Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Similar Messages

Problem with Audigy 2ZS and Logitech z5500 speakers

Hi, all. I've had my Audigy 2ZS for a while, and I've been using Creative 4. speakers. I just got the logitech z5500 5. speakers, and I've been trying to get them to work properly with my soundcard, but it's giving me headaches.
The setup: I'm using the 3 direct inputs to go from the sound card to the speakers, so all the various digital issues I've read about *shouldn't* be issues for me.
The problem: When I do my a sound test using the Speaker Settings controller, my rear speakers are reversed, and one of them doesn't play at all! I've confirmed that all my speakers work, and I've used the diagnostic tools that come with the speakers to make sure that the speakers themselves are set up and working correctly.
Does anyone have any suggestions? I'm really frustrated...this seems like it's either a card or software issue, but I'm just not certain how to fix it.
Thanks!

I had the same problem with two different X-Fi extreme music cards. I fixed it by running the speaker test for individual speakers and changin the speaker settings ad nauseum. 'tis an issue with the jack sensing on the drivers.
If you unplug all the connectors and plug them back in, you'll find that some other channel gets screwed up.

Problem with Audigy 4 and Asus m

I own an Asus A8V motherboard, and just purchased the audigy 4 non-pro. While playing the game F.E.A.R. (main reason I bought the soundcard) with acceleration to the max, I will receive a BSOD (blue screen of death) with the 0x0000007F error code. When I turn the acceleration down 2 notches ( above the lowest) I am able to play the game without getting a bluescreen, but I will hear sounds a second or 2 after an event so this is a big problem, and have screeching problems on some ma
ps.
I've heard that some Asus mobo's and the newer Creative cards have issues, any way to fix? I'm using the latest drivers for both my mobo and my sound card.

Please can someone help?

Big Problems with Audigy 4 and Vista 64

Hi there,?I got the Audigy 4 running under Vista 64 Bit. The onboard Soundmax, connected to the speakers in my?Monitor?is acti've, too. The Audigy is connected to a 5. System from Teufel. With XP64 all ist working fine: The systemsounds come out of the monitorspeakers and the sound generated by mediaplayer etc. come from the 5. Sytem.Under Vista it is not possible to get a fine sound from the 5. System - if something is working, then only the satellites are working. The subwoofer is quiet. Also the sound from the 5. system is very bad, with a lot of breaks and so on. What?s this? How can I resolve this problem?By XP64 I have the possibility to change settings in Mediasoucecenter ... here I got nothing... rgds?McInternet?

I'm running the Audigy 4 with Vista 64-bit and it's working okay for me. It's not great - and it's pretty substantially crippled, but I'm getting sound. I would love to have proper EAX support and just some simple bass and treble controls, but it is working for me (using the March 9th drivers).

Sound problems with audigy platinum after software upgra

After updating software (and then deleteing and redownloading) I had the usual sounds from windows but no sound in other programs. The eax environment was turned to no effects. When I added effects there was then sound. This would be OK in games but is annoying when listening to news broadcasts on AOL.
Any ideas?

Well now I'm confused alright. I told you I took out the TV tuner and everything seemed fine. Wrong! The system froze again while playing a DVD movie this time. Naturally I thought about the graphics card which is an Albatron FX 5200 (yes one of those about which NVidia appologised for their technical problems). So I opened the case and took the graphics card out and it was hot! I mean you could fry eggs on it. I checked the system's temperature and I got 58 degrees Celsius for the mainboard. I forgot to mention that I live in Greece and the atmosphere's temperature now is between 29 and 35 degrees celsius. Then I rememberd reading that the new FX series by NVidia are considered very bad graphics cards and besides everything they have cooling problems. So I stuck in my old graphics card (ASUS GEforce Ti 4200) and mounted an additional cooler fan on the case. Now the mainboard's temp doesn't rise over 49-50 degrees Celsius and until this time I haven't had any freezes. My guess is it wasn't the tuner after all. It was a temperature problem and since I'm working with programs that stress the CPU and Audigy to their limits (multiple music sequencing and audio mixing software) I have a good reason to believe that. So the FX 5200 is most likely to have caused it all. Needless to say that besides the extreme temperature the card has crappy performance as well no matter the 128 MB of RAM. I just hope I won't need any more fans to be able to work.

Problem with P965 platinum and crucial ballistix tracer 6400

i just buy a new pair of crucial ballistix tracer but they dont work too well with the board, i try to set it at 4-4-4-12-24 but it wont boot, so i have to set it to 4-4-4-12-38 to boot my old corsair were runing at 5-4-4-12-24, i don't know if the boar don't work well with those memorys, any one having this problem?

Quote from: RemusM on 06-May-08, 21:24:24
Aaron is right.
At least for this summer, you should leave them at 5-5-5-15 and 1.85V
Also take care with that E6400 running at 3.2GHz. It won't last long!
The boss needs a vacation: movies, beers, hot chicks and so on.
Remus,
You preach too much! Instead of the CPU lasting ~7-8 years it will last ~4-6. I don't see why you keep a CPU that long...

Problem with Audigy SB0090 and

Hey, I found this soundcard in a box in my brothers place. I am trying to get it to work in my wife's ME system I just put together. I have no clue if its OEM or where my brother got it, nor does he. I got the ME drivers for it. Put the card in the pci slot. Turned on the computer. It sees it but no drivers. So I execute the driver download file and it says "Could not find any Sound Blaster CArd on your system. Please reinstall ... yada yada yada" What am I doing wrong here? Please help me :P

Try the CD installation from here.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677

Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

Problems with Audigy Platinum and Firew

Similar Messages

Maybe you are looking for