Problems with blending modes

Hi,
I have a layer with a solid color (212º,93,78) on top of which I have another layer with a solid color (205º,100,74). Call this second layer the blend layer. I then choose for it a blending mode of Color, and the resulting color in the top layer is (205º,100, 74). If instead I choose the luminosity blending mode, the resulting color in the top layer is (212º,93,78).
---all these are HSB coordinates.
According to the documentation. color and luminosity blending modes should behave differently:
Color
Creates a result color with the luminance of the base color and the hue and saturation of the blend color. This preserves the gray levels in the image and is useful for coloring monochrome images and for tinting color images.
------ the luminance of the base color is 78 (at least the brightness anyway - I know of no method to get the luminance)
Luminosity
Creates a result color with the hue and saturation of the base color and the luminance of the blend color. This mode creates the inverse effect of Color mode.
------- in this case everything is equal, which seems to me is not right.
Some light?
Juan Dent

Generally speaking, Photoshop works fine with Windows 8 but the display drivers aren't all up to the task yet, and Photoshop uses the GPU for a lot of stuff.
What video card do you have?
You might find you can go into Edit - Preferences - Performance in Photoshop and disable the usage of GPU (the setting is called [ ] Use Graphics Processor in Photoshop CS6, and [ ] Enable OpenGL Drawing in earlier versions). It's also possible that you might find things to work better if you leve the GPU enabled but change the advanced mode for it to a lower setting, such as Basic.
In a general answer to your question, yes, I imagine there will be updates through Windows Update and from Adobe that will correct the problems. You may be able to accelerate the fix by visiting the web site of the maker of your video card and downloading their recent driver release (though I caution against this with ATI drivers right now - their latest aren't really too good).
-Noel

Similar Messages

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

Layered image with blending mode won't display properly in Indesign CS3

Hello,
I'm having trouble placing a layered psd and/or tiff with blending modes into my indesign cs3 document. Basically I have a flattened image with a shadow on a white background. I've had to doctor the image a bit in photoshop and I've used the multiply blending mode to remove the white background. (I'm trying to get around having to clip the image and having to recreate the shadow). Anyone know how I can drop my layered image into indesign and have it keep the blending modes I've applied in photoshop?
Any help would be much appreciated.

I'll try and do my best to describe what it is I'm doing.
I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
Hope that make sense?

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

Aliased text on PDF export with blending modes

So I've had this issue with a pdf, I tried to export it CMYK, RVB, interactive pdf, regular pdf, with tons of different other options, the text was still very aliased.
I decided to take it back from scratch, openned a new document with the same size, and copied/pasted element after element from the old one to the new one, exporting as pdf between each copy/paste. The first exports went really well, the render was great… until I pasted a vector element that was applied with a blending mode (overlay).
When I switched it to normal, the pdf export was smooth again. Tried every blending mode, everyone makes the text jaggy. Switch back, it's ok. So I'm 100% sure that this comes from blending modes, as opposed to what I could have read on other forums.
This is a request, please, InDesign team, take care of this problem, this is quite annoying in many cases.
Thank you for your attention!
Twitted here as well : https://twitter.com/grinderlabs/status/448381486627311616

To minmize the possibility of rasterizing or outlining text when transparency is flattened, keep the text above any transparent objects. Blending modes, along with most effects, use transparency.
You can also minimize the risk by exporting the PDF with live transparency, which is supported in Acrobat 5 or higher compatibility.

Creating shapes with blend modes in actionscript 3

Ok I'm having a lot of trouble with ActionScript 3. I'm supposed to make five buttons that when clicked show a different blend mode using 2 or more shapes. Each of these blend modes also has to have a text box explaining what the blend mode does. The assignment requires only one layer which is the actions layer. Everything has to be made using script only, which is why I'm having so many problems.
Can someone please help me with this and simplify it has much as possible. I need to have some sort of answer sometime tomorrow. I thank anyone who helps.
I have this code so far.
import flash.text.TextField;
import flash.text.TextFormat;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.MouseEvent;
import flash.display.Shape;
//create button instances
var btn:darkBtn = new darkBtn;
var btn2:invertBtn = new invertBtn;
var btn3:overBtn = new overBtn;
var btn4:screenBtn = new screenBtn;
var btn5:subBtn = new subBtn;
//add our interface objects to the main display list
addChild(btn);
addChild(btn2);
addChild(btn3);
addChild(btn4);
addChild(btn5);
//button positions
btn.x = 12;
btn.y = 395;
btn2.x = 131;
btn2.y = 395;
btn3.x = 250;
btn3.y = 395;
btn4.x = 367;
btn4.y = 395;
btn5.x = 485;
btn5.y = 395;
//create a new font
var mainFont = new GeorgiaRegular();
//create a new text format object
var mainFormat:TextFormat = new TextFormat();
mainFormat.size = 18;
mainFormat.leading = 4.5;
mainFormat.font = mainFont.fontName;
mainFormat.kerning = true;
//create text field copy
var mainTxt:TextField = new TextField;
mainTxt.x = 307;
mainTxt.y = 182;
mainTxt.width = 221;
mainTxt.height = 333;
mainTxt.multiline = true;
mainTxt.wordWrap = true;
mainTxt.defaultTextFormat = mainFormat;
mainTxt.autoSize = TextFieldAutoSize.LEFT;
mainTxt.embedFonts = true;
//create a URLLoader object
var textLoad:URLLoader = new URLLoader;
//create a new URLRequest
var darkReq:URLRequest = new URLRequest ("text/dark.txt");
var invertReq:URLRequest = new URLRequest ("text/invert.txt");
var overReq:URLRequest = new URLRequest ("text/over.txt");
var screenReq:URLRequest = new URLRequest ("text/screen.txt");
var subReq:URLRequest = new URLRequest ("text/sub.txt");
//test to see that the external file has completely loaded
//once it has executed the function that will add the loaded content
//to our dynamic text field
textLoad.addEventListener(Event.COMPLETE, textComplete);
//function to execute once the external data is loaded;
//adds the external file data (the actual text) to our text field
function textComplete(event:Event):void
mainTxt.text = event.target.data;
//create a new shape object
var sq:Shape = new Shape();
//use the lineStyle method of the graphics object to
//set the line thickness and color
sq.graphics.lineStyle(2, 0x000000);
//use the beginFill method to fill the shape
//with the specified color
sq.graphics.beginFill(0xFF86600);
//use the drawRect method to draw a rectangle
sq.graphics.drawRect(175, 100, 100, 100);
//use the endFill method to end the fill of the shape
sq.graphics.endFill();
//add our shaped to the display list
addChild(sq);
//create a new shape object
var circ:Shape = new Shape();
//use the lineStyle method of the graphics object to
//set the line thickness adn color
circ.graphics.lineStyle(2, 0x000000);
//use the beginFill method to fill the shape
//with the specified color
circ.graphics.beginFill(0xFF9900);
//use the drawCircle method to draw a circle
circ.graphics.drawCircle(150, 150, 85);
//use the endFill method to end the fill of the shape
circ.graphics.endFill();
//add our shape to the display list
addChild(circ);
//apply a blend mode to the circle
circ.blendMode = BlendMode.MULTIPLY;
//create a display object container
var contentContainer:Sprite = new Sprite;
addChild(contentContainer);
contentContainer.x = 10;
contentContainer.y = 24;
contentContainer.width = 1000;
contentContainer.height = 725;
//set initial page
contentContainer.addChild(mainTxt);
textLoad.load(darkReq);

blendModes can only be applied to DisplayObjects (Sprites, MovieClips, Bitmaps etc)
For an example how to get it working:
DisplayObject - Adobe ActionScript® 3 (AS3 ) API Reference

Fireworks PNG - FXG - FC. It Works! With Blend modes!=)

but it has some isues...
1) blend modes problem: if you put on object some COLOR BURN IT READS IT AS blendMode="-1" and you get picture of blanc screen and library of empty groups and so on. the point is it does not work... (so if you had any powers to edit the code you might solve the problen)
2) if it has any style on the object it turns it into a bit map...
3) no round corners transport
but ewerething else is great... with help of fb then it can be turned into a sweet candy
>sory for my EN_

0) Once like this?
FW is not open source and is not free for use so
1)Who will be paying me for such stuff ?
2)How much(or will be giving me what)?

Problem with "find" mode in adf/swing application

Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.

Hi Frank, please look this issue

Having problem with blending arcs together

Hi Jochen!
I'm developing a 3-axis plasma cutter software. It's uses g-codes for calculating the path of motions and using blend function for continous moves. Everything works fine including continously blending short straight line moves, but sometimes blending arcs resulting high following error. Mainly when i try to blend little arc segment with a big one. This problem doesn't occur when i set blend factor to 0. I tried many different trajectory and arc parameters with the "Sequence of Blended Lines and Arcs.vi" example, but it resulted the same effect. With some trajectory parameters i can blend the short arc segment with the big one without following errors, but i still don't know what causes this problem. This situation is same on two different cnc machine. One of them is using 1 servo and 2 stepper axis in closed loop with different encoder resolutions. The other one is using 3 stepper axis with different step/rev in open loop. The effect is the same. Blending little arc with a big one (approximately r1:r2=1:8), resulting following error and the motors jumps a little.
- PCI-7340, umi-7774
- LabView 8.5, Motion 7.6
Waiting for hints! Thank you!

Nandi,
sorry for the late response, but I have had to gather some equipment first to reproduce this behavior. I have setup a very similar system with a servo and a closed loop stepper and I have used your code for a test.
The bad news is, that I couldn't reproduce the problem. First I have worked with two servos but I couldn't see a significant following error with those, but in fact I wouldn't have expected a sustaining following error with a servo at all, as servos can compensate following errors during the moves.
In a next step I have used a servo and a closed loop stepper but I have seen the same result. No significant following error during the move. I have also switched the X and Y axes, but there was no change. I have also played around with the other move parameters but again, no significant following error.
With this said, I don't think that we are facing a general issue here that is related to 73xx motion control boards.
To me this looks more like an issue that is related to problems with load inertia and high acceleration values. In fact if you reduce the radius of an arc but keep the vector speed, the forces become higher and in your case they seem to become too high for the stepper motors. A stepper motor can't compensate step loss during the move. That's why you see this constant following error.
I hope this analysis hits the bull's eye.
Kind regards,
Jochen

Problem with sleep mode in Win 7

Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)

Before you continue to wait for solution and waste your time back-up all your important data and reinstall OS again using HDD recovery installation - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
After doing this you will have clean preinstalled and well working OS again.
The first thing you should do after OS installation is to disable automatic Windows update. Do it manually and install important updates only.

Problems with landscape mode

Hi,
I've a problem with my iPhone 3G. In apps like notes, sms or even ipod, it doesn't rotate in landscape mode. But in "not apple apps" the accelerometer is working. I've tested it with Labyrinth LE.
After restoring the device it doesn't rotate too.

I have the same problem.
Apple apps (Mail, Safari, Calculator) don't rotate at all (portrait only). They were rotating correctly before.
3rd party apps (Labyrinth, BubbleLevel, Accelerometer Graph) can rotate to portrait and landscape correctly, so this shouldn't be a hardware problem.
Maybe caused by OS update?

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

Problem with append mode in WS_DOWNLOAD

Hi everybody
I have a problem with downloading two internal tables in one excel sheet.
I am Using FM - WS_DOWNLOAD , MODE = 'A' .
I want to append one IT after another .
But I am getting only the second one ...
MODE - A is for append , correct?
Any clou?
I allready sow all the posts on the forum

hi
good
go through this and use accordingly.
Often we face situations where we need to download internal table contents onto an Excel sheet. We are familiar with the function module WS_DOWNLOAD. Though this function module downloads the contents onto the Excel sheet, there cannot be any column headings or we cannot differentiate the primary keys just by seeing the Excel sheet.
For this purpose, we can use the function module XXL_FULL_API. The Excel sheet which is generated by this function module contains the column headings and the key columns are highlighted with a different color. Other options that are available with this function module are we can swap two columns or supress a field from displaying on the Excel sheet. The simple code for the usage of this function module is given below.
Program code :
REPORT Excel.
TABLES:
sflight.
header data................................
DATA :
header1 LIKE gxxlt_p-text VALUE 'Suresh',
header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
Internal table for holding the SFLIGHT data
DATA BEGIN OF t_sflight OCCURS 0.
        INCLUDE STRUCTURE sflight.
DATA END   OF t_sflight.
Internal table for holding the horizontal key.
DATA BEGIN OF t_hkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_h.
DATA END   OF t_hkey .
Internal table for holding the vertical key.
DATA BEGIN OF t_vkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_v.
DATA END   OF t_vkey .
Internal table for holding the online text....
DATA BEGIN OF t_online OCCURS 0.
        INCLUDE STRUCTURE gxxlt_o.
DATA END   OF t_online.
Internal table to hold print text.............
DATA BEGIN OF t_print OCCURS 0.
        INCLUDE STRUCTURE gxxlt_p.
DATA END   OF t_print.
Internal table to hold SEMA data..............
DATA BEGIN OF t_sema OCCURS 0.
        INCLUDE STRUCTURE gxxlt_s.
DATA END   OF t_sema.
Retreiving data from sflight.
SELECT * FROM sflight
         INTO TABLE t_sflight.
Text which will be displayed online is declared here....
t_online-line_no    = '1'.
t_online-info_name = 'Created by'.
t_online-info_value = 'SURESH KUMAR PARVATHANENI'.
APPEND t_online.
Text which will be printed out..........................
t_print-hf     = 'H'.
t_print-lcr    = 'L'.
t_print-line_no = '1'.
t_print-text   = 'This is the header'.
APPEND t_print.
t_print-hf     = 'F'.
t_print-lcr    = 'C'.
t_print-line_no = '1'.
t_print-text   = 'This is the footer'.
APPEND t_print.
Defining the vertical key columns.......
t_vkey-col_no   = '1'.
t_vkey-col_name = 'MANDT'.
APPEND t_vkey.
t_vkey-col_no   = '2'.
t_vkey-col_name = 'CARRID'.
APPEND t_vkey.
t_vkey-col_no   = '3'.
t_vkey-col_name = 'CONNID'.
APPEND t_vkey.
t_vkey-col_no   = '4'.
t_vkey-col_name = 'FLDATE'.
APPEND t_vkey.
Header text for the data columns................
t_hkey-row_no = '1'.
t_hkey-col_no = 1.
t_hkey-col_name = 'PRICE'.
APPEND t_hkey.
t_hkey-col_no = 2.
t_hkey-col_name = 'CURRENCY'.
APPEND t_hkey.
t_hkey-col_no = 3.
t_hkey-col_name = 'PLANETYPE'.
APPEND t_hkey.
t_hkey-col_no = 4.
t_hkey-col_name = 'SEATSMAX'.
APPEND t_hkey.
t_hkey-col_no = 5.
t_hkey-col_name = 'SEATSOCC'.
APPEND t_hkey.
t_hkey-col_no = 6.
t_hkey-col_name = 'PAYMENTSUM'.
APPEND t_hkey.
populating the SEMA data..........................
t_sema-col_no = 1.
t_sema-col_typ = 'STR'.
t_sema-col_ops = 'DFT'.
APPEND t_sema.
t_sema-col_no = 2.
APPEND t_sema.
t_sema-col_no = 3.
APPEND t_sema.
t_sema-col_no = 4.
APPEND t_sema.
t_sema-col_no = 5.
APPEND t_sema.
t_sema-col_no = 6.
APPEND t_sema.
t_sema-col_no = 7.
APPEND t_sema.
t_sema-col_no = 8.
APPEND t_sema.
t_sema-col_no = 9.
APPEND t_sema.
t_sema-col_no = 10.
t_sema-col_typ = 'NUM'.
t_sema-col_ops = 'ADD'.
APPEND t_sema.
CALL FUNCTION 'XXL_FULL_API'
EXPORTING
DATA_ENDING_AT          = 54
DATA_STARTING_AT        = 5
   filename                = 'TESTFILE'
   header_1                = header1
   header_2                = header2
   no_dialog               = 'X'
   no_start                = ' '
    n_att_cols              = 6
    n_hrz_keys              = 1
    n_vrt_keys              = 4
   sema_type               = 'X'
SO_TITLE                = ' '
TABLES
    data                    = t_sflight
    hkey                    = t_hkey
    online_text             = t_online
    print_text              = t_print
    sema                    = t_sema
    vkey                    = t_vkey
EXCEPTIONS
   cancelled_by_user       = 1
   data_too_big            = 2
   dim_mismatch_data       = 3
   dim_mismatch_sema       = 4
   dim_mismatch_vkey       = 5
   error_in_hkey           = 6
   error_in_sema           = 7
   file_open_error         = 8
   file_write_error        = 9
   inv_data_range          = 10
   inv_winsys              = 11
   inv_xxl                 = 12
   OTHERS                  = 13
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
thanks
mrutyun^

Problems with blending modes

Similar Messages

Maybe you are looking for