Problems with BEFW11S4 V2 Wireless Router

I just brought in this BEFW11S4 V2 to work to use as a temporary wireless router. Last night I had it working perfectly at home, updated the firmware got it all setup for work and all was good.
I bring it in today power it on, plug an ethernet cable into it and a desktop so that I can get my WEP password off the 192.168.1.1 ui. Bam windows comes up with limited or no connectivity. Try to enter setup anyways through ie and its a no go. Run an ipconfig get a 169.254.160.74, something ive never witnessed. Did a release and a renew, no dice. Tryed on another computer, same deal. So I download linksys site advisor program maybe it will fix this, nope it says that it doesnt detect a router. Ive tryed other ethernet cables and nothing seems to work.
Can anyone help me? I dont know where to go? Is there anyway I can set the router to factory defualts without being able to enter the ie ui? Help is greatly appreciated.

Issue Resolved, figured out how to hard reset it.

Similar Messages

Persistent problems with Linksys WRT54GS Wireless Router

I'm currently running Vista with a Linksys WRT54GS router. As earlier discussed in this forum I am still having intermittent problems with the ATV taking down my network. Anyone else experienced this and come up with a sure fire fix?
When it's working I like the set up but I have to say, it is not nearly stable enough to be an everyday solution for getting my music and photos to my living room.
Thanks.

Hi, I am having the same problem -- my 2WIRE modem from AT&T recently blew up. So, I purchased the WRT54GS. As soon as I reconnected the AppleTV to the new router via a wireless connection, all of my machines (Mac and PC) lost their internet connections. I'm seriously considering going out and getting another 2WIRE.

Problem with Printing via Wireless Router - Samsung scx4300

Hi! I need your help:
I'm trying to install a new printer (samsung SCX 4300), via a wireless router (IP:192.168.0.1) but when adding it, it looks inactive and I'm nit able to print. Like if IP address is occupied. I use lpd + Ip address but Print and Fax system doesn't find it. I've already installed the most recent drivers. Any solutions?
Many thanks for your time!

HI,
Try here: Mac OS X v10.6: Printer and scanner software
Repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Problem with Linksys WRT54G2 Wireless Router

My ipod sees the linksys wireless connection, it has a lock icon but doesn't ask for the Shared Key i have the security set to WAP, why is this?

Welcome to the Linlsys Forums, please follow the steps below to gain access to your Wireless Network.
Step 1
Tap on the "Settings" icon.
Step 2
Select "WiFi" from the menu.
Step 3
Slide the "WiFi" tab to the "On" position.
Step 4
A selection of wireless networks will appear below. If the network has a lock icon next to it, then you will need the password for that network in order access it. If there is no lock icon, then that connection is public, and you will be able to access it.
Step 5
Click on the network that you want to access, and the ipod will connect to that network whenever you are in its range. Remember that a password might be needed to gain access to that network.
Note: If you are sure that you are within a wireless network range, but do not see it when you access the WiFi menu, you can manually enter the access information by clicking on the "Other" tab.
Have a nice day and I hope this helped.

I am having problems with connecting to my router wireles...

I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?

Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

How do i configure my airport to work with my other wireless router

how do i configure my airport to work with my other wireless router? I want to be able to listen to itunes through my speakers wirelessly.

Please check out the following Apple Support article for details on the many methods to use an AirPort Express for iTunes streaming.

Using Airport Extreme with a Netopia Wireless Router 2247NWG

Hi, I'm trying to set up an airport extreme base station (AEBS) with a netopia wireless router and my XP SP3 Laptop. I have the extreme plugged into the router and the set up of the AEBS went fine. I have a solid green light on the AEBS and it appears to be working OK. When I move to another room in the house, I have two wireless networks available - the netopia wireless router and the AEBS. Whichever of the networks I connect to, the signal strength is extremely poor and the other is showing available with 5 bars. When I connect to the strong network, the signal goes weak and the original network is available with 5 bars. I've tried disabling the wireless on the router but this doesn't help. The router network is still showing as available with 5 bars but I can't connect to it.
First day with my MAC gear (haven't even opened the MacBook box yet) and I need help!!!!!!!!!!!

So, today I finally broke down and plugged them both into the two available ports in the back of the AEBSn via ethernet cables. My question is: Do I have to "turn off" the airport connection in order to make the ethernet connection the default connection?
That might help but it isn't necessary. You can simply rearrange the order of items in the Network preference pane.
Search on the internet and you will find many ways to check the speed. One is http://us.mcafee.com/root/speedometer/default.asp

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

Problems with a WRT54G wireless linksys router.

Hello, I'm having problems with my WRT54G linksys wireless router.
With this router, I tend to get lag spikes and often disconnect while playing online games at a certain time. The spikes usually get worse
during the afternoon/evenings (2pm-12am PST).
Some information about my setup:
Firmware version: v.8.00.7
Shaw high speed cable (i think ~10mbit connect)
xp/vista OS (two computers linked up via router)
- Both computers are connected via wire, not wireless
I've changed settings for my router through advice, but nothing seems to work. Nobody else is connected to my router because I get nothing
in the logs and the DHCP client list has only 2 IPs. I'm sure my router is the one giving me lag spikes because I sometimes connect my
modem directly to my computer (the XP) and receive no lag spikes. Someone does use wireless, but I turn wireless off at times so that
isn't the problem. I've also secured my wireless, so I know it isn't the problem.
Anyone know what's causing these lag spikes and how I can fix it? Do I need a new router?
If anymore information is needed, please do not hesitate to ask.
Message Edited by Dysouk on 10-17-2009 12:24 AM
Not so computer savvy

Try to readjust the wireless settings of the router...Open the linksys setup page and try the following settings...
- Reduce the MTU size to 1364.
- Change the Wireless Channel to 11-2.467GHz.
- Under Advanced Wireless Settings,Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304
Now,check the difference...If you are still facing the same problem then,try to upgrade/reflash the router's firmware,reset the router and reconfigure it from the scratch.

Problems re-setting up BEFW11S4 V2 wireless router

I disconnected the Linksys wireless router as well as the RCA DSL/Cable modem. When I tried to reconnect, 1) the wireless network is no longer seen by my laptop, and 2) does not appear the cable/dsl modem and wireless router do not recognize each other.
I can't recall with slot in the wireless router the ethernet cable from the cable/dsl box should be connected to and I realize it should have been just a plug and play.
Sorry for the the non-technical explanation, but any assistance would be greatly appreciated.
Message Edited by wayneelliott on 06-08-2008 10:37 AM

• Set the router to Obtain IP Automatically or DHCP.
• Disable the Block WAN Request and clone the PC's MAC address.
• Change the LAN IP of the router to 192.168.2.1.
• Perform a power cycle.

Playstation 3 - connection problems with BEFW11S4

I am having trouble connecting my Playstation 3 to the internet via my BEFW11S4 wireless router.
The PS3 scans and finds the router ok (signal strength is good), I enter the SSID, WLAN security setting is WPA-PSK (TKIP), I enter the WPA key and select 'Easy' in the Address settings page.
The PS3 comes back with the following error message
A connection to the access point could not be established. Check the security settings for the wireless LAN (8013013E)
Does anybody have any idea what I might be doing wrong?
I have a laptop and desktop which connect via this router with no problems.
Someone suggested switching off the router security - might this help? - how would I do that exactly?
Any help would be gratefully received. Thanks.
Message Edited by BennyBoy on 04-01-200705:46 AM

Thanks for the replies....
I made two adjustments - turned off the router security and manually entered an IP address in the PS3 (as advised on another forum) - not sure which of these made a difference (I'm sure through trial and error I could work it out) but it seems to be working ok now.
However the connection speed seems very slow - to download the latest system update took over an hour - it shouldn't be this slow should it?
Any advice on how to achieve a faster speed?

Need help with my E2100L Wireless Router

I moved back home with the parents after graduating from college while I'm searching for a job and I noticed my parent's wireless internet connection was really poor. I'm normally pretty decent with computers but I haven’t been able to fix this problem so I am hoping if I explain it to you fine folks and can point me in the right direction to getting everything running properly.
The problem I’m having is with the wireless signal fluctuating frequently when I’m not in the same room with the router. I know the issue is not with Comcast or the modem because when I remove the router and just plug into the modem I get 25 Mbps all day long when I run a test on Speedtest.net.
The setup is Comcast Internet 25 Mbps, SB6120 Modem, and Linksys E2100L Wireless Router with WPA2/WPA security activated.
Before I touched anything the modem and router were originally in my parent’s bedroom. I was getting speeds of less than 1 Mbps if any when I was in my bedroom so I moved them into the living room to be more centrally located. Our house is a one story house with bedrooms divided by the living room. The move seemed to help a little but something was still really wrong so I did a hard reset on the router. I setup up the network manually by going through the settings on 192.168.1.1. which made things work a little better. However I still wasn’t getting close to the speeds I should have been getting and when in my bedroom the connection would sometimes drop out altogether. So I did another hard reset on the router and this time I used the CD that came with it (Cisco Connect) to setup the network. That has got my problem halfway fixed because now if I am in the living room and my laptop is connected wirelessly when I run the speed test I get 25 Mbps.
I thought I have solved everything because in my bedroom the signal was now very good at 20 Mbps… except the 20 Mbps didn’t last. It held around 20 Mbps for the about first 10 minutes but then dropped to about 16 Mbps for a while. A day later when I run the test I now range anywhere from 3 Mbps to 14 Mbps. There seems to be no consistency. I did a hard reset again and setup the network using the CD and the problem persists. I get 20 Mbps in the very beginning and then it lowers from there and fluctuates frequently.
I thought it might be a firmware issue so I successfully updated it today to the latest firmware “1.0.05 build 4 Mar 8, 2012” but the same thing happens. I just don’t get it. Why am I able to get 20 Mbps for the first few min in my bedroom and then it’s a crapshoot thereafter? If it were interference wouldn’t the interference always be there and not be a gradual onset? Why when I’m in the living room with the router is it perfect at 25 Mbps but as soon as I go to my bedroom I get a much much lower connection speed.
I could handle the speed being lower if it was consistent but it’s not. This post has taken me about 20 min to type and while doing so I ran the test a few times at a couple minutes apart and got 3 Mbps, 7 Mbps, and 10 Mbps speeds. Someone please help! This is driving me crazy!!!

When in my bedroom there are only 2 other networks available to join that belong to neighbors but their signal strength is fair at best while my signal dances between being excellent and good. There is no microwave oven, cordless phone, or garage between me and the router. When I'm in my bedroom I'm no more than 10 feet from the actual router and only seperated by a wall and I'm pretty sure its not a brick wall.
Again I don't understand how it could be interference. If there was something interfering wouldn't it always be interfering? Like I said in my first post every time I reset the network I get speeds of 20 Mbps for the first few min in my bedroom and then it gradually lowers and I get a fluctuating speed between 3 and 14 Mbps.
In the settings there is no channel width option of 40 MHz only. I get "20 MHz only" and "Auto(20MHz or 40MHz)" as my options. I have tried them both but don't really notice a difference.
I am going to try the insider program today to see what its results are.

Problem with Skype and Wireless Networks

I have been having a problem with Airport for about 10 months. Long winded explanation follows.
Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

Hi there
Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
64 bytes from 10.10.10.1: icmp_seq
and so on.
After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

HT1178 How do I set-up my Time Capsule to work with my existing Wireless Router?

The existing wireless router is my connection to the Internet and I would like to keep it that way. I really want the TC to fuction as an external Hard Drive/Server, Backup Disc! The TC is where all my Music and Photos are located together with my Backups!
I have tried different configurations and I get it to work for a wile, but after a few minutes it will disappear from my Air Port Utility, a rescan will not bring it back, but if I unplug and then plug it back in it will reappear. However if the TC shows in Air Port Utility or not the TC still shows up on my Desktop.
What Settings should I use in Air Port Utility, Should the Ethernet Cable be plugged into Ethernet or LAN Port?
My Current Settings are:
Ethernet Cable: Connected to the ETHERNET PORT
AirPor Tab:
Wireless Mode: OFF
Connect Using: ETHERNET
Internet Tab: Internet Connection
Connect Using: ETHERNET
Connection Sharing: OFF (BRIDGE MODE)
TCP/IP:
Configure IPv4: USING DHCP

I am Running OS 10.5.8 on a PowerBook G4.
Below you will see the Log (IP Address, AirPort ID, Eternet ID, Subnet Mask, Router Address, DNS Server Info has been removed).
I had the TC was originally set-up connected to a DLS Modem, all worked fine Backups over TM all was ok, but then the Modem died. (I upgraded to a Wireless Router). I did have it set up, but I nolonger know the settings, I wanted to do a backup with TM, which had not been done for a long time (6 months)
I tried to backup, but either it was not working or was taking sooooo long, that I decided to do the Backup over Ethernet (still took the hole day for 8.5 GB). I had read that I nedded to chang my setting to be able to Backup with Ethernet. Did not Save the previous settings hence my problem!
Log:
Nov 21 08:23:26
Severity:5
Initialized (firmware 7.6.1).
Nov 21 08:23:31
Severity:3
No Address for NTP server time.apple.com.
Nov 21 08:23:31
Severity:5
Internet configuration leased [IPv4] -- host <0> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 08:23:33
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 08:23:46
Severity:3
No Address for NTP server time.apple.com.
Nov 21 08:24:01
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +7 seconds).
Nov 21 08:28:05
Severity:5
Connection accepted from [%bridge0]:49362.
Nov 21 08:28:06
Severity:5
Connection accepted from [%bridge0]:49363.
Nov 21 08:28:06
Severity:5
Connection accepted from [%bridge0]:49364.
Nov 21 09:24:53
Severity:5
Initialized (firmware 7.6.1).
Nov 21 09:24:57
Severity:3
No Address for NTP server time.apple.com.
Nov 21 09:24:59
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 09:25:00
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 09:25:02
Severity:5
Connection accepted from [%bridge0]:49884.
Nov 21 09:25:03
Severity:5
Connection accepted from [%bridge0]:49885.
Nov 21 09:25:03
Severity:5
Connection accepted from [%bridge0]:49886.
Nov 21 09:25:12
Severity:3
No Address for NTP server time.apple.com.
Nov 21 09:25:28
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +7 seconds).

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

Problems with BEFW11S4 V2 Wireless Router

Similar Messages

Maybe you are looking for