Problems with authorization in iTunes 7

I updated to iTunes 7 and the first time I connected my iPod there were 90 songs which I have legally downloaded from iTunes which it says I do not have authorization to copy from my computer onto the iPod. Very irritating! All my other downlaods are fine. Any ideas please?

I had the same problem, but was able to solve it. See my notes here:
http://discussions.apple.com/message.jspa?messageID=3495571#3495571
You need to replace a copy of a file that iTunes creates - it's a 30-second fix (and works perfectly) - with the caveat that you must have a good backup.

Similar Messages

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

    When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

    ptford wrote:
    When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
    Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

  • HT204370 I downloaded an HD movie onto my laptop from i-tunes.  It plays fine on my laptop, but when I plug in my HD projector, the movie quits.  When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

    I downloaded an HD movie onto my laptop from i-tunes.  It plays fine on my laptop, but when I plug in my HD projector, the movie quits.  When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected.  We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future. 

    I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
    The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

  • I have problem with buying from iTunes Store

    I have problem with buying from iTunes ??!!
    I've put all of my info cards
    What can i do ?!

    Are you trying to spam the forum with 6 the same posts?
    Please give more details of your problem and answer the question below:
    Is the app available in your country?
    Are you using the App Store for your country?

  • Has anyone with the iPhone had a problem with 7.3 itunes?

    I'm curious to know if people who bought the iphones have had the same problems with 7.3 itunes that seems so prevalent on the discussion board (like getting the error message in saving the library file, or frequent crashes).
    I'd love to know, because if not, then it seems as if 7.3 is designed specifically for the iPhone (supposedly the iPhones only works with 7.3), and that may be why the rest of us non-iphone consumers are having a miserable time with the upgrade.
    Can you iphone people let us know?
    thanks.

    I have an iPhone and since I've upgraded to 7.3, iTunes constantly stops responding and I've had to force quit. I've reinstalled iTunes countless times and deleted the iTunes preferences in my library file and while this works for 1 or 2 times, it soon does it all over again. Help!

  • I have problem with the newest itunes. i can't add lyric to my ipod through itunes. anyone know how to fix this?

    i have problem with the newest itunes. i can't add lyric to my ipod through itunes. anyone know how to fix this?

    On the iPod in Settings>Music do you have Lyrics and Podcast info ON

  • I have problems with restore in Itunes with eror  1418 and i cant put the song in my shuffle ..

    I have problems with restore in Itunes with eror  1418 and i cant put the song in my shuffle ..

    http://support.apple.com/kb/TS1372

  • Problem with authorize my computer

    Hi I am having problems with the authorization of my computer every time I go to "shop" "authorize computer"and the itunes asks me apple ID and password and I type it and later itunes says that this computer is Allow 1 of 5
    but when I go through my applications that I bought in itunes store the itunes says tah my computer is not authorized...
    What can I do to pass applicatives to my iPhone?

    I'm also having the same problem. They started after I replaced a hard disk.
    i-tunes wants authorization and gets...tells me the computer is already authorized and refuses to recognize the phone. If I run the sync it cleans out all of the apps from the phone and wont send any to the phone.

  • Problem with Authorization for Planning folder

    Hi an having a problem with providing authorization for a planning folder
    i am getting the following error when i test it with test user
    Error while calling up RFC
    Message no. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "You do not have authorization for InfoCube ZT_MR_T "
    Procedure
    Inform the system administrator.
    we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
    Regards,
    Abraham

    Calling Thru Trans code: BPS0 in ECC 6
    getting this error:
    Error while calling up RFC
    Message No. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "An error occurred during the receipt of a complex parameter."
    after i check in bw trans code:st22
    Following this error message:
    Category                   Internal Kernel Error
    Runtime Errors         PARAMETER_CONVERSION_ERROR
    Application Component  BC-MID-RFC
    Short text
        An error occurred during the receipt of a complex parameter.
    What happened?
        During a remote function call, an error occurred while converting
        a complex parameter.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
    Error analysis
        An error occurred during the conversion of a complex parameter.

  • Problem with Authorization for BW BPS planning Folder

    Hi an having a problem with providing authorization for a planning folder
    i am getting the following error when i test it with test user
    Error while calling up RFC
    Message no. UPC202
    Diagnosis
    You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
    "You do not have authorization for InfoCube ZT_MR_T "
    Procedure
    Inform the system administrator.
    if any one has faced the same issue let me know.
    Regards,
    Abraham

    HI ,
    I Checked it out we dont have that cube in our system.
    Regards,
    Abraham

  • Problem with artwork in iTunes 7

    Since i got iTunes 7 a strange error started in my ipod video 60gb(fully updated):
    First, the ipod was not showing any artwork. Then i tried to uncheck the "display artwork" field, and press apply. Then check the field againd, and press apply again. It started to optimize my artwork, but by the middle of the process, this error happened: "The ipod "Flavio" cannot be updated. An unknown error occurred
    (-50).". I started searching in the internet what could this error be, and found that it is a communication problem, or something like that, but could be caused by bad (corrupted maybe) pictures, photos or artwork. I erased them all (even all the artwork) and tried the uncheck-check process again, and the same error happened. I read that it could be lack of space in my computer, but right now there are 6.6gb of free space in my c: (is it enough?) and the error still happens.
    Today i plugged my ipod on a computer with iTunes 6, tried the uncheck-check process again, and surprise, it worked! Unplugged the ipod, tried playing the only song with artwork remaining, and it worked too! So i came back home and tried again with itunes 7, but the error happened again, tried the song and the artwork wasn't showing again... Ok, so i tried with a laptop, itunes 6, and it worked perfectly again, then i thought "The problem can be happening just on my computer". Updated the laptop itunes, tried unchecking-checking again, and it seemed to work, no errors, but when i played the song on ipod, the artwork was gone again! Just like when the error happened... Tried again, no errors, no artwork, tried back on my computer, error, no artwork.
    2 itunes 6 -> worked, 2 itunes 7 -> problems. The only possible conclusion is that there is a bug in this new itunes, or a new way of dealing with artwork (by itunes, not by the users). Am i right? Or can anyone help me?
    I was thinking about restoring, but as i am adding everything by hand, nothing automatic, it could take a lot of time to choose everything again, and to make all the playlists again... And after seeing that this could be a bug, and could happen again, i decided to post everything here before restoring, to see if there is a better solution.
    Thank you for helping! (or at least for reading this huge post, and sorry for my bad english...)
    Flavio

    there is some problem with i tunes 7(the7.0.1 patch also) in that any artwork found by i tunes is visible whilst viewing tracks in your library if you transfer said tracks to your ipod then the artwork is not transferred,also it you use album artwork as your screensaver then artwork found by i tunes is not used. i can only think that something is not beeing written to the id tags of the tracks. any artwork found by yourself and dragged into the relevant box on the track or album information screen(called up by apple+i)is seen on itunes and by the screensaver. i have spoken to apple support and they assured me that they would get back to me as they had to investigate.that was a month ago. if the problem really bugs you then you can drag artwork found by itunes onto your desktop and then back into the tracks id screen. this remedys the problem but is tedious to say the least. hope this helps

  • Problem with Toolbar in Itunes 9.0.3

    I upgraded to 9.0.3 and now my itunes toolbar will not work. This happened in 9.0.2 also. Is there a fix or should i just go back to 9.0.1 until they update again.

    I've had this problem as well, the solution from the AXIS mail lists shows that it seems to be a problem with the xmlparserv2.jar that is supplied with IAS. Xerces does not produce this problem, the solution is simple but annoying.
    Save the auto generated WSDL and then add the following to the wsdl:definitions line of your WSDL document, and then deploy this WSDL document with your application.
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    Then in your server-config.wsdd file, reference the supplied WSDL with the following tag in your service descriptor.
    <wsdlFile>/<path-to-wsdl>/myService.wsdl</wsdlFile>
    Then everything should work perfectly, the AxisServlet will display your supplied WSDL rather than generate it dynamically when the ?WSDL parameter is specified.
    Andy.

  • Is there a problem with the latest iTunes update?

    After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it doesn't happen on my other computer with an older version of iTunes. I've gone through the troubleshooting suggestions for this on the Apple site but nothing seems to work. Is there a problem with the new update? And will it be getting fixed soon?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Sync problems with iPhoto (Last iTunes & iPhoto & iOS)

         Some people have problems to with the music sync but anyone has the same problem but with the photos? iTunes doesn´t count the number of photos that suposse to be listed when you select your album on itunes/device/photos... I have once the problem with the music but it cames right after delete and resync my playlists.
         Thnks!
         Tested on iPhone 5 and iPad2 Mavericks iTunes 11.1.2 and iOS 7.0.3 Same problem with iPhoto 9.4.3 and 9.5."

    I have the same issue - iTunes 11.1.2, iOS 7.0.3, Mac OS X Mavericks, iMac 2011, iPhone 5S - Aperture 3.5 and iPhoto 9.5 - iTunes does not sync pictures (not even counts them) between my iPhone 5S and either one of the programs. When I select iPhoto, it even shows information of a library I am not opening with iPhoto anymore.
    I have resorted for the time being, waiting for a bug fix, to copy what I am interested in, into a folder and sync from it - that at least works.
    Moreover, contrary to what said here in other threads, I can Wi-fi sync my iPhone 5S and iPad 2 to iTunes 11.1.2.
    And, about all the complaints of iTunes not showing the "Info" tab anymore, Mac OS X now supports natively more types of accounts (Gmail, Yahoo, Twitter, Facebook, AOL, etc.). Everything can still be also set up manually in any case - so I don't understand what everybody is bragging about - you can avoid using iCloud, if so one wishes.

Maybe you are looking for