Problems with automatically backing up ebooks
Hi,
I just started using Adobe Digital Edition several days ago with version 1.5. And there is a "ebx_backup" folder under "My Digital Editions" which stores the automatically backed-up ebooks files. But yesterday, after i download the new version 1.6 and purchased several others new ebooks afterward, they are no longer automatically backed up and doesn't appear in the "ebx_backup" folder. Is it a bug? How can i solve it? Or can i manually move the .pdf ebooks from "My Digital Editions" to "ebx_backup" folder?
Thank you.
Yiqing
Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod
Similar Messages
-
Problem with Automatic Replies or Out of Office
Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
: https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA... -
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Problems with Automatic Workflow Customizing
Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders ÖhrlingHello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful - -
Problem with Portlet Backing Context
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay PatelVijay -
You might want to post this to the Portal newsgroup.
Regards,
Kunal
"vijay patel" <[email protected]> wrote:
>
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using
this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel -
Recovery with automatic back up
A few days ago, my computer would not load windows. I was told by a couple different computer techs that I needed to reformat the hard drive due to a virus. I have windows vista on a gateway computer that was bought at best buy a year and a half ago. I used the recovery with automatic back up to save my docs and pics. Now my question is how do I get my pics and docs from the recovery drive? I am at a loss here.
Any help would be appreciated.Thats so much of a description its hard to start someplace to explain to you.
Are you saying you ran the recovery partition on your computer to load it to a factory default? If thats the case, its a total destruction of the drive and restored to the time you first opened it out of the box, that means everything gets deleted on the target drive.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums. -
My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian CollaertHello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Problems with automatically managing
So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
So, I have a couple of questions:
First of all, is anybody having this problem with updating songs to their ipod?
Secondly, if you are, have you found any sort of fix?
Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
http://docs.info.apple.com/article.html?artnum=93888 -
Problem with OEM backing up on windows system.
Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.You may want to take a look at these metalink notes:
Ref.
Subject: ERROR in RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:246107.1 Type: PROBLEM
Last Revision Date: 08-JUL-2004 Status: PUBLISHED
Subject: How to Configure RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:145843.1 Type: BULLETIN
Last Revision Date: 21-OCT-2005 Status: PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/ -
Problem with the back button in the Alv ouput
i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K -
Problem with getting back "synchronous" process result!!!
i have created the partner link to my synchronous process which is already on the server, along with the input and output variable for dealing with that particular process...
my input variable matches the xml schema of my synchronous process... when i expand the input variable node, i can see the elements which i'm trying to pass as the input to my synchronous server.
HOWEVER!!! there's a problem with my output variable, clicking expand on the node, it displays nothing (basically it's suppose to be in the format of the xml schema which i have specified).. hence i cannot work with the output of the asynchronous process...
cheers,
Shivek
how do i fix this problem..can you please provide little bit more details? where do you click output variable? are you clicking from bpel console debugger?
-
Im facing problem with my back camera.it's keep on hanging
PLease help me fix my problem regarding my back camera because it keeps on hanging.please help solve this problem.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Problem with automatic creation of Universes on top of SAP BW - RKF
Hello
When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
I'm using BO XI 3.1 SP2 with SAP BW 7.0.
AndréI created universes based on a BW Query in the following situations:
User specified username and password: language = PT - Dimension's name OK, RKF are GUID
User specified username and password: language = EN - Dimension's name OK, RFK are GUID
SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
I edited prefences of CMC to Portuguese. The same results.
The problem with the RKF still exists.
Is there some way resolve this problem? -
Sap4rails - Problem with automatic handling of data types under Windows
Hello all,
I've been trying to develop my own application using sap4rails library but whenever I call one of standard RFCs I always get strange results. Here is the piece of the code from my model which gets data from CURRENCY_LIST table:
require "sap4rails"
class App < SAP4Rails
@@funcs = [
'BAPI_CURRENCY_GETLIST',
# User defined instance methods here
attr_accessor :message
class << self
def getlist()
RAILS_DEFAULT_LOGGER.info("[App]#getlist ")
App.BAPI_CURRENCY_GETLIST.call()
return App.BAPI_CURRENCY_GETLIST.currency_list.rows()
end
end
here is the code from the controller
class AppController < ApplicationController
layout "standard-layout"
def index
list
render_action 'list'
end
def list
RAILS_DEFAULT_LOGGER.info("[LIST] action started...")
@currencies = App.getlist()
end
end
end the code from the view:
<html>
<head>
<title> Currencies </title>
</head>
<body>
<h1>Listing Currencies</h1>
<table border="1">
<tr>
<% @currencies.first.each_key {|key| %>
<th><%= key %></th>
<% } %>
</tr>
<% for currency in @currencies %>
<tr>
<% currency.each_value {|val| %>
<td><%= val %></td>
<% } %>
</tr>
<% end %>
</table>
</body>
</html>
As you can see everything is just simple. I run my application on the Windows XP OS and always get such result:
<html>
<head>
<title>Currencies and Exchange Rates: index</title>
</head>
<body>
<html>
<head>
<title> Currencies </title>
</head>
<body>
<h1>Listing Currencies</h1>
<table border="1">
<tr>
<th>VALID_TO</th>
<th>ALT_CURR</th>
<th>LONG_TEXT</th>
<th>CURRENCY_ISO</th>
<th>CURRENCY</th>
</tr>
<tr>
<td>oran peseta </td>
<td>231And</td>
<td> </td>
<td>099991</td>
<td>ADP ADP02</td>
</tr>
<tr>
<td>babwean Dollar </td>
<td>231Zim</td>
<td> </td>
<td>699991</td>
<td>ZWD ZWD71</td>
</tr>
</table>
</body>
</html>
It seems like there is sth wrong with mapping data types from R/3 to data types in Ruby. Does anyone has an idea what could be wrong? I would be very grateful for any help.
Best Regards
Michal M.First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]
Maybe you are looking for
-
Best setting for gif animations
what is the optimal setting for animated gifs
-
Hi all, in my billing doc report i need sale order no . i am picking AUBEL field from VBRP table . but in my VBAP table i am having VBELN field no starts with 4 seris. but in AUBEL i am having 3 series no. My req is i need VBAP-VBELN in billin
-
Prints last page twice: HP LaserJet Pro P1102w
My HP LaserJet Pro P1102w prints the last page of the last job as the first page of the new job every time. The entire job prints every time (i.e that last page prints with the new job as the last page and also as the first page of the next job). T
-
Sorting Music from 2 different Itune accounts in 1 Library??
I have music from 2 different i-tunes accounts co-mingled in one library on one of my laptops - I'm not exactly sure how that happened - maybe trying to synch the wrong ipod to the wrong computer? Is there easy way to sort a library by user-account n
-
i have a new ipad 3rd G and i can't see the facetime application, but i can see the icon in the sitting>notification how can i work with the facetime app??? plz reply me