Problems with Blackmagic Instensity shuttle

Hi. I'm using FMLE on an Apple iMac with the Blackmagic Inensity Shuttle but the software doesn't seem to recognise the stream.  The device is working as I can pick up the stream with Express, the software that ships with the Shuttle, and with Wirecast, a commercial program.  Can someone please help?

Hi,
Please see the following for device compatibility with using FMLE 3.2.
Note if not listed you may run into some issues.  If possible see if you can use the following confirmed compatible device listed below.
UnoRed - Knowledgebase - Flash Media Live Encoder 3.2 Device Compatibility
http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.0.pdf
Hope this helps!
-Sidney

Similar Messages

  • Problems with Audio with BlackMagic Intensity Shuttle

    I recently bought the BlackMagic Intensity Shuttle hoping it would work with FME so I could stream games from my Xbox/PS3.
    Everything is great with the video but the audio is the main problem. I'm having sync issues with the audio when I use the audio from the BMI Shuttle. The audio source is Decklink Audio Capture and no matter what settings I try on both the audio and video, it seems to stay out of sync.
    I capture 720p @ 59.94 fps. I've pretty much tried everything, even downgraded the drivers to each and every driver since the shuttle came out. I haven't tried downgrading FME, but I don't think that will solve anything either. Right now I have the latest FME (3.2) and I still had audio sync issues with 3.1.
    When I try to use an external program to capture video (such as VHMULTICAM), then I cannot produce the audio from FME because VHMulticam is using the video and so the Decklink Audio Capture won't respond in FME then. I don't know of a program that can capture both audio and video at the same time either.
    Just wondering to see if anyone has any suggestions or recommendations to settings or anything else. Any help is very much appreciated. Thanks!

    Well, how can I use my line in with an Xbox or PS3... or even a satellite receiver/cable box? I've also tried using analog RCA cables for audio while using HDMI for video on the shuttle but it seems as though it's the same thing. What I'm trying to ask is how can I connect it from the xbox/ps3/receiver to the pc's sound card line in?
    The audio is delayed. So, I see what happens and then hear the sound later.
    Thanks for your response btw, really appreciate it.

  • Problems with Blackmagic footage going to black

    Hello, I am experiencing a problem with my footage dropping out or going to black. It is random. Sometimes the same piece of footage works other times not. Sometimes restarting is enough, but not always. I've trashed the prefs and adjusted memory options, but the problem persists.
    I am on a 2x2.93 GHz Quad_Core Intel MacOS 10.6.4
    with 12GB 1066MHz DDR3 of Memory
    After Effects CS5 v10.0.1.19
    And I'm running off a server.
    Is anyone else having this problem?
    J

    Start up in safe boot:
    Safe Boot
    http://support.apple.com/kb/HT1455
    This forces a disk check called fsck -fy it is similar to repair disk on the disk utility. Once it has started up to your log in screen restart normally and see if that helps

  • FCP capture problem with Blackmagic Intensity Pro

    I just installed a Blackmagic Intensity Pro and I am having problems capturing in Final Cut Pro 6. I have a Sony VCR/DVD player with a HMDI out connection that works fine when connected to my TV. The video setting on the VCR/DVD are 720P. In FCP I have chosen the “Blackmagic HDTV Intensity Pro 720P 60 Uncompressed” capture/input setting. If I unplug the HDMI cable from the VCR/DVD and plug it back in I see the video for about 4 seconds and then just a gray screen. I have tried several video tapes all with the same results.
    Any suggestions?
    Dennis

    I am having the same problem. I edit reels and was trying to use the higher quality HDMI input to capture video from my DVD player for client's video reels.
    I could be mistake, but I do 'recall' hearing that you cannot record HDMI video (copyright issues) but only play back HDMI. We may be stuck using component.
    Intensity Pro's website only mentions recording HDMI video from a camcorder with an HDMI output.
    Maybe someone will clear this up for us with a definite answer. I have put a request in to Blackmagic support and will let you know what they say.
    Rob

  • Is Premiere Elements 11 compatible with Blackmagic Intensity Shuttle USB 3.0 ?

    I have an Intensity Shuttle from Blackmagic to Capture  Video and  Audio through USB 3.0
    Is this divice compatible with Premiere Elements 11 ?
    Thank you for your help

    Looking at the Blackmagic Intensity Web site for host program interaction, I only see PrPro, and not PrE. Sometimes, that does not mean that PrE cannot use a device, but often it does. http://www.blackmagicdesign.com/products/intensity/software/
    I would contact Blackmagic and inquire.
    I see that the card/device includes Blackmagic's Media Express, so it might be a simple workaround - Capture in Media Express, then Import that/those file(s) into PrE.
    Please report BM's response.
    Good luck,
    Hunt

  • Blackmagic Intensity Shuttle USB 3

    Hello,
    I just bought a subscription for Premiere Pro and am now trying to get it to work with my Blackmagic Instensity Shuttle USB 3, however I can't get PP to find my device.
    My skill in PP is about non-existant, but from what I understand it should support the Intensity Shuttle.
    Thanks for any help.
    Sincerely,
    Daniel Mårtensson

    Sorry you have not been lucky with ASUS mobos. The Rampage family are very reliable and I still have Rampage II Extreme to 4 working now
    Asus Rampage is the most used board for editing. Please stick to the Blackmagic has it is not only the inexpensive card it supports very editing
    software to date and the most updated. Call their tech support and they will stay with you until you get it running if they can work round the MSI
    However, you might not need to work with any i/o card it you don't want to. One one of my stations I have 3display monitors. 2 for editing and one
    as Premiere display monitor. You can edit red 4k, UHDV and more with no sweat now. So use the 3rd monitor as external display by setting it up in prefernces
    as attached

  • FMLE and 50fps with BlackMagic devices

    FMLE seems to be missing the possibility for 50fps There is a 60, 59.94, 30...fps setting - no 50 fps.
    BM settings (fx DeskLinDuo or Intensity Shuttle) allow me to choose 720p50 - but it is reset to 59.94 every time.
    25fps doesn't work either.
    Must be a missing setting in FMLE. Can't find it with a webcam either.
    How can I fix that?
    Thank You
    Frank

    Seems, FMLE doesnot support Europe 50fps standart at all. Neither 1080i/50 (work when capturing 25fps) nor 720p/50. I'm using Canon XHG1 cameras, which can produce only 1080i/50 fps and JVCs ProHD 251 whis are 720p/50.
    The solution is to use osprey 700 HD capture card, which can hardware reencode to desireable screen size and bitrate (I'm able to stream 720p/50 feed to 720p/25 encoded stream). But they are too expensive.
    With DeckLink SDI capture cards I can only stream 1080i/50 feed capturing 1080i/25 fps (somehow, this encoding preset works). But I have to software deinterlace, so picture quality degrades.
    PS: When I'm using Canon XHG1s, I want to cross convert 1080i/50 feed with blackmagic updowncross mini converter to more affordable 720p/50 feed, which have no deinterlace nightmare.. But this stream I can't capture and stream.
    There is no problems with "NTSC" cameras - 60/30 fps.

  • Problems with HDV footage from sony HDR - HC9

    I have a new sony HDR-HC9 cam corder. I want to shoot in hi def (HDV) format for best quality, but I produce standard def DVDs as a finished product. I was hoping to use the built in iLink conversion from HDV to DV when downloading to the computer into iMovie. I have had many problems with this.
    Usually, when I set it up to do the downconversion, I see a blue screen in iMovie, although iMovie will ff and rew the camera, no images come across. I experimented with setting the camera in DV record mode at the same time as I had the iLink down conversion set, and this appeared to work. I started downloading an hour tape, and when I came back 65minutes later (after it should have been done), saw the message that iMovie had quit. Reopened the project, and saw an hour worth of footage in the trash, but it was too crazy to reorder the clips from the trash back to the clips pane.
    I resigned to import in hdv (1080i) format and not mess with hardware downconversion. This worked fine. I then added some chapter markers and shared the project with iDVD. I saved the project as an image file and then mounted it to check it for errors. The video was OK, but towards the end of the project, the sound was out of sync by a few seconds with the video.
    I deleted encoded assets from the iDVD project, then reburned (save as image file). Same defect.
    I then started a new iMovie project in standard DV widescreen, and dragged all of the clips from the HDV (1080i) project into the time line. It took over an hour for my mac mini to run the conversion, but the movie in iMovie appeared OK. I redid the iDVD project, and saved as image file. It appears to have worked correctly (although I have not looked at it on my widescreen TV yet to assess image quality.
    Questions:
    1) Has anyone had any luck getting HDR-HC9 iLink HDV-DV hardware conversion to work with iMovie, consistently?
    2) Can anyone comment on image quality issues with converting HDV to DV footage using iMovie software.
    3) Has anyone seen audio sync problems with iDVD from HDV original footage.
    Thanks

    Hi - you may get a more exact answer in the BlackMagic Macintosh forum, since there aren't a lot of BlackMagic queries on the Apple Discussions forums:
    http://forum.blackmagicdesign.com/viewforum.php?f=11

  • Problems with VTR Panasonic

    Hello, I have some problems with this configuration:
    - HP Workstation Z-420 (Windows 7)
    - Blackmagic DeckLink Extreme 4K (drivers 10.3.4)
    - VTR Panasonic AJ-D850
    - Premiere Pro CC 2014.1
    When I export the clip to tape, it doesn't record audio but in Premiere I see the output of modulation. 
    Another problem is that when I capture I hear a noise and this noise is not in the dvcpro.
    I've looked all audio options Premiere but I have not solved the problem.
    Does it exist any configuration or method to solve the problem? Maybe my video card is not Compatible with VTR and Premiere?
    Thank you very much.

    Hello, I get the solution!
    I have deactivated blackmagic card in Windows audio panel. It's strange but now It is working fine. Thank you.

  • Problem with temporary table refresh

    Hi,
    I running a process before validation on a page to populate a temporary table when I click a button.
    On the following page I've built a shuttle on the temporary table. Not the most elegant solution, but the shuttle LOV box wouldn't process the oracle text commands in the SQL.
    I'm not getting any error, but I have an unusual problem
    It takes two passes for the data to be replaced. i.e I enter 'ABCD' in the filter and it returns data with 'ABCD'
    If I return to the page and change the filter to 'EFGH' I still get 'ABCD'. I return to the page and click the button again and I get 'EFGH' results
    I've checked the data in the temporay table and that is updating in line with the problem.
    I've looked at the debug and that seems fine (i.e I can see the changed filter value), I've tried moving the truncate to a different process, that didn't help.
    I've run it in SQL developer and it seems to work fine.
    I've included the code below, but I can't see a problem with it.
    Can anybody help?
    begin
    EXECUTE IMMEDIATE('TRUNCATE TABLE temp_cat');
    commit;
    if length(:P26_ADD_FILTER) > 0 then
    insert into temp_cat (core_cat_id, core_cat_code, core_cat_desc)
    select core_cat_id,core_cat_code,core_cat_desc from core_cat where CONTAINS (core_cat_desc, '
    <query>
    <textquery lang="ENGLISH" grammar="CONTEXT">&P26_ADD_FILTER.
    <progression>
    <seq><rewrite>transform((TOKENS, "{", "}", " "))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", " ; "))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", "AND"))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", "ACCUM"))</rewrite></seq>
    </progression>
    </textquery>
    <score datatype="INTEGER" algorithm="COUNT"/>
    </query>')>0 and core_cat_id not in (select pipe_project_cat.core_cat_id from pipe_project_cat where txtpamref = :p26_pamref);
    else
    insert into temp_cat (core_cat_id, core_cat_code, core_cat_desc)
    select core_cat_id,core_cat_code,core_cat_desc from core_cat where
    core_cat_id not in (select pipe_project_cat.core_cat_id from pipe_project_cat where txtpamref = :p26_pamref);
    end if;
    end;

    Hi,
    Apex does not work well with temporary tables as you cannot guarantee which session from the pool will be used to serve each page.
    In your case, it looks like the second page is using temporary data from the wrong session.
    Have you considered using Apex Collections instead?
    Luis

  • R7970 problem with temperature sensor?

    So last month I RMA'd my R7970 and I just received it in the mail. Originally my problem was I had artifacting lines, and occasionally freezes. In the time between that I had ordered a 5450 just as a temporary card.
    When I got my 7970 back I removed the 5450 and placed the 7970 in its place. However after booting up my computer the fans started going on max speed every few seconds while online. I looked at the temperature according to afterburner and it says its at 70c where my previous card was probably around 50 during normal use. I tried playing skyrim but it's not the funnest thing to play when you have the sound of a fan blowing at 50 mph. And while playing this the temperature went up to ~95c
    The reason I'm thinking theres a problem with the censor is that I felt the exhaust from the pci slot and though it was warm, it was not 95 degrees of hot. I turned off the computer and took out the graphics card and placed it back in thinking that was the problem but its still just as loud. I figured I'd post here first and see if maybe I did something wrong before contacting MSI directly.
    My specs are:
    CPU: AMD 8350
    mobo: gigabyte ga 990 fxa ud3
    gpu: R7970-2PMD3GD5
    psu: corsair cx 750
    ram: gskill 16gb ddr3 1600(?)mhz

    Hi I've replaced  the paste on two msi 7870 as they do an awfull job of applying by putting about six times to much on. I used a Noctua NT H1 non conductive paste just a very tiny pea size and the temps have dropped by 10%c on both cards. They are now in crossfire mode and pretty quiet although obviously they run hotter in crossfire mode but max out at 65%c. I had to RMA one of these cards just two weeks ago as the temp diode set the fan at full speed once it hit about 60%c which was intolerable as I expect yours is. They sent me a replacement card and didn't query that I had broken the warranty seal when I replaced the thermal paste. I'm surprised at how hot your 7970 gets although I've never used one is that normal for this card, is it in a decent sized case, is something stopping one of the fans from moving eg a power wire etc. sounds silly but I had this problem with a small form shuttle a motherboard wire had to be reouted on a twin fan card for that reason. Hope you get it sorted

  • Problem with removing spaces

    Hi,
    I have a problem with spaces. There are constantly two spaces open named Safari. I cannot remove them. See enclosed image. Any ideas how to do it?

    Further research shows that the spaces are indeed there when I view the page source; however, the spaces are not being rendered.
    I removed the css style sheet that was being applied to the shuttle and it made no difference.

  • Blackmagic Intensity Shuttle Thunderbolt

    Hello
    Does anybody have experience with the Blackmagic Intensity Shuttle Thunderbolt working with Final Cut Pro X
    as opposed to older versions of FCP.
    I wish to capture live/direct video from a HD HDMI panasonic camera using FCPX.
    Will the Blackmagic Intensity Shuttle Thunderbolt do the job?
    I have a MacBook Pro retina display 2012 (software is all up to date).
    All feedback welcome
    Thank you and happy new year
    kreid4.

    Had a look at the thread to get on the pace.
    Just tested mine and it works.
    About the gear used in this test:
    Macbook Pro 17" late 2011, OS 10.8.2 using the Thunderbolt port.
    Black Magic Intensity Extreme using BM Media Express V3.2.
    Apple Thunderbolt cable.
    Panasonic HDC-SDT750 set to 1920 x 1080i50.
    HDMI cable mini to standard cable.
    I've noticed that all connections should be made before opening the BM capture app or it's not recognized by BM Media Express. This applies the BM box rather than the camera.
    Open the BM app and confirm from the Cascade Menu under DEVICE that there is a check mark against the model you use. Mine is Intensity Extreme with the tick indicating the device and the BM software are communicating.
    Now setup your Media Express>Preferences to suit the camera and capture codec etc.
    Note: If you don't see a bunch of options in the Project & Capture format fields to match your computers stuff then something is amiss.
    Also you can check the MAC>System Profiler>Thunderbolt to ensure the computer is seeing the BM device.
    Connect the camera and HDMI cable at this point if it's not already and switch on.
    I'd suggest making all connections before starting.
    Log and Capture in the BM software window should display whatever the camera sees.
    You can either live capture or capture pre-recoreded clips as desired.
    Hope this steers you in the right direction.
    Al

  • Two problems with SelectManyShuttle

    Hi,
    I've been trying to implement a SelectManyShuttle to edit a detail table in a master-detail relationshiop, mostly adapting code from the example in FOD (user/customer interests).
    The page has a tree for the master table and the shuttle for the detail table.
    I managed to write the method (in AppModuleImpl.java) that adds/deletes the detail rows in the database and it works, however I'm stuck with two major problems:
    1) when I select a master row in the tree, the shuttle doesn't update even if the tree is set as PartialTrigger for the shuttle.
    This is because the backing bean logic to define the selected values list in the shuttle is as follows:
      public List getSelectedValues() {
        if (selectedValues == null) {
            selectedValues =
                ADFUtils.attributeListForIterator("ParTipoView3Iterator", "IdParametro");
        return selectedValues;
      }but when I select a master row in the tree this accessor gets invoked twice, one when the old master row is still "selected", the second time with the updated master row. That means that during the first invocation, the old detail rows are read from the iterator and saved and the second time they're not overwritten, so in fact the shuttle selected values never update.
    Removing the condition (selectedValues == null) won't work - that way all editings made by the user are lost when invoking the method that saves to the rowset (not to mention that all examples I've seen build the list as I do).
    Some idea on how to actually make this work?
    Maybe I should force a refresh of selectedValues on some tree event, but the tree itself apparently gets initialized twice - setTree1 on the backing bean gets called twice.
    2) another problem is that the shuttle seems to refuse to accept an empty selected values list. When I invoke my own custom "save to DB" method on the datacontrol, the shuttle correctly passes a List<Number> with the keys of the selected rows, however when I remove all elements (either one by one or through the "remove all" button) from the selected values list the list passed is not empty but it gets reset to the initial list the shuttle had upon loading.
    E.g. you start with 3 elements selected, it returns a list of 3 keys, you remove one, you get a list with 2 elements, you remove another, you get a single-element list, then you remove the last... and you get a list with 3 elements instead of an empty list. The shuttle has Required = false (the default), so I believe this may be a bug. Or is it a known limitation of the component?
    For completeness, here's the shuttle definition:
    <af:selectManyShuttle label="Parametri"
                          binding="#{backingBeanScope.backing_untitled1.selectManyShuttle1}"
                          id="selectManyShuttle1"
                          value="#{backingBeanScope.backing_untitled1.selectedValues}"
                          partialTriggers="tree1">
        <f:selectItems value="#{backingBeanScope.backing_untitled1.allItems}"
                       binding="#{backingBeanScope.backing_untitled1.selectItems1}"
                       id="selectItems1"/>
    </af:selectManyShuttle>thanks in advance,
    RickyS

    Hi Frank,
    ok I was hoping for something cleaner than a quick workaround to issue 1, but hey, I just took your suggestion and let the List be initialized twice... It seems to work.
    As for issue 2, I'm afraid it's confirmed in every possible way. It appears in my test-project with a pageflow bean, and I also managed to reproduce it in FOD which uses a session bean for the job.
    To reproduce in FOD, login as ngreenbe and edit your profile adding a couple interests, then save (both the selected list and then the page): the 2 rows are created successfully in CUSTOMER_INTERESTS. If you remove one and save, it also works. But if you remove the last entry from the shuttle and save, it doesn't work. That is, it seems selectedValues as passed by the shuttle is never empty when nothing is selected.
    Now, since I'm quite sure this is a bug, how should I proceed to get this thing reported and hopefully fixed?
    This single issue alone renders the whole SelectManyShuttle kinda useless for us, as in our scenario basically all uses require it to allow an empty selected list - users can definitely remove all the children of a parent row without removing the parent row (otherwise the "Remove all" button in the shuttle itself would be pointless...).
    RickyS

  • Apple Uncompressed with BlackMagic codec installed

    We have a problem with files that are in the Apple Uncompressed codec when the Black Magic codec is installed and wonder if someone here has experienced that?
    With QT Player the movies plays fine but the name of the codec is empty in the info window. The sentence look like this:
    ", 720x576..." when it should say "Uncompressed 8-bit 4:2:2, 720x576...".
    We tried to enter the Metadata information with a QT developer tool (Dumpster) and the info displays correctly in the info panel inside QT Player.
    This doesn't make it better in Shake though, where we must enable "Force8bit" in the FileIn-node. If we don't do that we end up with a black picture or on some computers a perfect noise with some shades of contours.
    If we uninstall the Black Magic codec we get the perfect picture in Shake but still the meta data is gone inside QT Player. We have also tried old versions of the Black Magic codec, even that old we had to flash the cards with old firmware so everything looks to point toward some QuickTime or System update. The files worked fine in november and hasn't been touched or moved since.
    Anyone seen this?
    Both PPC and Intels   Mac OS X (10.4.8)   Lates updates of everything

    Yes, there seems to be an issue with blackmagic codecs and shake.
    On our PowerPC computers, removing the blackmagic codec from the quicktime folder seemed to solve the problem.
    But on our Intel machines, nothing seems to fix it. 8 bit footage always has digital noise. If you click the force 8bit button, it looks fine. But when rendered out using a third party plugin (The Foundry's Furnace plugins) the noise comes back.
    HELP Apple and/or Black Magic!!!!

Maybe you are looking for