Problems with Audio Sync and Rendering

In both problems what happens is NOT consistent. If were, would think was a setting or something I was doing wrong.
About the rendering problem. I capture either through FCP Log and Capture or through my analog to digital "box", Formac Studio TVR. In both cases record in DV setting. When I then Import these files about 3 out of 4 times they need full rendering. But doing all things the same, there is that 1 out of 4th time where no rendering is needed at all. Does not seem to matter whether I capture through FCP or Foremac. Results seem the same. Like I said to begin with, if was consistent would figure that is just how the program is. But due to the time it takes to do a render, sure would be nice if could be avoided some way.
Regarding the Audio Sync. At times, maybe 1 out 10 times, the audio is bad. It begins at the beginning of the film being out of sync maybe two or three frames. But then every 10 minutes of film it progressively get's worse, losing a good 6 to 10 frames as one goes. I can fix by doing a lot of cutting and then moving the film around till it is in sync again, but as you can imagine takes a LOT of extra work. Any ideas as to why this is happening and what could be done to prevent in future??
Thanks in advance for any help you can provide.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

Similar Messages

Password reset problem with Password sync and Waveset exception

Hi,
We are using IdM 5 SP 5 with password sync installed on ad.
Once a user tries to change password by using Ctrl-Alt-Del, password sync intercepts the requests and then invoke an IdM change user password form, but on the log we see the following exceptions. Can anyone identity what are the nature/reason for the exceptions?
[#|2005-08-17T16:22:14.914-0400|INFO|sun-appserver-ee8.1|javax.enterprise.system.stream.out|_ThreadID=24;|
WavesetException: Constructor threw an exception.
==> java.lang.reflect.InvocationTargetException:
==> Missing required argument "operator". |#]
[#|2005-08-17T16:22:14.917-0400|WARNING|sun-appserver-ee8.1|javax.enterprise.system.stream.err|_ThreadID=24;|com.waveset.util.WavesetException: Constructor threw an exception.
==> java.lang.reflect.InvocationTargetException:
==> Missing required argument "operator".
at com.waveset.util.WavesetException.checkBreakpoint(WavesetException.java:366)
at com.waveset.util.WavesetException.<init>(WavesetException.java:159)
at com.waveset.util.Reflection.throwInstantiation(Reflection.java:266)
at com.waveset.util.Reflection.instantiate(Reflection.java:350)
at com.waveset.expression.ExNew.eval(ExNew.java:144)
at com.waveset.expression.ExNode.evalToObject(ExNode.java:439)
at com.waveset.expression.ExFunction$f_list.eval(ExFunction.java:2557)
at com.waveset.expression.ExNode.evalToObject(ExNode.java:439)
at com.waveset.object.Property.getValue(Property.java:232)
at com.waveset.object.AbstractViewHandler.getFormOptions(AbstractViewHandler.java:166)
at com.waveset.view.ChangeUserPasswordViewer.refreshView(ChangeUserPasswordViewer.java:168)
at com.waveset.view.PasswordViewer.checkinView(PasswordViewer.java:258)
at com.waveset.server.ViewMaster.checkinView(ViewMaster.java:629)
at com.waveset.session.LocalSession.checkinView(LocalSession.java:660)
at com.waveset.rpc.GenericMessageHandler.doCheckin(GenericMessageHandler.java:1491)
at com.waveset.rpc.GenericMessageHandler.syncUserPassword(GenericMessageHandler.java:2639)
at sun.reflect.GeneratedMethodAccessor177.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.waveset.rpc.GenericMessageHandler.request(GenericMessageHandler.java:350)
at com.waveset.rpc.SimpleRpcHandler.doRequest(SimpleRpcHandler.java:164)
at com.waveset.rpc.SimpleRpcHandler.doRequest(SimpleRpcHandler.java:128)
at org.openspml.server.SOAPRouter.doPost(SOAPRouter.java:500)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:264)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:221)
at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2072)
Wrapped exception:
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.waveset.util.Reflection.instantiate(Reflection.java:334)
at com.waveset.expression.ExNew.eval(ExNew.java:144)
at com.waveset.expression.ExNode.evalToObject(ExNode.java:439)
at com.waveset.expression.ExFunction$f_list.eval(ExFunction.java:2557)
at com.waveset.expression.ExNode.evalToObject(ExNode.java:439)
at com.waveset.object.Property.getValue(Property.java:232)
at com.waveset.object.AbstractViewHandler.getFormOptions(AbstractViewHandler.java:166)
at com.waveset.view.ChangeUserPasswordViewer.refreshView(ChangeUserPasswordViewer.java:168)
at com.waveset.view.PasswordViewer.checkinView(PasswordViewer.java:258)
at com.waveset.server.ViewMaster.checkinView(ViewMaster.java:629)
at com.waveset.session.LocalSession.checkinView(LocalSession.java:660)
at com.waveset.rpc.GenericMessageHandler.doCheckin(GenericMessageHandler.java:1491)
at com.waveset.rpc.GenericMessageHandler.syncUserPassword(GenericMessageHandler.java:2639)
at sun.reflect.GeneratedMethodAccessor177.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.waveset.rpc.GenericMessageHandler.request(GenericMessageHandler.java:350)
at com.waveset.rpc.SimpleRpcHandler.doRequest(SimpleRpcHandler.java:164)
at com.waveset.rpc.SimpleRpcHandler.doRequest(SimpleRpcHandler.java:128)
at org.openspml.server.SOAPRouter.doPost(SOAPRouter.java:500)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:264)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:221)
at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2072)
Caused by: java.lang.IllegalArgumentException: Missing required argument "operator".
at com.waveset.object.AttributeCondition.confirmMembers(AttributeCondition.java:436)
at com.waveset.object.AttributeCondition.<init>(AttributeCondition.java:370)
at com.waveset.object.AttributeCondition.<init>(AttributeCondition.java:408)
... 38 more
|#]
[#|2005-08-17T16:22:14.918-0400|INFO|sun-appserver-ee8.1|javax.enterprise.system.stream.out|_ThreadID=24;|
XPRESS <new> exception:|#]
[#|2005-08-17T16:22:14.918-0400|INFO|sun-appserver-ee8.1|javax.enterprise.system.stream.out|_ThreadID=24;|
com.waveset.util.WavesetException: Constructor threw an exception.
==> java.lang.reflect.InvocationTargetException:
==> Missing required argument "operator". |#]
Thanks,
David

If thjis is a reproducible problem log a support case with the traces and have them figure it out for you.
WilfredS

Problem with exchange syncing and calendar

Hi,
I found a bug on the iphone (2.0.2)
When I create a rendez-vous in calendar and I add a note on several lines
example :
Mr Doe
Phone : 00000000
This contact won't synchronize with the exchange server (mail2web), if I create the same appointment on my mac (entourage) it will sync normally.
If I create the same appointment with calendar (on the iphone) and do'nt write the note on several lines, example :
Mr Doe, Phone : 000000
It will sync normally.
Someone else also has this problem ?
Message was edited by: bobby001

I also experianced this problem after an upgrade to Mountain Lion.
I think it has to do with the fact that in Lion the account settings were managed from iCal, and now they are managed by the OS?
Anyway I finally solved it by:
Open Calendar (formerly iCal).
Go to the Calendar menu and select Preferences.
Select the Accounts tab.
Remove the Exchange server account which is giving you the error messages. This calendar will be removed from the Calendar app.
Go to System Preferences and click on the "Mail, Contacts & Calendars" pane, find your Exchange server account, and check the "Calendars & Reminders" option to re-enable your calendar.
Your Calendar should now sync properly.
I had to do this for all of the accounts I had set up in Calander, and haven't had any problems since.

Problem With Ford Sync and Lumia 920

I have a Ford Flex with Sync by Microsoft and the Nav screen. I was able to have Sync read incoming text messages and reply with short ones with my Samsung Focus. After pairing my Lumia 920 I no longer can do this. The message I get is that "Texting is not supported by this phone via Bluetooth". It seems like Nokia either forgot to add this feature or there is a bug in the phone.

jam3 wrote:
I have a 2010 Ford Fusion. My wife and I both have Lumina 920's. We have no trouble pairing the phones to and incoming calls work fine. When we try to make outgoing calls, SYNC puts us in Privacy mode automatically -- so we can't hear the phone ring or the party we are calling answer. We can take the phone out of privacy mode by touching the Privacy mode on the SYNC screen -- but we shouldn't have to.
Does anyone have any suggestions as to how we fix this problem. We try a master reset on the SYNC system and a soft reset on the phone.
Same issue here (and same vehicle, except 2012), it is very annoying. My 900 I had before and One X+ do not have this issue. My first 920 had the camera die, so I replaced it. This issue was present on both phones. This has just been tested and is still and issue after all of the latest updates from MS and Nokia.
So, 93tid, why don't you STFU with your all-knowing air about what is and is NOT fixed!
Moderator's Notes: This post was edited as some parts were offensive to other users of the forum. We do not allow offensive posts here in our forum.

I have a problem with the sync and new applications.why???

when choose some new applications i couldnt download on my iphone.
it stop at de 3 step of sync
the new applications are bbc news, some roman games, le diplomatique news, and only a few more
why?
some are charged, i have to ask my money back.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problem With Audio Syncing

Whenever to try to set my audio in properties from "event" to something else (stream) the options are greyed out.

How do I take it off HTML5 then? I will only be exporting all my animations as movies.

Itunes has detected a problem w/audio config and may not operate

any thoughts on this subject? my itunes song comes up on screen from playlist but will not play
i really need help with support but cannot figure out how to email support
l. my itunes on my pc does not play....the song comes up but when clicking the arrow to play nor file play it does not go
2. when opening itunes, it says no audio device detected and itunes may not operate
3. it also says detecting a problem with audio configuaration and audio may not operate
3. i also have a corrupt file which appears to be a song and it says to check disk utility but do not know how to do so
please email back

For the audio configuration, try playing the song in Windows Media Player and see if you get the same message. If that's the case, you need to contact your computer manufacturer and get the audio drivers for your computer. For the corrupt file on your computer, and it says to run Check Disk, when you restart your computer, it will automatically run the check disk. Allow it to run and it should repair or delete the corrupt files in your computer. Make sure that you have anti-virus or spyware programs on your computer so you won't get corrupt files again. I hope this helps.
Jess

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Satellite Pro C650D - Problems with audio and game controllers

Hi,
I have recently had problems with my microphone and speakers/headphones as well as game controllers.
The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
The speakers are sometimes still working when I plug in headphones.
Some of the sounds are still coming through the speakers where as some coming through the headphones.
I have a usb game controller which also did not work any more properly.
If I assign the buttons in the program they do not work in the game.
All these device are in the device manager in one group which makes me think that it is some kind of dodgy annoying update that messes around with them.
Does any body have similar problems or know what to do best?
Cheers
Laurin

Hi
Can you please post some details about the notebook model and the system you are using?
Regarding the sound/mic issue:
>The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
Are you talking about internal or external mic? Does this happen only using Skype?
In your case I would test the mic using different applications to ensure that this is not a Skype related issue.
>The speakers are sometimes still working when I plug in headphones.
I recommend checking this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65295
The user has had an similar issue but this was related to settings in Realtek HD Audio Manger.
Her wrote:
+In the top right corner, there's a little yellow folder called "Connector Settings" in my version.+
+There, I could finally reactivate the setting "Enable pop-up dialog, when device is plugged in".+
+So now when I plug in an external speaker or headphones, it pops up and I select the option "headphone" (instead of "line-in"), and then the sound comes out only through the headphones/ext.speaker.+
Regarding the game controller:
>I have a usb game controller which also did not work any more properly.
>If I assign the buttons in the program they do not work in the game.
I dont think its notebook problem in my opinion you should ensure that the controller is compatible with games you are playing and would also recommend checking some info providing by manufacturer of the game controller.

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

Audio latency problem with VST, SONAR and Audigy 4 PRO

Hello all,
I have a slight problem with audio performance on my computer and I can't isolate what is wrong. I am using Cakewalk SONAR 4 studio edition, and a recently purchased Audigy 4 Pro soundcard. ( I know it's not quite professional grade, but it works well for me) I recently bought some string instruments from the Vienna Symphonic Library. So far, I love the sound of these "virtual instruments" if you will. The problem comes when I try to record them. I get stuttering and dropouts when I try to record the track in Sonar. I've tried the WDM drivers in 16 and 24 bit modes and the ASIO drivers (which apparently only support 16 bit!?) I know Creative has mentioned that these cards can record easily at 24/96 which is what I'd like if possible. Vienna instruments come in a 24 bit format. Is there something I'm doing wrong or do I need to seriously consider a different soundcard? I use Sonar to bring in the Vienna instruments as a VST. I also apply a reverb on it. When I just play this stuff on my MIDI keyboard, it all sounds great and keeps up. The moment I go to record though, I get dropouts after about 15 seconds or so. Also, is there no way to get ASIO 24 bit support for creative's consumer level cards? I'd be happy with the WDM's personally if those would work. I've looked into the KX project as well but haven't had a chance to try their drivers yet. On a different note, what are the significant differences between ASIO and WDM if any at all? (aside from supported bit rates) My current computer setup is quite powerful and I don't use much CPU power at all so I don't think it's my setup. Intel E6700 (2.67Ghz) Core 2 Duo, 2GB DDR2-800, 320GB Seagate SATA in RAID 1, Nvidia 7600GT, and Creative Audigy 4 Pro. Any help, or insight would be greatly appreciated!
Matthew

Audigy 4 Pro should support 24-bit/96 kHz w/ ASIO --> have you selected those I/O drivers in Sonar audio settings (Options-Audio-Drivers -tab). ! You need to unselect all I/O drivers first to get those 24/96 drivers selectable)?
Dropouts comes from various sources. Have you checked if the read/write caching is set properly (Sonar, try different settings)?
Stuttering may come from shared IRQ/resources and PCI Latency settings.
If your graphics card is not PCIe then, make this registry tweak
Run regedit and search the key named as DisableProgPCILatency
- set all 'DisableProgPCILatency' key values to 1 (HEX or DEC) (1 = disabled, 0 = enabled)
- boot to BIOS settings and find the "PCI latency timer" option --> set its value to 32 or 64 (this is global PCI latency setting)
- reboot
and check the IRQ situation. If there are IRQ shares between Audigy and other devices/controllers, try to get those fixed by disabling unneeded controllers/devices or by moving the Audigy into another PCI slot (PCI slots #3 and #4 are normally not shared).
Couple meaninful differences between WDM/KS and ASIO are;
- you can't get latency lower than 10 ms w/ WDM/KS (well, you can in Sonar by manually editing those buffer values but, the result is not good when you go under 10 ms buffer values (buffersize / samplerate * 1000 = latency in ms --> 512/96000*1000=5.33ms)
and
- you can record from one stereo (you can split this to two mono) source at a time w/ WDM (recording source is set in CT Surround Mixer (or windows recording controls))
- ASIO supports (Audigy serie) locked 'resolutions' only - 16/48 or 24/96
Also, tweak your system for music - http://www.musicxp.net/
Some information on CT ASIO -
http://forums.creative.com/creativel...essage.id=1726
jutapa
Message Edited by jutapa on 12-17-200606:01 PM

I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

Tried both methods you have mentioned previous many times without success - to answer your questions
What exactly happens when you try to sync?
Nothing is copied
Does iTunes see the iPod?
Yes
Was the iPod previous synced to another iTunes library/computer?
No
Have you successfully synced from this iTunes library/computer before?
Yes - just once when I first got it
If so have you done anything like update iTunes on the computer since it last successfully synced?
Yes computer os has been updated, I think
Do the songs play in iTunes?
Yes, on my computer and on my ipad and phone
Does any media now sync to the iPod?
Yes, synced my iPhone first, this morning
Do you have the right boxes checked to sync?
Tried every combination imaginable, including the settings that I had when syncing my iPhone this morning.
Hope this helps - it's a real pain.

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

Problems with Audio Sync and Rendering

Similar Messages

Maybe you are looking for