Problems with audio panning.

Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
Geoff

You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved...

Similar Messages

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

Problems with Audio in iPhone 5

I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

Do you have the side switch enabled - do you see orange on the switch above the volume keys.
Make sure all your settings are turned up.
Try a restart of the phone by holding the home and power button until it reboots
If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

Problems with audio programs after update to Maverics

After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

Problems with Audio Sync and Rendering

In both problems what happens is NOT consistent. If were, would think was a setting or something I was doing wrong.
About the rendering problem. I capture either through FCP Log and Capture or through my analog to digital "box", Formac Studio TVR. In both cases record in DV setting. When I then Import these files about 3 out of 4 times they need full rendering. But doing all things the same, there is that 1 out of 4th time where no rendering is needed at all. Does not seem to matter whether I capture through FCP or Foremac. Results seem the same. Like I said to begin with, if was consistent would figure that is just how the program is. But due to the time it takes to do a render, sure would be nice if could be avoided some way.
Regarding the Audio Sync. At times, maybe 1 out 10 times, the audio is bad. It begins at the beginning of the film being out of sync maybe two or three frames. But then every 10 minutes of film it progressively get's worse, losing a good 6 to 10 frames as one goes. I can fix by doing a lot of cutting and then moving the film around till it is in sync again, but as you can imagine takes a LOT of extra work. Any ideas as to why this is happening and what could be done to prevent in future??
Thanks in advance for any help you can provide.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

Problem with audio and vga adapter in presentations

this is an odd problem. I potted a presentation that contained a qt movie. The video plays with sound just fine via the vga adapter until you plug in an external speaker system or earphone. the sound stops.
if you play a video outside keynote or play the video with out the video vga adapter or just unplug from the audio jack it works fine. am I missing something or is this a bug. For the life of me I can not figure out what the VGA in keynote has to do with audio.
John

Dr. John, this might be a little simple of an answer, but is the video jack pushed all the way in?
I had the same issue with my ipad playing a movie over a sound system and projecting it also, and discovered that the Apple issue iPad cover comes very close to interfering with the audio output jack, and that my plug into that jack wasn't all of the way in.
After that it's worked fine.

Problem with Audio in Buttons and Interactive

Hi!!
I have problems with the sound into buttons and Forms Interactive. The question is when I add a sound within a button, this it sounds directly when it enters the slides and not when the user presses the button.
How I solve it?
Thanks
NEXTsp

Hi there
It isn't a problem. The function is working as it should. You simply have a different expectation!
You have to think about it in different ways. When do you want the audio to play? When the button has been clicked, right? When you attach audio to an object such as a Button or an Image, the audio plays when that object appears. The trick here is to make an object appear on the Button click. You then attach the audio to that.
If you have Captivate 3 or older, you can enable the Success caption for the button. Attach the audio to the caption. Button is clicked, caption appears and you hear the audio.
What's that you are asking? Oh, you don't want to actually SEE a Success Caption? No problem. Choose the Transparent caption type and remove any text!
If you have Captivate 4, you can also use the same method to accomplish this. But you can also probably use the new scripting in it to make the audio play on a Button click. I can't tell you how to do that at the moment if that's the approach you want to take. I'll have to leave that to another person here that has played with the scripting to explain how it's done.
Likely it involves opening a panel, inserting or declaring a variable, adding a sound file, associating the variable with the sound file, assigning actions to the button to check the variable and change it if you need to. Stuff like that. Sounds a bit like a Rube Goldberg setup. But really that's what happens with the Success Caption method. It's just that we deal with objects and not the code behind the scenes.
Hopefully this was somewhat helpful... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Problems with audio panning.

Similar Messages

Maybe you are looking for