Problems with Apache Plugin and IE
Hi,
we are currently migrating from NES 3.6 to Apache 1.3.27. Since we use Apache 1.3.27 we encountered frequent crashes (Dr. Watsons) in IE 5.0. We can avoid this using an updated jsproxy.dll (of IE5.5 SP2 or later). However we cannot force our customers to use IE 5.5 SP2 or later.
As we didn't have this problem using NES 3.6 there must be a server side correction for this problem.
Any ideas? Please contact me via email: [email protected]
Thanks for your help.
Regards
Andi
Thank you very much BIJ001!! It works!!
However i don't understand the reason you've given me. You've said:
"The last time I programmed a servlet (as opposed to, say, a JSP) I programmed it in Java, thus no "linea" like your example was possible there."
Why not? I use the "response.getWriter()" method to get a printWriter and then i create the html code for the servlet.
Anyway, thanks again because i would never have solved it without your help.
Regards,
Aitor
Similar Messages
-
Hi,
Hi I am getting some Errors when i am trying to Run the Apache Server. Actual Problem is
I want to create an Cluster Environment using 2 weblogic Cluster. i read that documentation, using apache-weblogic plug-in, we can improve the cluster performence.
I follow the Same rules and i install ed the Apache server and i copy the *.so file that required for apache(if i commented out the LoadModule weblogic_module libexec/mod_wl.so , serverrunning fine)
But whenever i am trying to run apache Server with that
Its given a error like
"BUG IN DYNAMIC LINKER ld.so:dynamic-link.h:57: elf_get_dynamic_info: Assertion '! "bad dynamic tag" failed!
./apachectl start: httpd could not be started
If u will give some help about this its most helpful for me.
ThankQ
Krishna Botla
Which version of Apache are you using? Are you on Solaris?
Have you enabled the bootstap module mod_so for apache? Do httpd -l to ensure that.
Did you use apxs to deploy mod_wl.so?
Please go through the steps described in the docs again to see if you missed something.
--Vinod.
KrishnaKumar wrote:
> Hi,
> Hi I am getting some Errors when i am trying to Run the Apache Server. Actual Problem is
> I want to create an Cluster Environment using 2 weblogic Cluster. i read that documentation, using apache-weblogic plug-in, we can improve the cluster performence.
> I follow the Same rules and i install ed the Apache server and i copy the *.so file that required for apache(if i commented out the LoadModule weblogic_module libexec/mod_wl.so , serverrunning fine)
> But whenever i am trying to run apache Server with that
> Its given a error like
> "BUG IN DYNAMIC LINKER ld.so:dynamic-link.h:57: elf_get_dynamic_info: Assertion '! "bad dynamic tag" failed!
> /apachectl start: httpd could not be started
>
> If u will give some help about this its most helpful for me.
>
> ThankQ
> Krishna Botla
-
JMX with apache plugin and weblogic
Hy every body
I use weblogic 9.1, throw apache plugin
I try to get mbean with JMX,
i have this error on the log of the server when I try to acces to a server by passing apache url into jmxConnector:
java.lang.AssertionError: Assertion violated
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.iiop.MuxableSocketIIOP.getMessageLength(MuxableSocketIIOP.java:315)
at weblogic.socket.AbstractMuxableSocket.isMessageComplete(AbstractMuxableSocket.java:336)
at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:166)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
the log:
================New Request: [GIOP] =================
Tue May 31 14:25:36 2011 <35921306844736112> INFO: SSL is not configured
Tue May 31 14:25:36 2011 <35921306844736112> Using Uri /
Tue May 31 14:25:36 2011 <35921306844736112> After trimming path: '/'
Tue May 31 14:25:36 2011 <35921306844736112> The final request string is '/'
Tue May 31 14:25:36 2011 <35921306844736112> SEARCHING id=[192.168.2.83:7001] from current ID=[192.168.2.83:7001]
Tue May 31 14:25:36 2011 <35921306844736112> The two ids matched
Tue May 31 14:25:36 2011 <35921306844736112> @@@FOUND...id=[192.168.2.83:7001], server_name=[AdminServer], server_port=[80]
Tue May 31 14:25:36 2011 <35921306844736112> attempt #0 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> Trying a pooled connection for '192.168.2.83/7001/7001'
Tue May 31 14:25:36 2011 <35921306844736112> getPooledConn: No more connections in the pool for Host[192.168.2.83] Port[7001] SecurePort[7001]
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2039
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2039
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2039, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #1 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2040
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2040
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2040, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #2 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2041
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2041
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2041, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #3 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2042
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2042
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2042, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #4 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2043
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2043
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2043, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> attempt #5 out of a max of 5
Tue May 31 14:25:36 2011 <35921306844736112> general list: trying connect to '192.168.2.83'/7001/7001 at line 2724 for '/'
Tue May 31 14:25:36 2011 <35921306844736112> INFO: New NON-SSL URL
Tue May 31 14:25:36 2011 <35921306844736112> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Tue May 31 14:25:36 2011 <35921306844736112> EINPROGRESS in connect() - selecting
Tue May 31 14:25:36 2011 <35921306844736112> Local Port of the socket is 2044
Tue May 31 14:25:36 2011 <35921306844736112> Remote Host 192.168.2.83 Remote Port 7001
Tue May 31 14:25:36 2011 <35921306844736112> general list: created a new connection to '192.168.2.83'/7001 for '/', Local port:2044
Tue May 31 14:25:36 2011 <35921306844736112> URL::sendHeaders(): meth='GIOP' file='/' protocol='HTTP/0.9'
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Connection]=[Keep-Alive]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[WL-Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[Proxy-Client-IP]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-Forwarded-For]=[192.168.0.143]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[24]
Tue May 31 14:25:36 2011 <35921306844736112> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Local port of the socket 2044, connected to Remote Host/Port 192.168.2.83/7001
Tue May 31 14:25:36 2011 <35921306844736112> readStatus: Response contains no data - isRecycled: 0
Tue May 31 14:25:36 2011 <35921306844736112> *******Exception type [READ_ERROR_FROM_SERVER] (Unexpected EOF reading HTTP status - failover request based on Idempotent flag) raised at line 841 of ../nsapi/URL.cpp
Tue May 31 14:25:36 2011 <35921306844736112> Marking 192.168.2.83:7001 as bad
Tue May 31 14:25:36 2011 <35921306844736112> got exception in sendRequest phase: READ_ERROR_FROM_SERVER [os error=0, line 841 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - failover request based on Idempotent flag at line 3160
Tue May 31 14:25:36 2011 <35921306844736112> Failing over after sendRequest() exception: READ_ERROR_FROM_SERVER as Idempotent is set to ON
Tue May 31 14:25:36 2011 <35921306844736112> request [] did NOT process successfully..................
the httpd.conf:
<IfModule mod_weblogic.c>
WebLogicHost 192.168.2.83
WebLogicPort 7001
#WebLogicCluster t3://192.168.2.83:7003, t3://192.168.2.83: 7005, t3://192.168.2.83:7013
Idempotent on
Debug HFC,HTW,HFW
WLLogFile c:/wlproxy.log
WLTempDir c:/TEMP
DebugConfigInfo On
KeepAliveEnabled ON
KeepAliveSecs 14
MatchExpression *
</IfModule>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
I don't use ssl.
I can access to the jsp of the server with the url of apach , but i cannot use jmx throught apache. I can use jmx with the server if I don't use apache, but i need apache for the next step of the project.
please, help me !I think the plug-in is intended for serves static pages, and another part of the document like MIME types.
I assume you are using the http protocol in your client to establish a jmx connection. Try enabling HTTP tunneling in weblogic server.
Can you post the code used to establish connetion? -
6.1 SP 2 certificate authenticator fails with Apache plugin and SSL
Hi,
Does anybody have a certificate authenticator working in WebLogic 6.1
SP 2, in combination with the Apache HTTP Server plugin and SSL?
We implemented a certificate authenticator that works correctly in
WebLogic 6.1 SP 2 when we configure SSL with "Client Certificate
Required", and access it directly from a browser (the browser hits the
SSL port of the WebLogic server, like 7002).
This certificate authenticator also works correctly with a proxy web
server. We set up a Stronghold server (web server based on Apache) on
Linux with the Apache HTTP Server plugin from BEA, configured the
plugin to use SSL, and configured our WebLogic 6.1 SP 1 server without
"Client Certificate Required". The certificate authenticator gets the
end user's certificate correctly.
This same architecture with the proxy web server does not work when we
upgrade the WebLogic Server to SP 2. WebLogic Server logs the
"incorrect or missing client cert" error, our certificate
authenticator is never called, and the browser gets a 401 Unauthorized
error.
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). So it appears to us that the plugin encodes the
certificate in the request header in such a way that a SP 1 server can
extract it, but an SP 2 server cannot. We were wondering whether
there might be changes to the plugin to stay in step with the SP 2
server that never got ported to Linux, or whether an updated Linux
plugin never got included in the installer packages.
So: has anybody gotten a system like
Apache/Stronghold + WebLogic Plugin <-- SSL --> WebLogic 6.1 SP 2 +
Cert Auth
to work?
Thanks in advance for any help,
Jim Doyle
[email protected]A correction, I think:
Now that I rolled back a system to 6.1 SP 1, it looks like 6.1 SP 1
does include a different mod_wl_ssl.so from that in SP 2. I believe I
was comparing the wrong file. In fact, trying to compare versions of
the mod_wl_ssl.so makes things rather confusing:
A mod_wl_ssl.so from a straight weblogic610sp2_generic.zip install has
a cksum of "1853014778 1132467".
A mod_wl_ssl.so from a weblogic610sp1_generic.zip install with a
subsequent SP 2 upgrade install has a cksum of "1350917183 1147927".
A mod_wl_ssl.so from a plain 6.1 install with subsequent SP 1 and SP 2
upgrade installs, followed by an SP 2 uninstall and another SP 1
upgrade install, has a cksum of "1471948065 1136501".
I think I may be looking at three different plugin versions here: 6.1,
6.1 SP 1, and 6.1 SP 2, assuming the upgrade installs don't actually
change mod_wl_ssl.so. I'm not sure whether there's an easier way to
verify what version of the plugin you have.
In any case, we did try each plugin version, and none of them works
against a 6.1 SP 2 WebLogic server.
Jim
[email protected] (Jim Doyle) wrote in message news:<[email protected]>...
[snip]
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). [snip] -
Problem With Nik Plugins and Lightroom 4.3
I bought a Drobo Mini and moved my photos and my Lightroom Catalog onto it. The reason I did this was because I just bought a MacBook Pro laptop to supplement my Mac Pro Desktop and I wanted to be able to use both computers with the Drobo Mini and not have to constantly be importing Catalogs back and forth. This was a solution that Tim Grey recommended. The advantage is I can take the Drobo Mini with me on the road and add my new photos directly to the Catalog when I'm traveling, and then when I get home, I can just hook up the Drobo Mini to the Mac Pro Desktop and continue with my work. The problem I've encountered is with my Nik plugins Color Efex Pro 4 and Silver Efex Pro 2. On the new computer everything works fine. On the desktop computer I can't go directly from Lightroom into Color Efex Pro 4 or Silver Efex Pro 2 for the new photos initially downloaded from the new computer. For all my photos downloaded through the old computer, both computers work fine. Only the new computer works with the Nik Filters for the new photos. Also, if I go over to Photoshop from Lightroom, the new photos won't let me just hit "Save" and exit Photoshop. Instead, I have to designate a location for the "Save" as if I was doing a "Save As" and then it doesn't show up in Lightroom unless I import it again. I'm trying to get some answers from Nik but I thought maybe someone on this forum might know what is causing this problem?? Any help greatly appreciated.
SaratogaLeftyNik developers don't participate in this forum -- it's mainly for developers to discuss technical issues of using the Lightroom Software Developer Kit. You might have better luck reposting in the main LR forum:
http://forums.adobe.com/community/lightroom -
Problem with apache mod_python and django
Hi guys,
I've correctly installed django from svn, and set up apache with mod_python.
I created my infotreni project into /home/httpd/html/ , edited /etc/httpd/conf/httpd.conf adding this:
<Location "/">
SetHandler python-program
PythonHandler django.core.handlers.modpython
SetEnv DJANGO_SETTINGS_MODULE infotreni.settings
PythonDebug On
PythonPath "['/home/httpd/html'] + sys.path"
</Location>
Alias /media "/usr/lib/python2.5/site-packages/django/contrib/admin/media/"
<Location "/media">
SetHandler None
</Location>
<Location "/phpmyadmin">
SetHandler None
</Location>
It seems to work fine, but there are some missing css files located in /usr/lib/python2.5/site-packages/django/contrib/admin/media/ . I've read several tutorials but I'm not able to let it work properly. :(
Last edited by uastasi (2007-11-29 15:40:14)Hi guys,
I've correctly installed django from svn, and set up apache with mod_python.
I created my infotreni project into /home/httpd/html/ , edited /etc/httpd/conf/httpd.conf adding this:
<Location "/">
SetHandler python-program
PythonHandler django.core.handlers.modpython
SetEnv DJANGO_SETTINGS_MODULE infotreni.settings
PythonDebug On
PythonPath "['/home/httpd/html'] + sys.path"
</Location>
Alias /media "/usr/lib/python2.5/site-packages/django/contrib/admin/media/"
<Location "/media">
SetHandler None
</Location>
<Location "/phpmyadmin">
SetHandler None
</Location>
It seems to work fine, but there are some missing css files located in /usr/lib/python2.5/site-packages/django/contrib/admin/media/ . I've read several tutorials but I'm not able to let it work properly. :(
Last edited by uastasi (2007-11-29 15:40:14) -
Precondition Failed problem with apache plugin using SSL
I got a "Precondition Failed" while trying to use apache + mod_ssl + mod_wl128_20.so.
I am using Apache 2.0.52 & WebLogic 8.1 SP4 on Windows 2K Server.
The web.xml is something like this:
<security-constraint>
<web-resource-collection>
<web-resource-name>Secured</web-resource-name>
<url-pattern>/appmanager/Portal/desktop</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
While the httpd.conf is:
<IfModule mod_weblogic.c>
SetHandler weblogic-handler
WebLogicHost localhost
WebLogicPort 7001
MatchExpression *
</IfModule>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
<VirtualHost localhost:443>
<IfModule mod_weblogic.c>
DEBUG ALL
SetHandler weblogic-handler
SecureProxy ON
TrustedCAFile C:/bea81/weblogic81/server/lib/CertGenCA.der
RequireSSLHostMatch FALSE
WebLogicHost localhost
WebLogicPort 7002
KeepAliveEnabled false
MatchExpression *
</IfModule>
The proxy of http is fine and I can also use port virtualhost 443 map to weblogic http (port 7001).
But when I use 443 map to 7002 (SSL), I got an error:
Precondition Failed
The precondition on the request for the URL /MyPortal/appmanager/Portal/desktop evaluated to false.
When I turned on the DEBUG ALL in httpd.conf, I find an error message:
================New Request: [GET /MyPortal/appmanager/Portal/desktop HTTP/1.1] =================
Thu Aug 11 14:29:44 2005 INFO: SSL is configured
Thu Aug 11 14:29:44 2005 SSL Main Context not set. Calling InitSSL
Thu Aug 11 14:29:44 2005 ERROR: SSL initialization failed
Can anyone help me? Please email me by [email protected]
Thanks very much!I got past the initial problem. You need to run der2pem and use the pem file not the der file.
-
Right problem with apache and tomcat
Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;Run it from the shell to see whats wrong:
# httpd -
Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?
It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0 -
Looking to pass a "root" request to a WL server with Apache plugin
Anyone know of a way to disclude a URL from the <Location> directive? I'm
using the Apache plugin and would like to pass all requests through to the
WL server except the images (which can be identified either by extension or
by location (/images)). I want a request for http://apacheserver/ to get
passed to the WL server and execute some default servlet. However... if I
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Any ideas?Thanks for the help.
Two location directives:
<Location /myApp> and
<Location /myImages>
would end up passing my images request through to WL, no?
The way I have it set up now, I have one tag:
<Location /myApp>
which (obviously) passes the /myApp/* requests to WL. This is good...
any other request such as /images/myimage.gif stays on the web server. The
only problem is that
the initial hit to the site (www.mycompany.com) does not get passed through
and
I need it to map to a servlet on the WL server, without disrupting the flow
of a
/images/* request.. I have no images on the WL server.
Anyone know of a way to disclude a URL from the <Location> directive?I'm
using the Apache plugin and would like to pass all requests through tothe
WL server except the images (which can be identified either by extensionor
by location (/images)). I want a request for http://apacheserver/ to
get
passed to the WL server and execute some default servlet. However... ifI
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Have your application reside at /myApp and images in /myImages. Then two
<Location> stanzas,
one for /myApp and one for /myImages will do what you want. I have an
open case with support
where I wanted /myApp/myImages and /myApp to resolve in the order the
<Location> directives
were found in httpd.conf, in much the same way you can have / and
/images with
Apache handling /images and WLS handing / . The case is still open and
the workaround is
described in the first sentence of this paragraph :) -
Hi all,
a lot was said already about problems with using Nik plugins in PS5 64 bit mode, but I'm not getting closer to a final solution.
I have installed all latest NIK plugin updates without problems.
According to their website all of their plugins are running now in a 64 bit mode.
In CS4 I can open and work with all plugins, BUT ONLY after removing the 'Selective Tool' from the plugin folder.
When it is not removed, PS4 is crashing all the time immediately after opening.
In Dfine plugin I noticed that my pointer is always a bit flickering during processing.
In CS5 it is the same; if the Selective tool is in the Plugin folder, it won't opening.
After removing it, in 32 bit mode I can open and work with all installed plugins.
But in 64 bit mode I'm able to work only with Silver Efex and HDR Efex Pro, but as soon I open Dfine, Sharpener, Viveza or Color Efex CS5 is crashing immediately.
I'm running a Mac pro with plenty power, ram etc, all updated and cleaned up.
What is other people's latest experience regarding that issue?
ThanksHi to all,
here I like to give you an update on my experience with NIK Plugins.
After beeing unable to solve my NIK problems by myself and in the forum I was contacting NIK, and their respons email told me only the following:
"In case of experiencing problems with their plugins in 64 bit mode remove all Duplicate Ariel Fonts"
Since I read about that already earlier, that reason had been ruled out.
BUT I got the idea simply to remove all my Arial Fonts from my Library (to the Desktop), and surprisingly ALL NIK plugins now were functioning without bringing CS5 to crash at start-up.
Unfortunately over the last days, especially on working with big file size pictures (around 200 MB) and plenty layers, CS5 crashed again often after initializing of the plugins.
Than I read today the post from Grey Havens, who suggested to set the percentage of RAM what Photoshop should use to maximal 60%.
Since I do have 14 GB RAM available, I indeed reduced the settings from 85% to 65%.
2 of my 3 internal HD's are assigned as scratch disk, as recommended by Adobe.
Thanks Grey, as you described, all plugins are opening now very fast, and I just tried all applications with big files, many layers and CMYK files,
without having any crash so far anymore.
If this continues, than I dont have to use my CS4 or the CS5 in 32 bit mode anymore, which would make all easier for me.
Than it also doesn't matter that Photoshop has less RAM assigned, because in 64 bit mode the almost 9 GB RAM assigned is for me more than enough.
So what worked for me, might work also for other people with same problems:
--- I had to remove the 'Selective Tool' from all plugins in CS4 and in CS5
--- I had to remove all Arial Fonts from my Font Library
--- I set in Preferences Performance the 'Let Photoshop Use RAM' to 65% only
Regards
Michael -
A problem with DigitalPersona plugin in ff5.
Hi. Got a problem with DigitalPersona plugin. I'm using FF5 now, so it doesn't work, but I wonder if there's a way to deal with it. I mean, maybe someone know anything to make it work on FF5 without violating their rights. When using almost 50 symbol passwd it's some kind of bothering without DP ;p
After more searching and plugin decompiling, I found that the problem occurs when it tries to access to the registry using the following key:
"Software\\Serena\\Dimensions\\" + System.getProperty("oracle.jdevimpl.vcs.dimensions.clientVersion", "9.1") + "\\PC Client"
I don't know where the value of "oracle.jdevimpl.vcs.dimensions.clientVersion" is supposed to come from.
I tried to set it using the jdev.conf file:
AddVMOption -Doracle.jdevimpl.vcs.dimensions.clientVersion=10.1
It works a little better: I get the connection window. But when I provide the connection parameters and clic on "OK", I get the following error message:
"Could not recognize output from the command."
We are using Dimensions 10.1.3.
Is this version not compatible with the plugin ? -
Problems with ListViews Drag and Drop
I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
// Can only drag leafs
JTree tree = (JTree) dragGestureEvent.getComponent();
TreePath path = tree.getSelectionPath();
if (path == null) {
// Nothing selected, nothing to drag
System.out.println("Nothing selected - beep");
tree.getToolkit().beep();
} else {
DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
.getLastPathComponent();
if (selection.isLeaf()) {
TransferableTreeNode node = new TransferableTreeNode(
selection);
dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
node, new MyDragSourceListener());
} else {
System.out.println("Not a leaf - beep");
tree.getToolkit().beep();
} -
Problems with Customer Service AND unexplained charges!
I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges. -
Problems with dropped calls and no reception on Samsung Continuum
My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)
Maybe you are looking for
-
Can i transfer service from one iphone to another
can i tranfer service from one iphone to another
-
When I try to sign into my Apple ID account, I get a message that says "An unknown error has occurred". I reset my password but that has not helped. I am trying to update iPhoto. I just installed Maverick X. Thank you
-
Hi All, I' ve added an user defined field in Sales forecast-rows. But when I open the Sales forecast window that particular UDF is not displays. If am add in the Title it is displays. Let me know how to get it display in the rows. Regards, Venkates
-
Oracle 11g - Solaris 10 on cisco UCS server
I would like to know if anyone has experience with installing Oracle databases on cisco UCS servers. I recently took over a dba shop and my client has purchased a cisco UCS server and is planning on migrating some databases currently on dedicated se
-
Saving files in Photoshop CC Mac
I upgraded to Photshop CC Mac and I'm having a problem saving files. My last version was PS5 and when I saved a file I could go to the drop down tab, there would be the name of my folder, click the folder and click one a file with a similar name and