Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

Similar Messages

I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Need some help with ati drivers and i think xorg

i installed ati-dri and xorg and can boot up kde (sort of) because when kde starts it glitches and its semi-different each time but the main point is i think i have to downgrade xorg or mabye i dont have correct drivers for my graphics card (ati radeon HD 4650).
Last edited by leercrak (2010-12-02 02:23:44)

Edit: im going to do a full install of kde and hope that works. my lspi | grep VGA does indeed show the correct video card and the only other problem i can think of would be when ive tried to install certain catalyst-utils and other catalyst related packages im getting a pacman cant install missing dependencies catalyst=10.11 so i went searching for a catalyst=10.11 but it was never that exact name and nothing seemed to work.
major edit: i got xorg working and can probably handle it from here.
Last edited by leercrak (2010-12-02 05:17:36)

G580 + Win8.1 - problems with Bluetooth drivers and Dolby

Hello
When I bought my Lenovo G580, it had Win8 installed but I had to upgrade to Win8.1 (sadly). I've been having problems ever since.
When I open Lenovo Solution Center, it shows errors with these drivers:
Bluetooth Audio Device
Virtual Bluetooth Support (Include Audio)
Bluetooth LWFLT Device
Status: Deactivated
In Device Manager there's a yellow error thingy on Bluetooth Audio Device. It says something about code 10. It also says it is updated to the newest version. I checked Lenovo's website (just in case) but there's no newer driver.
Second problem is with Dolby Advanced Audio V2. I've tried uninstalling it, reinstalling it. Uninstalling Conexant Audio Driver, reinstalling, etc. Nothing works. After a few days after upgrading to Win8.1 the first time my pc went totally crazy. Nothing was working, so I had to revert back to Win8 but was forced to upgrade again. I haven't done anything after the last upgrade because I don't know what to do. Hope someone can help.

hi jonhildelia,
Welcome to the Lenovo Forums.
For the bluetooth, can you try the following (after upgrading the machien to Win8.1):
1. Navigate to Control Panel (Icon Views) > Programs and Features and on the list of installed programs, uninstall the Bluetooth Driver.(reboot if necessary). When finished, the bluetooth device in the device manager should now look like this:
2. if everything goes well, reinstall the Windows 8 bluetooth Driver (either from the D:\drivers\bluetooth or from the G580 download page)
For the Dolby, the issue might be similar to this article and this thread.
Can you try the following:
1. Uninstall the Conexant Audio Driver and anything that relates to Dolby from the Control Panel (Icon Views) > Programs and Features
2. Re-install the Conexant Audio Driver (Win8 version) from the D:\Drivers folder or from the G580 Downloads page (this should reinstall the audio driver and Dolby).
3. In an event that the Dolby doesn't work, reinstall it from one of theseC:\drivers\audio\DolbyGUI or C:\drivers\audio\DolbyGUI
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with ATI 9200 and Xorg

I have problems by setting up the Xorg server to work. I have build some xorg.conf files but every give me a blank screen. I have used the tutorial on wiki for ATI cards but i became the same problem. How to fix this ?

Ok here is my xorg.conf (generate by hwd -xa command)
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "croat"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

Having problems with Camac drivers and labview

I have a Lecroy 2249SG adc with a DSP6001 control board. I upgraded from LabView 5.0 to LabView 6.0 and now my Sub vi's for communicating with the CAMAC do not work. The drivers were from DSP and were for Windows NT and a previous lab member modified them to work with Windows 98. The drivers are .dll files. When I send a LAM to the CAMAC, I get a Q=0 and/or a X=0 back from the CAMAC - Q=0 means no response, and X=0 means command not accepted. My previous lab member explained the modifications like this: "I remember that I somehow looked at the code and besides a lot of unintelligable symbols I saw things that looked like the expected CAMAC commands except that they had a lot of really strange extra symbols
attached to them. I then went into LabVIEW and replaced the expected command names by these slightly messed-up versions and - surprisingly - it worked."
The company who supplied the drivers in the past no longer sells the control board, but I am trying to contact them for original drivers - don't think I will have much luck.
I'm attaching the driver(WINCAM32.dll) and the vi that is used to generate the calls.
Thanks.
Shaun
Attachments:
WINCAM32.dll ‏1000 KB
CamacOutput.VI ‏18 KB

I searched NI's site to see if they had a driver for you. I've never worked with this instrument so I can't offer too much in the way of communicating with it. You might want to post this to the Instrument Control Forums (GPIB, etc) to see if people there may have used this.
J.R. Allen

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Xorg7 Problem with ATI driver?

After upgrade my X sever crash :cry:
I see a error message saying something like this:
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(WW) ****INVALID IO ALLOCATION**** b: 0x3000 e: 0x30ff correcting
(II) window:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
[0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
Requesting insufficient memory window!: start: 0x0 end: 0xffff size 0xd0220100
(EE) Cannot find a replacement memory range
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd02100ff (0x100) MX[B]
This is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "xtrap"
Load "glx"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "STN"
ModelName "S/T 77E/76E"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:4:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

I hada problem with ATI in my xorg 7 and my solution was to change the xorg.conf driver to ...vesa.
I don't know if your card supports fglrx but I suspect it may not and the ati-drivers are for that function.
Just a thought...

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with ATI Radeon HD 2600, electrical interference or flickering pix

Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,

When you called Applecare or went to a Genius bar were they of no help?

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

E7-00 Problem with MTP drivers winXP service pack ...

I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
I have win XP sp3, installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
What should i do.
Cheers
Aleksandar

NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

If you have a problem with Adobe products, voice your issues with them.
It is the software developers responsibility to maintain compatability
with any operating system, beit OSX or Windows.

Problems with ATI drivers and gnome3?

Similar Messages

Maybe you are looking for