Problems with AMD-K7 boards supporting USB

Hi folks,
I have a broadband connection via a USB modem that keeps cutting out. I have to reboot my computer to get it to connect again. I have all most recent drivers and no hardware conflicts or errors reported.
Calling my ISP tech support they explained that there is a problem with WinXP Professional not properly supporting USB on AMD-K7 boards.
This info was confirmed by usbman.com who write that the best solution is to buy a USB card.
(see http://www.usbman.com/winxpusbguide.htm#AMD%20756)
Can anyone tell me if this is correct and is there another way to get around this?
usbman.com's say in some cases to download some new EIDE drivers from AMD
(see http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_2336~4512,00.html)
but the drivers refuse to install following the instructions from AMD.
I'm desperate - if anyone knows how to get round this problem, please help!!!

oh my gosh! I can't believe! you have to be a kind of magician, your PSU it's the weakest that I ever seen! 5a it's extremely low! I don´t how did it works now, even at the lower speed, please try another PSU ASAP! at least 400 watts, and on the 12v rail at least 18a (at least, I mean minimal).

Similar Messages

HP Pavilion p6-2155a (64bit, running Win8.0)- Problem with AMD Radeon HD7450

Hi,
Have noticed various posts re problems with AMD Radeon HD7450.
For several months, I've had problems with my "video hardware causing Windows to stop working correctly". Until yesterday, this was more of a nuisance than a real problem (so I thought). Yesterday, I had my first BSOD, caused by video_scheduler_internal_error.
Today, I downloaded sp59360.exe & installed, as suggested by the HP website. On checking the Device Manager, this driver appears to be older (Version 8.982.10.0, Date 28.8.12) than the one I had previously (Version 8.982.10.6000, Date 18.9.12).
About 30 minutes ago, while away from my computer, I think I had another "video hardware caused Windows to stop working correctly".
Have I done the right thing in installing sp59360.exe? Should I roll-back to the previous driver? What is causing my problems? Is it possibly a faulty card?

Hello @Mazza52,
I understand that you are getting a BSOD error related to your graphics card and are seeking assistance. As you have tried multiple drivers and are still getting the BSOD I think we should do a backup and recovery of your computer to rule out software as being an issue.
To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If after this you still have the same problem then the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
As for the drivers you installed and had installed the Version 8.982.10.6000 driver from what I can see is for Notebook computers and just happened to work for you the driver Version 8.982.10.0 is the one you should have installed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Any problem with AMD Radeon or FirePro graphic cards?

Hi.
I know that Adobe recommend Nvidia cards for SpeedGrade, but I ask to owners of AMD cards if they have found any problems with AMD cards: bad performance, not realtime with relatively few layers, etc, etc
Which is your experience?
Thanks.

FWIW: I'm using a AMD Radeon HD 6750M (1GB RAM) on my Mac Book Pro. So far it performs fine, in some cases it even feels faster than the Quadro 4000 in my Mac Pro, but I think that has more to do with the type of projects. Mostly doing DSLR on the MBP and R3D on the Mac Pro.

Problems with Vodafone/Huawei E220 wireless usb Modem

Hi there,
My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

No experience, but what happens if you log out then back in?
Does a New User have that problem?

Imac problem with amd radeon 6970m

I live in Kazakhstan where hasn't got any authorized apple services! But my iMac 2011 has problem with amd radeon 6970m. And i need to repair it but i dont know how to do it! Please help me!

В чем проблема?

AMD X6 1090T problems with 790GX-G65 Board

I've been tinkering at this for a week now and I really don't know what to do at this point. I just got the AMD Phenom II X6 1090T and tried it in an MSi 790GX-G65 mainboard. I can't seem to get a clock speed beyond 804Mhz. A PerformanceTest benchmark for this CPU is currently 1856 (when it should be between 6500-7000).
The question I have is this. Is there anything I can do in the BIOS manually to bring the CPU settings to where their supposed to be?
In the BIOS, the CPU ratio is set to auto and the adjusted frequency reads 2300. When I set the multiplier to x16 (adj freq. 3200), there's no difference in either the operating speed or benchmark performance. What can I do? What am I doing wrong?

Thanks for the response, TN
I'm running BIOS v4.0. I hear there's a 4.15, but I haven't been able to install it.
I called MSi Tech support and asked how I could get an update and the person on the phone sent me a beta version. But it's not x64 friendly, it seems. Maybe I did something wrong. But the CPU does work with the board. I just needed to manually set the ratios and voltage levels. I was able to do it with AMD overdrive.

Problems with AMD A8-6410 APU with ATI AMD Radeon R5 Graphics

Hi.
I have problems with the graphics card driver Ati Radeon R5. I have a HP 15 - g012dx , from one moment to another , the driver stopped working. I have to disable this driver for the video work properly. I installed the drivers that brings the HP Recovery Manager:
* AMD HD Graphisc Driver:
-version 13.351.1105.1001
-version 13.351.1105.1005
Prove also unsuccessfully with these drivers :
* amd - catalyst- 14.7 - rc3 -windows- aug12
* amd - catalyst- 15.3beta - 64bit - win8.1 - mar20
* sp67327
* sp69615
PLEASE help me to resolve this problem
thanks
DISABLE DRIVER (VIDEO REGULAR)
ACTIVE DRIVER (VIDEO PROBLEMS)

Install the driver that is available either by download from the HP support portal download section or the HP Recovery manager. You can access the Recovery Manager while logged into Windows or by booting to the usb recovery media you should have created by now.
Try the following HP graphics softpaq version 13.152.1.3000. The HP softpaq will also reinstall the notebook's chipset drivers.
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64482.exeversion
Do not install drivers from AMD.
If you read the fine print at AMD, you will find that AMD cautions you that it is best to use the notebook manufacturer's drivers.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

15-n067sr problems with AMD Radeon HD 8670M (windows 8.1 x64)

Hello,
below i'll explain the problem i'm experiencing.
I've decided to install Windows 8.1 x64 to this notebook model (15-n067sr). The problem is that ATI drivers which i download from HP support site doesn't allow me to install Display driver, it only installs OEM profile or something like that + Installer. No display driver, no CCC, not anything else. And it doesn't matter if i choose quick install or personalized. I've tried deleting all the ATI, Intel and chipset drivers and reinstalling them one by one. First chipset, then Intel and then ATI and still Installer won't let me setup any data which is needed for correct performance.
Anyway, i tried to install 14.9 Catalyst from AMD website, also tried beta drivers and actually they install correctly and i can switch between 2 video GPU's and everything seems fine EXCEPT ONE THING : the notebook won't come back from sleep mode , hybernation mode or when the display switches off. I've tried to manipulate with energy options , but still no result. With AMD display driver installed (from official website) the notebook never resumes correctly from these modes, i guess they just don't work at all, display just becomes black and nothing else happens.
Yes, i've updated my BIOS.
No, with these drivers from HP i can't switch between GPU's and only Intel GPU works actually, i've checked that in TechPower GPU-Z.
I guess i've tried everything possible, but if you can think of any other solution - please let me know, because i can either play games normally and use both GPU's but it's impossible to work with notebook, because sleep and hybernation modes doesn't work, either i can work without any problems, but my AMD GPU isn't avalible.
Thanks in advance.

Hi @Malakhov ,
Thank you for your post, I will do my best to assist you!
I grasp you are having a difficulty with the switchable graphics on your notebook. You have tried uninstalling and reinstalling and using updated drivers but to no success.
Here is a link to the recommended drivers for your system.
HP Pavilion 15-n067sr Notebook PC Drivers
Download and save the Chipset, Intel and AMD drivers and save them on your desktop
Delete all three drivers
Install the Chipset driver
restart your notebook this is an important step
Now install the Intel driver and if prompted restart the notebook and finally install the last driver.
Here is a link to Switchable Graphics on Notebooks Configured with Intel and ATI GPUs.
I hope this helped!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Problem with AMD and Lenovo G510 Notebook

Hello,
I bought a Lenovo G510 Notebook i7 with both Intel and AMD Radeon 8570 graphic cards and I have to say my (first and only) experience with AMD and Lenovo is being so far totally disgusting.
My problem is that there's no way I can make the computer use the AMD Radeon while playing, I updated the drivers (even following instructions from Lenovo Staff in this forum) and there's no way to do it. I updated it from AMD and Intel webpages and neither works. Right now I have the latest drivers from Lenovo webpage and the computer can't even recognize the AMD graphic card (in Device manager is written as OPAL GT/XL 6604).
I don't know what else to try, I've been trying to look for more solutions in the websites but I have to say they are for me totally a mess and the only thing I got was "update your drivers" once and again. I hope the service is better than the offered in the website.
Diego

Can you tell me what Windows version are you using? And some other information.
For example:
G510
i5-4200M
4GB
500GB
Fresh Windows 8.1 Pro Update 1 x64 (means I did not update but installed fresh after formatting all partitions)
Intel HD 4600 & AMD Radeon HD 8570M
Also post a picture of your Device Manager with Display adapters expanded.

PROBLEM with 24/96 bit-rate USB DAC that worked fine until I plugged in two

I'm using a late 2008 15" Macbook Pro that I bought Jan 2009 right before the SD card models came out. Mac OSX 10.6.4 and iTunes 9.2 are installed. I have a Nuforce Icon HDP and a CEntrance DACport 24/96 bit-rate USB DAC (external sound cards) that still work great right now. Note - 16 bit/44 Khz is CD quality, and these 24/96 files are hi-resolution downloads that are closer to SACD or DVD audio.
I have been evaluating a new third 24/96 USB DAC plugged directly into the Macbook USB port (no hub) which has been working fine for over 2 weeks with 24/96 bit-rate lossless music files in iTunes. Audio Midi Setup is set for 24/96 to match the music file's resolution. After making suggestions to the manufacturer they made some improvements and sent me a new version to listen for the differences.
I listened to the new one for a day and it worked fine, but when I plugged in the original test sample into the second USB port at the same time as the new one in order to compare them, the sound became garbled and noisy. This never happened when either one was plugged in by itself. Note, if I make changes to the DAC's bit-rate in Audio Midi Setup I usually close iTunes first and then re-open it when I am done.
Upon hearing this new problem I unplugged both of the new USB DACs and plugged just one of them back in, but now it causes iTunes music playback to pause when one is plugged in and set for 24/96 in audio midi setup. Prior to plugging in both at the same time, either one worked just fine by itself. There is no reason when unplugging one or the other that they shouldn't start working again. But now I can't play any 24/96 music through either one anymore. In quicktime player the songs don't pause like with iTunes, but there is no sound coming through even with just one DAC plugged in at a time. Then I discovered that if I go into Audio Midi Setup application and lower the bit rate to 24/48 then iTunes will resume playing again and I can hear the music fine with iTunes or Quicktime player.
Basically, my Macbook Pro has now lost the ability to play 24/96 bit rate with either of these new USB DACs, when they both worked fine before I plugged them in at the same time. More confusing is that they use the same USB receiver chip as in one of the DACs that I mentioned above in the first paragraph, and both the HDP and DACport still work fine at 24/96 bit-rate. It's only these two new USB DAC that require me to lower the bit rate in Audio Midi Setup to 24/48 in order to listen through them, and this wasn't a problem as recently as yesterday!
The computer is acting like some setting needs to be wiped out - it's DEFINITELY NOT the USB DAC's that are faulty because they still both work fine at 24/96 on my wife's iMac (I'm afraid to try plugging in both at the same time to the iMac in case I screw that Mac up too).
I have reset the PRAM a few times, and this doesn't fix the problem. I thought maybe the com.apple.audiomidisetup.plist file could be corrupted and deleted it, but that didn't help. I don't know what to try next to get the Macbook to start fresh when trying to use these devices, short of having to re-install OSX.
Please, does anyone have a suggestion of how I can make the Macbook forget it ever saw these two USB DACs, and let me start fresh so they start working normally again? I do dozens of reviews for Head-fi.org and I can't afford to have my Macbook Pro compromised like this, which could prevent me from doing some reviews or evaluating new products.

UPDATE:
As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

What is the problem with Adobe Customer/Tech support for Premiere Pro?!?!?!

Today Adobe closed the NINTH support ticket - since mid-January - on my problem with Premiere Pro CC - it crashes on startup (just after the splash screen loads). From what I gather on here, I am not alone with this problem. It's apparently rather common!
I've left message after message and, as I said, NINE tech support tickets (most recent #0185443350). All have been closed or withdrawn without ANY help, reply or solution. Yet my monthly Cloud charge is reliably withdrawn from my bank account!
I need access to a working program! I use this in my studio business and my customers have been waiting since the end of January! This is now costing me money and customers!
Adobe - Apparently you don't particularly care about your customers. I am NOT impressed and, at this point, I'm starting get a little pissed off. It's been almost six months and.....NOTHING!
And YES, all of my drivers are up to date, etc. I've reinstalled. Updated drivers. Etc etc etc, ad nauseum!
NOTHING WORKS!
-Rowen Poole

Hi Rowen,
I sent you a PM. I hope I can help you resolve this issue.
Thanks,
Kevin

I have tried to restore from iCloud back on 4 different dates and each time I get the message can't retore problem with data. Apple support said they can't help ... Anyone got an idea what I can do . Very disappointed !

How disappointing I can't not restore my phone from any iCloud backups. Each time it advises that there is a problem with my data. Spoke direct with apple support and said there is nothing I can do !
Any help / insight

How disappointing I can't not restore my phone from any iCloud backups. Each time it advises that there is a problem with my data. Spoke direct with apple support and said there is nothing I can do !
Any help / insight

Problems with AMD mobility radeon hd 2600 in Satellite A210-103

I've got a problem with my graphic card. The computer doesn't find any graphic card. I played on Windows Vista again a few weeks ago, and now the graphic card disappeared.
I allready downloaded new display drivers, but nothings working.
Can anyone help me with my problem?

Hi
Please check the driver from other notebook models which are released with the same GPU.
I found these notebook models which support the same graphic chip:
Satellite A200 PSAE6E
Satellite P200 PSPB6E
Satellite Pro A200 PSAE7E
Satellite Pro P200 PSPB7E
Greets

Problem with email clients- BT support clueless

Hi. I've been having a bizarre problem since migrating to the new BT mail. About 2 weeks after the migration, all of 3 of my email clients (thunderbird on a Mac decktop, outlook on a PC laptop, iPhone) started reporting the "server does not recognsise username/password" error. I followed through the online BT mail help instructions to make sure all of the email account settings were correct, which didn't help. I can access BT webmail directly with my username/password and via that changed my password, then updated it on my email clients. Initial joy! It worked and my clients could access my email accounts again. 24 hours later- same problem with all of my clients- server does not recognise username/password. The only way I can get them to work again is to repeat the process of changing my password via webmail, then updating the password on my email clients. This allows access for about a day, after which I get the same username/password error.
Eventually after about a month of this I decided to phone BT support. What a painful process. The guy on the other end of the line did his best, but unfortunately his English wasn't great. It took about 50 minutes of circular conversations for me to explain the problem. Eventually his anwer was that because the webmail was working properly, the problem must be with the email clients, which he couldn't help with. He advised me to take my laptop/iPhone/ to a local engineer to figure out what the problem must be. By this time I was really frustrated and asked to speak with the supervisor. He agreed that a) because the problem was with all three clients, and b) because changing the password on webmail and updating them then allowed them to work, albeit temporarily, that it was highly unlikely that the problem was with the client setup. However, he said that he wasn't able to help any further as my webmail is working properly!
Can anyone help. Has anyone else had this problem? Any ideas? How do I get BT to fix this and who do I complain to if they can't?
BT- outsourcing support abroad seems like a good idea. It isn't worth the loss of goodwill. Bring it back.

EvanR wrote:
Thanks for the advice, but I'm afraid this makes no difference at all to the problem.
After posting, the problem sorted itself out for a few weeks, it's back again today. Reading all of the other posts about the disaster which is the new bt mail system, I've decided just to leave it for a few days. It's obviously something at BT's side (although the support try to deny it). By the way, the support is totally useless. Promises to call back not kept, technically clueless etc.
If this keeps up I'm just going to go to gmail or some other email provider.
To clarify the situation can you please do the following concentrating on your PC Laptop.
1. Wait until you get the failure on Outlook.
2. Switch off (ie power down) your Mac desktop and Iphone.
3. Try Outlook again.
4. If the problem still occurs then login to webmail and logout WITHOUT changing your password.
5. Try Outlook again.
6. After 5. you can power up your Mac and Iphone
Please report back confirming you have done 2. and the results of step 3 and 5 including any failure messages reported exactly with any personal information xxxx out and not deleted.
Are you using POP or IMAP in your clients ?

Problems with AMD-K7 boards supporting USB

Similar Messages

Maybe you are looking for