Problems with Bluetooth mouse following Lion upgrade

I upgraded my MacBook Pro from Snow Leopard to Lion, this morning, and now my Kensington Bluetooth mouse, which I have been using for nearly 2 years, has stopped working. The upgraded MacBook now only registers a connection with the mouse if it is held within about 10cm of the system, but even then it doesn't respond to any movements of the mouse. I have previously been using the mouse quite happily from a distance of about 50cm.
Is this a known problem associated with Lion?

Well, after 2 days of completely refusing to work, the mouse suddenly requested Bluetooth pairing, and has worked ever since. I don't know why it took 2 days, though.

Similar Messages

AT300-100 - Connection problems with bluetooth mouse

I am having problems connecting a bluetooth mouse to my toshiba AT300-100 tablet.
The tablet and the mouse are able to successfully pair with each other. The tablet asks for the password, I enter 0000 and the two devices successfully pair up with each other.
I then ensure that the mouse is selected as an input device (click on the mouse settings icon in the Bluetooth screen). I receive no errors at any point. However, there is no mouse pointer on the screen, the mouse buttons have no effect, and the scroll wheel has no effect.
I have Googled and searched this forum, I can not find a reference to this problem elsewhere. Please advise. It appears to be an O/S bug as far as I can tell.
Looking on youtube I see the Asus tablet works fine with a mouse and I am following the exact same procedure. I have used the mouse on my Toshiba tecra with no problems at all, so I know the mouse is working just fine.
Has anyone else had this problem and is there a solution?
Thank you.
Mark

Hi
Did you solve this issue?
Are you abele to use the BT mouse connected to AT300?
In the description of AT300 its mentioned that you can use Virtual Mouse connected via BlueTooth or USB port.
Check the settings in Language & Input Android area.
There should be a point called Keyboard & Input Mouse
If you have more than one installed input device, tap Configure input methods to open the screen where you can configure each input method.

Problems with wireless mouse/keyboard after upgrade to snow leopard

Hi!
I am wondering if someone has some insight for me. I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years. I am now having problems with them irratically.
1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left. This does not happen in Word.
2. When in boxes with dropdown options, only occasionally does that happen. The dropdown either doesn't show, or it flashes quickly. Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
3. When I use my function key or mouse to display all windows, I can't choose the one I want. Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
5. For a while, my left mouse button wouldn't work. I reconfigured it, that seems to have done the trick.
6. Today, I can't open any of the menu items on Firefox. I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded. Thanks in advance for any help!
Donna

Update all your third party software or uninstall and reinstall 10.6 versions.
If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
http://roaringapps.com/apps:table
IMO save for a new 10.8 machine after this summer.
See #1-15 here, tune yourself up good.
 Step by Step to fix your Mac

Tracking problem with Bluetooth mouse..

I recently changed batteries in my Bluetooth wireless mouse... I've done that many times in the past without incident... But this time something strange happened... I used to run the tracking speed setting at the second notch up from slow but now that is lightning fast. Even the next setting down, the first notch up from slow, is too fast... And the slowest setting is ironically too slow which means if I try to move the mouse across the screen at what I would consider a normal speed, the mouse jumps back left as I move right, meaning I am overwhelming the control system... The point is something changed and I can't imagine what... These new batteries are now down a notch from top power meaning they are not new anymore but still the lowest notch is too slow and the next one up is too fast... My real question is what could have changed?? I am running 10.4.6 and I don't believe I had changed anything other than the batteries from before to after the problem started... Any thoughts???? thanks... bob..

Today I received a letter from Apple, a very strange letter that had no heading or address and didn't say "Apple", all it had was the Apple logo. But from the postmark on the envelope I could see it was posted in Cork, Ireland.
The letter confirmed that they had received my proof of purchase and that they would arrange for me to be send a replacement.
The letter said they had tried to call me but could not get through. This is FALSE. Anyone who ever calls me can always get through (although at times, they may get my voicemail). Nobody from Apple left any messages on my voicemail.
The letter gave me a Case Number and said to call their "Technical Support Team".
When I called the number they gave 0870 8760753 I was offered a number of options, NONE OF WHICH covered my reason for calling, so I chose the seemingly nearest option to it.
I found myself talking to something with an Indian accent so thick and heavy that I could barely understand him, and I am used to Indian accents.
He seemed very tired or sleepy; certainly on taking my call he seemed to be settling himself in for some kind of long haul.
Very slowly and hesitantly he started asking me for all kinds of details about me. As I gave him each piece of information he asked me for, he kept interrupting during the process that that I had to repeat myself several times. I had to interrupt him to tell him I had a Case Number (he had not asked me for one).
He took my Case Number , and paused for a long time, then said "well....Mr. -, this is about a Bluetooth Mouse, yes?"
Brilliant.
He seemed to think the pair of us were going to spend a long time negotiating about something.
He said he would need to go and speak to his supervisor. I waited on the line for 10 (repeat TEN) minutes.
He came back "Well, Mr. -....I need to check all your details".. including all my credit card details....very slowly and repeating everything twice.
Several exasperating minutes later I THINK I had convinced him that he had all my details and that he needed to have a new mouse sent to me.
He said that when the new mouse comes (THINKS...if it comes) via UPS, I must send the dead one back to them within 10 days or they will charge me for the new one. I said what happens if I don't (because this is the summer and I might be out of the country on holiday).
"That is the procedure".
I replied "so you have all the information you need now and you are going to send me the mouse, yes?"
"yes".
---long silence---
I said "IS that the end of the telephone conversation?"
"yes."
"OK thanks, goodbye"-
MORAL OF THIS STORY:
If you buy an Apple wireless mouse and it dies on you, consider if you really badly need to have it replaced by Apple. HOw much time do you have to waste?

Problems with iMac since Mountain Lion upgrade

So , several problems that I have experienced since upgrading to Mountain Lion.
1. When I "log off" off my iMac from the top left "apple" symbol, I get the rainbow wheel of death.
2. When accessing YouTube home screen or yahoo in Safari, the page is a white screen. Nothing more, nothing less.
* I have been reading some people saying that this happens to them too, but only when using an account with parental controls.
3. Hard drive "grinds" incessantly.
* I have never even seen the rainbow wheel or heard my hard drive grind on my iMac untill this upgrade.
Anybody know of any solutions, or also having these issues?

For anyone else having the "white screen" issue with youtube, and/or yahoo issue. I seemed to have repaired the issue. I turned the parental controls off for both of my kids accounts, restarted my Mac, and the problem vanished.
I also turned the parental controls back on after this, restarted the computer, and the problem came back.
*** This is 100% a Parental Control/Mountain Lion glitch. Hopefully Apple knows and is working on a solution. The sooner they fix it, the sooner I can turn the parental controls back onto my kids accounts.

Problem with Bluetooth Keyboard and Lion?

I've just purchased a 21" imac running os x lion 10.7.3 and although the mac sees the keyboard when I set up the Keyboard from system prefs, it says 'keyboard cannot be found even though the Bluetooth prefs says it's there'.
Second, there's an on/off button on the right hand side which glows green for a second when it's pushed, and ditto if you push it again, so I don't know if the keyboard is on or off! Surely it should glow grren when ON and not when OFF or is there a problem with the keyboard itself?
Bill

Hello:
I've just purchased a 21" imac running os x lion 10.7.3 and although the mac sees the keyboard when I set up the Keyboard from system prefs, it says 'keyboard cannot be found even though the Bluetooth prefs says it's there'.
Is the KB working on the system or not?
Second, there's an on/off button on the right hand side which glows green for a second when it's pushed, and ditto if you push it again, so I don't know if the keyboard is on or off! Surely it should glow grren when ON and not when OFF or is there a problem with the keyboard itself?
That is the way it is designed. When you turn the KB on, the light is on for a brief period of time. It does not stay on.
Barry

Problem with bluetooth mouse setup at startup and no usb mouse functions

Today for the first time ever I got this screen for bluetooth mouse setup at startup. I've never seen this before and have no bluetooth devices. Very weird! It continues to search for a blue tooth mouse and won't let me do anything.The window says "Pairing with your bluetooth mouse.If the mouse is not found, make sure it is discoverable" My generic usb scroll mouse will not function and has always worked fine in the past. I tried plugging in the stock apple usb mouse also and this doesn't function either so there is no way to cancell this out. I've restarted several times and no luck ,can't login and no mouse functions. Just continues to search for a bluetooth mouse . This has me worried as this is recording studio computer and I have a session tomorrow . Any ideas how to get this to bypass this bluetooth window so I can startup and login and get my mouse functions back.
thanks,Craig
OS 10.4.10
G5 dual 2.5GHZ / 4GB ram

Solved it on my end... Hope you're not afraid of using some Unix programming...
I went into Unix mode (start up holding command key and s-key down). black screen with lines of white type pop up. (Means you are now in Unix mode). Give it a few minutes to check all the computer and when it no longer keeps adding any further info on screen type "fsck -fy", that is fsck space minus sign fy and without the quotation marks - exactly as shown inside quotation marks, and hit enter. It will run for several minutes detecting all that makes your computer work... I had in the final lines a message that read "file system modified". If this is the case than re-enter the fsck -fy command. Repeat this until one of the final lines will read "the volume appears to be OK". (I only had to do it twice to get to it). At this stage type "reboot". My mac restarted and I could log in without any sign of the annoying bleutooth mouse message. Hope it will work for you too!
Jo

Help! - Problem with TV capture following Noodle upgrade

Hi All,
Hoping someone here can help me with a little problem i've found after upgrading to 'Noodle'.
After upgrade and switching to hwd from hotplug the bttv driver seems to be loaded okay for my Leadtek Winfast XP and i can see and hear TV using tvtime as before, (had to alsaconf after upgrade to get sound from my soundblaster live but otherwise ok).
My problem comes when i use the following command to try and capture TV:
mencoder -tv driver=v4l2:width=640:height=480:device=/dev/video0 -vf crop=760:568,pp=lb -ovc lavc -lavcopts vcodec=mpeg4:vqscale=6.1:vbitrate=2000 -oac mp3lame -lameopts abr:br=80 -o output.avi tv://
I've been uisng this command perfectly well up unitl this weekend when i took the plunge and upgraded. Since then i can capture the video from the TV card but the resulting capture never has any sound???
Prior to the upgrade i would have to adjust my volumes manually via the gnome volume control, lowering my master and PCM feeds and upping the Line and Capture options in the capture sections. This was to ensure the volume on my captures was not too loud, but it makes no difference now as i get no audio fullstop..
[edit]
For the record i have not upgraded mplayer to the latest version due to incompatibility with other scripts i use. The version i'm using is: MPlayer 1.0pre6-3.4.3.
I might try and upgrade this incase its an mplayer prob with the rest of the system, which maybe fixed in the current version.
[edit]
I suspect this is a problem caused by udev or a missing device and or rights issue, but unfortunately after hours of slaving i have not made any headway and i'm not sure where to go from here. I was hoping someone maybe able to explain whats happening and perhaps offer a solution.
Its as if mencoder is trying to get the audio from the wrong feed or something???
Any help would be greatly appreciated.
Regards
Spitbyte
PS: I have removed and reinstalled alsa and also reconfigured several times using alsaconf.

Cerebral wrote:Well, there's a quick way to test if it's a permissions problem: does it run correctly as root user?
Nope, it does exactly the same as root. So i guess its not a permission related problem. Thanks for the idea though
I've just found this site:
http://www.linuxtv.org/v4lwiki/index.php/TVCapture_98
and played with the amixer commands.
I have the capture options exactly as they say, save for the ID is 68. I have tried all the options 1 thru 7 and can't get an audio stream on any. (ive also adjusted volume levels)
I also noticed that there was a separate option in the full amixer listing (amixer controls) for Line playback. Out of curiosity i ran tvtime and then adjusted the volume of the Line playback option via amixer and this lowers the volume that tvtime is using.
This is interesting as i thought tvtime was using the capture channel for audio, it obviously is not and thats why i can get a feed with tvtime and not with mencoder.
So my TV card must be okay as i'm definately getting sound from it to my soundcard. The issue looks to lie with the soundcard. However, i've tried capture on my onboard sound and this does not work either. What are the chances of both sound chips failing, unlikely me thinks.
So again, i'm coming back to the idea that something has not been loaded that allows capture????
Also, if i try and watch tv via mplayer (mplayer tv:// -tv driver=v4l2:width=768:height=576:outfmt=yuy2 -vf pp=lb), then i get no sound. I'm trying to work out how to specify to mplayer which audio source to use but i'm getting lost in the man page a little (sooooooo many options ), i believe tvtime (as per man page) uses '/dev/mixer:line' as its default feed and this works, so i've just got to try and work out how to define this within the mplayer command to see if i can get sound.
My next step after this would be to see if i can route the line playback feed to mencoder for capturing ????
I dunno if i'm getting anywhere, but i'll soldier on. Please help if you can
Regards
Spitbyte

Problems with Magic Mouse (Mountain Lion).

No matter what settings/gestures I use in Mouse Preferences, double-clicking doesn't work and scrolling doesn't work. The only features that work are single- click selection, right-click shortcut menu and two-finger sideways swipe to switch desktops. The problem began in my old iMac and seems to have been trasnferred to the brand new machine when I migrated.
Two different magic mice show the same behavior so I suspect it is a hidden setting or perhaps intereference (my wireless hub is only 24 inches from where I use the mouse...)

Has/is/does APPLE ever weighed in with a response to this issue? This is certainly not the Customer Service oriented APPLE I have dealt with in the past.

I'm having problems with bluetooth mouse and keyboard. They work for the first 10 minutes then stop communicating.

I have to turn the computer off in order to get control of the computer again. Any ideas of what the problem may be?

You can run Bluetooth diagnostics by holding down the Option key and clicking the Bluetooth icon in the status menu bar.
Instructions here > OS X Mavericks: Troubleshooting Bluetooth device connections | Computerworld Blogs

Help with Kernel Panics following Lion Upgrade (Crash Log Included)

We installed Lion on our 2008 iMac and are now suffering almost hourly KPs. I have already tried a clean install. It worked for a few day but is back now. I have included teh Crash Log. If anyone has any ideas, I would love to hear them.
Thanks
Interval Since Last Panic Report: 236018 sec
Panics Since Last Report:          5
Anonymous UUID:                    8388B5F4-B65E-4284-A3F8-685EC9E4795E
Sun Nov 13 18:04:04 2011
panic(cpu 3 caller 0xffffff80002ab433): "pmap_pv_remove(0xffffff80165a06c8,0x107008000,0x4, 0x4200): pv not on hash, head: 0xffffff80008bf5e0, 0xffffff8013e33000"@/SourceCache/xnu/xnu-1699.24.8/osfmk/i386/pmap_internal.h:8 13
Backtrace (CPU 3), Frame : Return Address
0xffffff80f1113b90 : 0xffffff8000220702
0xffffff80f1113c10 : 0xffffff80002ab433
0xffffff80f1113cb0 : 0xffffff80002ab84a
0xffffff80f1113cf0 : 0xffffff8000273b26
0xffffff80f1113de0 : 0xffffff80002748aa
0xffffff80f1113e10 : 0xffffff8000237889
0xffffff80f1113e50 : 0xffffff80005415a9
0xffffff80f1113ea0 : 0xffffff800054e558
0xffffff80f1113f10 : 0xffffff800054ff95
0xffffff80f1113f50 : 0xffffff800021e0c3
0xffffff80f1113f90 : 0xffffff80002c1c8a
0xffffff80f1113fb0 : 0xffffff80002d79ec
BSD process name corresponding to current thread: helpd
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 639443536077
last loaded kext at 593755008408: com.apple.iokit.IOAVBFamily    1.0.0d22 (addr 0xffffff7f8078d000, size 36864)
last unloaded kext at 431970544572: com.apple.driver.AppleUSBUHCI    4.4.5 (addr 0xffffff7f80a30000, size 65536)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AudioAUUC    1.59
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.1
com.apple.driver.AGPM    100.12.42
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.26
com.apple.driver.AppleHDA    2.1.3f7
com.apple.kext.ATIFramebuffer    7.1.2
com.apple.driver.AppleMikeyDriver    2.1.3f7
com.apple.ATIRadeonX2000    7.1.2
com.apple.driver.AirPort.Atheros40    501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.5d4
com.apple.driver.AppleLPC    1.5.3
com.apple.driver.AppleBacklight    170.1.9
com.apple.driver.AppleIRController    312
com.apple.driver.AppleUSBCardReader    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.0.1
com.apple.iokit.IOAHCIBlockStorage    2.0.1
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AppleAHCIPort    2.2.0
com.apple.iokit.AppleBCM5701Ethernet    3.0.8b2
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleUSBHub    4.5.0
com.apple.driver.AppleUSBEHCI    4.5.0
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    167.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1
com.apple.driver.AppleIntelCPUPowerManagement    167.0.0
com.apple.iokit.IOAVBFamily    1.0.0d22
com.apple.driver.AppleBluetoothHIDKeyboard    152.3
com.apple.driver.AppleHIDKeyboard    152.3
com.apple.driver.IOBluetoothHIDDriver    4.0.1f4
com.apple.kext.triggers    1.0
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOBluetoothSerialManager    4.0.1f4
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.ApplePolicyControl    3.0.16
com.apple.driver.DspFuncLib    2.1.3f7
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.kext.ATI4800Controller    7.1.2
com.apple.kext.ATISupport    7.1.2
com.apple.iokit.IOFireWireIP    2.2.4
com.apple.driver.AppleHDAController    2.1.3f7
com.apple.iokit.IOHDAFamily    2.1.3f7
com.apple.iokit.IO80211Family    411.1
com.apple.driver.AppleSMC    3.1.1d8
com.apple.driver.IOPlatformPluginFamily    4.7.5d4
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.0.16
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.iokit.IONDRVSupport    2.3.2
com.apple.iokit.IOGraphicsFamily    2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.1f4
com.apple.iokit.IOBluetoothFamily    4.0.1f4
com.apple.iokit.IOUSBHIDDriver    4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.1
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.driver.AppleUSBMergeNub    4.5.3
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.1
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.7
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.driver.XsanFilter    403
com.apple.iokit.IOAHCISerialATAPI    2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IOAHCIFamily    2.0.7
com.apple.iokit.IOEthernetAVBController    1.0.0d5
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOUSBUserClient    4.5.3
com.apple.iokit.IOUSBFamily    4.5.3
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    165.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    331
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.7
com.apple.iokit.IOACPIFamily    1.4

I don't see any obvious causes in your crash log so my guess is it's hardware. The most common item is RAM which could be:
1. Incorrect RAM (did you upgrade recently?)
2. Failed RAM, yes it does fail!
3. Unseated RAM, remove it and reseat firmly.
To test for RAM I'd recommend downloading Rember from:
http://www.macupdate.com/app/mac/15837/rember
I would also recommend studying Kernel Panics, Tutorial: Avoiding and eliminating Kernel panics & About "You need to restart your computer" (kernel panic) messages.
Good luck locating it.

Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?

Hello,
Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
I appreciate any help.

Look in the More Like This box to the right of your post.

Serious problem with bluetooth after upgrade to iOS6.1

After upgrading to iOS 6.1 I have found serious problems with bluetooth, now I can not see the other iphone and vice versa.
Someone has the same problem?
Why Apple continues to restrict bluetooth functions?

Hi,
Thanks for your answer. Yes I've checked parameters modification and SPICBOOKING is "well" launched but it produces no results, so I guess there are some other changes in dimension customizing of AccountL or Datasrc....by the moment I'm testing but with no luck. This happens when you are about to go live and decide to upgrade your system....

IPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

iPhone 4S after upgrading to IO6 has a problem with bluetooth in Peugeot 308 No battery status is shown. With 5.1.1 everything was ok.

https://discussions.apple.com/message/25195858#25195858

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Problems with Bluetooth mouse following Lion upgrade

Similar Messages

Maybe you are looking for