Problems with automatically managing

So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
So, I have a couple of questions:
First of all, is anybody having this problem with updating songs to their ipod?
Secondly, if you are, have you found any sort of fix?
Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.

Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
http://docs.info.apple.com/article.html?artnum=93888

Similar Messages

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

Problems with Automatic Workflow Customizing

Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders Öhrling

Hello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful -

Problem with discovering Managed Servers

Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Sorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

I have a problem with session manager session files because of the invalid json storage data submited by firefox

Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem with Events Manager: 'slct'

I set up an Events Manager item to run a script whenever the event "Selection" ( 'slct' ) is activated. The script works beautifully and I'm having no problem with the script itself. I am, however, having problems with what happens after the script finishes. I have this problem even if I completely comment out the script or delete everything inside the script file and leave it blank. The purpose of the script is to automate things when I select specific layers. That works and the script has some checks to prevent anything from happening unless one of those specified layers is selected.
The problem is, when I select a tool using the keyboard shortcuts, it will revert back to the previous tool upon the next keypress. It basically acts as if I am using toggle mode for that tool by holding down the key for that tool.
I wiped out my preferences but that did not solve the problem. It makes no difference how my keyboard shortcuts are mapped...either default or user defined. So for an example, here is how some of my keys are mapped:
B-Paintbrush tool
S-Brush Size Increase
So if I'm using the Clone Stamp tool and want to switch to the Paintbrush tool, I will press the "B" key. The tool switches as it's supposed to. If I need to change the size or hardness of the brush, I press one of the corresponding keys...let's say "S" to increase size. When I press "S" nothing will happen until I release that key. Once I do release it, the tool switches back to the Clone Stamp tool. You can get this same effect yourself if you hold down the key of the tool you are switching to (use the toggle mode) and then try to change size/hardness using the keyboard shortcut for that function while still holding that tool's key down.
If I select the tool from the Tools Palette, I do not have this problem. If the tool is selected from within my script, I do not have this problem. The only time I have this problem is when using the keyboard shortcuts to select the tool.
Keep in mind that I have tried this with the script code completely bypassed/erased so no script code actually exedutes. When I turn of the Events Manager or remove the 'slct' item from Events Manager, I do not have this problem at all. If I hold the <SHIFT> key down while selecting the tool, I do not have this problem (this is the same as if you were to hold down the <SHIFT>+<tool key> and press the key to change size/hardness).
To me, it seems as though if there is a 'slct' event item in Events Manager and the keyboard is used to select a tool, Photoshop treats it as if that key is being held down (toggled) until another key is pressed (or even the same key).
If anyone knows how to get around this problem, I would greatly appreciate it. Thank you.

I'm having the same problem where a keystroke (like changing size "[ or "]") will revert to a previous tool rather than change size. Particularly annoying when you left your previously selected eraser slightly larger or smaller than your brush size and don't realize it till you've erased.
So far, from reading across quite a number of forums, it seems the event listener istelf causing the issue
At the moment I've just been thinking of "BB" as my shortcut instead of "B" so when it reverts it reverts back to the brush anyway.
I'll come back if I find a real solution to this annoyance ;P
CS5
Wacom Intuos4
Windows7

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Login timeout expired".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

ITunes 10.6 Mac Problem with Subscriptions Management

I have my MacBook updated to the latest everything, including iTunes 10.6.
I have noticed a problem with iTunes, in that I can log in to the store with my AppleId and buy apps, music, books, magazines movies etc and everything works fine.
However some apps have an auto-renewing subscription and I have a problem here. I log in with my AppleId, go to manage account and am then presented with an endless loop of password requests.
There doesn't seem to be any way to get to the subscriptions to turn them off.
Does anyone have any helpful tips?
thanx

I just tried this also on my iPad and it doesn't work there either. Although I can get into the account settings, when I try and change a subscription I get a big black rectangle in the middle of the screen and the iPad hangs until the screen login thing kicks in and I have to enter my pincode again.
Maybe this is something to do with my AppleId, I can't actually believe this is a fundamental problem, although maybe I am optimistic.

Big Problem With Solution Manager EHP1 ?

Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.

Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Problems with Transport Management System

Hi All,
i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
Regards,
Abhishek Jain

Problem with stoping managed server

I have wls 10.3.5 on solaris10 64bit, created the domain mytest_cluster with AdminServer and two managed servers in one cluster: ms1 and m2.
All are on the same server.
For ms1 I can start and stop with no problem.
For ms2 I can start, but I cannot stop it without killin it from OS.
The log for the stop as :
>
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
This Exception occurred at Mon Dec 05 15:44:53 GMT 2011.
java.lang.NullPointerException
at weblogic.management.scripting.WLSTHelper.loadUsernameAndPasswordFromBootProperties(WLSTHelper.java:293)
at weblogic.management.scripting.WLSTHelper.loadUsernameAndPasswordFromBootProperties(WLSTHelper.java:281)
at weblogic.management.scripting.WLSTHelper.getUsernameAndPassword(WLSTHelper.java:270)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:158)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx4.connect$1(<iostream>:16)
at org.python.pycode._pyx4.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(/oraclebase/product/Middleware11.1.1/user_projects/domains/mytest_cluster/shutdown.py:6)
at org.python.pycode._pyx15.call_function(/oraclebase/product/Middleware11.1.1/user_projects/domains/mytest_cluster/shutdown.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Problem invoking WLST - Traceback (innermost last):
File "/oraclebase/product/Middleware11.1.1/user_projects/domains/mytest_cluster/shutdown.py", line 6, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server
Use dumpStack() to view the full stacktrace
Done
Stopping Derby Server...
>
The error is kind og generic, How I can troubleshoot this?
Note that I can start it and all the components are on the same server.
Thanks
Edited by: gadba on Dec 5, 2011 11:04 AM

Has anyone had the similar problem?
There is another problem with the MS2. I created boot.properties and seems it does not affect because the start still asks for the username and the password.
I have done the same with MS1 without the problem.

WS2012 Standard R2 with Essentials sudden problem with Server Manager, Essential Dashboard and other services

Hi all,
I have a problem with my Windows Server 2012 R2 with Essential installed. When I try to run Server Manager the server manager window doesn't appear and the same thing applies for starting the essentials dashboard. This leads to that some of the features doesn't
work properly like remote web access, client backup and so on. When I check the Services a lot of services haven't even started. Trying to manually start for example Windows Server Essentials Management Services gives me following error message:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
What can be wrong here? I haven't done anything to the server that could start these problems. This started all of a sudden.
Thank you all in advance for any help.
EDIT:
I rebooted my server in safe mode and I tried to run SFC /Scannow which stops at 84% and gives me following message:
"Windows Resource Protection could not perform the requested operation."
I also tried to run "DISM.exe /Online /Cleanup-Image /RestoreHealth". This did not help either. It completes the operation but nothing changes. The problem is still there.
I thought that my server backups were OK and that this problem would be gone by restoring the C: drive with backup image. The problem is that all my good backups was rewritten with new backups that could not take backup of the C: drive for some reason. Now
I need to solve this problem without reinstalling the whole operating system.
EDIT:
I have also completed the chkdsk C: /r command and now the SFC /Scannow command can be completed, with notification that some files could not be fixed. I have attached the sfcdetail.txt file which points out that
"tsgclean.exe" cannot be repaired. What has that file to do with my WS2012 problems...
2015-01-04 03:12:54, Info CSI 00000477 [SR] Cannot repair member file [l:24{12}]"tsgclean.exe" of Microsoft-Windows-TSProxy-EdgeAdapter,
Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

Hi,
Did you remember any operation which you had done before this issue occurred? For examples, install any update,
install any third-party application or any other? Just a confirmation, thanks for your understanding.
For those problematic services, please open services’ Properties and navigate to
Dependencies tab, then check if all system components which this service depends on run as normal.
In addition, please open Event Viewer and check if find relevant events. Meanwhile, please follow the path:
%programdata%\Microsoft\Windows Server\Logs and check Dashboard log file if find more clues.
By the way, when you run
sfc /scannow command completely, did you open Server Manager or Dashboard again? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hello Justin,
Regarding the third-party applications:
I have not installed any third-party application that could cause this problem. All my third-party applications that are installed on the WS2012 R2 are confirmed working well with the operative system and are installed at the time when I hadn't these problems.
I cannot say anything about windows update because that is something that I update once in a week after checking that no user is reporting any issues. I have learned my leason with windows update when I had Surface Pro 2, that was a dissaster.
Regarding the Windows Updates:
Anyway, I tried to remove all the windows updates before as well (not the security updates) down to 5th December which is the time when I know that my server worked well. Only two updates could not be removed (KB3012199 and KB2989647). I don't
know if these two updates can cause any problem?
Regarding the problematic services:
For example: Checking the properties for "Windows Server Essentials Management Service" -> It is dependable on
"1. Active Directory Domain Services" and "2. Windows Server Essentials Provider Registry Service".
No 1 is running but not no 2. If I try to start no 2 service it will give me the same message as before:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
Regarding the Logs:
I have uploaded Dashboard log files which are created after 5th December to my dropbox account: Link
Regarding the SFC command:
Of course, when the SFC command was completed but with error that it could not repair
tsgclean.exe I tried to start the essentials dashboard and WS2012 server manager with no luck.
What about the error message? I looked up that file in the explorer and it is located in folder "C:\Windows\WinSxS\amd64_microsoft-windows-tsproxy-edgeadapter_31bf3856ad364e35_6.3.9600.16384_none_2ec8d374a0ac5606"
Why can't it be repaired and what kind of file is that?
Best regards

Problems with automatically managing

Similar Messages

Maybe you are looking for