Problems with autoextent on a 8.1.7.3 64bit installation

Hi,
two weeks ago I installed a 8.1.7.3 database with 4 tablespaces on a testbase,
two for the data, two for the indexes. The data-tablespaces and the index-tablespaces
were splittet to 4 datafiles. The datafiles of the data-tbs had a start size of
2000MB each, autoextent on and next extent of 500MB. The datafiles of the index-tbs
had a start size of 500 MB each, autoextent on and next of 500MB.
I had a look at the datafile parameters every file is set to autoextent, but the
autoextent doesn't work. I analysed this problem completly, everything is set up correct.
The only thing I noticed is that the data is loaded with sqlloader.
Could it be that this is known bug of this version or is this a well known problem?
Does someone of you have a tip for me what i can do?
Thank you for your help!
Tobias

Q -
1) What is the actual error you are getting ? cut paste error/alertlog/oserror.
2) Is the table running out of extents ? ( maxextents ???? )
3) Is your mount where all the datafiles are stored capable of handling files with 2GB+ ? ( see largefiles )
4) Is your sqlldr using "direct=yes" ? If so see the hwm of the tables as well as the tablespace.
5) Are the tables sized correctly ?
6) Are you truncating the tables before the load ? If so are u using drop storage clause ?
Too many questions - very little details about your problem.
Not to offend you ( apologies ) , but should help: http://www.tuxedo.org/~esr/faqs/smart-questions.html
HTH,
V
Hi,
two weeks ago I installed a 8.1.7.3 database with 4 tablespaces on a testbase,
two for the data, two for the indexes. The data-tablespaces and the index-tablespaces
were splittet to 4 datafiles. The datafiles of the data-tbs had a start size of
2000MB each, autoextent on and next extent of 500MB. The datafiles of the index-tbs
had a start size of 500 MB each, autoextent on and next of 500MB.
I had a look at the datafile parameters every file is set to autoextent, but the
autoextent doesn't work. I analysed this problem completly, everything is set up correct.
The only thing I noticed is that the data is loaded with sqlloader.
Could it be that this is known bug of this version or is this a well known problem?
Does someone of you have a tip for me what i can do?
Thank you for your help!
Tobias

Similar Messages

  • Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

    Hello All,
    I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer.  Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
    Thank you
    Roy B

    I have a similar problem with the J4580 and my new Windows 7 64-bit laptop.  HP Solution Center says that the printer is disconnected.  Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file.  The printer truncated the page after printing just the top 10%.   The printer is OK with my wife's Windows 7 32-bit laptop.
    I've seen many other people complain about similar problems in this and other forums.  Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit.  Can HP please provide an updated driver or patch?

  • Problem with Acrobat X Pro 10.1.1 update (multiple installs)

    I updated my Acrobat X Pro to version 10.1.1 when first notified of the update. Since then I have been constantly bombarded with new updates are ready to install from the auto update downloader. I was fooled the first time when it re-installed the 10.1.1 update. In all I've now installed this same update at least 4 times trying to get rid of the update messages, but I'm still getting bombared with them. Something is wrong with this last update. Has anyone else experienced this problem? Anyone know how to stop this insanity? When I manually check for updates in Acrobat, it also says there are updates available. Thanks.

    Are you sure that Updater is trying to update Acrobat? What is the title of the Updater dialog?
    Do you have Reader installed? There is an issue with Updater where on the systems with 2 Readers of the same major versions, User gets prompted to update again.
    If you have 10.0.x Reader and 10.1.x Reader, you might be it.
    The fix is to uninstall all Readers and install latest one - should take about 20 minutes.
    If that does not help, search Forums for AdobeARM.exe and how to enable verbose logging for updater, than check for updates and provide AdobeARM.log file - I'll try to see what is wrong.
    Good luck.

  • Problems with OLE DB Apshell requested by the login during installation.

    Hi gurus, I installed SAP BPC 7.5 for Microsoft i tried to following the steps like the manual say, when i was installing showed the next message:
    OLE DB error: OLE DB or  ODBC SAP BusinessObjets Planning and Consolidation "ApShell" requested by the login. The login failed; 4200.
    Error in the high-level relational engine. A connection could no be made to the data source with the DataSourceID of 'AppDef', Name of 'AppDef'.
    Errors in the OLAP storage engine: An error ocurred while the dimension, with the ID of 'ApShell', Name of 'C_ACCT' was begin processed.
    Server: The current operation was cancelled because another oparation in the transaction failed.
    well, this is the second time i installed SAP BPC 7.5 with the same error.
    For other side, when I trying to process one dimension show me the next message:
    - Errors in the metadata manager. The process type specified for the C_ACCT dimension is not valid since it is not processed.
    I think that the problems is the OLAP, something about security in SQL SERVER.
    I putting the list of component in my PC.
    1.I am using VM VsPhere
    2. Windows Server 2008 R2 Enterprise 64 bits
    3. SQL Server 2008 R2
    4. SAP BPC 7.5 for microsoft
    if someone can help me ?
    thanks in advance.
    Edited by: Alan Valenzuela on Aug 17, 2011 12:30 PM

    I believe, I have the answer, I followed this steps.
    I had the same issue. This sorted it for me:
    1. Open up SQL Management Studio
    2. Go to Security > Logins > NT AUTHORITY\LOCAL SERVICE
    3. Right click > Properties
    4. In the User Mapping section tick ApShell
    5. In the bottom section of the screen, tick db_datareader
    It's works.
    I have to say thanks to David Gilbertson
    I saw his answered in this link BPC 7.5. MS   cannot open databse "apShell"
    Edited by: Alan Valenzuela on Aug 18, 2011 10:14 AM

  • Is anyone else having problems with iTunes 11.3.1.2 for windows8 64bit? Whenever I start it up, it crashes immediately.

    I cannot run iTunes 11.3.1.2 and I cannot figure out how to reinstall the older version that it replaced. Any help?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Problem with Acrobat 8 Pro on a WIN 7 64bit system

    I have installed Acrobat 8 Pro and my Win 7 64bit machine and am having trouble printing web pages to pdf
    but can find no exact reason why the just hang in the spooler just saying they encountered an error.
    Any help with that?

    The updates may resolve the issue. To update you may have to go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ to get the updates and install them in order.

  • Portg R600-11B - Problems with switching displays

    Hi,
    I've a problem with a Portg R600-11B running Windows 7 64bit.
    The computer is nomally plugged in a docking station that is connected with a DVI monitor. Here I can select with <FN> + <F5> between the different display modi "internal" / "internal" + "DVI" / "DVI".
    When I unplug the computer from the docking station and connect it to a beamer via VGA I can't switch the display. I only get "internal". Only after a system-reboot <FN> + <F5> works with an external VGA monitor.
    When switching back to the docking station with the DVI monitor it's the same: I only get the internal display. Only after a system-reboot <FN> + <F5> works.
    What can I do? I have the latest Microsoft Updates for Windows and Office (2003) and the latest "Value added package" from the download page installed.
    Regards,
    Axel Martin

    Try updating:
    * BIOS
    * Display Driver
    * Mobile Extensions / TVAP
    Go to the Toshiba website to download these files.

  • Problem with J2RE 1.4.2_02 or 03 Installation

    Hi!
    I have a problem with the j2re 1.4.2_02 or 03 silent installation:
    everytime the setup starts "patchjre.exe" it displays the warning "Java(TM)-Update (1.4.2_03-b02) cannot be installed on this workstation because the Java(TM) Virtual Machine is already running..." - retry or cancel.
    If i click 8 times "retry" the setup will continue and everything is fine.
    No browser or other java apps are running!
    what can be the problem?
    thanks
    oliver

    I was having this problem as well. I extracted the MSI from the InstallShield and found that it's looking for a property called "SystemFilesLocked" to equal 1. If you pass it as a parameter and give it a value of 0, this error message doesn't appear. I've installed now to 15 W2K desktops without any issues.
    The 'silent installation' documentation for this product is sorely lacking. The install string I'm using is below:
    j2re-1_4_2_03-windows-i586-p.exe /S /v/qn"ADDLOCAL=jrecore SYSTEMFILESLOCKED=0 CONTROLPANELLOCKED=1 SKDSILENT=1 IEXPLORER=0 SYSTRAY=0 REBOOT=Suppress JAVAUPDATE=0 JAVAJAVAWLOCKED=0 WEBSTARTICON=0 /L C:\TEMP\LogFiles\JRE_JWS_142_03.log"
    Hope this helps...

  • Problem with install Premiere Elements 12 trial version

    Dear support
    I have a little problem with install Adobe Premiere Elements 12 (trial)
    During the installation I get the message (in German) Während der Installation des folgenden Produkts ist ein Fehler aufgetreten: . Starten Sie Ihr System neu und versuchen Sie es erneut.
    I installed the SW in two different notebooks. Unfortunately I get the same message on both notebooks.
    Below I have make some print screens during the installation and the error message.
    second picture is the error message.
    Could you help me in this case what I can to do?
    Thanks in advanced for you support.
    Best regards
    Murat Tan

    Try the basic troubleshooting steps :
    Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
    --> It’s already enabled
    Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es-windows.html )
    --> I have disabled it.
    Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    --> I have disable it.
    Reboot and Install in the enabled Administrator account and check.
    Murat Tan
    PC-Supporter/Telecom
    Kistler Instrumente AG
    Eulachstrasse 22, 8408 Winterthur, Switzerland
    Direct +41 52 2241 911, Main Office +41 52 224 11 11
    [email protected]<mailto:[email protected]>, www.kistler.com
    Confidentiality Notice:
    This e-mail is privileged and confidential and for the use of the addressee only. Should you have received this e-mail in error please notify us by replying directly to the sender or by sending a message to [email protected] Unauthorised dissemination, disclosure or copying of the contents of this e-mail, or any similar action, is prohibited.

  • Easier and better ways to solve current problems with Acrobat?

    Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
    Regards,
    Marc

    Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
    After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
    Regards,
    Marc
    Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
    Re: Easier and better ways to solve current problems with Acrobat?
    created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
    The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
    Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
    Thanks,
    David
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with Illustrator installer

    Downloaded installer for Adobe Illustrator and tried to install it onto a Windows 7 32-bit PC for work. The installer will open and begin to run then the status bar will roll back and the window will close, there is no error message displayed or any indication why it failed. I have checked the tast manager to see if its running in the background but it stops completely. I have also tried the following;
    I have tried the installer on another pc and it works without issue. Just seems to be a problem with this PC.
    I have tried running the installer as administrator and changing compatability mode but had no effect.
    I have changed the permissions for the installer, no effect.
    Tried installing it in safe mode but no change.
    I checked the system log but it says the installer worked fine.
    Have cleared the windows installer registry and reregistered it.
    I would appreciate any help or input you could give me on this matter.

    Hi Phillip,
    Kindly check Troubleshoot install issues with log files | CS5, CS5.5, CS6.
    Please share the details if you see any specific message in log files, also tell us which version of Illustrator you are trying to install.
    Thanks,
    Atul Saini

  • Problem with dv7-6140ew - is this a processor problem ? (i7-2630qm).

    Hello all
    As I mentioned in title I have a problem with hp pavilion dv7-6140ew (i7-2630qm) Win7 64bit.
    This is a brand new laptop I bought him few days ago
    Of course I notified this problem to the hp support center. But they did not know what it could be.
    But may someone will know where the problem is.
    I would like also to ask whether this is the normal behaviour?
    I have terrible interrupting (It looks similar to old problem with HDD witchout DMA) I saw, that it took place while the kernel process suddenly takes the large amount of the processor space. For instance
    by the mcAffee process (the antivirus) but it takes place also with other
    (eg at uninstalling of the software). But not always - There is on no rule.
    I recorded the example-film with 3dmark03 (I added the music from winamp) and in 0:25 the McSvHost.exe process start - which is visible on the photo.
    Check my video http://www.youtube.com/watch?v=dsV861xbVbw
    and the photo https://lh6.googleusercontent.com/-Spo2l-5sr3Y/Tpg7l8t2XII/AAAAAAAAC1s/3elBg68MWV4/s720/IMGP4330.JPG
    Bios version F.1A, 2011-07-22
    Windows 7 64bit
    Processor i7-2630qm
    4GB ram
    Radeon 6770M

    Another issue, that I found, is that, If process takes suddenly large amount of processor space in each of 4 core (8 with turbo boost) the error take place. For instance mcAfee process McSvHost sometimes cause such error. But it disappear when I change colligation in task manager for this process to be used by for instance one core.
    Does anybody knows what is going on and what cause it ?

  • Tty "problem" with execNative

    Folks,
    we have a "small" problem with the execNative stuff:
    We have to automate the installation of a tool, which requires a couple of
    manual interventions...
    One of that is the restart of some software on a different node, and once
    that's done, we need to send a "c" for continue to the original task on the
    initial server...
    We try to minic that be using expect and the spawn/wait functionality.
    The problem seems to be, that the execNative is taking away all tty's, and
    that exepct can't then send the signals to the "right" processes...
    Here's excerpts from what we try to achieve:
    SPS xml code:
                   <execNative userToRunAs="root" dir=":[workPath]" timeout="18000">
                        <shell cmd="/bin/ksh -x -c">
                             <![CDATA[                         
    # Then we need to start the expect script! (this is our InstallScript.xml installed InstallScript!)
    ./301_install_pai_base.sh
    ]]>
                        </shell>
                   </execNative>
    <!-- This next call restarts the DMGR, because that is needed during the installation on non-DMGR hosts... ;-) -->
                   <if>
                        <condition><equals value2=":[hostIsDeploymentManager_]" value1="FALSE"/></condition>
                        <then>
                             <retarget host=":[paiDeploymentManagerHostRef_]">
                                  <call blockName="restartDmgr">
    <!--
                                       <installedComponent path="@pluginFolder@/sunos/sparc/5.10/3.0.1" name="PAI" />
    -->
                                       <installedComponent name="PAI" />
                                  </call>
                             </retarget>
                        </then>
                   </if>
                   <execNative userToRunAs="root" dir=":[workPath]" timeout="18000">
                        <shell cmd="/bin/ksh -x -c">
                             <![CDATA[                         
    # Then we need to start the expect script! (this is our InstallScriptPart2.xml installed InstallScriptPart2!)
    ./301_install_pai_base_part2.sh
    ]]>
                        </shell>
                   </execNative>
    The scripts are:
    301_install_pai_base.sh:
    ./install_pai_no_dmgr.exp "$SOLUTION_MODULE" "$PSA_PATH" "$LOG_DIR" "$TMP_PAI_DIR" "$BASE_DIR" > ./install_out.log 2>&1 </dev/null &
    echo $! >mysuperduperscriptprocessid
    updatelog_file="./install_out.log"
    sleep 10
    if [ -f "$updatelog_file" ]
    then
              while :
              do
              last_lines=`tail -2 "$updatelog_file" 2>/dev/null`
         if echo $last_lines | grep "BUILD FAILED" >/dev/null 2>&1
         then
                        echo "There were failures during install!"
                        kill -TERM $id
                        exit 1
    fi
              if echo $last_lines | grep "(c,a)" >/dev/null 2>&1
              then
                   # The kill -HUP is handled in the continuation script!
                   exit 0
              fi
              sleep 1
              done
    fi
    301_install_pai_base_part2.sh:
    id=`cat mysuperduperscriptprocessid`
    rm -f mysuperduperscriptprocessid
         updatelog_file="./install_out.log"
         sleep 10
              while :
              do
              last_lines=`tail -2 "$updatelog_file" 2>/dev/null`
         if echo $last_lines | grep "BUILD FAILED" >/dev/null 2>&1
                   then
                        kill -TERM $id
                        exit 1
    fi
         if echo $last_lines | grep "BUILD SUCCESSFUL" >/dev/null 2>&1
              then
                        kill -HUP $id
                        exit 0
              fi
              sleep 1
              done
    install_pai_no_dmgr.exp:
    ******************************************************************************#!/usr/local/bin/expect
    set timeout 1000000
    proc sendCtoContinue {mySpawnID} {
    send -i $mySpawnID "c\n"
    proc sendAtoContinue {mySpawnID} {
    send -i $mySpawnID "a\n"
    # send_user "Executing ./installPAI.sh\n"
    spawn ./startInstaller.sh -m FULL -i [lrange $argv 0 0] -a [lrange $argv 1 1] -l [lrange $argv 2 2] -t [lrange $argv 3 3] -b [lrange $argv 4 4] -p true
    set paiSpawnID $spawn_id
    trap {sendCtoContinue $paiSpawnID} SIGHUP
    trap {sendAtoContinue $paiSpawnID} SIGTERM
    expect "(c,a)"
    wait $paiSpawnID
    expect "Total time:"
    # expect "Install complete"
    What we found out is:
    a.) We need the redirection of the STDIN/STDOUT/STDERR at the first line:
    ./install_pai_no_dmgr.exp "$SOLUTION_MODULE" "$PSA_PATH" "$LOG_DIR" "$TMP_PAI_DIR" "$BASE_DIR" > ./install_out.log 2>&1 </dev/null &
    b.) The retarget clause/statement is executed!
    c.) The "part2" script is started!
    d.) The "c" is send! (aka, the kill will be executed!)
    e.) The "c" does not reach the correct process, aka: the process started via:
    spawn ./startInstaller.sh -m FULL -i [lrange $argv 0 0] -a [lrange $argv 1 1] -l [lrange $argv 2 2] -t [lrange $argv 3 3] -b [lrange $argv 4 4] -p true
    Any clues?
    Do we need to work out something different for that stuff?
    Matthias

    I don't think the console font is the problem. I use Lat2-Terminus16 because I read the Beginner's Guide on the wiki while installing the system.
    My /etc/vconsole.conf:
    KEYMAP=de
    FONT=Lat2-Terminus16
    showconsolefont even shows me the characters missing in the file names; e.g.: Ö, Ä, Ü

  • A problem with threads

    I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
    Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
    My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
    Thank you in advance,
    Lefty

    This was one solution from the socket programming forum, have you tried this??
    public Thread MyThread extends Thread{
         boolean active = true;          
         public void run(){
              ss.setSoTimeout(90);               
              while (active){                   
                   try{                       
                        serverSocket = ss.accept();
                   catch (SocketTimeoutException ste){
                   // do nothing                   
         // interrupt thread           
         public void deactivate(){               
              active = false;
              // you gotta sleep for a time longer than the               
              // accept() timeout to make sure that timeout is finished.               
              try{
                   sleep(91);               
              }catch (InterruptedException ie){            
              interrupt();
    }

  • Problem with Threads and a static variable

    I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
    Code functionality:
    A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
    The problem as far I understand is:
    Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
    Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
    Thanks,
    B.D.
    Code:
    private static volatile boolean bChanged = false;
    private static Thread objMainProcess;
       protected static void Init(){
            objMainProcess = new Thread() {
                public void run() {
                    while( objMainProcess == Thread.currentThread() ) {
                       GetState();
            objMainProcess.setDaemon( true );
            objMainProcess.start();
        public static void initStatusTimer(){
            if(objTimer == null)
                 objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                    public void actionPerformed( java.awt.event.ActionEvent evt){
                              SetState();
        private static void SetState(){
            if( objMainProcess == null ) return;
            synchronized( objMainProcess ) {
                bChanged = true;
                try{
                    objMainProcess.notify();
                }catch( IllegalMonitorStateException e ) {}
        private static boolean GetState() {
            if( objMainProcess == null ) return false;
            synchronized( objMainProcess ) {
                if( bChanged) {
                    SendMessage();
                    bChanged = false;
                    return true;
                try {
                    objMainProcess.wait();
                }catch( InterruptedException e ) {}
                return false;
        }

    Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
    Again as you said, There is a reason I can't call sendMessage() inside setState().
    The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
    Thanks,
    B.D.

Maybe you are looking for

  • CS6 Error: "Could not complete your request because of a program error."

    I get the error "Could not complete your request because of a program error." anytime I try to open a .psd file someone has sent me. This error is occuring in CS6. Anything I can do?

  • OpenJPA - ArgumentException: Could not locate metadata for the class usi...

    I'm getting the following exception when executing logic/queries around JPA entity classes: {color:#333399}nested exception is: <1.0.0 fatal user error> org.apache.openjpa.persistence.ArgumentException: Could not locate metadata for the class using a

  • Help with project PLEASE

    does anyone have any suggestions on how to do the rest of this project import javax.swing.JOptionPane; public class Bank {      private static char which;      public static void main(String args[])      Account[] bankAcct = new Account[30];      int

  • Invoice and Inventory App

    I run a small clinic with one acupuncturist and would like to track her daily sales on her iPad. Ideally, she'd write up an invoice (no need for printing) with the treatment cost and the supplements purchased for each patient. Then at the end of the

  • Embedding a .flv inside of a SWF?

    1.) Why would you want to embed a .flv inside of a SWF? 2.) Do you need to do this if you want to place small video clips inside of a SWF? Thanks.