Problems with animation playback consistency and transparencies in DPS

Hello,
I'm somewhat new to Edge Animate and I'm trying to incorporate simple animation into a DPS piece that my company has been publishing for the past year. A few questions:
1) Is there a "trick" to getting transparencies to work? I've had zero luck so far and I'm beginning to resign myself to just putting the entire design into the Edge composition as a work around. There must be an easier way? I'm hoping I'm missing something simple and obvious. From my research, I've gleaned that the poster image feature is a major player in all the headaches. Speaking of which, do you have to start over and rebuild a comp everytime you need to publish without a poster?
2) I've noticed that playback is really inconsistant. Most of the time, when I first swipe on a page, the animation won't play at all. Subsequent swipes, and it begins playing fairly consistency. Any ideas as to what this is about?
3) Finally, is there any guidelines for SVG settings used in Edge? I found that many of the vector files I was using in comps were messing w/playback, so I ended up subbing them out for pngs.
Thanks!
Darin

Hey Darin,
There's currently a bug where the poster image won't clear when your AN comp plays inside of DPS. So for example, if your stage is set to transparent and you have a blue poster image, the blue poster still shows while the stage is playing.
1) A workaround for this (if you don't need a poster image) is to swap out the poster file in your publish settings for a 1x1px transparent png graphic. This makes it so even though the poster doesn't technically clear, it's only showing that 1x1px png.
2) Try setting the auto play delay to something like .125sec in under Web Content in the Folio Overlay panel inside of InDesign. I believe there was an issue where content can sometimes have tricky playback, give that a shot and see if it helps.
3) Not sure what the issues you're facing are, but where are you testing your playback? The desktop DPS viewer has an outdated version of webkit and won't render SVG properly (if at all).
hth,
Sarah

Similar Messages

Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

bump

Problem with animated .gif

I have a problem with animated gifs. So if I set a animated gif as background and a button is over it as in the example below, then everytime the animation goes on the button disappears until I go over it with the mouse. So what can I do to solve this?
import java.awt.Color;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
public class FrameBackImage {
          public static void main(String args []){
               final JFrame frame = new JFrame("Frame");
               frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               frame.setSize(400, 400);
               frame.setResizable(false);
               frame.setLayout(null);
               java.net.URL imageURL = ImageApp.class.getResource("animatedw.gif");
               ImageIcon imageIcon = new ImageIcon(imageURL);
             final JLabel label = new JLabel(imageIcon);
             label.setBounds(0,0 , 400, 400);
             frame.getLayeredPane().add(label);
             JButton button = new JButton ("Exit");
             button.setBounds(200, 129, 60, 60);
             button.setBackground(Color.black);
             button.setForeground(Color.white);
             frame.add(button);
             button.addActionListener(
             new ActionListener(){
                    public void actionPerformed(ActionEvent arg0) {
                         System.exit(0);
             frame.validate();
              frame.setVisible(true);
}

In the future, Swing related questions should be posted in the Swing forum.
Your usage of the getLayeredPane() method is something I've never seen before, so I don't know if thats the problem or not.
How to display a "background image" is asked all the time in the Swing forum. So to familiarize yourself with the forum you can try searching the Swing forum. Using the keywords I highlighted would be a good place to start.

Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard. Has anyone seen this?

We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,

Motion 4.0.3
It just doesn't seem to recognize the alpha at all.

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it. Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with animation playback consistency and transparencies in DPS

Similar Messages

Maybe you are looking for