Problems with audio book

I have purchased "God is Not Great" Audio Book by Peter Hitchens. This is a 4 part audiobook - each part being approx 2 hourss long. It plays fine on the computer but doesn't work at all on my iPod nano. It transfers from the computer to the nano with no problem but when I play it on the nano the screen just cycles repeatedly through the four parts in quick succession and no sound comes out.
Any help would be appreciated.

Okay, after a couple of hours scouring the net and pulling my hair out, I now have to confess that I have solved my own problem - an embarrassingly easy solution as it turns out!
I have now gone to 'settings' on my iPod and found that audiobooks was unchecked for the menu options. I simply checked it again and 'hey presto' - suddenly I can find my audiobook on the iPod.
Technologically challenged? Who me?

Similar Messages

Problems with audio books from public library downloading to wrong place.

Since updating software to ios5, my books from public library no longer get downloaded to "audiobooks". Now they get downloaded to "playlists". When i am in the middle of listening to a book, and switch to listening music, it will lose my place in the book. Before the software update, this was not a problem. Is there anything I can do to get my books to download into the "audiobooks" again?

You need to wait until Overdrive get updated. That is a know problem.

Is any one else having problems converting audio books in WMA format with the new v5

Is any one having trouble with audio books in WMA formatting converting with the new ios v5

Since updating to OS5 in my itouch I have lost all my library audio books. I have downloaded a couple of new library audio books. The books look like they are being loaded into my itouch but are not there. The only way I can access them is to make a playlist for each book and drag the numbered files into the playlist folder. There are a lot of problems with this method - book chapters are not in order (I have to tried to reorder them without success) and if I stop listening to a book, when it starts again it starts at the beginning of the chapter. Before OS5 I had no trouble with WMA files or anything for that matter. I hope there is a solution soon.

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

3 Problems with Address Book-- now considering Bento

I have 3 problems with Apple Address Book that make it close to unusable for me, so I'm considering buying Bento 3:
1. *Can't un-do accidentally deleted text*- When you click in the "Notes" section, it will select all the text there by default (instead of merely inserting the cursor). If you are not paying attention, and hit any other key when it is selected, it deletes everything in there. UN-DO will not un-do this. I've verified and reported this issue to Apple, but it has still never been fixed or formally addressed (aside from many complaints in the Apple forums).
2. *Search doesn't always work*- Yesterday I searched for one of my entries, Harbor Freight, by typing in the search "harbor". Nothing came up. I thought that maybe I never actually added this business and started with a new one. After I created the new one, I noticed that now, along with the new entry, the old contact suddenly showed up in the left column.
3. *Cards disappear*- Many complaints on the web about this. I do not do any syncing with MobileMe or any device. Occasionally, cards just seem to vanish. Sometimes the card is actually still there, but changes in the Notes field or other fields I made on a previous day were evidently not saved and gone. Very frustrating.
Here's my concern with using Filemaker Pro's Bento: if it's using and accessing the same database as Address Book, all these problems might end up also existing in Bento. I use Address Book for business and personal and heavily rely on the Notes section. I can't keep wasting my time with this.
I don't mind paying the $50 for Bento if it resolves these issues, but the shared database worries me. I guess that I could create an independent Bento database that is completely separate from Address Book, but then I don't know how well it would integrate with Apple Mail.
Any thoughts?
Thanks,
Dave

DON'T DO IT. DO NOT INSTALL BENTO. I bought & installed it on 01/20/10 and it destroyed my address book. Gone forever. If you are having problems with Address Book now, wait until you see the damage created by Bento! Bento does not replace Address Book. It is a 'supplement' (at best) and uses and updates every file in your Address Book without you even knowing it! Well, you notice it when your database is destroyed and you find all of your contacts under 'No Name'. I am so serious. Bento is just a shell. None of your addresses are actually stored in Bento. They remain in Address Book. Every time you open Bento, it accesses your address book database, and starts re-formatting and re-working every entry along with any 'changes' you make. And who do you call for help? Apple says 'not our program'. Filemaker says 'we don't know anything about Mac's'.....I lost four years of addresses for all of my customers. Gone. In seconds! Just don't do it. Don't install Bento. And be sure to remove any 'smart groups' you have created as it seems to be at the root of most problems one encounters with address book.

Problems with Audio in iPhone 5

I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

Do you have the side switch enabled - do you see orange on the switch above the volume keys.
Make sure all your settings are turned up.
Try a restart of the phone by holding the home and power button until it reboots
If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

Problems with audio panning.

Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
Geoff

You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved...

Problems with audio programs after update to Maverics

After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

Problems with audio book

Similar Messages

Maybe you are looking for