Problems with bluetooth after 2.01 installation

I had a clean upgrade to 2.01 last night, but discovered this morning that my phone will no longer pair with any bluetooth devices that it did before the upgrade.
I've tried removing the devices and re-adding them, but this still doesn't fix the problem.
Has anyone else had this problem? Does anyone have any solutions?
Thanks!

I just updated to 2.0.1 and now the App Store is in a different language and I cannot purchase any apps. I will check my bluetooth when I get home.

Similar Messages

  • Serious problem with bluetooth after upgrade to iOS6.1

    After upgrading to iOS 6.1 I have found serious problems with bluetooth, now I can not see the other iphone and vice versa.
    Someone has the same problem?
    Why Apple continues to restrict bluetooth functions?

    Hi,
    Thanks for your answer. Yes I've checked parameters modification and SPICBOOKING is "well" launched but it produces no results, so I guess there are some other changes in dimension customizing of AccountL or Datasrc....by the moment I'm testing but with no luck. This happens when you are about to go live and decide to upgrade your system.... 

  • Problem with bluetooth after downgrade Vista - XP

    I've maked downgrade, but I have got a problem with bluetooth. System shown my new device, but it look for driver. I have downloaded it from http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67782 but its wrong. The file name is 68bt02ww.exe
    My notebook id Lenovo 3000 N200
    Does anybody know where can I find the correct driver?

        Thank you for testing this out, rabshm. If you go to Settings>Bluetooth>Paired Devices>and select the Settings/cog wheel> You will see a series of configuration options for Bluetooth services. Try disabling them all, and start testing by turning on one setting at a time. See if there is a conflict with the incoming messages.
    Let us know if this helps.
    Thank you, rabshm
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

    Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

    At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

  • Problems with FCP after Snow Leopard Installation

    I'm editing canon 5d footage in FCP. I use MPEG Streamclip to properly convert the footage before importing to fcp. Everything was working absolutely fine until I installed snow leopard.  Now, all of the clips in the timeline have those weird lines as if I imported the footage without converting it.  I have a deadline and if I have to re-edit this entire project it's not going to be pretty.  I have installed all of the updates for FCP and Snow Leopard.  I tried a test by creating a new batch in MPEG streamclip and the footage is fine. It appears that I might have to re-edit everything.   Can someone PLEASE offer some assistance?  I can't afford to re-edit this project.
    Thank you

    Yes... I am aware of the canon plug in for converting 5d/7d footage.  I either use that plug in or MPEG stream clip and they both have been working fine.   "Properly" meaning... FCP does not recognize H.264 (5d and 7d) therefor we need to convert the video using either MPEG stream clip or the free canon plug in.  The best codec to edit this footage is ProRes 422LT  ProRes422 - I only use the 5d and or 7d cameras for my projects and have been editing this way for some time without any problems what so ever.  The problems immediately arose after upgrading to Snow Leopard. The problem lies in my EXISTING FCP projects that are already in the works.  I am still able to convert footage for new projects without a problem.  I am using the latest updated versions of SL and FCP. I did the following to trouble shoot:
    1. Did a clean reinstall of FCP - STILL HAPPENING
    2. On an existing project I deleted a few of the problem clips.  Took the original and converted it again using MPEG Stream clip.  Renamed it and from the FCP project, I located the new clip.  SAME PROBLEM
    3. On an existing project, I deleted a few of the clips completely. Converted the original again using MPEG SC.  Imported the entire new clip in FCP, re-edited it and dragged it into the time line.  NO PROBLEM WORKS FINE
    4. Opened a new project in FCP.   Took some of the original problematic clips.  Converted them using MPEG SC. Dragged into the timeline.  NO PROBLEM, WORKS FINE
    5. Played both the original clips (before conversion) and the converted clips in Quick Time - NO PROBLEM WORKS FINE
    6.  Exported part of a problematic project to Quick Time - NO PROBLEM WORKS FINE
    7. Opened up one of the same projects from the same hard drive on my other mac (Mac Book Pro) and there are NO PROBLEMS.  THEY WORK FINE
    Based on everything I've listed above, the problem seems to be happening in the Viewer  and Canvas on my I-Mac which I just upgraded to Snow Leopard.  The exported projects are fine.  Am I to assume that I should continue working with these existing projects and everything will be fine?  I've spoke to 5 or 6 friends that are experienced and no one can come up with an answer. 

  • Problems with Bluetooth after upgrading to Lion?

    I just upgraded to Lion and now when I plug my cinema display onto my MacBook bluetooth shows as unavailable. Sometimes it stops the trackpad working too. I took it into Regent Street Apple Store and the same thing happened there, they seem to think it's a software bug.

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Problems with exporting after Facebook export installation

    Hi there,
    I installed the Facebook exporter app and then discovered my iPhoto is too old (it is iPhoto 4). Thereafter I was unable to export anything because my mac would crash. So I uninstalled the app and since then my normal export button is missing. I found a forum on this site, where the same problem was solved, but this was for someone with iLife 08 and required a reinstallation from disk.
    The problem is, I bought OS X 10.5 recently but not iLife, so my iPhoto etc is from the old days. I would be totally, infinitely and unbelievably grateful if someone could help me out here, because I currently cannot export anything from iPhoto. Which disk do I use for reinstallation? When I bought my mac it had 10.3 on it. How do I reinstall iPhoto when my operating system is new? Help!
    Cheers,
    Kerry

    Thanks for that - unfortunately I have lost disk number 1 and can only find disk number 2. Honestly, I never thought I'd need them, and they've been packed and unpacked at least 4 times since I bought the computer.
    I am trying to get the disk from mac friends - I'll see what happens. If anyone knows how to get hold of these old disks, or another work-around, I'd be very grateful...
    cheers and thanks again,
    Kerry

  • Problems with iPAD2 after iOS 8 installation

    After the iOS8 upgrade, all the radio-APPs I have stop after about 20 minutes. If I start the same radio stations from Safari it's the same, they also stop after a certain time.
    I have not found any setting that may cause this problem.
    Thanks in advance for, I hope, a good tip,
    Carmen

    A lot more problems after the upgrade, i am back to ios 7.2.1 which runs smooth.
    After ios8 upgrade very slow performance on all data channels, facetime freezes , streaming audio working bad. :-( 

  • IPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

    iPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

    https://discussions.apple.com/message/25195858#25195858

  • Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Tell Apple about it: http://www.apple.com/feedback/iphone.html
    Be sure to give as much detail as possible.
    I would also check LG's site.

  • Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?

    Hello,
    Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
    I appreciate any help.

    Look in the More Like This box to the right of your post.

  • PC Suite stops working with Bluetooth after Laptop...

    I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
    However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
    Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
    "Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
    To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
    Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
    Operating system: Microsoft Windows XP
    Nokia PC Suite: Version 6.82.22.0
    Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
    Bluetooth Specification: Version 2.0, 1.2, 1.1
    Many thanks...

    Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
    In my experience, once things stop to work, I've had to strip out any subsequent installs.
    My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
    Thanks again Miksu

  • Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

    Hello all,
    I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
    I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
    Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
    Now i tried to deinstall it and again go for 11g. But even the same story here..
    Can anybody give me a solution for this..
    -Regards
    Rajesh Menon

    Saqib Alam wrote:
    i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
    ur problem is that u install latest version and now u trying to installing old version.
    now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
    install fresh windows 7.
    Regards
    SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
    There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
    Stop all Oracle services
    In the registery:
    - Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
    - Delete the entire Oralce folder from HKLM\Software
    reboot
    Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
    reboot

  • Problems with Bluetooth and stablity post Portico ...

    I updated my Lumia 920 on ATT with the Portico update the day it came out in order to get the daylight camera improvements.  I started having problems after the update, ironically problems that the update was supposed to fix:
    1) Bluetooth connection with BMW does not stay alive, drops after a few minutes
    2) When Bluetooth is connected, don't get sound and don't transmit sound.
    3) Just the other day, the phone frooze while connected to Bluetooth.  Had to put phone on speaker while calling, when I ended the call, the phone frooze.  Had to soft reset, but still have problems with bluetooth stay alive.
    4) Random reboots. 
    WIshing I had not done that update.  Any way to roll back?

    Unfortunately, seems like it . I would let the battery drain flat, then take it back to your local AT&T store and ask for a replacement. If they are being less than helpful, contact Nokia direclty by clicking the Nokia Support link at the bottom of this page.

  • I have problem with Bluetooth on my Qosmio G20

    Hi
    I have problem with Bluetooth.
    I cannot use it because it is always off.
    (Why Bluetooth Settings reports "Bluetooth is not Ready.")
    I gone to Pro.Center in our area and he side (you delete your .. Definition of the Bluetooth!
    But how!!!
    whatever
    How I get a new Definition of the Bluetooth?
    Is that possible?
    Please help me ... and learn me about all the Bluetooth things...
    My pc is (TOSHIBA Qosmio G20)
    I am waiting...

    You should have a look at:
    http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

Maybe you are looking for