Problems with BPC Export Transaction Data process chain

Hi everybody,
we are trying to implement the procedure "How to Export BPC Transaction Data using a custom process chain " for SAP BPC NW 7.0 and everything seems fine. However, when we execute it from Excel, the package apparently runs well (the message 'IMMEDIATE RUN: The package is running...' appears) but when we go to the watch the package status, the package does not appear in the list and there is not any file exported.
When we go to watch the log of the process chain from NW, the Modify Dynamically step runs wrongly but there is no clue of what could be done to solve it. We have done it again from scratch but we always have the same error.
Any idea out there?
Thanks in advance. Kind regards,
Albert

Hi Rich,
in the end we managed to export data. Our NW administrator created the custom process type wrongly - putting a blank space before ZBPCTXEXP - and now it has been corrected and everything works fine.
Well we have managed to transport applications to one server to another one and to export/import the transactional data.
Is there any doc that explains how to transport process chains from one server to another?
In BPC Opps manual there is not too much information and we should transport quiet a lot of process chains related with Runlogic issues .
Thanks a lot for your help.
Kind regards,
Albert Mas.

Similar Messages

SAP Best Practice: Problems with Loading of Transaction Data

Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the Transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 I get the following errors/warnings:
when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
On the right side I see some actions that are also "yellow", e.g. "DataStore Activation (Change Lo ): not yet activated".
As a result I cannot see any data in tcode "RSRT" executing the queries "0FIAR_C03/...".
The problems there
1) Input help of the web template of query don't contain any values
2) no data will be shown
Can some one help me to solve this problem?
Thank you very much!
Jürgen

Be in the monitor window where u got the below issue
when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
and go to environment in the menu options TransactRFC--->in the sourcesystem...
give the logon details and enter and from there give the correct target destination as ur BI server and execute...
if u find some idoc's pending there push that manually using F6..
and come back to ur load and refresh....
if still it doen't turn green u can manully change status to red in STATUS tab and come to processing tab and expand ur processing details and right click on ur data packet which was not yet updated and select manual update...
it shows busy status and when it comes out of that once again refresh...
rgds,

System Master Data Process Chain

Hello Guys,
I am working on Admin cockpit. So far it s going well. However, I am struglling with scheduling System Master Data Process chain. When I look at its logs, I see that Operation Type (WHM)- Texts becomes red and Attribute Change Run (final step) has not finished yet(almost three hours) Please help.
Thank you,
OLGA

refer this..similar issue is discussed Alpha Conversion
Non Alpha Compliant Value..hw can this be resolved on BI 7.0 SP 13

Extremely long time when executing an export transaction data package link

Hi,
I am working in a packagelink to export transaction data to the application server. The package which I am currently using is /CPMB/EXPORT_TD_TO_APPL. I use it to generate an output file which I later use in a different appliation to register modifications applied in BPC.
It has been working correctly without problems for a time. The problem is that suddenly it stopped working. Maybe because of some changes in the dimension library (is it feasible?) . I defined and scheduled again the packagelink and it began working correctly again, but the time it takes to execute the process is really long. Approximately it takes above 10 hours, which is an extremely long time for the process. In the beginning, the packagelink was executed in an hour and a half. Could anybody tell me any idea about what can be the reason of this problem?
Any help will b much appreciated.

>      Database error text........: "POS(1) System error: BD Index not accessible"
>      Database error code........: "-602"
>      Triggering SQL statement...: "INSERT INTO "/BIC/SZD_PROD" ( "/BIC/ZD_PROD",
>       "SID", "CHCKFL", "DATAFL", "INCFL" ) VALUES ( ? , ? , ? , ? , ? )"
Hi Hari,
looks like you are hitting a BAD index.
Check the [DB50|http://help.sap.com/saphelp_nw04s/helpdata/en/9c/ca5bb3d729034aaf6f4cea2627c2f2/frameset.htm] or the DBMGUI - there should be warnings about this.
To fix this issue, either use the DBMGUI -> Recover -> [Indexes|http://maxdb.sap.com/doc/7_6/30/5ada38596211d4aa83006094b92fad/frameset.htm] function or logon to dbmcli, get an SQL session ([sql_connect|http://maxdb.sap.com/doc/7_6/11/8af4411cf5c417e10000000a155106/content.htm]) and use the [sql_recreateindex|http://maxdb.sap.com/doc/7_6/30/f7c7f25be311d4aa1500a0c9430730/content.htm] command.
Regards,
Lars

Setting output file name in export transaction data package

Hi all,
I am running an "export transaction data" package in the data manager. I wanted to set the output file name so that it will be a constant value. I wrote the following in the package editor:
INFO(%FILE%,\ROOT\WEBFOLDERS\COLMOBIL\VEHICLES1\DATAMANGER\DATAFILES\vehicles_to_pca2.txt)
TASK(/CPMB/TD_FILE_TARGET,FULLFILENAME,%FILE%)
The system run the package and reported success but the file was not created. When i did the same with an existing file name, it was not updated.
When I run the same package with the following PROMPT command instead of the INFO command:
PROMPT(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
The system works fine.
Any ideas?
TIA
Avihay

I am sad to report that apparently Adobe does not do a very good job with the PDF printer. I have just spent over an hour with support to get the answer we can not help you. I guess I will have to spend $50 for NovaPDF to handle my problem. It's a shame when a superior overall product like Acrobat is not able to keep up with the knockoffs on the small things.

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problems with the O2 blackberry data package on my Curve 3G.

I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.

Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Configuration Guide for Transaction Banking Process Chain - 0TB_DM_INIT_P01

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

Problem with oracle.jbo.domain.Date

Hi there,
I've a problem with oracle.jbo.domain.Date,
I'm doing this code (this part of code is used in my Session Attribute Listener):
* This method is used to add the session id in the database, whenever user login
public void attributeAdded(HttpSessionBindingEvent hsbe){
if(!hsbe.getName().equals("user")){
return;
AmLogin am = (AmLogin)Configuration.createRootApplicationModule(
"com.ahm.pdt001.am.AmLogin",
"AmLoginLocal");
try{
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
am.createLogin(hsbe.getValue().toString(), hsbe.getSession().
getAttribute("login").toString());
} catch(Exception e){
e.printStackTrace();
System.out.println("Error insert data user: " + hsbe.getValue());
} finally{
Configuration.releaseRootApplicationModule(am, true);
Everything is running well in Jdev 10.1.3 (I'm using ADF Faces technology), and I'm trying to deploy it on OC4J 10.1.2 and it works. But it raised an error when this part of code is runned.
--------------caused and error------------------------
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
And this is an error:
javax.faces.FacesException: #{pdt001.loginAction}: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78) at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196) at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20) at com.ahm.filter.AhmFilterSession.doFilter(AhmFilterSession.java:45) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)Caused by: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72) ... 23 moreCaused by: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.ahm.pdt001.listener.Pdt001AttributeSessionListener.attributeAdded(Pdt001AttributeSessionListener.java:27) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindHttpSession.setAttribute(EvermindHttpSession.java:128) at com.ahm.pdt001.bean.Pdt001Bean.loginAction(Pdt001Bean.java:61) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
Does anybody have the same problem like this? I've used the same method in my previous project to create oracle.jbo.domain.Date with current time using java.sql.Timestamp, but I don't know why this error happened.
Thx,
Andre

Re: oracle jbo.domain.Date issues in 10.1.3
Sascha

Problem with V.25 transaction

Hi All
I have problem with V.25 transaction. This transaction contains some variants, and currently my variant dispalying 10 feilds. Now i want to add 2 more feilds to the report. So i went to transaction VOKF and added the two feilds to my variant. But while saving it throwing an error "Total output length (142) is larger than 132 characters". So how we can rectify this error. OR how can we increase report width from 132 char to 150..?
And can u please tell me the way like how we will search for SAP notes or OSS notes for a particular transaction in SNOTE..??
Thanks In Advance
Raghu

<b>hi jayan,
Just read the error in dump what is the problem and where it has been terminated. IF the problem in print progrm check the print program is active or not. If it is active the dump will give the line no where the termincation occurs check the line no in print programme what is the error occured. Once go through the dump analyis and and revert back with acutal problem may then u ll get the required ans.
<b>reward for useful answers</b>
Regards,
sunil kairam.

Problem with item and/or data during page-processing-PS/SQL

Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobi

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Export Transaction Data to the File with the Counts in first Calumn

Hi All,
i have exported the transaction data to CSV Flatfile via Data Manager Standard Package "CPMB/EXPORT_TD_TO_FILE". And It was successful.
But I need now a Flatfile with the counts in the first calumn. How can I get it in Transformation File? Is it generally possible? or in Script Logic?
I would be grateful for every entries.
Alisher
Edited by: Alisher Babaev on Aug 17, 2011 12:58 PM
Edited by: Alisher Babaev on Aug 17, 2011 1:29 PM

Hi Alisher,
You are refering to transformation file for record count. But in transformation file we mention the IDs which are displayed in some other format and we want to change them to the other.
In your case, would like to know, do you have some property in dimension which displays the record counts? If you have then you can design it using transformation and conversion files. But incase you dont have any such property then you can not add new column in the export file.
Hope this clarifies.
Rgds,
Poonam

Problems with BPC Export Transaction Data process chain

Similar Messages

Maybe you are looking for