Problems with an unresponsive lock screen
Out of no where my phone started showing problems with the touch screen first it was small then throughout the day it became worse. Now I can't even access my phone unless I use siri. It is stuck at the lock screen because the calibration seems to be off and even when I get siri to open my phone I have problems accessing things because the screen is either unresponsive or is responding in the wrong section. Help please
If the iPhone still has Warranty or AppleCare, take to Apple for resolution. If no coverage, make sure the Digitizer flex cable is perfectly attached to the logic board. If it is and still problem, the next step would be replacement of the front screen assembly, which includes digitizer, front glass, lcd display and mounting frame, all a single part. Apple handles this with replacement iPhone 4S for $199.
Similar Messages
-
Problem with swiping past lock screen can't swipe
The screen still moves but does not respond to swiping or anything even when I normally turn it off I can't swipe and when I force reset it does not help I need my iPhone 5 to work at school I need help ASAP
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414 -
Unresponsive lock screen while charging
Has anyone had an issue with a unresponsive lock screen while charging? As soon as I unplug the lightening connector and the unlock screen changes to my lockscreen wallpaper it responds?
Welcome to Apple Support Communities
As far as I know, iPads don't show the battery icon while it's being charged. It just only shows for a few seconds when you plug it to the charger, but then it disappears and you can only see your battery icon at the top right of the screen -
I have problems with office for mac screen resolution, specially with excel
I have problems with office for mac screen resolution, specially with excel ?
For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right? -
We have an ipad 3 with an unresponsive touch screen
We have an ipad 3 with an unresponsive touch screen, any suggestions?
If the above doesn't work, try this:
1. Connect your iPad to iTunes (computer)
2. In iTunes, select your device.
3.From the Summary pane, click "Configure Universal Access" in the Options section at the bottom.
4. Select "Neither" and click OK. -
Problem with l355 s7817 Blue Screens and will not boot up
Hello, I am new to this forum so excuse my forum etiquitte. I have a l355 S7817 for 2 yrs and I have had to do a system restore on this laptop twice. I am a Vista SP2 user that has been getting blue screens recently when trying to boot up. I have gone and cleared cache, temp files, temp internet files and removed new software that was loaded and I am still getting the BSOD. I can come up in safe mode, sometimes with networking but when I go to copy data to my external HDD so I can do a system restore again, I get the BSOD. I have tried to restore from a chk point and still get errors. I need to gather my data off the drive so I can do a restore but I cannot get my data due to it fails in the middle of the copy. Any ideas what could be causing this.
I had no problem with my laptop all last week but come Monday, It started doing this. I get a message in Safe mode saying Windows has recovered from an unexpected shutdown. Windows can check for a online solution to the problem. It finds nothing and in the problem details it says
Problem event name Blue screen
OS version 6.0.6002.2.0768.3
Locale ID 1033
Additional Info on problem
BCCode 19
BCP1 00000020
BCP2 9E384BD0
BCP3 9E384C98
Any help would be appreciated.....
ThanksBug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
SYMEFA.SYS is a Symantec driver. If you have any Symantec/Norton products, I suggest you remove them. It's necessary to tear them out by the roots using their tool
Download and run the Norton Removal Tool to uninstall your Norton product
Microsoft's AV works just fine.
Security Essentials.
==================================================
Dump File : Mini081910-20.dmp
Crash Time : 8/19/2010 1:46:17 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : 0xbff59c01
Parameter 2 : 0x00000000
Parameter 3 : 0x837505ba
Parameter 4 : 0x00000000
Caused By Driver : SYMEFA.SYS
Caused By Address : SYMEFA.SYS+103b
File Description :
Product Name :
Company :
File Version :
Processor : 32-bit
Computer Name :
Full Path : C:\Test\Mini081910-20.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6002
==================================================
-Jerry -
Problem with image quality on screen in PS CS5
I just installed PhotoShop CS5 and opened up some images to edit. The first image I opened came up as completely black. I tried zooming in and out, but the display still looked all black. I opened up another image and I could see the image clearly if I was at 25%, 50% or 100%. If I was on any other zoom size I would get a very bad looking image like it had a very coarse screen over it. I opened another image that had the ugly screen patterns no matter what zoom size I was using. Does this have to do with any setting default? Do I have a problem with file conversions? We have one person in our design group that can run in 64bit mode. I am running in 32 bit mode. One of the images I opened was one that he edited in 64 bit mode.
Help this is frustrating. Any ideas on what to do?Thanks,
I tried turning off OpenGL and that didn't help.
Are you talking about looking for a new video driver from the Manufacturer of the video card I am using? If so do I just look for the newest driver, or should I be looking for something else.
Also, here are my computer stats:
Windows Vista Business
2 GB RAM
About 8 GB available out of 62 GB
Video card: ATI Mobility Radeon X1400 -
Does anyone have a problem with the ipad air screen?
I bought an ipad air last week and the left edge of the screen was darker than the other side. It was obvious so I just returned it and bought a new one since the store didn't have the same style in storage. I bought another one from another retailer, and just found the same problem, but not as serious as the former one. So I just took it back to the store the next day and exchange another one. Unfortunately, the third one had the same problem at the up-left corner of the screen. I admit that I am picky, but I think I pay this amount of money so I deserve perfect screen. If the brightness of the two sides is different, I dont think it is a product of good quality.
Just want know if anyone else have the same problem with me. Or you just can bear the small diffrence of display. BTW, in China, it is reported spreadly that the ipad air screen has a problem. They even generalize the serial number for problematic ipad air.Yep. Many quality control problems. The new mini has fewer issues. No problems with older models.
Steve Jobs, where are you when we need you! -
Problem with the default selection screen condition
hi guys,
I have got some problem with the default screen given by the PNP logical database, P0000 infotype automatically populated according to the condition given in default screen.
Reg,
HariharanDon know what u r trying to acheive.
1) when u have specified PNP in the logical databse field of attributes of program, the SAP wil proivde u default PNP screen and here u can also add ur paramters if u want.
2) in the program u have to declare like
INFOTYPES: 0000,0001. "Etc
for all the infotypes u want to use in the program.
3) it is the GET PERNR event which wil fil all the p0000 and p0001 (internal tables for al the infotypes declared via INFOTYPES syntax as shown above)
4) after tht get pernr, u now have data in P tables and u can use it for further reporting.
5) refer below dummy code -
REPORT ZPPL_PREVEMPLOYERS message-id rp
line-size 250
line-count 65.
*Program logic :- This Report is used to Download all the Previous
* Employer (IT0023) records of the employees
*eject
*& Tables and Infotypes *
tables: pernr.
infotypes: 0000,
0001,
0002,
0023.
*eject
*& Constants *
constants: c_1(1) type c value '1' ,
c_3(1) type c value '3' ,
c_i(1) type c value 'I' ,
c_x(1) type c value 'X' ,
c_eq(2) type c value 'EQ' ,
c_pl03 like p0001-werks value 'PL03'.
*eject
*& Selection-Screen *
parameters: p_file like rlgrap-filename default 'C:TempABC.xls',
p_test as checkbox default c_x .
*eject
*& Internal tables *
* Internal Table for Output
data: begin of t_output occurs 0 ,
pernr like pernr-pernr ,
nachn like p0002-nachn ,
vorna like p0002-vorna ,
orgeh_stext like p1000-stext ,
plans_stext like p1000-stext ,
begda like p0023-begda ,
endda like p0023-endda ,
land1 like p0023-land1 ,
arbgb like p0023-arbgb ,
ort01 like p0023-ort01 .
data: end of t_output .
*eject
*& Variables *
data: o_stext like p1000-stext,
p_stext like p1000-stext.
*eject
*& Initialization *
Initialization.
* Initialize Selection-Screen values
perform init_selction_screen.
*eject
*& AT Selection-screen *
at selection-screen .
* Check if Test run selected, download file name should be entered
if p_test is initial. "
if p_file is initial.
message e016 with 'Please enter file name'
'specifying complete path'.
endif.
endif.
*eject
*& Start-of Selection *
Start-of-selection.
get pernr.
clear t_output.
* Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Check if employee is active
check p0000-stat2 in pnpstat2. "pernr Active
* Read Infotype 1
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* check if employee belongs to PL03
check p0001-werks in pnpwerks. "belongs to PL03
* Check if emp belongs to Active Group
check p0001-persg in pnppersg.
* Read Infotype 2
rp-provide-from-last p0002 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Read Org Unit Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'O'
objid = p0001-orgeh
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = o_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
*Read Position Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'S'
objid = p0001-plans
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = p_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
* Gather all the required information related to the emp
move: pernr-pernr to t_output-pernr,
o_stext to t_output-orgeh_stext,
p_stext to t_output-plans_stext,
p0002-nachn to t_output-nachn,
p0002-vorna to t_output-vorna.
* Gather previous Employee details
loop at p0023.
move-corresponding p0023 to t_output.
append t_output.
endloop.
*eject
*& End-of Selection *
end-of-selection.
perform print_report.
* Downlaod the file
if not t_output[] is initial.
if p_test eq space.
perform download_file.
endif.
else.
write: 'No records selected' color col_negative.
endif.
*eject
*& Top-of-page *
Top-of-page.
* Print Header
perform print_header.
*eject
*& Form download_file
* Description :
FORM download_file .
DATA: full_file_name TYPE string,
z_akt_filesize TYPE i .
full_file_name = p_file.
* download table into file on presentation server
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = full_file_name
filetype = 'DAT'
NO_AUTH_CHECK = c_x
codepage = '1160'
IMPORTING
FILELENGTH = z_akt_filesize
CHANGING
data_tab = t_output[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
IF sy-subrc NE 0.
MESSAGE e016 WITH 'Download-Error; RC:' sy-subrc.
ENDIF.
ENDFORM. " download_file
*eject
*& Form print_report
*Description:
FORM print_report .
data: i type i,
w_count type i.
sort t_output.
* Print the report
loop at t_output.
i = sy-tabix mod 2.
if i eq 0.
format color col_normal intensified on.
else.
format color col_normal intensified off.
endif.
write:/1 t_output-pernr ,
10 t_output-vorna(25) ,
35 t_output-nachn(25) ,
61 t_output-orgeh_stext ,
102 t_output-plans_stext ,
143 t_output-begda ,
154 t_output-endda ,
168 t_output-land1 ,
178 t_output-arbgb(40) ,
219 t_output-ort01 ,
249 space .
endloop.
uline.
Describe table t_output lines w_count.
Skip 2.
Write:/ 'Total No of Records Downloaded: ' color col_total,
w_count.
ENDFORM. " print_report
*eject
*& Form print_header
*Description:
FORM print_header .
skip 1.
Uline.
format Intensified on color col_heading.
write:/1 'Pers. #' ,
10 'Last Name' ,
35 'First Name' ,
61 'Org Unit' ,
102 'Position' ,
143 'Beg Date' ,
154 'End Date' ,
168 'Cntry Key' ,
178 'Prev Employer' ,
219 'City' ,
249 space .
format intensified off color off.
uline.
ENDFORM. " print_header
*eject
*& Form init_selction_screen
*Description:
FORM init_selction_screen .
refresh: pnpwerks,
pnppersg,
pnpstat2.
clear: pnpwerks,
pnppersg,
pnpstat2.
pnpwerks-sign = c_i.
pnpwerks-option = c_EQ.
pnpwerks-low = c_pl03.
append pnpwerks.
pnppersg-sign = c_i.
pnppersg-option = c_EQ.
pnppersg-low = c_1.
append pnppersg.
pnpstat2-sign = c_i.
pnpstat2-option = c_EQ.
pnpstat2-low = c_3.
append pnpstat2.
ENDFORM. " init_selction_screen -
Problem with reading data from screen and inserting in table
hi ther,
im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
i done screen gui , table creation but problems with action. what the content of acton add.
is ther any link that helps me or tut??
thankx in advance!
regardsHi,
Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
Now in the action of ADD button....
--> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
for example if the node is contains aone attribute like MATNR
reading the node from wizard will generate the code as....
DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
DATA lo_el_matnr TYPE REF TO if_wd_context_element.
DATA ls_matnr TYPE wd_this->element_matnr.
DATA lv_matnr TYPE wd_this->element_matnr-matnr.
* navigate from <CONTEXT> to <MATNR> via lead selection
lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
* @TODO handle non existant child
* IF lo_nd_matnr IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_matnr = lo_nd_matnr->get_element( ).
* @TODO handle not set lead selection
IF lo_el_matnr IS INITIAL.
ENDIF.
* get single attribute
lo_el_matnr->get_attribute(
EXPORTING
name = `MATNR`
IMPORTING
value = lv_matnr ).
here the variable lv_matnr will contain the entered value......
now you can use this value for further process.
Thanks,
Shailaja Ainala. -
Shuffle video with music on lock screen
My issue is the reverse of the issue here - Videos playing during song shuffle
On my old iPhones 3GS and iPhone 5, I would listen to a shuffle on my phone while locked. This also successfully played the audio from any music videos I had (no visual as the screen was locked of course).
This was perfectly fine by me and I rather appreciated it.
However, my new iPhone 6 isn't doing the same. It still puts videos into the shuffle list but will not play them. Typically, it just skips that track and moves onto the next one.
When I unlock my phone and play the shuffle in an opened music app, it gets even worse as it just seems to stall on playing the video until I manually skip forward to the next track.
I'm currently running iOS 8.1.3 and the phone was only purchased last December. All versions of the iOS since I got the phone have had this problem. As my iPhone 5 had the same iOS version at the time I upgraded (but didn't have this issue), I'm willing to bet I either lost a setting somewhere in the transfer or it's exclusively an iPhone 6 problem.
If someone could even just help me to get the audio from the videos playing on the lock screen again, I'd appreciate it.
ThanksHi Foudyr,
Welcome to the Support Communities!
Restarting and/or resetting the iPhone is a good first troubleshooting step for this scenario.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If you have tried those two things, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Cheers,
- Judy -
Hardware problem with an international locked iphone 4
I have a locked iphone 4 from Venezuela and it has a problem with the mic, it is in guarranty and I'm in USA
Make a Genius Bar appointment at your nearest Apple Store, it may not be a hardware problem. If it is a hardware problem you will have to wait until you return to Venezuela.
-
Weird problem with my iPhone 4 screen
Hi Guys,
I can't seem to wipe away smudges on my iPhone screen no matter what I use. My old 3GS was easy, use a cloth or damp one and done. Problem with the my iPhone 4 is it just smudges more and more even when using water, different types of cloths and so forth. It's starting to bug me now cause in the sun light it looks terrible. Before anyone says wash my hands, I always do
Anyways else have this problem or a solution?
Thanks
GI have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update. -
Problem with transporting the enhancement screen.
Hi,
I have transported an enhancement project. The enhancement screen doesnt show up,instead it goes for a dump. How can i resolve this.
Regards,
Sathish.yeah u can change the package.
check SE80 or se03 here u can change.
<b>[code]IN SE80--->select PACKAGE option in the first LIST BOX
and in the second list box give ur Local PACKAGE like $TMP, then u will get list of OBJECTS in that LOCAL PACKAGE.
2.Select object which PACKAGE u want to change.
3.Right click on that Object ,there u will get option like CHANGE PACKAGE.[/code]</b>
[code]Do one thing, GOTO -->SE51 with program name and Screen --->GOTO(menu item) ->Object Dic.Entry> here u can assign new PACKAGE.[/code]
Regards
Prabhu -
Problems with Distortion in 30" Screen and new MacBook Pro 2.6 MHz
I've got problems with distortion and shadows with this MacBook Pro model (the new 2.6 MHz Intel Core 2 Duo w/ 4 GB 667 MHz DDR2 SDRAM memory) on my Apple 30". The older MacBook Pro(s) work and look fine on this monitor (Apple 30"). Just bought the new machine last week and the monitor is about 1-1/2 years old. This one has the 200 GB Hitachi drive.
Any ideas where the distortion is coming from? This machine has the 8600M GT w/ 512 MB Ram. Looks great until you plug into the Apple 30". Lower resolution does not help.What does the distortion look like? Pictures would be helpful.
Is it similar to this: http://discussions.apple.com/thread.jspa?threadID=1440820&tstart=15
Maybe you are looking for
-
hello, i am using ADF JSF technology.in my JSF page , i have a button. when button pressed, i need to call a stored procedure. How to write this in my backing bean that responce to the Event. and also how to pass the parameters from my JSF page( valu
-
i couldn't update 10.8.1 to 10.8.2. The AppStore.app couldn't find the updates about Mo...Lion. Just iPhoto, and iPhoto couldn't update too, because it depends on osx 10.8.2!!!
-
Is there any report to get the header/item text at GR stage together?
Hi gurus, Is there any report to get the header/item text at GR stage together with a date range? at the point of goods receipt? Or a report that could be run to search for header/item text at GR stage together with a date range? Text that was enter
-
I embedded a pdf in an Outlook appointment on my desktop. The appointment synced with my iPad calendar correctly but the pdf did not come through. Did I miss a setting on my iPad? Thank you
-
Java error importing class on report
Hi friends: I build a java program to save blob files into oracle database table. The program compile and execute fine in JDeveloper 10g. I get the class file and put in temporal directory and now I am trying to import these class file with Reports B