Problems with BI Integrated Planning

Hello, everybody,
We installed BI 7.0 and want to use BI Integrated Planning, but then i connect to Modeler Wizard i get error No JCO Connection. Our BASIS Team can't find an issue.
Maybe there is some kind of configuration in BI side, not just in BASIS?
Could you give us some advice?
Thanks in advance.
Best Regards,
Arunas Stonys

Joanne,
Are you still having issues with BI-IP? I have been troubleshooting with the basis folks in getting BI-IP up on a new system over the last few day to a week and have now gone through the process myself whereas before I had been given a system already set up. I have enclosed some troubleshooting feedback with my counterpart in getting the system up.
What type of issue are you having?
Can the basis folks start the planning modeler or planning wizard in RSPLAN even if you can't?
1. The note mentioned above 919850 and the help documentation in SPRO under
SAP NETWEAVER->Business Intelligence->BI Integrated Planning
are very helpful. They have to set the following Jco Destinations in Web Dynpro Content Administrator:
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
And the problem was the connection to the message server. It was not possible to connect without having a Logon group assigned. This had to be done in WI4 ABAP as well as in the SLD for this system. After that assignment connection was no problem.
2. make sure you have the portal ips in your host file.
3. have they have created an account for you in client 001 of the NW04S?
4. Have they created a portal id for you and assign the portal role com.sap.ip.bi.business_planning_showcase to you?
5. have they configured the setting for starting the planning modeler (also under SPRO)..
Hope this helps. If you have more specific questions, feel free to e-mail me directly.
Mary

Similar Messages

Problems with accounting integration cProjects

Dear Sirs,
I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
The project is unknown in Accounting
Message no.
DPR_FIN_GECCO006
Diagnosis
Etc..
In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released replicated.
No company code could be determined. Message No IAOM_CPROJECTS001.
In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
Best regards,
Jørgen Ruud

Hello Jørgen,
It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
logic: CPR1 -> model order -> company code
Would you please try the note 875275, if it can help.
In case that it does not help, you can eithter use the Badi method to set it hardly, or create a customer message to let SAP check it.
name of Badi DPR_FIN_GECCO_ATTR
code like following:
      ls_attribute-data_element     = space.
      ls_attribute-value            = '1000'.
      ls_attribute-field_name_orext = 'BUKRS'.
      ls_attribute-fldname_receiver = space.
      ls_attribute-struc_name_copa = space.
      ls_attribute-field_name_copa = space.
      ls_attribute-ext_attr_name    = space.
      ls_attribute-ext_attr_value   = space.
      INSERT ls_attribute INTO TABLE ct_attributes.
regards!
Zhenbo

Status and Tracking system (STS) with BI Integrated Planning ?

Hi, is posible get some images or demo for show my clients ?
i am reading Salp Help
http://help.sap.com/saphelp_nw04s/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
and say :
You can use the BW-BPS Status and Tracking system (STS) with BI Integrated Planning. This is useful if you are already using BW-BPS with the Status and Tracking system but want to use additional functions from BI Integrated Planning.
What is additional functions from BI Integrated Planning ?
Is posible write free text in some areas for planning and option for look from high levels ?
Is posible Insert in the proces STS to "Area Manager" only for look status the Planning (open, in process or finishing) ?
General manager --> Lock when is finishing.
Area manager--> only look status the Planning ?
Submanager of area --> Responsable, Aproval, etc.
planning1
planning2
planning3
planning4
planning5
Submanager of area : Planning TOO.
Thank you ... This is important info and get some images the last version in STS working in web mode, for my client buy the product.

Hi Bala ,
Yes you can use the STS for BI IP also and you need to configure the Planning level and sub plan area and follow the steps to set up STS.
STS still has BPS flavour and can be used in IP.
Hope this helps
Raja

UC320W Problems with the dial plan

Problems with the dial plan ... There is a method to modify the External Dial Plan, we can not dial some numbers (800 XXX XXX, 115, 118, 187, etc., are special numbers in Italy), happens on FXO lines and SIP,in external.
Example: The operator enters "on any phone" 0 (for outside line) then 800 000 000,on the composition of the second 0, the phone responds "invalid number" and does not allow the call
We think it is a problem of Italy dial plan, you can change them?,
our system is configured as a region of Italy and Italy dial plan
is a known problem? you know to help me resolve it

Perfect, we wait for the update, this happens also for other special numbers (187, 191 customer service phone numbers and 118, 112, 115 emergency numbers). It happens with any line it is FXO, SIP, Shared. The problem is in the dial plan, the numbers are not included, the system does not accept them, and blocks the composition. Exists a method for change the file loaded into the configuration page "region" the system is set to Italy, I have seen that you can import the file from the computer, you can download the file "Italy", edit, and upload in the system '.
We are a telecommunications company, we install telephone systems, we would like to offer your product the 300 series our clients. We are testing in our lab your UC320W.

Problems with Personnel Cost Planning

Hi all,
i have problems with the Personnel Cost Planning specifically with the Quota planning (infotype 1019).
i save data in the infotype 1019, Quota planning, for a organizational unit and in the infotype 1005, Planned Compensation, i save data for a job (i also tried with positions), but i can't value the cost for the organizational unit.
maybe I'm missing some setting or I'm doing something wrong.
Thanks

Joanne,
Are you still having issues with BI-IP? I have been troubleshooting with the basis folks in getting BI-IP up on a new system over the last few day to a week and have now gone through the process myself whereas before I had been given a system already set up. I have enclosed some troubleshooting feedback with my counterpart in getting the system up.
What type of issue are you having?
Can the basis folks start the planning modeler or planning wizard in RSPLAN even if you can't?
1. The note mentioned above 919850 and the help documentation in SPRO under
SAP NETWEAVER->Business Intelligence->BI Integrated Planning
are very helpful. They have to set the following Jco Destinations in Web Dynpro Content Administrator:
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
And the problem was the connection to the message server. It was not possible to connect without having a Logon group assigned. This had to be done in WI4 ABAP as well as in the SLD for this system. After that assignment connection was no problem.
2. make sure you have the portal ips in your host file.
3. have they have created an account for you in client 001 of the NW04S?
4. Have they created a portal id for you and assign the portal role com.sap.ip.bi.business_planning_showcase to you?
5. have they configured the setting for starting the planning modeler (also under SPRO)..
Hope this helps. If you have more specific questions, feel free to e-mail me directly.
Mary

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

Problem with Xelsius Integration

Hi,
I have installed licenced version of Business Objects Edge Client tools and also integration kit and Xelsius. When I open the xelsius and trying to connect through manage connection - Data manager -Query As A Web service - getting problem with URL ,which URL do I need to use ?? and also I tried using SAP netweaver connection selected query and its throwing #2302 error,searched forums and found few answers for this error but still not able to fix the issue.Please let me know how to connect to xelsius to QAAWS and also to SAP netweaver connection.
Thanks in advance

Hi
#2032 can have multiple root causes. I would suggest you search on service marketplace for the error #2032 - you will find several entries. Take a look at those use cases and the corresponding solutions.
Ingo

Problems with Lync integration in App-V Package for Office 365 ProPlus

We have problems with setting Lync 2013 to automatic start after Windows start with Office 365 ProPlus App-V Package made by Office Deployment Tool. We use latest version for both (ODT and download package) at Windows 7 Enterprise 64 bit.
We have done this for Lync 2010 and also for Lync 2013 (MSI installations) and it works correctly.
User can choose to start Lync automatically, but this settings is ignored and in virtual registry is set wrong. We look for possible ways to set this by GPO (in ADMX is not this option available) by inserting in virtual registry with Package ID and user
SID in registry path.

Usually setting apps to auto start sets a registry key under HKCU\Software\Microsoft\Windows\CurrentVersion\Run, but since this registry key is inside the virtual environment, Windows does not read it at logon.
The workaround is to either set this key in the native registry (perhaps by an App-V script), or easier still, just copy the shortcut to the Start Menu\Programs\Startup folder. Since you can't really modify Office 2013 packages with the sequencer, you'd
have to add this shortcut by modifying the deployment config file.
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

BI Integration in Portal (Where to configure Port, problems with km-integr)

Hello,
I am new to BI and started to integrate BI into the portal or rather tried it.
When I open my Bex-Excel-Workbook and try to create a document (right mouse -> jump -> documents) an error occurs that the service is not reachable. This is because of an wrong port.
Could someone tell me where I can change the port that he is using when the portal is called out of excel?
Changing the port in the browser I am facing some other problems like (sorry I don't know how to translate it exactly):
Properties for the assignment couldn't be provided
Could not determinate repository for documents with this property typ
Error during open new document-dialog
Has someone an idea how to investigate this problem? could it be because of the wrong port and where to configure the port?
Thanks a lot,
Vanessa

Hi,
Please refer the below links for BI Integration in Portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
http://www.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
Hope it helps you,
Thanks & Regards,
Ravi.

Problem with ADOBE integration

Hi everyone,
I am developing simple application for ADOBE integration with webdynpro. I have installed Netweaver Developer studio 2.0.3 with Adobe designer. Previously i had NW 2.0.9 but it was sneak priview version so i can't install Adobe designer. I have also installed ACF on client machine. I have enabled Activx controls & plug-ins in Web browser. Also installed ADS on WAS. Now when i am deploying my webdynpro application on server i am getting blank screen without any PDF output. It shows a blank Box in browser. I have also checked following link for the same. But the problem remains same.
Adobe Integration - Blank Screen
So, please help me for the same.
Thanks,
Bhavik

Bhavik,
I think one of the problems you are facing is the SP3 level. I think it would be good to download the latest SP (10) from the SAP Service Marketplace, because this level contains the GA version of Web AS (including the Adobe technology) and additional fixes. SP3 was a pretty early ramp-up version.
Check the Web Dynpro integration after reinstallation and let us know if it worked.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Problem with activating integration model

When I am trying to activate an integration model, that includes a scheduling agreement (type LF), the activation isn't successfull. It isn't blocked, but it never stops.
In the screen I have a message called "determining delta model" but it never continous with executing the activation.
Does anybody know what could cause this problem?
thanks in advance
Mark Smeets

Hi,
I am facing the same problem as mentioned in the original post.
Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears. After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
I have tried following solutions mentioned in this thread.
Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out. Besides I am doing this on prduction environment and other integration models like plant etc got activated.
Please help us with this.
Regards,
Gaurav Patil

Problem with the integration with remote host.

Hi,
There are two gateways to which i need to integrate one for sending only one message and another for many. So locally its working fine but when i integrate with the remote host. The gateway2 is working fine but i have a problem in gateway1 where i send only one message. That too in browser its working fine but i am not getting the exact result in that remote systems Tomcat.
Itz giving me Error 2:load
Awaiting a reply...

Hi
I am facing a problem in integrating means i am not getting the output which i want in the logs.
But if i copy paste the parameters with url in browser it works fine.
thanks.

Problem with gross requirement planning pir is not getting reduced

Dear Gurus
I am trying to use strategy 11 for a particular finished product.(having bom and routing)
In the material master I have set mrp type pd lot size ex .strategy group 11, mixed mrp 2,item category group norm, availabilty checking group 02 .
Then I made manually pir for that material in md61 with BSF requirement type .
Then ran the mrp for that material in md02.
Planned orders came .(In md04 screen that gross requirement line text also came as usual )Converted them to prodn order and then did the gr in mb31 with 101 mvt type. After doing the gr the pir should get reduced in md04 screen which is not happening . Where I am going wrong
Regards
Sandip Sarkar

Dear Sandip Sarkar,
                                  It usually happens run MRP and ckeck.
Strategy 11 in summary :-
1. Sales Order creation - no impact.
2. Goods Receipt - minus the quantity for the oldest planned independent in demand management.
   For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
3. Delivery - no impact as delivery is issue from sales order.
This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
You need to maintain the following master data for the finished product:
Maintain strategy group 11 on the MRP screen.
Set the Mixed MRP indicator to 2 on the MRP screen.
Maintain the item category group (for example, NORM) on the Sales Organization screen.
Maintain the Availability check field so that you perform an availability check without the replenishment lead time (checking group 02 in the standard system).
Strategy                                                        10
Stock is taken into account                           Yes
reduction of planned independent
requirements takes place during u2026   u2026 goods issue for                                                                                delivery                                  order (discrete production),
11
Stock is taken into account                          No
Reduction of planned independent
requirements takes place during u2026            ... goods receipt for a production
                                                                        order (discrete production),
for a planned order (repetitive
                                                                         manufacturing), or for a purchase
                                                                         order (trading goods).
Edited by: Vachanala Rajasekhar on May 7, 2010 11:55 AM

Problems with waveform integration

What I need to do is waveform integration from an acceleration vibration signal to a velocity or displacement signal.
To take the signal to velocity, I first filter the acceleration signal (HPFilter, 5Hz) to remove any offset and the perform the integration.
To probe the method, I use a signal composed by one sine WF with amplitude 1. The test consist in vary the frequency of the sine WF and evaluate the value obtained by the FFT of the integrated signal.
For a freq of 10 Hz, i obtained a value of 0,015931 which is nearly the expected 1/(2·pi·10)=0,015916
for a freq of 150 Hz, i obtained a value of 9,8130e-4 instead of the expected 1/(2·pi·150)=1,061e-3
for a freq of 450 Hz, i obtained a value of 7,91922e-5 instead of the expected 1/(2·pi·450)=3,537e-4
as you can see, higher the frequency, higher the deviation from the expected value. i am triyng to get this solve, but in this moment i don't know why this phenomenon occur.
any help will be well recibed.
CJMV

OK, that's a really good point, i am agree with it.
do you have made a study of the relationship between the sampling frequency and the maximum frequency of the signal?.
i am going to make it anyway, but to compare...
another point related to the waveform integration:
i rote in an application note that it is recommended to use a FIR filter instead of an IIR because it has less phase distorition of the signal. however, if you ask for the filter information and plot the "phase H(w)", you will se a big distortion in phase introduced by the filter.
in the other hand, if you do the same thing with an IIR filter, you will find that the phase distortion is less.
conclusion: i am using an IIR filter with a Fc of 5 Hz.
greetings
CJMV

Problems with BI Integrated Planning

Similar Messages

Maybe you are looking for