Problems with .asp email code - please help!

Hi
I am pretty new to Dreamweaver and still on a huge learning
curve (not very 'technically minded" either) and I have come across
a problem that apparently Dreamweaver does not supply a solution
to. It seems that the only way to solve this is to buy another
piece of bolt-on software.
However, I am sure that there is a very simple line of code
that will solve my problem..........
I have created a form on a website page that sends
information back via a process.asp page to an email address, both
pages are suffixed .asp
(I have created the process.asp form by working out the
relevant bits of code on other websites that have been written for
my company).
The form uses fields to be filled in, and I have managed to
write the process.asp page so that it successfully returns all the
relevant info correctly to the specified email address. However my
problem lies with the fact that I now need to use a drop-down menu
to select an item from a list. I have added the menu into to the
form, but I have not got a clue as to how the code on the
process.asp page needs to be written in order to send the selected
info back in the email.
As an example of how the process.asp has been written, see
below:
body = body & "Surname " &
request("surname") & " "
body = body & "Address Line 1 " &
request("address line 1") & " "
etc.
I would be very grateful for any guidance you may be able to
give me.
Many thanks
Ruth

>It seems that the only way to solve this is to buy
another piece of bolt-on software.
I don't understand this comment.
>but I have not got a clue as to how the code on the
process.asp page needs to be
>written in order to send the selected info back in the
email
body = body & "Surname " &
request("surname") & " "
body = body & "Address Line 1 " &
request("address line 1") & " "
body = body & "My New Drop Down Menu "
& request("mydropdownfieldname") & " "

Similar Messages

HT5312 I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

We are fellow users here on these forums, you're not talking to iTunes Support.
If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Firefox is having problems with "Southwest Airlines website" Please help soon

Whenever I go on Southwest Airline website, it does not work. I am having this problem since last month. Please help on this as soon as you can.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Other things that need your attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
* Shockwave Flash 10.0 r22
* Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Problem with simple drawing program - please help!

Hi,
I've only just started using Java and would appreciate some help with a drawing tool application I'm currently trying to write.
The problem is that when the user clicks on a button at the bottom of the frame, they are then supposed to be able to produce a square or circle by simply clicking on the canvas.
Unfortunately, this is not currently happening.
Please help!
The code for both classes is as follows:
1. DrawToolFrame Class:
import java.awt.*;
import java.awt.event.*;
public class DrawToolFrame extends Frame
implements WindowListener
DrawToolCanvas myCanvas;
public DrawToolFrame()
setTitle("Draw Tool Frame");
addWindowListener(this);
Button square, circle;
Panel myPanel = new Panel();
square = new Button("square"); square.setActionCommand("square");
circle = new Button("circle"); circle.setActionCommand("circle");
myPanel.add(square); myPanel.add(circle);
add("South", myPanel);
DrawToolCanvas myCanvas = new DrawToolCanvas();
add("Center", myCanvas);
square.addMouseListener(myCanvas);
circle.addMouseListener(myCanvas);
public void windowClosing(WindowEvent event) { System.exit(0); }
public void windowOpened(WindowEvent event) {}
public void windowIconified(WindowEvent event) {}
public void windowDeiconified(WindowEvent event) {}
public void windowClosed(WindowEvent event) {}
public void windowActivated(WindowEvent event) {}
public void windowDeactivated(WindowEvent event) {}
2. DrawToolCanvas Class:
import java.awt.*;
import java.awt.event.*;
public class DrawToolCanvas
extends Canvas
implements MouseListener, ActionListener {
String drawType="square";
Point lastClickPoint=null;
public void drawComponent(Graphics g) {
if (lastClickPoint==null) {
g.drawString("Click canvas first",20,20);
} else {
if (drawType.equals("square")) {
square(g);
else if (drawType.equals("circle")) {
circle(g);
public void actionPerformed(ActionEvent event) {
if (event.getActionCommand().equals("square"))
drawType="square";
else if (event.getActionCommand().equals("circle"))
drawType="circle";
repaint();
public void mouseReleased(MouseEvent e) {
lastClickPoint=e.getPoint();
public void square(Graphics g) {
g.setColor(Color.red);
g.fillRect(lastClickPoint.x, lastClickPoint.y, 40, 40);
g.setColor(Color.black);
public void circle(Graphics g) {
g.setColor(Color.blue);
g.fillOval(lastClickPoint.x, lastClickPoint.y, 40, 40);
g.setColor(Color.black);
public void mouseEntered(MouseEvent e) {}
public void mouseExited(MouseEvent e) {}
public void mousePressed(MouseEvent e) {}
public void mouseClicked(MouseEvent e) {}
Any help would be appreciated!

Some of the problems:
1) nothing calls drawComponent(Graphics g)
2) Paint(Graphics g) has not been overriden
3) myCanvas is declared twice: once as an instance variable to DrawToolFrame, and once local its constructor. Harmless but distracting.

A problem with the BBM Bold9900 please help me !!

Hey All , i have a probem with my BBM , when i write something in personal message my conacts can't see what i wrote and when i put my status busy it shows that i'm avaliable, so please i want you to help me !!!!!!!!!!

Answered in your original thread.
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/a-problem-with-the-BBM/m-p/139...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with DOB security question. please help urgently

Hello,
im trying to purchase an app at the apple store but i cant for due to security problems.
my date of birth was ( RANDOM ) when i first signed up for this account ( BANDORI5) and now it kept asking me for it. not only my DOB but my secret questions as well. i was in a hurry was i wrote random stuff most of it. i never had any problem purchasing apps for while but now its asking me and put me to frustration. please help me resetting my account.
my generate code ****.
ID : Bandori5
thank you.
<Edited By Host>

I'm not sure what the 'generate code' is that you refer to, but I've asked the hosts to remove it - these are user-to-user forums.
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Strange problem with JDBC.. Please help !!

I have this problem. I need to extract certain fields from a database, one of which is VARCHAR(255). I have stored it in a string. When I ask the applet to output the string, it works normally. Code :
try { Class.forName("com.mysql.jdbc.Driver").newInstance(); con = DriverManager.getConnection("jdbc:mysql://localhost:3306/dump", "root", "lmts2005"); st = con.createStatement(); rs = st.executeQuery("SELECT*FROM datalog_tbl"); while (rs.next()) { String data = rs.getString(8); System.out.println("The database contains " + data ); }
But I need to perform certain operations on the string. For example, if I use the substring method, it doesn't work :
try { Class.forName("com.mysql.jdbc.Driver").newInstance(); con = DriverManager.getConnection("jdbc:mysql://localhost:3306/dump", "root", "lmts2005"); st = con.createStatement(); rs = st.executeQuery("SELECT*FROM datalog_tbl"); while (rs.next()) { String data = rs.getString(8); String lol = data.substring(22,25); System.out.println("The database contains " + lol ); }
The 2nd piece of doesn't give any output, even though it compiles fine.
Please help.

Problem solved. Turns out that some of the string were less than 25 length. Sorry to bother you all with such a silly problem.

Problem with threads and simulation: please help

please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
 private JButton choices[];
 private String names[]={"line", "square", "oval"};
 private JPanel buttonPanel;
 private DrawPanel drawingArea;
 private int width=300, height=200;
 public void init(){
 drawingArea=new DrawPanel(width, height);
 choices=new JButton[names.length];
 buttonPanel=new JPanel();
 buttonPanel.setLayout(new GridLayout(1, choices.length));
 ButtonHandler handler=new ButtonHandler();
 for(int i=0; i<choices.length; i++){
 choices=new JButton(names[i]);
 buttonPanel.add(choices[i]);
 choices[i].addActionListener(handler);
 Container c=getContentPane();
 c.add(buttonPanel, BorderLayout.NORTH);
 c.add(drawingArea, BorderLayout.CENTER);
 }//end init
 public void setWidth(int w){
 width=(w>=0 ? w : 300);
 public void setHeight(int h){
 height=(h>=0 ? h : 200);
 /*public static void main(String args[]){
 int width, height;
 if(args.length!=2){
 height=200; width=300;
 else{
 width=Integer.parseInt(args[0]);
 height=Integer.parseInt(args[1]);
 JFrame appWindow=new JFrame("An applet running as an application");
 appWindow.addWindowListener(
 new WindowAdapter(){
 public void windowClosing(WindowEvent e){
 System.exit(0);
 DrawShapes appObj=new DrawShapes();
 appObj.setWidth(width);
 appObj.setHeight(height);
 appObj.init();
 appObj.start();
 appWindow.getContentPane().add(appObj);
 appWindow.setSize(width, height);
 appWindow.show();
 }//end main*/
 private class ButtonHandler implements ActionListener{
 public void actionPerformed(ActionEvent e){
 for(int i=0; i<choices.length; i++){
 if(e.getSource()==choices[i]){
 drawingArea.setCurrentChoice(i);
 break;
}//end class DrawShapes
class DrawPanel extends JPanel{
 private int currentChoice=-1;
 private int width=100, height=100;
 public DrawPanel(int w, int h){
 width=(w>=0 ? w : 100);
 height=(h>=0 ? h : 100);
 public void paintComponent(Graphics g){
 super.paintComponent(g);
 switch(currentChoice){
 case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
 break;
 case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
 break;
 case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
 break;
 public void setCurrentChoice(int c){
 currentChoice=c;
 repaint();
 private int randomX(){
 return (int) (Math.random()*width);
 private int randomY(){
 return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!

It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with adobe acrobat/reader - please help!

Hello,
My acrobat reader was fine and I was able to open the pdf files sent to me, then suddenly it just wouldn't open anything at all. It went into open mode and just stayed there, and wouldn't let me close it. Then I got a message saying "there is a problem with adobe acrobat/reader. Please exit and try again". I've done this lots of times and it still isn't working.
I would be very grateful for any help or suggestions. I have windows 7, and as I said its all been fine up until now.
Thanks.
mspryce.

This is the Acrobat forum, not the Reader forum. You should check the reader forum. In the meantime, if you are not running AR9.3 or so, you should update. Prior versions before 9 are not designed for Win7 and that might be your issue -- you gave no indication of version.

Problem with interputting accessframe example please help!!!

A use code bellow to access every frame in the movie :
import java.awt.*;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.Format;
import javax.media.format.*;
import java.io.*;
import javax.imageio.*;
import javax.imageio.stream.*;
import java.awt.Color.*;
import java.awt.image.*;
import java.util.*;
import java.awt.image.*;
import javax.media.util.*;
import javax.swing.JFrame;
public class Film2ramki implements ControllerListener {
Processor p;
Object waitSync = new Object();
boolean stateTransitionOK = true;
public boolean alreadyPrnt = false;
public void zakoncz(){
 p.stop();
 p.close();
 p.deallocate();
public boolean open(MediaLocator ml) {
try {
p = Manager.createProcessor(ml);
} catch (Exception e) {
System.err.println("Failed to create a processor from the given url: " + e);
return false;
p.addControllerListener(this);
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured)) {
System.err.println("Failed to configure the processor.");
return false;
// So I can use it as a player.
p.setContentDescriptor(null);
// Obtain the track controls.
TrackControl tc[] = p.getTrackControls();
if (tc == null) {
System.err.println("Failed to obtain track controls from the processor.");
return false;
// Search for the track control for the video track.
TrackControl videoTrack = null;
for (int i = 0; i < tc.length; i++) {
if (tc.getFormat() instanceof VideoFormat) {
videoTrack = tc[i];
break;
if (videoTrack == null) {
System.err.println("The input media does not contain a video track.");
return false;
System.err.println("Video format: " + videoTrack.getFormat());
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = { new PreAccessCodec(),
new PostAccessCodec()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
System.err.println("The process does not support effects.");
// Realize the processor.
p.prefetch();
if (!waitForState(p.Prefetched)) {
System.err.println("Failed to realize the processor.");
return false;
p.start();
return true;
boolean waitForState(int state) {
synchronized (waitSync) {
try {
while (p.getState() != state && stateTransitionOK)
waitSync.wait();
} catch (Exception e) {}
return stateTransitionOK;
public void controllerUpdate(ControllerEvent evt) {
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
 p.stop();
 p.close();
 System.exit(0);
Film2ramki(){}
public void startnow (String plik) {
 //this.setDefaultCloseOperation(this.EXIT_ON_CLOSE);
String url = "file:"+plik;
if (url.indexOf(":") < 0) {
prUsage();
System.exit(0);
MediaLocator ml;
if ((ml = new MediaLocator(url)) == null) {
System.err.println("Cannot build media locator from: " + url);
System.exit(0);
if (!open(ml))
System.exit(0);
static void prUsage() {
System.err.println("Usage: java Film2ramki <url>");
* Inner class.
* A pass-through codec to access to individual frames.
public class PreAccessCodec implements Codec {
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Pre: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
* The code for a pass through codec.
// We'll advertize as supporting all video formats.
protected Format supportedIns[] = new Format [] {
new VideoFormat(null)
// We'll advertize as supporting all video formats.
protected Format supportedOuts[] = new Format [] {
new VideoFormat(null)
Format input = null, output = null;
public String getName() {
return "Pre-Access Codec";
// No op.
public void open() {
// No op.
public void close() {
// No op.
public void reset() {
public Format [] getSupportedInputFormats() {
return supportedIns;
public Format [] getSupportedOutputFormats(Format in) {
if (in == null)
return supportedOuts;
else {
// If an input format is given, we use that input format
// as the output since we are not modifying the bit stream
// at all.
Format outs[] = new Format[1];
outs[0] = in;
return outs;
public Format setInputFormat(Format format) {
input = format;
return input;
public Format setOutputFormat(Format format) {
output = format;
return output;
public int process(Buffer in, Buffer out) {
// This is the "Callback" to access individual frames.
accessFrame(in);
// Swap the data between the input & output.
Object data = in.getData();
in.setData(out.getData());
out.setData(data);
// Copy the input attributes to the output
out.setFlags(Buffer.FLAG_NO_SYNC);
out.setFormat(in.getFormat());
out.setLength(in.getLength());
out.setOffset(in.getOffset());
return BUFFER_PROCESSED_OK;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
public class PostAccessCodec extends PreAccessCodec {
// We'll advertize as supporting all video formats.
public PostAccessCodec() {
supportedIns = new Format [] {
new RGBFormat()
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
if(!alreadyPrnt)
BufferToImage stopBuffer = new BufferToImage((VideoFormat)frame.getFormat());
System.out.println(stopBuffer.toString());
System.out.println("CreatedBuffer");
System.out.println("Created stopImage");
Image stopImage = stopBuffer.createImage(frame);
System.out.println("stopImage is full");
if(stopImage == null)
System.out.println("stopImage is null");
try
BufferedImage outImage = new BufferedImage (320, 240,BufferedImage.TYPE_INT_RGB);
Graphics og = outImage.getGraphics();
og.drawImage(stopImage,0,0,320,240,null);
//prepareImage(outImage,rheight,rheight, null);
Iterator writers = ImageIO.getImageWritersByFormatName("jpg");
ImageWriter writer = (ImageWriter)writers.next();
//Once an ImageWriter has been obtained, its destination must be set to an ImageOutputStream:
File f = new File("frames\\"+frame.getSequenceNumber() + ".jpg");
ImageOutputStream ios = ImageIO.createImageOutputStream(f);
writer.setOutput(ios);
//Finally, the image may be written to the output stream:
//BufferedImage bi;
//writer.write(imagebi);
writer.write(outImage);
ios.close();
catch(IOException e)
System.out.println("Error :" + e);
//alreadyPrnt = true;
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Post: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
if(frame.getLength()==0){p.stop();p.close();p.deallocate();}
public String getName() {
return "Post-Access Codec";
this code capture every frame from movie but it never ends running and i can't invoke any metod after grabing frames becouse its still running. How Can I stop this to enter the next metod.
Please help me
thx

Answering sam04 question Yes this make that every frame is captured
Back to my problem :
I invoke caputre frames class from other class like this:
Film2ramki f2r=new Film2ramki();
f2r.startnow(pathtomov);
System.out.println("End of capture");...........................
So when capturing frames ends it should print "End of caputre" but I get something like this :
JPEG, 320x240, FrameRate=13.0, Length=18198
Video format: JPEG, 320x240, FrameRate=13.0, Length=18198
Pre: frame #: 1, time: 0.0, len: 16282
Post: frame #: 1, time: 0.0, len: 230400
End of capture
Pre: frame #: 2, time: 0.07, len: 16471
Post: frame #: 2, time: 0.07, len: 230400
Pre: frame #: 3, time: 0.15, len: 16620
Post: frame #: 3, time: 0.15, len: 230400
Pre: frame #: 4, time: 0.23, len: 16541
Post: frame #: 4, time: 0.23, len: 230400
Pre: frame #: 5, time: 0.3, len: 16749
Pre: frame #: 18, time: 1.3, len: 15708
Post: frame #: 18, time: 1.3, len: 230400
Pre: frame #: 18, time: 1.3, len: 0
Post: frame #: 18, time: 1.3, len: 0this is strange becouse it captures 1 frame end print "End of capture" and then its capures other frames. Why ?????

Problem with Logic XS Key, PLEASE HELP

I use my G4 Powerbook laptop for live. I am running most recent version of logic.
What happens is that Logic will load up fine, but then for no apparent reason logic will come up with an error message saying that the logic key has been removed, but i have not touched it!! I then have to restart logic.
PLease help i have to get this sorted ASAP cuz i have a gig tomorrow nite. Cheers guys

Hmm, it does it on both USB ports? And you haven't noticed any problems with other USB gear on those ports?
When the key is next not recognised by Logic, go into the system profiler and find your USB port that the XS key is on - the XS key will be labelled when it's functioning correctly. Is it still recognised by the computer, or has it gone completely?

Problem with Desktop Skype freezing, please help

2 days ago, Dec. 23rd, I started up Skype as usual, but after about a minute, it froze, soon becoming "not responding". I opened Task Manager to try to end it manually, but Task Manager quickly became "not responding" as well, as did Chrome when I opened it when I tried to search for a solution. This had never happened before, and since has only happened when I am trying to use Skype for Desktop. I tried uninstalling and reinstalling multiple times, switching to an older version, and running an antivirus scan to see if a virus might be causing the problem, but none of this helped, and it still freezes itself along with all my other programs, forcing me to restart my computer if I want to be able to use it. I have been using Windows 8 Skype instead today, with no problems, but Skype for Desktop is more convenient for me, and I would very much appreciate it if someone would please help me.
Also, I don't know if this might be related to the problem, but today I had Task Manager open before starting Skype for Desktop, hoping I could end it before it caused everything to freeze (I couldn't), I was able to see before it froze that Skype was using 100% of my Disk.
Solved!
Go to Solution.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Weird problems with kt7 turbo (6330), PLEASE HELP!!

I just this last week purchased an older kt7 turbo (6330) to upgrade my brother's computer. I am pairing this with an Athlon XP 1700 processor. After installing all the hardware and booting up the computer, I started getting various errors. Sometimes the screen would just flash all kinds of colors, sometimes it would say something about a bios check not detecting the a: drive followed by insistent beeping, sometimes it just wouldn't start at all. After much hassle, I finally got the newest bios installed from MSI that claimed to fix some stuff between this motherboard and an Athlon XP 1700. (I didn't at the time suspect this to be the true culprit) Finally on Sunday afternoon, after a cold start, it magically started up and I finally got Windows XP installed. I found some drivers on the reference CD that seemed to help some. But now, after about 5-10 minutes, depending on the software being used, the computer will just shut itself down after a 60 second warning message. When I try reseting it, I start getting all of those weird errors again. The only way to get the computer to start up normally again is to let it sit for about 10-15 minutes to cool down, and then cold start it. At which point it will work again for another 10-15 minutes and shut down again. I am getting SOOOOO tired of these MSI motherboards not working for me!! I think MSI has a personal problem with me. PLEASE help me!! By the way, I don't think it's power related, cause I just put in a brand new P4 certified 400Watt powersupply.

Sounds like your heatsink on your CPU may not be seated correctly. Try pulling it, cleaning, reapplying compound, and reseating it.

Problem with touch screen. Please help!!!

Ok I bought an iPad about a month ago now. At first it worked perfectly, runs apps smoothly, etc. But then something happened to the touch screen, it just randomly like pressed itself, it went into apps on its own and zoom in and out while on safari just randomly. For about 3 weeks this issue disappeared, but now it happens again but more constantly and for more time please help. I think this video will explain my issue more clearly. http://www.youtube.com/watch?v=e1qyvHV43yg Please I just don't want this issue anymore. Any help will be appreciated.

OK...so it seems that many iPad owners have the same issue with the screen "self registering touches". You'll see multiple posts on the forums from "self touching" to "self registering" to "freaking out".
Well, I also have this annoying problem.
Trust me when I say that cleaning the screen, resets, charging, deleting apps, static, and so on haven't anything to do with causing or resolving this issue.
Here is a little tip to show you what is actually going on. Download a free app that shows you "screen touches". Harbor Master is one that I've heard of that led me to this...but I prefer to use that pocket pond app...only because I can just sit back and watch without having to move boats around.
...When you notice the problem, open up the app. I've noticed on mine that it only self registers touches along the side. Exact location is (when holding iPad in landscape position, home button on left) along the top of the screen...from top middle to the top right corner.
I have called Apple...the tech was polite and tried to help. ...But the only suggestions were to reset (as i've already done) then if that didn't work I was to do a reload while sync'd. He stated that if none of that worked then to take it to the store...
Since I am in Florida for the month and the nearest Apple store is 6hrs away...I will wait until I go back home HI and visit a store that is close by.

Problems with .asp email code - please help!

Similar Messages

Maybe you are looking for