Problems with bookmarks after update to version 16

My bookmarks used to appear in the bookmark drop-down menu but now are only available in the bookmark sidebar. I have tried the reset to default option. I have tried deleting the places.sqlite file and the localstore.rdf file from the profile, but no change. Should I also try deleting the places.sqlite-shm and places.sqlite-wal files??
How can I get my bookmarks back to where they were?
Also, I am unable to export bookmarks to html -- goes through the motions, but no file is created.

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Similar Messages

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Problem with sound after update

Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.

Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM

Problems with Internet, after update to build 9926

updated to version 9926 via the Update Center. everything worked properly. once it updates via windows update kb2267602 kb3034229 and update for the graphics card. after installation, LAN connection and WIFI stopped working (unidentified network without
Internet access) diagnostics showed one or more protocols are not set / incorrect value ip. after the introduction of hand-ip network has become identified, but the Internet has not appeared and diagnostics began to show problems with DNS. Internet on other
devices are working properly. Sorry for my English.

Hi Jetbal,
What is your current situation?
Have you tried to manually install the LAN and WIFI drivers? Download the drivers from the manufacturer side, then take a try to install them with compatibility mode. Right -click on the install file, then select compatibility tab, under taht tab, choose
Windows 8.1 or Windows 7 compatibility mode and then install to check if issue could be solved.
Best regards
Michael Shao
TechNet Community Support

Problems with publishing after updating to iWeb 1.1.2

I get the following message after updating to iWeb 1.1.2:
Can't create the file “shapeimage1_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
I guess my disk could be damaged, but it seems odd that it worked yesterday before the update and not today (I have the same access priveledges as before). Is there anyway I can get around this problem? I also have the newest Apple updates (10.4.8).
I get the same message if I try to publish to a folder or try to publish to .mac.
Mac OS X (10.4.8)

I am still having the problem after uninstalling 1.1.2 and resinstalling iWeb and then upgrading to 1.1.1. I followed the directions. I still find it strange that it worked prior to the upgrade but not after. However, reverting to the old version has not fixed the problem.
Could it be something with OS X 10.4.8? That was also upgraded at the same time.
I even deleted my blog entry (the only thing that changed since my last time publishing) and that did not fix the problem. Thus, I cannot publish the same web page in 1.1.1 that I could last week. I have run the disk utility and repaired permissions. I am not sure what to try.
Has anyone used other software in which I could take all the pages I have created and modify them in another program? I don't mind learning a new program, but I don't want to lose everything I have. I figure it will be easier to figure out a new program if I am tweaking already existing html files.
Adobe GOlive? A macromedia program?

Problem with "ld" after updating to Xcode 2.3

After updating to Xcode 2.3, I got an error when building a FORTRAN program. The problem seems to occur at the linking stage. The error message goes like this:
/usr/bin/ld: can't open: /usr/lib/gcc/powerpc-apple-darwin8/4.0.0/libgcc.a (No such file or directory, errno = 2)
It is true that there is no such a directory (/usr/lib/gcc/powerpc-apple-darwin8/4.0.0), but there is one named
/usr/lib/gcc/powerpc-apple-darwin8/4.0.1
Why does "ld" seem to miss the update?
(Some article on the web suggest adding -lSystemStubs -lcc_dynamic flag. How does that work?) Thanks
1.5 GHz PowerPC G4 Mac OS X (10.4.7)

ld comes with Apple's XCode, but g77 (or some other program in the g77 package) is what calls ld. When g77 itself is compiled, it hard-codes a list of paths to some xcode-supplied gcc files. If your g77 predates the release of xcode2.3, it would only know the locations of the older gcc (4.0.0) files (until xcode2.3 was released, nobody knew which gcc version it would have or where its files would be).
Fink's g77 3.4.3-13 and 3.4.3-100 both appear to encode locations for both gcc 4.0.0 and gcc 4.0.1. Perhaps you have a slightly older revision?

Problems with Gband after updating to iTUnes 7 and Quicktime

Garageband has bee acting strange ever since the update and sometimes tracks freeze and it goes into a repeat which won't stop until I use the power button to shut down the computer. I am having multiple application problems since the forced update to iTunes 7. Anyone else having issues?

many times in the past, a quicktime and/or iTunes update has caused some weird stuff. Did you repair permissions after the update? Sometimes that will clear it up. Other times, many folks have gone back to the previous versions until a fix was found.

BIG problem with Mail after updating Mac OS X Leopard to 10.5.7

Hi everyone,
after updating OS X Leopard to 10.5.7, I noticed that all of my Mail accounts had disappeared. If I try to set them up again, Mail doesn't seem to be able to store them and after quitting and re-launching, they're gone. This had never happened under 10.5.6 or previous OS.
Strangely enough, only the MobileMe account seems to be stored.
I tried repairing the permissions, checking the hard disk, re-installing Mail from the Leopard DVD, deleting the com.apple.mail.plist file. Nothing seems to work so far.
Any suggestions? I haven't been able to use Mail for almost a month now. I used to have 6/7 accounts and I can't stand having to check their web-based version. I want Mail to work as it always has!

Rest assured it doesn't happen to all Macs with 10.5.7. I'd start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=1223&start=0
You'll get a wider audience, and won't confuse the original poster with solutions that don't apply to them.

Problems with X3 after updating

Hi,
first, it is possible that I will use some wrong expressions because my phone language is actually German.
Last week I updated my phone from v6.11 to v8.4.
Before, I saved my files to the memory card, afterwards I restored them. It said "Settings reset" and there were the problems I will describe; I tried to restore again, but I could not choose the menu item "programs and games" now.
So, now
- all the themes and ringtones are gone
- the rest of my programs seems to be links named with with file type ".rms" which is "not supported" (All 4,0 MB and named chat_xxx, conv_xxx, isuite_xxx, mynokia_xxx or wocl_xxx), including the calculator which didn't leave a trace.
- my games are playable 'cause I saved them manually on my memory card - but the ones I added after I bought the phone don't work (message: invalid program. Delete?)
- I can't download a (special) program from ovi store (which I didn't try before the update, because of that I don't know if it's perhaps a problem of my provider) (message: certificate not on telephone or SIM)
- when I choose "All photos" it says "no photos to show", but I can open them over "contents -> memory card -> pictures". The camera saves the photos there, too, but it doesn't show them either.
I wonder now if it helps
- restoring the first backup again, but just "gallery files" and "programs and games" (which is chooseable again now) (this, I think, would not solve the problems with my memory games and the invalid file types of my games)
- making another backup and do the update again (will the first update then be chooseable again? I don't want to give up my programs, themes and ringtones... Can I restore them from the first backup and the rest from the second?
I would have tried the second possibility if I knew if it is possible... Please answer that, or, if you have a better solution, please give it to me.
Regards
Philip

Hi Philip,
If you still have this issue (and have not tried yet), try to reset your device by selecting Menu > Settings > Restore factory settings > Restore all.
And before restoring your backup check that all preloaded themes and ringing tones are working. Then try restoring apps and games from your backup again.
If some apps/games are not working after restore it's most probably because those are DRM protected and those you would need to reinstall.
-ThreeOs

Problem with iphone after update

Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked, it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
Any help would be very much appreciated,
Cheers
Tors,

The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

Problem with screen after update

hello,
I have a BB Passport and I have a problem after the last software update OS 10.3.1.1565
- the screen is flashing when i go into an application... This happens randomly... not every time. First I had this problem with Evernote. I erased everything from my phone and I performed a full wipe (factory reset). The problem is not solved. now is happening more often... when I go to settings, when I open an app... and so on. Usualy is flashing white screen, but last night when I wanted to watch a video, it flashed green screen...
Is there a way to solve this problem? Is this a software problem? Or I have to replace my screen?

http://www.blackberry.com/btsc/KB36757
There is a fix, though not officially released yet by BlackBerry:
http://forums.crackberry.com/bb10-leaked-beta-os-f395/os-10-3-1-2480-upgrade-files-passport-only-100...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Problem with camera after updating z1 to 14.5.A.0.270

Hello
I'm facing a problem after updating my Xperia Z1 to 14.5.A.0.27, I.e. Lollipop 5.0.2.. problem is with the camera, when I tried to capture a picture with auto flash/flash on, a bright light is appearing on the lower portion of the image. Plz help to overcome this.. Thnx in advance
Solved!
Go to Solution.

Ca you please test the same pictures with flash and without the case?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

Problems with browsers after update to Safari2.0.2 (416.12)

I have been experiencing problems with browser use on Safari today (the first time I have used the browsers since automatic update of OSX.4 was performed on 4.11.05).
Safari opens general web pages but stalls on many data base searches (spinning pinwheel).
All users on my network running 2.0.2 (416.12) have the same problem - those running earlier versions continue OK.
Does anyone have a fix or is anyone experiencing a similar (new) problem since 4.11.05?
thanks

Hi guys --
These boards are provided for us by Apple so that Mac users can help each other. This is not apple support, but a gathering place for people with questions, and people who try to provide answers.
When updating Safari you should be careful that any third party "Internet Enhancing" apps are still compatible. Programs like SpeedDownload, iGetter, PithHelmet, Acid Search, Safari Enhancer all needed updating starting around 10.3.9. Also Norton apps (with the "possible" exception of NAV) became incompatible about 8.6 or 9.0. Definitely not good for OS X. Virex can cause problems as well.
So everybody check to see if you have any of these apps, and let us know.
Also, here's my laundry list of things I do if & when Safari slows down.
1. Empty your cache & History settings via the Safari menu
2. Trash your Icons Folder:
HD>Users>Home>YourName>Library>Safari -->Icons
Restart Safari and a new folder will be automatically regenerated.
(This folder saves favicons of all the sites you visit. Needs cleaning periodically -- or you can change that file's preferences to "Read Only"
rather than "Read & Write." This will keep it from growing in size.)
3. You might want to check all three "auto" preferences in Safari. Sometimes those lists gets very long and need pruning. (I turned all autofill boxes off, and have no problems.)
4. Launch Font Book and check all fonts for duplicates. A duplicated font will have a bullet beside the font family and you can resolve duplicates by selecting the font and at the menu bar, go to Edit > Resolve Duplicates.
Do this for each font with a bullet next to it.
If you're still having problems:
5. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router, then restart your computer.
Hope this helps

Problems with bookmarks after update to version 16

Similar Messages

Maybe you are looking for