
IF NOT wa_final-order IS INITIAL.
SET PARAMETER ID 'COK' FIELD wa_final-order.
CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PMhi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi -
Problem with ALV grid in edit mode
Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
MikhailHi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
CREATE OBJECT z_custom_container
EXPORTING
container_name = 'ALV_ZAC'.
CREATE OBJECT alv_grid
EXPORTING
i_parent = z_custom_container.
g_repid = sy-repid.
gs_variant-report = g_repid.
x_save = 'A'.
PERFORM check_alv_grid_fields.
ps_layout-cwidth_opt = 'X'.
ps_layout-edit = 'X'.
CALL METHOD alv_grid->set_ready_for_input
EXPORTING
i_ready_for_input = '1'.
* CALL METHOD alv_grid->register_edit_event
* EXPORTING
* i_event_id = cl_gui_alv_grid=>mc_evt_enter.
APPEND s_list_rec to it_list_rec.
CALL METHOD alv_grid->set_table_for_first_display
EXPORTING
is_layout = ps_layout
is_variant = gs_variant
i_save = x_save
CHANGING
it_fieldcatalog = pt_fieldcat
it_outtab = it_list_rec[].
CALL METHOD alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype = 'CHAR'.
* ls_fcat-inttype = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype = 'DATS'.
* ls_fcat-inttype = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM. " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid IS INITIAL.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = text-i01
txt1 = text-i02
txt2 = text-i03
txt3 = text-i04.
ELSE.
i_dat_reg = zrumm_prr-cdprr.
CLEAR is_temp_otc.
freshit i_prrpus_fax.
freshit i_list2_ot.
LOOP AT it_list_rec INTO s_list_rec.
MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
i_list2_ot-fgrup = 'RECE'.
i_list2_ot-prrnu = i_num_prr.
APPEND i_list2_ot.
MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
APPEND i_prrpus_fax.
ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM -
Problem with ALV filter functionality when filtered for multiple values
Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
FerozHi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz -
Problem with ALV search help Dictionary Search Help
Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
MikoHello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko -
Problems with ALV - Excel after changing from 640 to 710
Hi all,
first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
but i didn't get any answers, therefore i try it here.
I have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change the output to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
In 640 i don't have any problems. We have ECC6.
When i use GUI710 and SAP 4.6C i don't have any problems.
Simple Test is possible with SE16N and change ALV output to excel-inplace.
Can anybody help?
Thanks.
Regards, DieterHi Dieter,
we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
Have you tried to install the patch?
Bye
Giovanni Mortati -
Problems with ALV - Excel after changin from 640 to 710
Hi all,
i have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
in 640 i don't have any problems.
Can anybody help?
Thanks.
Regards, DieterHi Roman,
in Service.sap.com there is the first patch-level of the new GUI7.10.
i have install it without any problems.
The problem i had with excal-inplace is solved.
Regards, Dieter -
Hi ,
I am having a problem with Hotspot <<removed_by_moderator>>
I need to Open up SE16 and need to skip the first screen of the Table 'ZLE_WH01' and display the selection screen with the MATNR passed from my ALV Report.
I tried using Call Transaction and Submit commands, but couldn't achive my target.
when I used SUBMIT and pass the MATNR Value to the SE16 selection screen for the corresponding Table, the value is appearing in the MATNR field of the Selection screen but the Execute button is not working.
When I try the Call Transaction Method, the value is not capturing in the 2nd screen. Table name is capturing in the first screen.
Kindly advice me how to resolve this issue.
Regards,
Srinivas
Edited by: Vijay Babu Dudla on Feb 25, 2009 11:08 PMFor se16
Use fm SE16N_INTERFACE
a® -
Background task problem with alv grid display
Hello !
I have a problem when executing my program in background.
In foreground I have no problem, my ALV appears. In the background I have a dump.
The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be executed.
I use the function module 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'F533_USER_COMMAND'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = i_fgroup[]
i_save = 'X'
it_sort = gd_sort
i_buffer_active = ' '
i_callback_pf_status_set = 'F534_SET_PF_STATUS'
TABLES
t_outtab = mytab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I don't understand where the problem is. Please help me.
Thank you.I love replying to old threads:
Try this link
http://scn.sap.com/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job -
Hi friends,
I have created one program with alv list, but i am unable to add one header and footer, also i have to add one logo to the program. Plese some one tell me a easy procedure to add a header, footer and also a logo. If you can show me one with example that would be very helpful.
This is my program, plz add the necessary parts.
*& Report Y_BOM2_ALV
REPORT y_bom2_alv LINE-SIZE 350 LINE-COUNT 350.
*& Include YINCLUDE1
TABLES : mast, stko, stpo.
TYPE-POOLS : slis.
DATA : BEGIN OF iall OCCURS 10,
matnr LIKE mast-matnr,
werks LIKE mast-werks,
stlan LIKE mast-stlan,
stlal LIKE mast-stlal,
stlst LIKE stko-stlst,
posnr LIKE stpo-posnr,
idnrk LIKE stpo-idnrk,
menge LIKE stpo-menge,
meins LIKE stpo-meins,
ausch LIKE stpo-ausch,
lgort LIKE stpo-lgort,
END OF iall.
DATA : i_repid LIKE sy-repid,
i_lines LIKE sy-tabix.
DATA : int_fcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE title1.
PARAMETER : p_werks LIKE mast-werks.
SELECT-OPTIONS : s_matnr FOR mast-matnr.
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
title1(50) = ' Bill Of Material Input Screen '.
*& Include YINCLUDE2
START-OF-SELECTION.
SELECT mastmatnr mastwerks maststlan maststlal stko~stlst
stpoposnr stpoidnrk stpomenge stpomeins stpo~ausch
stpo~lgort INTO TABLE iall FROM stpo INNER JOIN stko ON
stpostlnr = stkostlnr INNER JOIN mast ON
stpostlnr = maststlnr WHERE mast~werks EQ
p_werks AND mast~matnr IN s_matnr.
IF sy-subrc <> 0 OR p_werks EQ ' ' OR s_matnr EQ ' '.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'ERROR MESSAGE ( INPUT ERROR / WRONG INPUT ) '
textline1 = ' PLANT / MATERIAL Invalid or Empty '
textline2 = ' Plese enter plant no / material no again '
start_column = 20
start_row = 5.
EXIT.
ENDIF.
CLEAR i_lines.
DESCRIBE TABLE iall LINES i_lines.
IF i_lines LT 1.
WRITE: /
'No materials found.'.
EXIT.
ENDIF.
END-OF-SELECTION.
i_repid = sy-repid.
*& Include YINCLUDE3
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = i_repid
i_internal_tabname = 'IALL'
i_inclname = i_repid
CHANGING
ct_fieldcat = int_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_repid
it_fieldcat = int_fcat
i_save = 'A'
TABLES
t_outtab = iall
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.Hi Tapodipta,
See below example and modify ur code according to ur requirement..
REPORT ZTEST_ALV_CHECK .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_END_OF_PAGE.
x_events-FORM = 'END_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = slis_ev_end_of_list.
x_events-FORM = 'END_OF_LIST'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
it_events = it_events
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
* BREAK-POINT.
WRITE: / 'TOP_OF_PAGE'.
ENDFORM.
FORM END_OF_LIST.
* BREAK-POINT.
"here you can use this for footer
WRITE: / 'FOR FOOTER'.
ENDFORM.
FORM END_OF_PAGE.
* BREAK-POINT.
WRITE: / 'END_OF_PAGE'.
ENDFORM.
Go through the link as well..
Re: ALV Footer
Hope it will solve ur problem..
<b>Reward points if useful..</b>
Thanks & Regards
ilesh 24x7 -
Hi,
I am using alv grid, there is a problem with print, when i look at print preview it shows only 1 row and even the values in that row are incorrect.
Please help me solv the problem.
Thanks,
Sai.Here is the code
*& Form DISPLAY
text
FORM display.
DATA : fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
*data : wa_fieldcat type slis_fieldcat_alv.
DATA : t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
DATA : cnt(3) TYPE c VALUE 0.
cnt = cnt + 1.
fieldcatalog-fieldname = 'XBLNR'.
fieldcatalog-seltext_m = 'Invoice No'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 8.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'BLDAT'.
fieldcatalog-seltext_m = 'Invoice Date'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 9.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
*CT3 No.
cnt = cnt + 1.
fieldcatalog-fieldname = 'SGTXT'.
fieldcatalog-seltext_m = 'CT3 No'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 8.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'MBLNR'.
fieldcatalog-seltext_m = 'GRR No.'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 10.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'BUDAT'.
fieldcatalog-seltext_m = 'GRR DATE'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 9.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'NAME1'.
fieldcatalog-seltext_m = 'Vendor Name'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 30.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 18.
fieldcatalog-tabname = 'it_final'.
fieldcatalog-no_zero = 'X'.
fieldcatalog-key = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
cnt = cnt + 1.
fieldcatalog-fieldname = 'MAKTX'.
fieldcatalog-seltext_m = 'Matdesc'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 30.
fieldcatalog-tabname = 'it_final'.
fieldcatalog-key = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
**Excise Duty
cnt = cnt + 1.
fieldcatalog-fieldname = 'EDUTY'.
fieldcatalog-seltext_m = 'EXCISE DUTY '.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 30.
fieldcatalog-tabname = 'it_final'.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
*Excise Duty
cnt = cnt + 1.
fieldcatalog-fieldname = 'DBDTY'.
fieldcatalog-seltext_m = 'DEBIT DUTY '.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 12.
fieldcatalog-tabname = 'it_final'.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
*Excise Duty
cnt = cnt + 1.
fieldcatalog-fieldname = 'CRDTY'.
fieldcatalog-seltext_m = 'CREDIT DUTY '.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 12.
fieldcatalog-tabname = 'it_final'.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
*Credit Date
cnt = cnt + 1.
fieldcatalog-fieldname = 'CRDAT'.
fieldcatalog-seltext_m = 'Cr. DATE'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 9.
fieldcatalog-tabname = 'it_final'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
*Closing Balance
cnt = cnt + 1.
fieldcatalog-fieldname = 'CL_BALANCE'.
fieldcatalog-seltext_m = 'BALANCE AMT'.
fieldcatalog-col_pos = cnt.
fieldcatalog-outputlen = 15.
fieldcatalog-tabname = 'it_final1'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP-OF-PAGE'
it_fieldcat = fieldcatalog[]
i_save = 'X'
TABLES
t_outtab = it_final[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "DISPLAY
Form TOP-OF-PAGE *
ALV Report Header *
FORM top-of-page.
*ALV Header declarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c,
v_date1(10),
v_date2(10).
Title
wa_header-typ = 'H'.
wa_header-info = 'B-17 BOND REGISTER - INDIGENOUS RAW MATERIALS'.
APPEND wa_header TO t_header.
CLEAR wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = ' Report generated on Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
APPEND wa_header TO t_header.
CLEAR: wa_header.
opening balance
wa_header-typ = 'S'.
wa_header-key = ' Opening Amount: '.
wa_header-info = gv_op_balance. "Opening amount
APPEND wa_header TO t_header.
CLEAR: wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "top-of-page -
Hi there,
i've got a little problem with my ALV header. every time when i run my program and want to go back to the selection screen with the BACK-button i see my header again. so i've got to push the BACK-button again to get to the selection screen.
here's my alv-code
FORM TOP_OF_PAGE.
REFRESH header_itab[].
CLEAR wa_header.
wa_header-typ = 'H'.
* wa_header-key = 'ausw1'.
wa_header-info = text-001.
APPEND wa_header TO header_itab.
CLEAR wa_header.
IF radio1 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton1'.
wa_header-info = text-002.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio2 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton2'.
wa_header-info = text-003.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio3 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton3'.
wa_header-info = text-004.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio4 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton4'.
wa_header-info = text-005.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSE.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton5'.
wa_header-info = text-006.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ENDIF.
wa_header-typ = 'S'.
wa_header-key = 'Benutzer:'.
wa_header-info = sy-uname.
APPEND wa_header TO header_itab.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = header_itab.
ENDFORM.
* FORM alv_füllen *
FORM alv_fuellen .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = my_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
* i_grid_title = my_title
it_fieldcat = feldkatalog_itab
is_layout = gs_layout
* it_events = event_itab
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
* FORM layout_allg_build *
FORM layout_allg_build.
gs_layout-zebra = 'X'.
gs_layout-colwidth_optimize = 'X'.
ENDFORM.
hope someone can help me.
regards tobiashi,
i tried some of your ideas but none helped my.
so here's my complete code
maybe this is helpful.
*& Report z_cd_tool_awdimaiob
REPORT z_cd_tool_awdimaiob.
* G L O B A L I N T E R N A L T A B L E S
DATA: BEGIN OF itab OCCURS 100,
status TYPE dimaiobpar-zstatus,
rtyp TYPE dimaiobpar-zrtyp,
zahlweg TYPE dimaiobpar-ezawe_x,
a_status TYPE i,
a_rtyp TYPE i,
a_partner TYPE i,
a_vertraege TYPE i,
END OF itab .
* G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
wa_test_tab LIKE dimaiobpar,
my_title TYPE lvc_title,
my_repid LIKE sy-repid.
TYPE-POOLS: slis.
DATA: feldkatalog_itab TYPE slis_t_fieldcat_alv,
wa_feldkatalog TYPE slis_fieldcat_alv,
event_itab TYPE slis_t_event,
header_itab TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv,
alv_event TYPE slis_alv_event,
wa_header TYPE slis_listheader.
DATA: t_tab LIKE dimaiobpar.
*selection-screen
SELECTION-SCREEN: SKIP, BEGIN OF BLOCK test WITH FRAME TITLE text-010.
SELECT-OPTIONS: partner FOR t_tab-partner,
astatus FOR t_tab-zstatus.
SELECTION-SCREEN END OF BLOCK test.
*Radiobutton
SELECTION-SCREEN: SKIP, BEGIN OF BLOCK test2 WITH FRAME TITLE text-020.
PARAMETERS: radio1 RADIOBUTTON GROUP test DEFAULT 'X',
radio2 RADIOBUTTON GROUP test,
radio3 RADIOBUTTON GROUP test,
radio4 RADIOBUTTON GROUP test,
radio5 RADIOBUTTON GROUP test.
SELECTION-SCREEN END OF BLOCK test2.
* S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
* Select-Abfrage
PERFORM select_data.
*END-OF-SELECTION.
* Feldkatalog fuellen.
PERFORM feldkatalog_fuellen .
* Feldkatalog übergeben
PERFORM alv_feldkatalog.
* ALV-Event
perform alv_event.
* Layout bestimmen.
PERFORM layout_allg_build.
* header aufbau
PERFORM top_of_page.
SORT itab.
my_title = 'Auswertung Dimaiobpar'.
my_repid = sy-repid.
PERFORM exit_program.
END-OF-SELECTION.
* ALV mit daten füllen
PERFORM alv_fuellen.
* FORM alv_event *
FORM alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = event_itab.
READ TABLE event_itab
WITH KEY name = 'TOP_OF_PAGE'
INTO alv_event.
IF sy-subrc EQ 0.
MOVE 'TOP_OF_PAGE' TO alv_event-form.
APPEND alv_event TO event_itab.
ENDIF.
ENDFORM.
* FORM alv_feldkatalog *
FORM alv_feldkatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = my_repid
i_internal_tabname = 'ITAB'
i_inclname = my_repid
* i_bypassing_buffer = 'X'
CHANGING
ct_fieldcat = feldkatalog_itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
* FORM header *
FORM top_of_page.
CLEAR wa_header.
wa_header-typ = 'H'.
* wa_header-key = 'ausw1'.
wa_header-info = text-001.
APPEND wa_header TO header_itab.
CLEAR wa_header.
IF radio1 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton1'.
wa_header-info = text-002.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio2 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton2'.
wa_header-info = text-003.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio3 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton3'.
wa_header-info = text-004.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSEIF radio4 = 'X'.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton4'.
wa_header-info = text-005.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ELSE.
wa_header-typ = 'S'.
wa_header-key = 'Radiobutton5'.
wa_header-info = text-006.
APPEND wa_header TO header_itab.
CLEAR wa_header.
ENDIF.
wa_header-typ = 'S'.
wa_header-key = 'Benutzer:'.
wa_header-info = sy-uname.
APPEND wa_header TO header_itab.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = header_itab.
REFRESH header_itab.
ENDFORM.
* FORM alv_füllen *
FORM alv_fuellen .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = my_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
* i_grid_title = my_title
it_fieldcat = feldkatalog_itab[]
is_layout = gs_layout
* it_events = event_itab
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
* FORM layout_allg_build *
FORM layout_allg_build.
gs_layout-zebra = 'X'.
gs_layout-colwidth_optimize = 'X'.
ENDFORM.
* FORM feldkatalog_fuellen *
FORM feldkatalog_fuellen.
*Feldkatalog erstellen/füllen mit hilfe der if-schleife anhand des
*gewählten Radiobuttons
IF radio1 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'STATUS'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'RTYP'.
wa_feldkatalog-seltext_m = 'Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'A_RTYP'.
wa_feldkatalog-seltext_m = 'Anzahl Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio2 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'RTYP'.
wa_feldkatalog-seltext_m = 'Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'A_STATUS'.
wa_feldkatalog-seltext_m = 'Anzahl Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio3 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'STATUS'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'RTYP'.
wa_feldkatalog-seltext_m = 'Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'A_VERTRAEGE'.
wa_feldkatalog-seltext_m = 'Anzahl Verträge'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio4 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'STATUS'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'RTYP'.
wa_feldkatalog-seltext_m = 'Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'A_PARTNER'.
wa_feldkatalog-seltext_m = 'Anzahl GPartner'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSE.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'STATUS'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'RTYP'.
wa_feldkatalog-seltext_m = 'Rechungstyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'ZAHLWEG'.
wa_feldkatalog-seltext_m = 'Zahlweg'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'A_PARTNER'.
wa_feldkatalog-seltext_m = 'Anzahl GPartner'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ENDIF.
ENDFORM.
* FORM select_data *
FORM select_data.
*select-abfrage mit hilfe der if-schleife, analog zum Feldkatalog
IF radio1 = 'X'.
* Radiobutton1: Rechungstypen je Satus
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT zrtyp ) AS a_rtyp
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus.
APPEND itab.
ENDSELECT.
ELSEIF radio2 = 'X'.
* Radiobutton2: Status je Rechungstyp.
SELECT
zrtyp AS rtyp
COUNT( DISTINCT zstatus ) AS a_status
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZRTYP
ORDER BY zrtyp.
APPEND itab.
ENDSELECT.
ELSEIF radio3 = 'X'.
* Radiobutton3: Anzahl Verträge je Status und Rtyp.
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT insobject ) AS a_vertraege
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus.
APPEND itab.
ENDSELECT.
ELSEIF radio4 ='X'.
* Radiobutton4: Anzahl GPartner je Status und RTyp.
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT partner ) AS a_partner
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus zrtyp.
APPEND itab.
ENDSELECT.
ELSE.
* Radiobutton5: Anzahl Kunden nach Zahlweg.
SELECT
zstatus AS status
zrtyp AS rtyp
ezawe_x AS zahlweg
COUNT( DISTINCT partner ) AS a_partner
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus AND
ezawe_x IN ('E', 'F', space)
GROUP BY ZSTATUS zrtyp EZAWE_X
ORDER BY zstatus zrtyp.
APPEND itab.
ENDSELECT.
ENDIF.
ENDFORM.
* FORM EXIT_PROGRAM *
FORM exit_program.
IF sy-ucomm = 'BACK' OR
sy-ucomm = 'EXIT' OR
sy-ucomm = 'CANCEL'.
LEAVE PROGRAM.
endif.
ENDFORM. -
hello all,
i've got a little problem with the output of an internal table with the ALV Grid.
i have made the declaration of my internal table (itab) with DATA: Begin of itab... and i have build my own fieldcatalog.
the output of the fieldcatalog is correct but i don't get the results of my itab shown.
it only shows me the numbers of lines in my itab but not the content.
for this im using 'REUSE_ALV_FIELDCATALOG_MERGE' and 'REUSE_ALV_GRID_DISPLAY'
*ALV-Grid
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'itab'
i_structure_name = 'itab'
i_client_never_display
i_inclname = sy-repid
CHANGING
ct_fieldcat = feldkatalog_itab
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*ALV call
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = feldkatalog_itab
i_structure_name = 'itab'
it_events = event_itab
TABLES
t_outtab = itab[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
when i debug my programm the lines of the itab are filled.
thanks and regards
Ayse
REPORT z_test_auswertung.
G L O B A L I N T E R N A L T A B L E S
DATA: BEGIN OF itab OCCURS 100,
status TYPE dimaiobpar-zstatus,
rtyp TYPE dimaiobpar-zrtyp,
zahlweg TYPE dimaiobpar-ezawe_x,
a_status TYPE i,
a_rtyp TYPE i,
a_partner TYPE i,
a_vertraege TYPE i,
END OF itab .
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
wa_test_tab LIKE dimaiobpar,
my_title TYPE lvc_title.
TYPE-POOLS: slis.
DATA: feldkatalog_itab TYPE slis_t_fieldcat_alv,
wa_feldkatalog TYPE slis_fieldcat_alv,
event_itab TYPE slis_t_event,
header_itab TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
DATA:
mycontainer TYPE scrfname VALUE 'BCALV_VARIANTS_0100_C1',
my_grid TYPE REF TO cl_gui_alv_grid,
my_custom_container TYPE REF TO cl_gui_custom_container.
DATA: t_tab LIKE dimaiobpar.
*selection-screen
SELECTION-SCREEN: SKIP, BEGIN OF BLOCK test WITH FRAME TITLE text-010.
SELECT-OPTIONS: partner FOR t_tab-partner,
astatus FOR t_tab-zstatus.
SELECTION-SCREEN END OF BLOCK test.
*Radiobutton
SELECTION-SCREEN: SKIP, BEGIN OF BLOCK test2 WITH FRAME TITLE text-020.
PARAMETERS: radio1 RADIOBUTTON GROUP test DEFAULT 'X',
radio2 RADIOBUTTON GROUP test,
radio3 RADIOBUTTON GROUP test,
radio4 RADIOBUTTON GROUP test,
rafio5 RADIOBUTTON GROUP test.
SELECTION-SCREEN END OF BLOCK test2.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
PERFORM select_data.
CALL SCREEN 100.
DATA ttab LIKE itab.
MOVE itab TO ttab.
Feldkatalog fuellen.
PERFORM feldkatalog_fuellen .
Feldkatalog übergeben
PERFORM alv_feldkatalog.
ALV mit daten füllen
PERFORM alv_füllen.
END-OF-SELECTION.
SORT itab.
my_title = 'Auswertung Dimaiobpar'.
PERFORM exit_program.
FORM alv_feldkatalog *
FORM alv_feldkatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB[]'
i_structure_name = 'TTAB'
i_client_never_display
i_inclname = 'ITAB[]'
i_bypassing_buffer = 'X'
CHANGING
ct_fieldcat = FELDKATALOG_ITAB
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
FORM alv_füllen *
FORM alv_füllen .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_grid_title = my_title
it_fieldcat = FELDKATALOG_ITAB
i_structure_name = 'ITAB'
it_events = event_itab
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM.
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM.
FORM feldkatalog_fuellen *
FORM feldkatalog_fuellen.
IF radio1 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'status'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'rtyp'.
wa_feldkatalog-seltext_m = 'RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'a_rtyp'.
wa_feldkatalog-seltext_m = 'Anzahl RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio2 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'rtyp'.
wa_feldkatalog-seltext_m = 'RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'a_status'.
wa_feldkatalog-seltext_m = 'Anzahl Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio3 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'status'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'rtyp'.
wa_feldkatalog-seltext_m = 'RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'a_vertraege'.
wa_feldkatalog-seltext_m = 'Anzahl Vertraege'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSEIF radio4 = 'X'.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'status'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'rtyp'.
wa_feldkatalog-seltext_m = 'RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'a_gpartner'.
wa_feldkatalog-seltext_m = 'Anzahl GPartner'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ELSE.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'status'.
wa_feldkatalog-seltext_m = 'Status'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'rtyp'.
wa_feldkatalog-seltext_m = 'RTyp'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'zahlweg'.
wa_feldkatalog-seltext_m = 'Zahlweg'.
APPEND wa_feldkatalog TO feldkatalog_itab.
CLEAR wa_feldkatalog.
wa_feldkatalog-fieldname = 'a_gpartner'.
wa_feldkatalog-seltext_m = 'Anzahl GPartner'.
APPEND wa_feldkatalog TO feldkatalog_itab.
ENDIF.
ENDFORM.
FORM select_data *
FORM select_data.
IF radio1 = 'X' .
WRITE / 'Radiobutton1: Rechungstypen je Satus'.
WRITE / 'Status, Rtyp, Anzahl-Rtyp'.
ULINE.
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT zrtyp ) AS a_rtyp
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus.
APPEND itab.
WRITE: / itab.
ENDSELECT.
ELSEIF radio2 = 'X'.
WRITE / 'Radiobutton2: Status je Rechungstyp'.
WRITE /.
SELECT
zrtyp AS rtyp
COUNT( DISTINCT zstatus ) AS a_status
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZRTYP
ORDER BY zrtyp.
APPEND itab.
WRITE: / itab-rtyp, itab-a_status.
ENDSELECT.
ELSEIF radio3 = 'X'.
WRITE / 'Radiobutton3: Anzahl Verträge je Status und Rtyp'.
WRITE /.
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT insobject ) AS a_vertraege
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus.
APPEND itab.
WRITE: / itab-status, itab-rtyp, itab-a_vertraege.
ENDSELECT.
ELSEIF radio4 ='X'.
WRITE: / 'Radiobutton4: Anzahl GPartner je Status und RTyp'.
WRITE: /.
SELECT
zstatus AS status
zrtyp AS rtyp
COUNT( DISTINCT partner ) AS a_partner
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus
GROUP BY ZSTATUS zrtyp
ORDER BY zstatus zrtyp.
APPEND itab.
WRITE: / itab-status, itab-rtyp, itab-a_partner.
ENDSELECT.
ELSE.
WRITE / 'Radiobutton5: Anzahl Kunden nach Zahlweg'.
WRITE /.
SELECT
zstatus AS status
zrtyp AS rtyp
ezawe_x AS zahlweg
COUNT( DISTINCT partner ) AS a_partner
INTO CORRESPONDING FIELDS OF itab
FROM dimaiobpar
WHERE
insobject LIKE 'V%' AND
partner IN partner AND
zstatus IN astatus AND
ezawe_x IN ('E', 'F', space)
GROUP BY ZSTATUS zrtyp EZAWE_X
ORDER BY zstatus zrtyp.
APPEND itab.
WRITE: / itab-status, itab-rtyp, itab-zahlweg, itab-a_partner
ENDSELECT.
ENDIF.
APPEND itab.
ENDFORM=Hi,
Make itab into capital letters as below
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = feldkatalog_itab
i_structure_name = 'ITAB'
* it_events = event_itab
TABLES
t_outtab = itab[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
<b>Reward for helpful answers</b> -
i have problem with subtotals display in AVL
actually my code is
FORM fill_field_catalog_table USING f d t s I.
DATA t_fld TYPE slis_fieldcat_alv.
STATICS pos LIKE sy-index VALUE 0.
pos = pos + 1.
CLEAR t_fld.
MOVE 1 TO t_fld-row_pos.
MOVE pos TO t_fld-col_pos.
MOVE f TO t_fld-fieldname.
MOVE d TO t_fld-seltext_m.
MOVE t TO t_fld-tabname.
MOVE s TO t_fld-do_sum.
MOVE I TO t_fld-NO_OUT.
if not t_fld-NO_OUT is initial. "based on a condition i am appendding the fieldcatlog
APPEND t_fld TO it_fieldcat.
endif.
if i remove "if not t_fld-NO_OUT is initial." this condition and append the fieldcat....
subtotals is getting dispalyed.
if i insert this code subtotals is not getting displayed...
can any body help me out in this fashion...
any input are required please fell free to contact me.
madanHi Madan,
NO_OUT value range is 'SPACE' and 'X'
check if u have gone wrong there
SPACE is not same as INITIAL.
Also go through the following piece of code..
Execute it, u will understand it. At places comments will help u to understand better.
*& Report ZRAJ_SUBTOTAL_ALV
REPORT ZRAJ_SUBTOTAL_ALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
INITIALIZATION.
G_REPID = SY-REPID.
START-OF-SELECTION.
* TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD_CATALOG.
PERFORM ALV_DISPLAY.
*& Form build_catalog
* text
FORM BUILD_CATALOG.
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY = ' '. "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD3'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-DO_SUM = 'X'. "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
* DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
GS_SORT-SUBTOT = 'X'. "This is an important statement
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS = 2.
GS_SORT-UP = 'X'.
*GS_SORT-SUBTOT = 'X'. "Note: This should be commented
APPEND GS_SORT TO GT_SORT.
ENDFORM. "build_catalog
*& Form alv_display
* text
FORM ALV_DISPLAY.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. "alv_display
hope this will solve your problem
Regards Rajan. -
Problem with ALV Filter Option
Hi
In 4.6C version when i click on a column for Filter option, i am able to key only 20 Chars( Visible length is 16 ). Whereas in 4.7 version, i am able to key in 40 Chars in the Input field of the filter option. Is this a problem with 4.6C version. Please Help...Hi
Can you check report BCALV_TEST_FULLSCREEN_FILTER in 46C. When you put a filter on C60 ( 60 Char field ) the screen display of select-option is small but when you select the multiple options, you can key in upto 60 chars and the filter works well. Check if thsi rpogram helps you.
Cheers. -
Hi,
I'm using OO for ALV-GRID. I have problems by using TOP_OF_PAGE.
I try it like this:
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_TOP_OF_PAGE
FOR EVENT TOP_OF_PAGE OF CL_GUI_ALV_GRID,
HANDLE_PRINT_TOP_OF_PAGE
FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*--Handle Print Top of page
METHOD HANDLE_PRINT_TOP_OF_PAGE.
IF SY-PAGNO = 1.
PERFORM PRINT_TOP_OF_PAGE.
ENDIF.
ENDMETHOD. "handle_print_top_of_page
*--Handle Top of page
METHOD HANDLE_TOP_OF_PAGE.
PERFORM TOP_OF_PAGE.
ENDMETHOD. "handle_top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IT_TOOLBAR_EXCLUDING = GT_EXCLUDE
IS_LAYOUT = GS_LAYOUT
CHANGING
IT_FIELDCATALOG = GT_FIELDCAT
IT_OUTTAB = ITAB.
CREATE OBJECT GR_EVENT_HANDLER.
SET HANDLER GR_EVENT_HANDLER->HANDLE_PRINT_TOP_OF_PAGE FOR GR_ALVGRID.
SET HANDLER GR_EVENT_HANDLER->HANDLE_TOP_OF_PAGE FOR GR_ALVGRID.
FORM PRINT_TOP_OF_PAGE.
WRITE: / 'Print-Header'.
ENDFORM. "print_top_of_page
FORM TOP_OF_PAGE.
WRITE: / 'Screnn-Header'.
ENDFORM. "top_of_page
Has anyone an idea what i shell do??
Thanks
regards, DieterHi Vijay,
i have tried this code (same as you but with MARA).
I created PF-Staus STATUS und screen 100 with container CONTROL
but i don't get any result (IT_MARA has 20 entries).
Which mistake have i done?
REPORT ZGRO_TEST1 MESSAGE-ID ZZ .
DATA: IT_MARA TYPE TABLE OF MARA.
DATA: OK_CODE LIKE SY-UCOMM,
SAVE_OK LIKE SY-UCOMM.
DATA: G_CONTAINER TYPE SCRFNAME VALUE 'CONTROL',
O_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
O_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
O_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER,
O_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER,
O_HTML_CNTRL TYPE REF TO CL_GUI_HTML_VIEWER.
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
*Event Handler for Top of page
TOP_OF_PAGE FOR EVENT TOP_OF_PAGE
OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event
PERFORM EVENT_TOP_OF_PAGE USING O_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
START-OF-SELECTION.
SELECT *
FROM MARA
UP TO 20 ROWS
INTO TABLE IT_MARA.
END-OF-SELECTION.
IF NOT IT_MARA[] IS INITIAL.
CALL SCREEN 100.
ELSE.
MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
IF G_CUSTOM_CONTAINER IS INITIAL.
PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
FORM CREATE_AND_INIT_ALV .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
CREATE OBJECT G_CUSTOM_CONTAINER
EXPORTING CONTAINER_NAME = G_CONTAINER.
Create TOP-Document
CREATE OBJECT O_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
Create Splitter for custom_container
CREATE OBJECT O_SPLITTER
EXPORTING PARENT = G_CUSTOM_CONTAINER
ROWS = 2
COLUMNS = 1.
CALL METHOD O_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = O_PARENT_TOP.
CALL METHOD O_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = O_PARENT_GRID.
Set height for g_parent_html
CALL METHOD O_SPLITTER->SET_ROW_HEIGHT
EXPORTING
ID = 1
HEIGHT = 5.
CREATE OBJECT G_GRID
EXPORTING I_PARENT = O_PARENT_GRID.
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
*Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'MARA'
CHANGING
IT_OUTTAB = IT_MARA[].
CALL METHOD O_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events
CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = O_DYNDOC_ID.
ENDFORM. "CREATE_AND_INIT_ALV
FORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C. "Text
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
CALL METHOD DG_DYNDOC_ID->ADD_GAP
EXPORTING
WIDTH = 200.
CALL METHOD O_DYNDOC_ID->ADD_PICTURE
EXPORTING
PICTURE_ID = 'ENJOYSAP_LOGO'.
Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
program ID
DL_TEXT = 'Program Name :'.
CALL METHOD DG_DYNDOC_ID->ADD_GAP.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
CLEAR DL_TEXT.
DL_TEXT = SY-REPID.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_NEGATIVE_INV.
Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
CLEAR : DL_TEXT.
program ID
DL_TEXT = 'User Name :'.
CALL METHOD DG_DYNDOC_ID->ADD_GAP.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
CLEAR DL_TEXT.
DL_TEXT = SY-UNAME.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_NEGATIVE_INV.
Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
Run Date
DL_TEXT = 'Run Date :'.
CALL METHOD DG_DYNDOC_ID->ADD_GAP.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
CLEAR DL_TEXT.
Move date
WRITE SY-DATUM TO DL_TEXT.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_NEGATIVE_INV.
Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
*Time
DL_TEXT = 'Time :'.
CALL METHOD DG_DYNDOC_ID->ADD_GAP.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
CLEAR DL_TEXT.
Move time
WRITE SY-UZEIT TO DL_TEXT.
CALL METHOD O_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = DL_TEXT
SAP_EMPHASIS = CL_DD_AREA=>HEADING
SAP_COLOR = CL_DD_AREA=>LIST_NEGATIVE_INV.
Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
PERFORM DISPLAY.
ENDFORM. " EVENT_TOP_OF_PAGE
FORM DISPLAY.
Creating html control
IF O_HTML_CNTRL IS INITIAL.
CREATE OBJECT O_HTML_CNTRL
EXPORTING
PARENT = O_PARENT_TOP.
ENDIF.
CALL METHOD O_DYNDOC_ID->MERGE_DOCUMENT.
O_DYNDOC_ID->HTML_CONTROL = O_HTML_CNTRL.
Display document
CALL METHOD O_DYNDOC_ID->DISPLAY_DOCUMENT
EXPORTING
REUSE_CONTROL = 'X'
PARENT = O_PARENT_TOP
EXCEPTIONS
HTML_DISPLAY_ERROR = 1.
IF SY-SUBRC NE 0.
MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
ENDIF.
ENDFORM. " display
Regards, Dieter
Maybe you are looking for
-
Error messege stop at the time of mb1c
Hi gurus When am posting the stock into my plant system throwing error messege in the pop up window like stop: Errror accessing function module ; Fmk_Fkrs_Read parameter: Ip_Fikrsip_Fma_Objnr it is coming please help me in this above proble
-
Pictures not being saved to camera roll (or anywhere)
Hi all, I was recently having some issues with sending/receiving data over 3G on my iP4. To try & resolve this, I did a clean restore of my phone. Since then, I have been unable to save any images from the camera (or email, mms etc) to my phone. Init
-
REST web-service invocation gives error ORA-29266: end-of-body reached
We are trying to consume a REST web-service. We send county code and country name to the WS, it then inserts the data and sends us a response in XML. I used this PL/SQL code to invoke the rest WS. http://blog.warp11.nl/2011/07/calling-a-rest-webservi
-
Do headphones need to be plugged in for FM tuner to get signal ?
Hi, I was thinking of using a 6th gen iPod Nano for it's Fm tuner function. However, would like to use a Fiio L10 cable (30-pin to 3.5mm stereo), to get a direct line out analog signal to another amplifier. But this 30pin connector will get in the wa
-
This might be a very easy question: Is there a possibility to find out which kind of object a certain xml-element is? PageItem, Movie, Sound, Graphic, Story, Text, Cell or Table Thanks Huksy