Problems with Audition 3.01

I just upgraded to Audition 3 from Audition 1. So far I have had just problems:
1) I have to activate Audition every day. That is - not every time I start it, but every day.
2) I have set the program to auto-scroll during playback and recording. It doesn't scroll during recording, and often not during playback. It is also reacting a bit slow. The playback cursor often stops, or disappears after a few seconds.
3) Playback or recording stops if I click on a background program, like the mixer.
4) The program crashes every time if I try to use the noise reduction effect. After capturing the noise profile the program crash almost immediately, every time.
I hope someone can help me sort this out. My system is:
AMD Athlon 64 X2 Dual Core processor 3800+ 2.01 GHz, 2 GB RAM. Windows XP Professional with service pack 3. I have optimized the machine according to the tips found on the Adobe site. I have installed the 3.01 patch.

Hi,
For the auto-scroll and other display issues, AMD released a CPU optimizer update that may help address some of these issues. It's available at: http://support.amd.com/us/Pages/dynamicDetails.aspx?ListID=c5cd2c08-1432-4756-aafa-4d9dc64 6342f&ItemID=153
That doesn't matter much, however, if you have to activate every day and if it crashes when using noise reduction. Activation resets each DAY? That's a new one. Are you running any sort of daily task that backs up or restores your hard drive or registry? I imagine it's unlikely that the licensing is actually de-activating or you would quickly run into the activation limits, but perhaps there is a bit or registry entry somewhere that is getting reset that makes the application believe it need to activate when the relevant activation data is already in place.
If you're comfortable using Windows Registry Editor, could you launch it via Start > Run > regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{53C141BA-4F9E-43F B-B4F9-0c01BB716FA8} Then click File > Export and save that block to a file and send it to me at [email protected]
If you could also launch Audition, click Help > About Adobe Audition > System Info and attach the info.txt file it creates, it might give me more information to determine the nature of what's wrong.
As for the Noise Reduction crash, does it only happen when capturing a profile? If you just run Noise Reduction without capturing a profile, do you see a crash? Do you see crashes with any other effects in this manner?
Thanks,
Durin
Adobe Audition

Similar Messages

Steps to troubleshoot and get past common problems with Audition

When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
     This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
     Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
     Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
     Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
     Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
          * "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
          ** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
     To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
     Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
     OS X: launch /Applications/Utilities/Console.app   Clear the view, then launch Audition and note any error messages that appear.
     Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
     If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
     So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

Oxc000007b problem with audition cc download-any ideas?

Hi, had the same problem when downloading Lightroom 5 from the creative cloud desktop - dll package for lightroom solved the problem here.
I am on Windows 7 Ultimate 64 bit.
(I uninstalled audition cc and installed it again with the same result)
Thanks for your help
Best Bee

SteveG, thanks for the link again. I tried before to extract both (msvcr80.dll and msvcr100.dll) to audition cc like I did with the lightroom 5 problem and I failed.
This time I only extracted msvcr100.dll to audition cc and it worked!
Thanks for your encouragement . . .
Best, Bee
Date: Sat, 8 Feb 2014 15:58:27 -0800
From: [email protected]
To: [email protected]
Subject: Oxc000007b problem with audition cc download-any ideas?
    Re: Oxc000007b problem with audition cc download-any ideas?
    created by SteveG(AudioMasters) in Audition CS5.5, CS6 & CC - View the full discussion
Well it's those .dlls that are the only reason that I'm aware of for this failing. Can I suggest downloading and installing them again? I presume that it's the information in this thread that you are referring to?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6101356#6101356
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6101356#6101356
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6101356#6101356. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Audition CS5.5, CS6 & CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with auditioning samples in Ultrabeat?

Im having some trouble with auditioning drum hits in Ultrabeat. When I go to listen a sample, the sample plays but all i can hear is a high pitched squeak instead of the drum hit I want to audition. Can anyone explain this?

Hi,
Ultrabeat is not so much a sample player, but more a synthesizer. Your squeek probably has to do with the synth parameters of that sound in UB.
This guy (David Earl aka SFLogicNinja) explains it well:
http://nl.youtube.com/watch?v=KElps7_rIZM
http://nl.youtube.com/watch?v=-RApWl2HgEU
regards, Erik.

A possible solution to the MIDI problem with Audition 5.5

Hi, all.
In searching for other answers to my Audition 5.5 questions, I've been seeing lots of complaints on these forums about the lack of MIDI compatibility with this version. If you have an external MIDI sequencer, I offer a solution that you might find useful.
Go into Audition's Edit > Preferences and change the time display from minutes and seconds to bars and beats
Specify the time signature to the closest beat value of your song (exampe: if you're using both 3/4 and 4/4 time signatures, go with 4/4)
Set the tempo to match your song
Lay down a full length click track with at least a 4 measure click intro
Insert the same length click intro into every track (which, when working with previously sequenced tracks, is just a matter starting the machine in sequence-record mode with the metronome on, counting the appriopriate beats and turning it back off just before the song starts)
Mute all but the track you intend to record
Record each instrument track to its own file, save and open a multi-track session
Position the first beat of the click track far enough into the session to preclude needing to trim intros (you can trim the silence out with the click intro after mixdown)
Zoom in until a single click fits perfectly under the time indicator line
Drag or snap all the other tracks underneath it so that the first click of each track lines up
I use lots of instruments with slow attack (such as strings), or tracks where the instrument might only be in a few measures, so the 4+ measures of click intro are particularly useful.
Pretty low-tech, but quick and painless nonetheless. It suits my purposes, though I'd love to know if someone has a better method. Thanks for reading.
Sue

Bob Howes wrote:
The other problem is that, even among the "music creation" market, there can be big differences in the perceived importance of MIDI.
I'm not a musician myself but have worked closely with two very different composers. One of them does practically everything in MIDI (using Sonar) then tends to hand me the files to work with in Audition (after conversion to wave format). Some tracks are left in the form they came but others are replaced with live "real" instruments.
The other person is much more traditional. He plays more instruments than I can count and I help him by recording as he lays down drums, guitars, bass, brass, etc. etc. He owns a lot of keyboards but, even with these, he sends me line out and uses the actual keyboard sounds rather than laying down MIDI data.
So, if you asked these two how important it would be to have MIDI functionality, you'd get two very different answers. From some of the recording forums I frequent, I get the impression that my friends are a microcosm of the whole market . Some use MIDI a lot while others prefer the feel and sound of recording live instruments. (And, I'm sure, others inhabit a middle ground.)
True dat. Up until about a year or so ago, I didn't use MIDI, and so Audition was for me music production software par excellence. Then about a year ago, I started getting into MIDI, and now I'm not only using MIDI for creating keyboard-based tracks for overdubs, I'm actually writing songs using MIDI (whereas before songwriting almost always involved a guitar). MIDI has become huge for me, in other words. And whether I go to sites like Studio Central and read Tweakhead's guide to homerecording in which he tells people that modern music-making either involves MIDI or is MIDI-based, or whether I read articles in Sound on Sound magazine which constantly reference MIDI in their articles, have regular features about sample librairies that use MIDI, or look at the countless ads touting MIDI keyboards and controllers, it's clear that MIDI is as much a part of modern recording as guitars and mics. Before, I never used to get what Steve was on about when he'd say that Audition isn't music production software, because I had produced five albums of stuff using either CEP or Audition. Now, I understand what he means when he says that. When he says Audition isn't a music production software, he means 'Audition doesn't have MIDI'. However, the truth of the matter is that Audition is a wonderful music production software if you don't use MIDI, and a partial music production software if you do. You know, I've tried out other softwares - Reaper, Studio One, FL Studio (ha!) - and none of them come close to Audition for me. Sure, I can get by using Reaper for MIDI, but knowing how Audition does things, I know that I'd be happier doing it inside Audition. Hence, the continued lobbying. I want the best.

Mac newbie! Recording problems with Audition 2.0 in WMware Fusion 3.0

Hi --
Having been an Audition/Cool Edit fan for a decade, when I recently bought my first Mac (MacBook Pro) I bought and installed WMware Fusion 3.0 for the sole purpose of running Audition on my Mac (OS 10.6.2).
Everything installed beautifully and playback, CD extraction and the like all were working fine. There was a slight bit of latency, but I could deal with it. When it came time to record something, though, it was awful. The whole Auditon program slowed down and recording was spotty, choppy and basically unintelliglble.
I thought I hadn't allocated enough memory on my virtual machine (the default was 512Mb) so I increased it to 2GB. That didn't work.
Has anyone else experienced this and, if so, can you give me a tip or two on how to get the recording mechanism to work properly?
Thanks!
Andre

VMWare Fusion and Parallels are just not reliable enough for real-time recording. I highly recommend setting up a bootcamp partition and using Audition under a native Windows XP environment for recording. The virtualization systems work fine for editing, mixing, etc but are just not reliable or robust enough for real-time work, in my opinion.
I supplied a short blog post to Adobe's Inside Sound blog last year about this. It's still up at http://blogs.adobe.com/insidesound/2008/02/audition_3_on_a_mac_1.html and has generated some great comments from users and even some of the folks over at VMWare.

Strange problem with Audition 3.0 - Tracks Load, but don't appear, no tracks listed?

I've a collection of 15 songs I've been working on.
A few weeks ago, I loaded one of the sessions, only to find that the progress bar showed the loading of each track as normal, but there was no track data visible once the session opened!
Fortunately, I kept a back up, and transferred this over. However, now the backup has done the same thing, and I've done work on it since and don't want to have to go back to the old back up again.
What's weird is that, the files are all there listed in the directory, and appear to load, the session attributes and settings are all the same, but just no audio tracks are visible.
I'm sure there must be a way of recovering this, but I don't know what it is.
I've deleted the cache, which didn't help. I've copied the directory somewhere else, and back over again. - but no luck.
Any ideas?
Pic 1 and 2 show the loading process (i.e. it's definately loading something from somewhere)
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/1.jpg
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/2.jpg
Pic 3 shows, the session, with nothing in it!
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/3.jpg
Pic 4 shows how the session should look, and 5 shows where all the files are.
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/4.jpg
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/5.jpg
Please help me solve this, this project is so close to finishing and this problem is really annoying me.

Still haven't solved this, even the backup no longer works...Would anyone be interested in helping me by letting me send them a project, making one simple change for me, then saving the project, returning it to me and exporting it as wav?
this would help me tremendously...
let
me
know
if
u
can
help
anyone be interested in helping Mr

Audition problems with Premiere CS5

Has anyone had problems with Audition 5.5 not functioning with Premiere CS5. I have both programs (but not a part of the Suite). So, Audition CS5 is installed and so is Premiere CS5. After separating a sound channel, I want to pick the Edit with Audition from the drop down but the Edit with Audition is muted; interesting however is the Edit with Soundbooth is highlighted and it works. But I would like to work with Audition instead. Anyone have those sorts of problems?

This built-in functionality works only with Premiere CS5.5, I believe. There may be some registry hacks or something to make it work a little with Premiere CS5.0, but I have a feeling the only way to successfully fly stuff back and forth as intended is to get the upgrade.
Now, if that's actually what you have, and this is happening, then that's a different problem altogether.

Baffling recording problem in Audition 3.0, please help!

i have this totally silly problem with audition 3.0, which until today was working fine.
the problem is simple but infuriating. i open a session, load a music track into track 1 and attempt to record my voice on track 2.
audition records, on track 2, the output from track 1 as well!
this problem started after i installed two pieces of software on the computer: van basco's karaoke player and audacity.
i've uninstalled these two programmes, restarted the computer, uninstalled and reinstalled audition (twice!) but nothing seems to work.
does anybody have any ideas?
thanks in advance
a late news flash. i haven't actually cracked it, but i've found a way round it that works: i add a bus track and send the output of track 1 to that bus track. that way the track 1 content doesn't get recorded on to track 2. a bit heath robinson though!

since i've now, thanks to ryclark, totally cracked this problem i think i can help!
probably you need to alter not your sound card setting but your windows mixer settings (i assume you're using windows). you can do this easily from outside audition (even with audition not open).
open the windows volume master (double click on the little speaker icon), in its control bar click "options" then select "properties". click on "recording", click on ok, then in the volume control panel that opens select only the microphone (or whatever you're using for your mike input) and disactivate everything else.
you should now be able to record in audition only what comes in through the mike.
hope this helps.

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

Audition problems with ASI5211 analog pair & AES stereo in at same time ...

That is, the Audio Science ASI5211 card is advertised as essentially a 4 mono channel input card, 2 of which are analog and 2 are digital. However, I haven't been able to get Audition (CS5.5 or CS6) to recognize this capability. The ASIO/MME/WDM driver sets supplied by Audio Science (so far, versions 4.10.7 through 4.10.20) and its associated desktop driver control panel seem to show this ability as 2 separate stereo audio streams that can be set to pass either of the physical stereo input sources (Analog & AES). I select one stream as analog and the other as AES, but I can't seem to map these streams/inputs discretely inside Audition in the "Multitrack" view to 4 different channels.
If I use the ASIO driver class in Audition, I'm only shown a single "Default Input" stream (# 1) and can select among either the left or right physical input to map to the left or right stereo Audition channel. This appears to be the limit of my choices in the "Multitrack" input select view as well.
If I use the MME (WDM) driver class, I can select between the 2 streams (#1 and #2) as "Default Input" but again, whichever "stream" is selected, that's the only choice I get in the "Multitrack" input select view ...
I also have another instance of Audition that is running on a pair of ASI5644 cards (4 stereo record streams per card) and the ASIO driver class, that I don't seem to have this kind of problem with.
The Audio Science drivers are a "monlithic" kinda deal in that the one package is intended for most (if not all) of their product.
Any ideas?
Dell Optiplex 780
WIN7 64bit Enterprise
Audio Science ASI5211
I hope this is at least somewhat clear.
Thanks in advance for your time and attention.
-Tim

tgmartin wrote:
Steve,
Thanks for the response. I was able to get an answer about this from Audio Science and it appears that, like a number of things, this capability of deriving 4 discrete "mono" channels (2 Analog + 2 AES) from the ASI5211 card *WAS* possible in Audition v3 using Windows drivers, but it was amputated from subsequent versions of Audition.
What I was told was that the absence of this ability, using the current ASIO driver, is somehow due to the hardware architecture of the card. Not much more was revealed.
Nothing at all was removed from Audition's ability to pick up and send correctly formatted ASIO streams - otherwise just about every other user would have screamed from the rooftops, and it would have easily been picked up in beta testing.
Reading between the lines, I'd say that they were being 'economical' with the truth here. What it amounts to is that they've screwed up their ASIO driver - period.

Problem with Adobe Audition CC(2014) / Install

Hello,
I have a problem with my subscription to Adobe Audition CC. I paid a monthly subscription to adobe audition CC and now, when I want to use it, the program wants a serial number. I don't have any serial key. I've just my mail subscription confirmation. When I go to Creative Cloud, it notices that my application is install but I can't access to it. What can I do?
Thank you. @

Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Problem with Inventory stock audit Report in other currency

Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

Alberto,
Other currency information is available at the document row level and in the Journal Entries.
What you could do is join the OINM with the associated document and let the foriegn currency value.
OINM.TransType = ObjType (marketing document)
OINM.BASE_REF .......Document Ref
OINM.DocLineNum ......LineNum
Suda

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

Problem with Adobe Audition

I would like to ask for help. I downloaded Adobe Audition. I instaled it without problems but than, when I wanted to open the program, it gave me this: "Please sign in with your Adobe ID to use your trial of Adobe.." bud when I give "Sign in" it will say me than I have the problem with Internet conexion (I´m certain than my internet works) but I have a filter against the sites like terrents and differents - can be the problem in this filter?

Could be the issue with the Filter but hard to say.
Follow the suggestion in the link below as it may help :-
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Problems with Audition 3.01

Similar Messages

Maybe you are looking for