Problems with Bridge and FrameMaker

We are using FrameMaker 9.0.3 and Creative Suite CS4 on Windows XP, with 3 GB of RAM and 150 GB hard drive space. One of us typically runs FrameMaker and Bridge CS4 simultaneously, usually with Illustrator and maybe also Photoshop open at the same time. A few weeks ago, he began having problems. Typically he (1) opens FrameMaker, (2) opens a .fm file located on a network drive, (3) opens Adobe Bridge, then (4) selects a folder located on the network drive in Bridge. At some point, he gets an error (apparently a Windows error) that there are insufficient resources. Sometimes he is able to save his work and sometimes not, but he always has to reboot to be able to work again. He typically reboots 4 or 5 times a day.
Any suggestions as to why this might happen?
Thanks in advance,
Van

Read thruogh this rather lengthy post about "low on resources". Perhaps something in here will help faster than starting from scratch on a new post.
http://forums.adobe.com/thread/310498?tstart=30

Similar Messages

Problem with bridge and getting internet on android

My ISP uses a modem/router that's mounted outside of my house. From there it runs into my Linksys E1200. Since it's a router connected to a router I have to use it as an access point. I don't have any cable connected to the internet port in other words.
So I get a cheap LG Adroid for wifi only. The phone hasn't been activated and it doesn't have a service plan. The wifi works on it though as I've connected and used the wifi at businesses that provide it for free.
My desktop is wired with a ethernet cable. My notebook is wireless and it connects and get the internet. So ISP router> Linksys in bridge mode. The cable from the router can be put in any port but it's in a yellow one. My notebook on the other side of the house conected via wifi and getting the internet.
My problem is the phone. No matter what I've tried it connects to the router but I end up getting a "Internet not availible: message shortly after. I didn't know whether to use the Linksys IP info to setup on the phone or the IP of my ISP's router/modem. I've tried to enter both on the phone when modifying the network.
I unplugged everything but my desktop and connected it to the Linksys. Did ipconfig /all. Used a browser to get to the Linksys setup. Set it in bridge mode. Disabled DCHP. All security is disabled., including the WPS that's a feature on my router. Specified my own IP info in the setup tab, using the information I got from the ipconfig. Rehooked up the cables in the back. All is well. I have internet o nthe desktop and the notebook, just not the phone. To get to the Linksys setup page I not longer do the 198.162.1.1. I enter the gateway of my isp's modem/router.
I've entered all of this same information on the phone with a static connection instead of DCHP.Choose a IP that was a few digits higher than the gateway. I still get the "Internet not availible" that Cisco reports back. On the desktop I pinged the IP I assinged my phone. Packets are recieved. I can aslo acces the Linksys setup page on my phone so it really is connecting to the router.
I'm at my wits end. I've tried different things, too many to remember. If anyone has any idea I would appreciate it.
Solved!
Go to Solution.

No the phone should get it's IP from your DHCP server.
The IP Address of the Linksys is just so you can access it and has nothing to do with the network. You turned it into a repeater\switch.
What is your DHCP server's IP Address and DHCP range? This info will basically spell things out.
If you plug a computer into one of the Linksys lan ports it should work normally and so should the wireless devices in that case
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Problem with bridge and Photoshop CS4

When in Bridge CS4, I want to open a JPEG photo in Photoshop, when double clicking It opens PAINT and not Camera Raw. I have the CS4 on a laptop and no problem there. I matched all the settings and still the desktop opens PAINT instead.

runway929 wrote:
Yes thanks, it worked but how do I change some of them to "none". I don't see how I can do that.
Does it matter?
You could always set all to default and start from scratch.
It's not a very well designed dialog!

Trouble with bridge and CS3

I had a problem with bridge and now it says to repair the problem i have to reactivate my software. When I go to do that it say I have to take it off another computer before I activate it. But it is not nor has it ever been on another computer. Can anyone help me?

mad at 78 wrote:
I tried it and it said Bridge operation could not complete.
This does not make sense. Did you get the reset window with the 3 options?

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Problem with EAP and RADIUS

Hi *,
I have the following problem with RADIUS and EAP authentication.
Radius server sends an "Access-Accept" packet to my AP, but the station does not authenticate.
I've tried with different encryption configuration and with different authentication methods under "dot11 essid", but nothing changes...
What could it be?
Debug piece and configuration follows:
*Jan 25 14:23:34.795: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.795: RADIUS(00000012): sending*Jan 25 14:23:34.799: RADIUS:   4E 47 56 7A 78 65 4A 4F 55 31 47 40 77 6C 61 6E [NGVzxeJOU1G@wlan]*Jan 25 14:23:34.799: RADIUS:   2E 6D 6E 63 30 30 31 2E 6D 63 63 30 30 31 2E 33 [.mnc001.mcc001.3]*Jan 25 14:23:34.799: RADIUS:   67 70 70 6E 65 74 77 6F 72 6B 2E 6F 72 67        [gppnetwork.org]*Jan 25 14:23:34.799: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:34.799: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:34.799: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:34.799: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:34.811: RADIUS/DECODE: EAP-Message fragments, 20, total 20 bytes*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:34.831: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:34.831: RADIUS: AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:34.831: RADIUS:   32                                               [2]*Jan 25 14:23:34.831: RADIUS(00000012): Config NAS IP: 192.168.173.2*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.835: RADIUS(00000012): sending*Jan 25 14:23:34.835: RADIUS:   10 01 00 01 07 05 00 00 D9 37 C3 D9 79 3E 33 EA [?????????7??y>3?]*Jan 25 14:23:34.835: RADIUS:   F3 7D 73 43 BF BA D0 6A                          [?}sC???j]*Jan 25 14:23:34.835: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:34.835: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:34.835: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:34.835: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.035: RADIUS: Received from id 1645/64 192.168.177.158:1812, Access-Challenge, len 304*Jan 25 14:23:35.039: RADIUS:   46 10 78 5F 5F B0 CB 6C 0B 05 00 00 DA C3 BF 28 [F?x__??l???????(]*Jan 25 14:23:35.039: RADIUS:   E0 18 2B 95 97 C2 0A D7 40 53 FE 62              [??+?????@S?b]*Jan 25 14:23:35.039: RADIUS(00000012): Received from id 1645/64*Jan 25 14:23:35.039: RADIUS/DECODE: EAP-Message fragments, 60+220, total 280 bytes*Jan 25 14:23:35.355: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:35.359: RADIUS:   92 DA 5E 26 CF 40 01 22 7A 8E F5 C1              [??^&?@?"z???]*Jan 25 14:23:35.359: RADIUS: NAS-Port-Type       [61] 6   802.11 wireless           [19]*Jan 25 14:23:35.359: RADIUS: NAS-Port            [5]   6   265                       *Jan 25 14:23:35.359: RADIUS: NAS-Port-Id         [87] 5   "265"*Jan 25 14:23:35.359: RADIUS: NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.367: RADIUS: Received from id 1645/65 192.168.177.158:1812, Access-Accept, len 30*Jan 25 14:23:35.367: RADIUS: authenticator 8C 2C 1B 97 82 BB 6C 7F - AA D3 4A AB CA 22 8B B7*Jan 25 14:23:35.367: RADIUS: EAP-Message         [79] 10 *Jan 25 14:23:35.367: RADIUS:   03 01 00 04 00 00 00 00                          [????????]*Jan 25 14:23:35.371: RADIUS(00000012): Received from id 1645/65*Jan 25 14:23:35.371: RADIUS/DECODE: EAP-Message fragments, 8, total 8 bytes*Jan 25 14:23:35.671: %DOT11-7-AUTH_FAILED: Station d023.dbb8.d6a9 Authentication failed
Config:
aaa new-model!aaa group server radius rad_eap server-private 192.168.177.158 auth-port 1812 acct-port 1813 key 7 044803071D2448!aaa authentication login eap_methods group rad_eapaaa authorization exec default if-authenticated aaa authorization network default if-authenticated !         aaa session-id commonip name-server 192.168.177.45!                dot11 ssid WifiEAP1   vlan 10   authentication open eap eap_methods    authentication shared eap eap_methods   authentication key-management wpa optional   guest-mode!         bridge irb!         interface Dot11Radio0 no ip address no ip route-cache !        encryption vlan 10 mode ciphers aes-ccm tkip wep128 !        broadcast-key vlan 10 change 300 !        ssid WifiEAP1 !        antenna gain 0 station-role root!         interface Dot11Radio0.10 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled!         interface GigabitEthernet0 ip address 192.168.173.3 255.255.255.0 no ip route-cache!         interface GigabitEthernet0.1 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled!         interface BVI1 ip address 192.168.173.2 255.255.255.0 no ip route-cache!ip radius source-interface BVI1 bridge 1 route ip
thanks so much!

Stefano: not sure if related but there is an unsupported attribute in the debugs:
Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr:
*Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41
*Jan 25 14:23:35.355: RADIUS: AAA Unsupported Attr: interface
Try to eliminate any configured attributes on radius except those in IETF radius. Then try again.
You may also chech by removing the shared eap as suggested above. Let us know if this works.
Sent from Cisco Technical Support iPad App

Problem with JRE and Yahoo applets

Hi, I couldn't find any answer for this anywhere else...
Whenever I try to play a Yahoo game, certain windows will "shake". For example, if I log into yahoo, then go to play their spades game, the applet will load without any problem. The game room will appear and everything seems to be fine. But if I click on the Start Panel, the borders of the Start menu will "shake" If I right click on anything, that menu will also shake. This only occurs while JRE is running the yahoo applet. Once I leave the yahoo game, everything returns to normal. If I use IE and MSVM, this problem does not occur. This problem does not seem to occur with other instances of Java either. Only Yahoo games. I tried searching Yahoo for an answer to this, but didn't find anything. When I tried getting help from them, they replied with an email to update Java and/or my browsers. Well, I am using version 1.4.2_04 of java, and have IE6 updated as of today. Also, I am using Opera version 7.54 and Firefox 0.93. This problem with Java and Yahoo occurs no matter which browser I am using. The only way to keep this from happening seems to be to use IE with MSVM. Any ideas?

That page does apply. Everything that you have written indicates conclusively that the Yahoo game you're playing is the source of the problem. The fact that it works with the MS jvm but not with the Sun jvm, that the Sun jvm works with other Java applets, etc all say the same thing - that Yahoo applets wer/are coded to work with the MS jvm, which uses MS extensions in violation of the Sun/MS licensing agreements. The statement at the bottom of the page is proof positive - your spades game is not listed by Yahoo as being fixed.
"07/17/03 - From Yahoo! Customer Care:
We have deployed a fix for the incompatibilities with the Sun JVM� in the following games:
Chess Gin Cribbage Euchre Bridge
Hearts Toki Toki Boom Graffiti Pool
We plan to upgrade the rest of the games on an ongoing basis. "
The Yahoo applet is the problem and requires repair...

Problem with Bridge CC

When I open my cr2 files in bridge cc they are opened in CS6 instead of in CC as before. I have recently uninstaled CS5 which I never use. Also when I open my jpeg files in bridge and photshop cc they are opened in another program. Please does anyone have a solution to this

Thanks for the prompt reply. This seems to have solved the problem.
Ursprungligt meddelande----
Från: [email protected]
Datum: 2013-12-01 01:24
Till: "norman_nichols"<[email protected]>
Ärende: problem with Bridge CC
Re: problem with Bridge CC created by Curt Y in Bridge General Discussion - View the full discussion
By uninstalling the previous version you have fouled up the file association. You can try the manual method of preferences/file type assoications and changing the default. If this does not work there are other ways that involve more work.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5888291#5888291
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5888291#5888291
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5888291#5888291. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Frustrating problem with Bridge 6.1.0

I have been experiencing a frustrating problem with Bridge 6.1.0 and previous versions. Soemtimes when I save a file to a particular folder, the file is present in the Finder window, but is not visible in Bridge. If I move the file from Finder to Bridge by draging it there, then it shows up but it is so frustrating to have to do it this way. I have tried to use the «Refresh» function in Bridge but that does not help. All scripts are turned on in Preferences- I have Mac OS X 10.9.4

The current version will not run on Mac OS 10.6.8. Thanks for any assistance.
The easiest way would be to update to at least 10.7.5 (supported on most older Macs) but maybe you have strong reasons not to do so, however it will put you in to more trouble in the future because newer applications have more often the habit of not being able to support older OS versions due to limitations of this old OS.
Here is the announcement of Adobe:
http://blogs.adobe.com/creativecloud/moving-ahead-with-mac-os-x-10-7-and-higher/
However PS CC should still work on your system and otherwise CS6 should. As a cloud subscriber you still have access to both CC and CS6 on the Adobe CC download pages. But only PS is a major upgrade (changed to version 2014) and Bridge has just a minor update and should still work on 10.6.8 I would think?
Installing the updates and upgrades did not remove or uninstall the CC versions of PS, otherwise use CC application to install CC again.

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Problems with Bridge and FrameMaker

Similar Messages

Maybe you are looking for