Problems with Audigy 2 ZS ASIO driv

I have some problems with ASIO drivers in my Soundblaster Audigy 2 ZS Platinum Pro. I use the program Cubase SE. When I select the SB Audigy 2 ZS ASIO 24/96-driver, it works for some time but then the sound starts cracking and popping and eventually doesn?t work at all until you reselect the driver. And with the SB Audigy 2 ZS ASIO-driver I can only record in mono, even though I checked the inputs. I think the Creative ASIO-driver had the same problem. Actually the ASIO Multimedia Driver has functioned the best. What could be the problem?

Indeed, if you think it's something that might be useful to others aswell, then it would be nice to have it up here
Cat

Similar Messages

  • Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

    Hi!
    I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

    Hi:
    See if this driver works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en​...

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • TS1363 I Have Problem With My Apple Mobile Device Driver It says "This device cannot start. (Code 10)" What to do?

    When I plug My device To Pc(Windows Xp) It says Problem With Your Apple Mobile Device Drive ,I cheak in Device manger Its shows "This device cannot start. (Code 10)" Help pls..

    All I can suggeset is:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Have you looked at the AMDS topic of:
    iOS: Device not recognized in iTunes for Windows
    Do you have han image capture programs linstalled like for a camers or scanner?

  • Problems with my DVD/CD-ROM Drive (MS-8216)

    I have a BIGGGG problem with my DVD/CD-ROM Drive (MS-8216)
    I was copying somethin in my comp, and the cd got BOOOM into pieces inside.
    My warranty expired 1 month ago, so i clean it in the inside. After this it is like this :
       - i can watch 700mb movies AVI format with no problems, but when i want to copy anything in my comp from the cd it always stops rotating at 6% of copiyng and BANG it stops and an error has acourde. Same with the dvd's. Please don't ask me about my comp config couse i know it has no problem with that. I left every thing like it was inside ---  impecable, no wiress unplugged and i've upgraded the firmware also
    What can it be. Thank you

    if you can read the CD, but not copy from it, try this program:
    Isobuster
    It allows you to read with a much better accuracy than the generic windows driver.
    However, i'm afraid your drive has been damaged in the explosion and this is only a work around, not a real solution.
    The good point is that DVD burner are now cheap, but it is not much...  

  • Itunes 7.0.1 skipping problem with audigy soundcard

    Hi, I have an audigy se soundcard and running itunes 7.0.1. Whenever the cpu usage spikes (opening applications and loading animations on webpages) and I'm playing music in itunes, the music skips and cracks. I don't think it's issue with soundcard/driver cuz winamp works perfectly fine with no skips. I've tried changing audio pref (tried 8, 16, 24 bit and 32, 44.1 and 48 khz) in quicktime, all of which did't work. I don't want to change the process priority for itunes cuz i have to do it every time. Any ideas? This doesn't happen with onboard audio so it's really weird. I want to be able to use my soundcard. Thanks.

    Did you try turning your hardware acceleration setting down? I was having the same problem with the previous version of iTunes and was advised to change my acceleration setting from "full" to "basic". If you want to try this, go to the control panel>sounds and audio devices>audio tab>sound playback advanced button>pull the acceleration lever down two notches from Full to basic. Restart itunes and see if that helps.

  • Cakewalk Guitar Tracks Pro 3 doesn't list my Audigy 2's ASIO driv

    Hey, guys!? Not sure what happened with my ASIO drivers listed from my soundcard, but they are no longer listed in Cakewalk Guitar Tracks Pro 3. I'd like to use them. I can use the WDM drivers instead, but when I want to use my other recording program (Sonoma Wireworks RiffWorks), it REQUIRES Asio drivers so I'm stuck. Any suggestions? Thanks!
    Wes

    ASIOCaps just lists I/O vhannels/format, current buffer size in samples, driver status and supported samplerates for your selected ASIO driver. If you see those Creative ASIO and SB Audigy ASIO [xxxx] drivers listed there then you have all needed drivers installed properly ... also, it's possible to adjust driver latency from there by pressing the Control Panel... button.
    If you don't see those two drivers listed there then you need to reinstall Creative drivers or use Asio4All.
    Which O/S you have there (w2k, xp, vista)?
    Try to search those files mentioned in my previous reply and if you can't find both then reinstall drivers.
    BTW, also, are you sure the Audigy card is enabled on software (if you have a headset plugged or onboard sound enabled, you maybe get it'sdrivers listed instead of Audigys). Many software uses system default audio device ... when you plug say headset it maybe gets the system default audio device status .... and if you have onboard audio enabled then just switch the Audiy back as default audio device (mmsys.cpl)
    jutapa

  • Problems with audigy SE

    I recently had a problem with my sound card, it became glitch while playing battlefield 242. I reinstalled windows, downloaded the driver and I'm still getting this "product not detected" error.

    I was asking if you purchased the Audigy card separately or did it came with your computer. If the card came with your computer, you may have an OEM product.
    You might also want to check if the sound card is installed properly, go to "Device Manager" and check if the Audigy SE is listed. If you continue to experience difficulty, please get in touch with support for further assistance.

  • Problems with Audigy SE - Cannot update dri

    I've just installed Audigy SE 7.. While the sound is working just fine, I still have one problem with it:
    I was only able to install the driver that came with the cd. I've downloaded the latest driver from the creative website, SB24_VTDRV_LB__04_0077.exe, but it says that I have no compatible hardware installed. (!!!)
    I use Windows XP professional.
    thanks in advance
    Message Edited by Evenfiel on 07-23-2008 :4 AMMessage Edited by Evenfiel on 07-23-2008 :5 AMMessage Edited by Evenfiel on 07-23-2008 :36 AMMessage Edited by Evenfiel on 07-23-2008 :37 AM

    I was asking if you purchased the Audigy card separately or did it came with your computer. If the card came with your computer, you may have an OEM product.
    You might also want to check if the sound card is installed properly, go to "Device Manager" and check if the Audigy SE is listed. If you continue to experience difficulty, please get in touch with support for further assistance.

  • SoundBlaster Audigy ZS Pro ASIO DRIVER Questions w/ Cubase

    <SPAN>
    <SPAN>I am using Cubase SX 2.2 and the SoundBlaster Audigy ZS Pro. I need to gain a better understanding of the differences between the three Creative ASIO drivers that Cubase SX 2.2 recognizes. They are as follows:
    <SPAN>
    <SPAN>Creative ASIO - [Cubase sets default sample rate at 48KHz ]</LI>
    <SPAN>SB Audigy 2 ZS ASIO 24/96 (B800) [ Cubase sets default sample rate at 96KHz]</LI>
    <SPAN>SB Audigy 2 ZS ASIO [Cubase sets default sample rate at 48KHz ]</LI>
    <SPAN>I can understand that the 24/96 ASIO driver supports 24 [email]bit@96KHz]bit@96KHz[/url] recording. I am not sure what the differences are between Creative ASIO & SB Audigy 2 ZS ASIO. I have read other related post on this subject and it was stated that the Creative ASIO is the older 6 bit ASIO driver, but I noticed something interesting in relation to the input devices that Cubase SX 2.2 sees between the three are quite different, but it's opposite of what you might imagine.
    <SPAN>Here are the details:
    <SPAN>For Both Creative ASIO & SB Audigy 2 ZS ASIO, Cubase SX2.2 lists the following inputs:
    <SPAN>Line in / MIC L & R, Line in 2 L & R, Line in 3 L & R, SPDIF IN L & R
    <SPAN>and then the strange...MIX L & R, MIX FL & FR, MIX RL & RR, MIX FC, MIX LFE (?), MIX RC ( twice), MIX SL & SR
    <SPAN>No OPTICAL?
    <SPAN>For the SB Audigy 2 ZS ASIO 24/96, Cubase SX2.2 lists the following inputs:
    <SPAN>Line in / MIC L & R, Line in 2 L & R, Line in 3 L & R
    <SPAN>No SPDIF or OPTICAL?
    <SPAN>I assume the MIX inputs are for the Dolby Digital Bus Mixers in Cubase to be able to send outputs directly to the Surround Channels?
    <SPAN>I set the Latency all the way down to 2ms for each driver. Currently I am achieving a Input of 3.042ms & Output of 2.00ms w/ the 24/96KHz & w/ the other two I am achieving a Input of 4.083ms & Output of 2.00ms. Not sure why the difference?
    <SPAN>I'd really like to gain an understanding or be directed to some documentation (Audigy Manuals lack in this detail) to help explain these differences and understand why the 24/96 driver wouldn't list the same inputs if it's the same card. Is this just a bug? Any updates to fix?
    <SPAN> Sorry for the long post, but I felt if I should this detail I may get some good insight to from yall experts out there.
    <SPAN>ANY Help will be greatly appreciated!!
    <SPAN>
    <SPAN>THX,
    <SPAN>KeyMix

    Maggard wrote:
    I just reformatted my XPS Gen 5 and apparently the Audio Driver I need for the aforementioned card is no longer supplied by Dell.
    This specific Audio driver isn't listed for download by Dell and isn't available for download on CreativeLabs anymore. Here's the details:
    Soundblaster Audigy 2 ZS SC w/FireWire Multimedia Audio
    SP 0358
    Dell said for me to contact CreativeLabs since they no longer have the driver.
    Where can I get it's
    Thank you.
    As it's an OEM product you have there, you probably need to modify the installer meant for original CT products. I have posted some instructions long ago so if you search here by using "ctcomp.exe" as a searching criteria you might find that thread. You also need drivers from older installer since CT made some changes to the installer so that the old ctcomp won't work with the latest driver installation. IIRC, there were a fix-up for this too available but I'm not sure where it was introduced ... was it @ DHF (link given below)?
    You can download the CD as an ISO image from BadBoys site (http://badboy.filefront.com/).
    IIRC, there were some other instructions for this @ Driver Heaven Forums and also you might already heard of YouPAX driver mod ... which can be found @ Driver Heaven too.
    jutapa

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • Slow system – problem with OS, software, memory, hard drive?

    I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
    I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
    At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
    At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
    Thanks in advance for any advice, and apologies for long post.
    Rob

    Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

  • Problems with Audigy Platinum and Firew

    Hi,
    I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
    But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
    By the way, I already tried to re-install the drivers for the audigy...

    hi kakarocht, tks for help me.
    My mobo is new, i buy all the config recently.
    i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
    my HD SATA is the same of this, i will try to remove it, and then tell here for you.
    sorry for my english again.

  • Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

    I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S.  EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer.  I went to the Xerox website and downloaded their Printer Driver and tried again.  Now I could print from  Quark but I can NOT get to the printer window to change the type of paper, etc.  So, the problem still persists.
    Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
    Should I upgrade the whole system software?  (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
    Should I upgrade to Quark 9?
    Any help here would be apprciated.
    Thanks  - Rob

    As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software.  I hide the updates until I need them.  Usually this happens when I update or upgrade my os.  I don't fix what ain't broken is my golden rule.
    It is possible that you need to update or upgrade Quark in order for your newer printer driver to work.  First I would try the following....
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
    If your printer does not work afterwards, update or upgrade Quark.  If that does not work, contact the printer manufacturer.

  • Problem with USB External Hard Disk Drive

    I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
    I got same output from dmesg as Raistlfiren in the post before
    # dmesg | tail
    sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Info fld=0x0
    I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
    I can see that it is recognized by computer since it is shown with lsusb
    # lsusb
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    # lsusb -d 13fd:0540 -v
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x13fd Initio Corporation
    idProduct 0x0540
    bcdDevice 0.00
    iManufacturer 1 Initio
    iProduct 2 MK6025GAS
    iSerial 3 0010100500000000
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 2mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0001
    Self Powered
    From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
    Additionally, I have checked the content of /var/log/kernel.log
    Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
    Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
    Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
    Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
    Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
    Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
    Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Sep 16 22:04:03 hramat kernel: Info fld=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    and /var/log/errors.log
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
    Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
    Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
    Thank you for any help or suggestions
    Matej

    Thank you nTia89 for response. Sorry for not providing enough information.
    I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
    I did not tried to connect the disk to the computer directly, I will try it today.
    Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
    So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
    % fdisk -l
    Disk /dev/sda: 100.0 GB, 100030242816 bytes
    255 heads, 63 sectors/track, 12161 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
    /dev/sda2 1531 6672 41303115 7 HPFS/NTFS
    /dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
    /dev/sda5 * 6673 11908 42058138+ 83 Linux
    /dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
    Disk /dev/sdb: 60.0 GB, 60011642880 bytes
    64 heads, 32 sectors/track, 57231 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
    Disk /dev/sdb doesn't contain a valid partition table
    Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
    TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
    Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
    testdisk.log:
    Thu Sep 17 19:09:26 2009
    Command line: TestDisk
    TestDisk 6.8, Data Recovery Utility, August 2007
    Christophe GRENIER
    Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
    Using locale 'C'.
    Hard disk list
    Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Interface Advanced
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    NTFS at 8956/63/32
    heads/cylinder 255 (NTFS) != 64 (HD)
    sect/track 63 (NTFS) != 32 (HD)
    filesystem size 24579387
    sectors_per_cluster 8
    mft_lcn 1024141
    mftmirr_lcn 1650676
    clusters_per_mft_record -10
    clusters_per_index_record 1
    NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
    NTFS partition cannot be added (part_offset<part_size).
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Check the harddisk size: HD jumpers settings, BIOS detection...
    The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
    The following partitions can't be recovered:
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Interface Advanced
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : No
    search_vista_part: 0
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    Can't open backup.log file: No such file or directory
    interface_load
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    TestDisk exited normally.
    fixdisktable first output:
    % ./fixdisktable -d /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
    Sectors: start= 111, end= 84116382, length= 84116272
    Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
    1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
    1: 8003 1000 833f e0ff 6f00 0000 3183 0305
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    fixdisktable second output:
    % ./fixdisktable -d -r -v /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
    Sectors: start= 34148, end=36028797017147916, length=36028797017113768
    Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
    1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
    1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
    As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
    Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
    Any suggestions?

Maybe you are looking for

  • I have a new iPad but I can't go into VPN option after I uninstalled vpnoneclick app

    I have a new iPad and before I uninstall vpnoneclick app from AppStore I was able to set a VPN but now I can't even enter the VPN option please help me

  • Clusterwide exception: Failed to start dependent interface ''caf/eu/gp/api'

    Hello ! We are working with SAP Netweaver 2004s SP11 with a local repository. We are trying to deploy a web dynpro project using the guided procedures api. But we have a problem at deploy time : Finished with warnings: development component ... :Caug

  • Could some on provide OBIEE11.1.1.5.0 installation steps in AIX 64 bit

    Hi , I am new to OBIEE and we have requirement of OBIEE 11.1.1.5.0 installation in AIX 6.1 64bit. Could some one guideprerequisite details and installation steps. Thanks Venkatesh

  • Bridge CC freezes

    Since a few days I experience the following problem: When I try to open a folder in Bridge CC which contains GIF images, it freezes. After removing the GIF file from the folder with Explorer the folder opens in Bridge without a problem and the progra

  • Cookie Problem - CF Bug?

    I have a strange problem writing cookies. A demo is running at http://www.aspirenet.com/frame.cfm Here's the thing, 3 CFM pages, frame.cfm --> frame2.cfm --> frame3.cfm Frame.cfm sets up a frame and passes a LP variable in the URL to frame 2 Frame2.c