Problems with auto commit

Hi All,
I am having some trouble with the auto commit. In the sql work sheet i update a table and then disconnect. It seems to be auto commiting the changes i made.
i went in and unchecked 'Save all when deactivating or Exiting'
Do i need to turn this auto commit off somehere else?
Would it be possible to get prompted to commit when you disconnect?
Thanks
Chris

Yeah. You are up to date. That bug must still exist. Hopefully someone from Oracle is monitoring the thread from OOW and can let you know the status on this. Optionally, you can open a tar (or equiv support request) directly with Oracle.
Eric

Similar Messages

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Problems with auto-cap of I on ios6?

I upgraded my 4s to iOS6 and not my auto capitalization of "I" is not working. Anyone else have this problem or know how to fix it?

Yeah I tried making a shortcut to make i into I, but it has to be two characters. I guess I'll just go into the store tomorrow and see if anyone else has had problems with it with iOS6. I haven't heard that anyone has had any wonderful experiences with it yet

Problem with inverted commas in texts in WAD

Hi all,
I've a problem with description texts in WAD. In a graph where one of the columns have the description, let's say something like ' bla"bla ' (in Hebrew we've texts with inverted commas in the middle of the word) and when I point with my mouse on the point to see the value in numbers the text is cut. let's say 'bla"bla' had 15 value it wouldn't show it, but it would show 'bla'. if the text is ' bla ' with value 18, it shows ' bla 18' .
How can i solve it?
thank you,
Yoav.

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

URGENT! Problems with On-Commit and Key-Commit triggers!!

Hi there,
We are having a problem with our form actually saving a value to the database after the commit_form is given.
When we hit the Save Button (which triggers the Key-Commit, and that in turn triggers the On-Commit trigger) we want a populated global variable to save to the database. Now when we hit Save, we can see the field get populated properly with this Global Variable (Global.Last_Tckt_Read), BUT it doesn't save to the database.
Here is the code from the On-Commit trigger:
IF :cg$bf_meter.closing_ticket_issued = 'N'
THEN
:CG$bf_meter.opening_meter_reading := :GLOBAL.LAST_TCKT_READ;
:CG$bf_meter.opening_meter_reading_date := :GLOBAL.LAST_TCKT_DATE;
:CG$bf_meter.closing_meter_reading_date := :CG$bf_meter.last_ticket_date;
:GLOBAL.PREV_METER_READING := :CG$BF_METER.LAST_TICKET_READING;
:GLOBAL.WINDOW_ACTIVE_CHECK := 'true';
:GLOBAL.FTDAYCHM_SAVED := 'true';
commit_form;
ELSE
:GLOBAL.PREV_METER_READING := :CG$BF_METER.LAST_TICKET_READING;
:GLOBAL.WINDOW_ACTIVE_CHECK := 'true';
:GLOBAL.FTDAYCHM_SAVED := 'true';
commit_form;
END IF;
The code in the Key-Commit trigger is just commit_form;. Now, the code from the On-Commit seems to work fine if its in the Key-Commit trigger -- BUT we need to use the On-Commit in case the user exits the Form with the Exit Button on the toolbar or "X" on the title bar (Neither the Exit Button and the "X" will call the Key-Commit trigger).
Any ideas how we can get this data value to actually SAVE in the database??
Thanks for any help -- please respond, this deadline has already passed!
Mike

Well, I can't say I understand what you want, but:
1) if you have only commit_form in key-commit - then you do not need this trigger. key-commit will fire when F10 (commit) is pressed, but since it is doing the same - there is no need.
2) why don't you populate your block values to be saved right in SAVE button trigger and issue commit_form in the same trigger?
Then you can have key-commit to cover the same functionality for F10 with code:
go_item('save');
execute_trigger('when-button-pressed');
3) I cannot get the point of the "close" stuff - on close you want to check for changes or not? and to allow the user to exit with or without saving?

AQDriverManager.createAQSession take Conn with auto commit?

In Oracle Advanced Queueing, can the connection passed to AQDriverManager.createAQSession be set to auto commit? I notice all of the examples in the Oracle documentation have auto commit turned off for the connection.
I've tried it with an auto commit connection and it seems to work, but not sure if this is really supported.

Can someone answer this?
null

Problems with auto-enroll with the certificate expiration

Hello,
we have routers that work with certificates. We have problems with the auto-enroll when the certificates go to expire.
?Can somebody help?
I can send mor debug o configurations.
We attach a debug.
Very thanks

Hello,
I attach the debug.
Very thanks

Problems with Auto approval workflow (WS 10000060) for shopping carts

Hi SAP Network community,
I have got a problem with the auto approval workflow for shopping carts.
Basically the workflow approves the shopping cart once it was created.
But then the related Purchase Order remains in Status held. If the PO gets ordered manually then it is not transferred to the R/3 backend system.
For testing purposes also the one step approval workflow was activated. If the shopping cart gets approved by clicking into the detail approval screen (not by approving through the green tick box in the shopping cart overview) then the PO gets ordered and transferred to the backend system as normal.
But if the shopping cart gets approved by using the green tick box in the shopping cart overview then the same problem occurs as described for the auto approval workflow.
The system version is SRM 4.00
Did anybody have the same or similar problems with the auto approval workflow and what could be the reason for this problems.
Thanks in advance,
Robert

Hi
Which SRM Workflow Scenario are you using (IS it Item level workflow or Shopping cart level Workflow) ?
Are you using customized SRM Business workflow or Standard SRM Workflow ?
<u>Please go through these links as well.</u>
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/eb/289f4099852e54e10000000a1550b0/frameset.htm
Incase you are using Standard SRM Workflow, please raise an Customer OSS message with SAP at the earliest.
Regards
- Atul

Aperture 3 : recurring quality problems with "auto levels"

Hello all,
I've been using Aperture 3 since the day of its release, and I have recurring problems with the quality of the "auto levels" output, compared to plain old Photoshop CS3. Auto-levels in Aperture 3 frequently output grainy results.
Here are some samples (look at the central vertical darker part of the image) :
— original image (well, part of it) shot using my Canon EOS 400D :
http://plainsong.online.fr/aperture/Original.jpg
— the same original image with "auto levels" applied in Photoshop CS3 :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop.jpg
— the same original image with "auto levels" applied in Aperture 3.0.1 :
http://plainsong.online.fr/aperture/Auto-levels-Aperture.jpg
And here are both "auto-levelled" images zoomed in for convenience's sake :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop-ZOOM.jpg
http://plainsong.online.fr/aperture/Auto-levels-Aperture-ZOOM.jpg
I would like to know if I'm the only one to get such crappy results in Aperture, on a not insignificant number of photos. These poor results are very visible in some photos. This is really irritating, because this lack of quality means I have to open those images in Photoshop just to apply auto-levels. And I thought Aperture would be smart enough to spare me those round-trips!
(By the way I've never had this kind of quality problems in Photoshop.)
Please share your experience. Thanks!

Here is another example :
http://plainsong.online.fr/aperture/Example2.jpg
Aperture auto-levels seem to choke on dark areas. Will we be obliged to bright and sunny shots ?

Problem with auto install of Photoshop CS4

Hello,
I'v a problem with the installation of Adobe Photoshop CS4 under Windows 7. It's working
with Windows XP. I've a Exit code: 7 (Unable to complete the silent workflow). I use the
command Setup.exe --mode=silent or Setup.exe --mode=silent --skipProcessCheck=1 or the same commande
with de response file but always the same error code.
Can you help me to resolve my problem ?
Best regards

You should probably go to the PS Windows forum with this question...

Problems with auto update

I just bought a new 60GB ipod video. When I connected to itunes on my pc, it started the automatic upload, but experienced an error after about 4,000 of the 6,000 songs in the library. It said "unknown error (Type 69)." After reading other posts, where people suggested reloading itunes, I tried the various remedies, but eventually returned the ipod to Best Buy and got a new one.
When I brought it home the new one did the same thing, at almost the exact same spot. I noticed that a few songs in my itunes could not find the files that went with them, so I tried to purge those files. When I reconnected the ipod, it synced another 200 songs and then experienced the error again.
So I know it isn't a problem with the ipod. Any ideas?

hi joshm!
just checking. have you seen this article yet? (it sounds like you've already tried a number of things from it, but i'll throw it in the mix, just in case.)
iTunes displays a -69 error when syncing iPod
love, b

I've been having a problem with auto-fill in the email on my ipod touch.

I have updated to new email addresses, or accidnetly typed in the wrong on, and now the email addresses won't go away, even though they're not in my contacts. So when i said for instance i want to send a message to [email protected] and it just changed to [email protected], the [email protected] keeps popping up even though i dont need it anymore and it has been removed from my contacts. I have also looked on the internet if any other people have had problems, and they all have had iOS4, and all of them have the same problems except for some, the copybot.com worked, but as well a couple said it did not. I really hope apple updates the software once again and removes the autofill from all email addresses.I have updated the iOS5.1 software, i have the 4th generation ipod touch, and yes i've tried to copybot.com and selected each previous sent email address one by one and restored it, but nothing changed and it wasn't fixed. I have also went into the settings and went to change the auto-correction tab, but that as well didn't work. I dont know if im the only one with this problem, but cant you please help:/ It really is a bother. Thanks(:

I know of no solution except for restorng the iPod to factory defaults/new iPod. Have you made a suggstion to Apple to all resetting email autofill?
Apple - iPod touch - Feedback

Problems with Auto Pay Activation

Three months ago, I spoke to a Verizon person (English speaking) and signed up for Auto Bill Pay and was told it could take two billing cycles to activate. Apparently, this has never happened because I received a third bill indicated I have a past due amount due immediately along with a fee. This is the second time it's happened. The last time, I was able to get the fee waived. What is the problem? I do what I can to make sure Verizon gets paid and on time through the use of their service and was told it was being processed. Instead, I had to take additional time out of my day to wait on hold, explain the situation to a customer service rep, beg for credit on fee, and get told it's fixed only to have the same thing happen again. Why is doing business with Verizon so difficult? I'm seriously frustrated. And please, if a Verizon rep is going to reply to this post, DO NOT tell me how you understand my frustration and how Verizon does it's best to service its customers as it comes off as disingenuous. Also, I can't find a way within my account to set this feature on or off. Anyone know where to go?

MichellL_VWZ:
"Please keep in mind when setting up auto pay it may take up to two bill cycle for auto pay to start. Manual payments must be made until auto pay starts taking payment automatically. "
How are you supposed to know when to pay yourself, and when Verizon will take payment automatically? I don't want to pay twice. I also signed up for auto pay so that Verizon _would_ pay automatically. I made my first payment myself, and then trusted that Verizon would do the 2nd one (more than a month later). Verizon didn't take autopay, even thought it said clearly on the autopay signup site that it would, and now I'm being charged the late fee!

Problems with auto commit

Similar Messages

Maybe you are looking for