Problems with bridge between 2 weblogic
Hello!
We try to set up a bridge between 2 weblogic 8.0 on 2 machines to send JMS-messages.
Our set up / system looks like:
http://www.dsv.su.se/~fr-ander/images/Overview.jpg
When we send our messages they do not seems to get all the way trough.
Look at the following image that describes machine A during a send and receive.
http://www.dsv.su.se/~fr-ander/images/weblogic_tables.JPG
1 The bridge is running
2 We have not send a message yet and the monotoring looks like this.
3 We send a message from machine A to B.
4 Very often, just after the message is sent, we get this message from the monotoring of the bridge:
"WARN: faild and will connect later"
It lokks like the bridge is connected again after 15-30 sec.
How ever it seems that machine B indicates that something happens. In the next step (5) we have done the opposite and send from B to A. We get the same result on both machines when we monotor them after a send. In step 5 you see the monotoring of machine A after a send from B. The only difference is tha the bridge from B to A seems to be more stable and do not break down. It looks like it have the same state all the time "Forwarding messages".
5 Assume that we have send a message from B to A then it seems that we get a indication about that at A ("Messages high" and Messages received" increase), something do get to the destination. (The same happens if the secnario is from A to B). But we do not get a indication in the "Messages" column!! When we try to read from the queue FredrikReceive or OscarReceive we get nothing.
Do you guys got any idea why this happens?
A) Why is the bridge "falling down" all the time when we send and why the bridge "get up" again a while later.
B) Why do we do not find the real message, why do we get the indication that something happens but we can not read the message???
Best regards
Fredrik and Oscar
Hi Fredrik.
Message bridges are tricky things, and there are a number of requirements that need to be in place for them to work correctly:
- <b>ALL</b> JMS objects need to be unique between domains for XA transactions to work correctly. From looking at your diagram, this appears to be the case, but I can't see the name of higher level objects like your connection factory and JMS server.
- the domains must have trust enabled, which means setting the same domain security credential for both domains
- the correct adapter rar file needs to be deployed for the domain.
Soooo...
- which adapter are you using for the JMS bridge? (what is the name of the RAR file?)
- are you getting any warnings/errors as part of starting the message bridge? From looking at the administration console, everything looks OK on first flush because you're getting a consumer plugged in.
But if you're not seeing those bytes pending disappear, that means there are transaction issues in communicating between the domains. (most likely caused by domain trust)
Try enabling the following switches in your start script for both domains:
-Dweblogic.Debug.DebugMessagingBridgeStartup=true
-Dweblogic.Debug.DebugMessagingBridgeRuntime=true
There's a pretty good FAQ for troubleshooting messaging bridges that I've used in the past here: http://e-docs.bea.com/wls/docs81/faq/msgbridge.html#251107
...and the general configuration reference for messaging bridges is here, if you haven't gone there already (apologies if you have) - http://edocs.bea.com/wls/docs81/ConsoleHelp/messaging_bridge.html#1107082
<br>
Kevin Powe
http://www.integral-techsolutions.com
Similar Messages
-
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .
HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1 5804
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Secondary AP Image Size
ap801 4964
c1100 3036
--More or (q)uit current module or <ctrl-z> to abort
c1130 4884
c1140 4492
c1200 3316
c1240 4712
c1250 5064
c1310 3084
c1520 5244
c3201 4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
KNOWLOGY_DC01 disabled -
KNOWLOGY_DC02 disabled -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01 disabled -
KN1252_AP02 disabled -
Anham_AP03 disabled -
ANHAM_AP01 disabled -
ANHAM_AP04 disabled -
ANHAM_AP02 disabled -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID Interface Network Admission Control Radio Policy
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
7 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
5 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
9 knowlogy_ogr Disabled None
10 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 11
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 44
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 118
WLAN 1 :........................................ 111
WLAN 2 :........................................ 111
WLAN 4 :........................................ 112
WLAN 6 :........................................ 112
WLAN 7 :........................................ 111
WLAN 9 :........................................ 112
WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 7
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:df:a5:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 ..........Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
Unable to create a JMS Message bridge between Weblogic 12c and Weblogic 8.1
Hi,
I am unable to successfully create a Message Bridge between Weblogic 12.1.1.0 and Weblogic 8.1. The error message being received is:
eis/jms/WLSConnectionFactoryJNDINoTX > ResourceAllocationException generated by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory, url = t3://localhost:8001, user name = System) ">
The error on the monitoring tab is WARN: failed to connect to target.
Both domains are deployed on one box for testing purposes. The bridge itself is deployed on Weblogic 12c. The areas of config that may be of interest are:
<server>
<name>AdminServer</name>
<listen-address></listen-address>
</server>
<messaging-bridge>
<name>Bridge</name>
<target>AdminServer</target>
<source-destination>JMSBridgeSource12c</source-destination>
<target-destination>JMSBridgeTarget81</target-destination>
<selector>Test</selector>
<quality-of-service>Exactly-once</quality-of-service>
<qos-degradation-allowed>false</qos-degradation-allowed>
<durability-enabled>true</durability-enabled>
<idle-time-maximum>60</idle-time-maximum>
<async-enabled>true</async-enabled>
<started>true</started>
<preserve-msg-property>false</preserve-msg-property>
</messaging-bridge>
<app-deployment>
<name>jms-xa-adp</name>
<target>AdminServer</target>
<module-type>rar</module-type>
<source-path>D:\ORACLE~3\WLSERV~1.1\server\lib\jms-xa-adp.rar</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<jms-bridge-destination>
<name>JMSBridgeSource12c</name>
<adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
<user-name>System</user-name>
<user-password-encrypted>{AES}nfFzhs+0J/O2Cenf0g4zDsDyvIKENMF7cZ5sAVUehX0=</user-password-encrypted>
<classpath></classpath>
<connection-factory-jndi-name>JMSConnectionFactory12c</connection-factory-jndi-name>
<connection-url>t3://localhost:7001</connection-url>
<destination-jndi-name>JMSQueue12c</destination-jndi-name>
</jms-bridge-destination>
<jms-bridge-destination>
<name>JMSBridgeTarget81</name>
<adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
<user-name>System</user-name>
<user-password-encrypted>{AES}eBkO46cHvtrzEraOMIOdXow6WvEAtA4NCUDTQ4mC+9w=</user-password-encrypted>
<classpath></classpath>
<connection-factory-jndi-name>JMSConnectionFactory81</connection-factory-jndi-name>
<connection-url>t3://localhost:8001</connection-url>
<destination-jndi-name>JMSQueue81</destination-jndi-name>
</jms-bridge-destination>
I have enforced global trust between the two domains. I have disabled the guest user on the 8.1 domain but can’t see where to do this on 12c.
Any suggestions would be much appreciated.
Regards
John
Edited by: 958336 on 13-Sep-2012 03:11Thanks for the recommendation. Unfortunately it did not help solve the problem.
I have managed to get a JMS bridge working between 12c and 8.1 by including the 8.1 weblogic.jar on the classpath. This setup was using eis.jms.WLSConnectionFactoryJNDINoTX.
After trying to use the adapter that supports transactions, WLSConnectionFactoryJNDIXA I received the following error:
java.lang.IllegalStateException: can only be called from server
Is this because the Weblogic 12c server now views the 8.1 server as being foreign? -
Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"
Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is. -
Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek RandallI don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.
-
I always get an error message (49).See picture below. But at the same time a had no problems with the update for Photoshop CC 2014. so whats the problem with Bridge CC?
Hi Robert,
Please refer to the link below:
Getting Download Error 49 Bridge Cc
Regards,
Sheena -
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane. -
When I open my cr2 files in bridge cc they are opened in CS6 instead of in CC as before. I have recently uninstaled CS5 which I never use. Also when I open my jpeg files in bridge and photshop cc they are opened in another program. Please does anyone have a solution to this
Thanks for the prompt reply. This seems to have solved the problem.
Ursprungligt meddelande----
Från: [email protected]
Datum: 2013-12-01 01:24
Till: "norman_nichols"<[email protected]>
Ärende: problem with Bridge CC
Re: problem with Bridge CC created by Curt Y in Bridge General Discussion - View the full discussion
By uninstalling the previous version you have fouled up the file association. You can try the manual method of preferences/file type assoications and changing the default. If this does not work there are other ways that involve more work.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5888291#5888291
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5888291#5888291
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5888291#5888291. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Frustrating problem with Bridge 6.1.0
I have been experiencing a frustrating problem with Bridge 6.1.0 and previous versions. Soemtimes when I save a file to a particular folder, the file is present in the Finder window, but is not visible in Bridge. If I move the file from Finder to Bridge by draging it there, then it shows up but it is so frustrating to have to do it this way. I have tried to use the «Refresh» function in Bridge but that does not help. All scripts are turned on in Preferences- I have Mac OS X 10.9.4
The current version will not run on Mac OS 10.6.8. Thanks for any assistance.
The easiest way would be to update to at least 10.7.5 (supported on most older Macs) but maybe you have strong reasons not to do so, however it will put you in to more trouble in the future because newer applications have more often the habit of not being able to support older OS versions due to limitations of this old OS.
Here is the announcement of Adobe:
http://blogs.adobe.com/creativecloud/moving-ahead-with-mac-os-x-10-7-and-higher/
However PS CC should still work on your system and otherwise CS6 should. As a cloud subscriber you still have access to both CC and CS6 on the Adobe CC download pages. But only PS is a major upgrade (changed to version 2014) and Bridge has just a minor update and should still work on 10.6.8 I would think?
Installing the updates and upgrades did not remove or uninstall the CC versions of PS, otherwise use CC application to install CC again. -
Problem with Bridge CS6 and MCXRedirector (OS X 10.9.5)
Good afternoon all, I have a very irritating issue with Bridge CS6 that I've pretty much given up on now, so I'm wondering if anyone out there can help me before I do.
The issue lies with Bridge CS6 running in a networked Mac environment, first, a little background: I am using OS X Server's Workgroup Manager facility for various restrictions and folder redirection. Our users had a nasty bug a little while ago that caused saved Photoshop files to end up in ~/Library/Caches/TemporaryItems instead of the actual network home location they selected to save in. While this was happening, a single entry was being used in the MCXRedirectory preference to redirect the entire of ~/Library/Caches/
This was resolved by changing that preference and branching it out a little more, so now the folders subject to redirection are as follows:
~/Library/Caches/Adobe
~/Library/Caches/Adobe Camera Raw
~/Library/Caches/Meta
~/Library/Application Support/Adobe
Doing this fixed the saving issue with Photoshop, but has in turn broken Bridge. When launched, Bridge immediately fails with the error "Adobe Bridge CS6 quit unexpectedly" and gives the three options to ignore, report or reopen.
Taking away the ~/Library/Caches/Adobe redirection allows Bridge to work as normal again, but then I'm back to square one with Photoshop files saving in TemporaryItems again.
Does anyone have any advice to remedy this annoying problem please?
Thanks in advance.
EDIT: Bridge version is 5.0.2.4Sorry, did not solve the problem. The info given did not bear much relation to what I could see in the print drop down box. I have been through all settings I can access and every thing appears normal. The print preview in the print box appears normal and shows colour, but this does not translate to the actual print.
When printing a docuement of 3 pages or more using double sided the result is the first docuement page on one side of a sheet and the last page on the other side, but upside down, despite orientation set to long edge binding. All other pages between first and last are ignored.
When printing docuements originating from printer software such as Print Quality Diagnostic and Make The Most Of Your Printer, the printer performs correctly with good quality printing and colour.
I assume that the Mac update to 10.9.5 has corrupted something but I am not knowkedgeable enough to understand what. Any further assistance would be greatly appreciated. -
Problem with Bridge CS4 reading/editing XMP metadata added in Bridge CS6
Please excuse me if this is a dumb/obvious question. I did try searching the forums for similar problems and didn't find anything that seemed to speak to my issue.
I'm having a problem where Bridge CS4 won't read/edit xmp metadata (specifically, keywords and descriptions in the IPTC panel) that I have entered using CS6. it will read some files, not others. The files are all .mp4s. Of these files, I can read/edit IPTC panel metadata for some of them in Bridge CS4; I can add metadata for all of them in CS6. I see no particular pattern in these files to explain what is and isn't read/editable in CS4.
My question is whether this is a compatibility issue between different versions of CS (in this instance, CS4 and CS6). i know it's a tired refrain to blame software when it could easily be user error, in which case I'd be frankly delighted to know what i'm doing wrong. Please bear with me as I give a few more details.
I'm using macs. I've tried this on multiple systems - for instance, on a mac pro 3 which for some reason has both CS4 and CS6 installed, i can add and edit keywords using CS6, but not when using CS4. Again, in CS4, some .mp4 files read/edit, others do not.
Bridge CS4 blames the files and tells me that the selected file cannot store xmp metadata, and that the properties cannot be modified. To be specific, in the metadata panel it says "this property cannot be modified"; in the keyword panel, it says, "This file (zzz.mp4) cannot store xmp metadata. No changes will occur." This seems odd, because I'm able to add xmp metadata for the same files in CS6 on the same computer, and other computers. I know this problem would disappear if all our computers were using CS6 (or CC), but unfortunately that's not a possibility at the moment. Some of them only have CS4.
Computer details (not an exhaustive list, but two instances): mac pro 3.1 running snow leopard, 16GB memory; macbook pro 4.1 running snow leopard, 4GB memory; adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Things I have tried:
Permissions - the files are set to read/write for everyone. Given that I can add/edit metadata in CS6, it doesn't seem to be a permission issue.
Purging the cache - other users seem to have had problems adding metadata in Bridge CS4 where purging the cache for affected files solved the problem. Didn't work in this instance.
Upgrading all affected computers to CS6/CC is beyond my control. I need to figure out why CS4 won't let me read/add/edit xmp metadata, if only for the sake of understanding the broader implications for interoperability.
Any helpful suggestions would be much appreciated.
Thanks,
Kevinadobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Without having experience with mp4 files and metadata my observation is that you certainly have not updated Bridge CS6 ( should be 5.0.2.4) and I believe also not the latest version of CS4, can't imaging this also stayed at .0.0 so first try to update both.
And if CS4 can read the data of some files it should be capable of reading them all. Be sure to have the files completely cached first, can take a while.
Other things to try in CS4 is refresh preferences (hold down option key while restarting Bridge and choose reset prefs).
And also check for hidden cache files using menu view/show hidden files. Sometimes those cache files can be troublesome between versions.
If purge cache did not work and reset prefs also failed consider to also delete Bridge plist file and Bridge cache file manual (from user library) -
Weblogic JMS bridge between Weblogic and oracle Advanced Queue
Hi,
We are facing some issues when we are trying to integrate with Oracle AQ JMS through Weblogic.
We have configured a Foreign AQ server which points to the oracle Advanced Queue and we are trying to create a Weblogic JMS bridge between AQ and weblogic. The bridge works perfectly if create the connection factories and bridge destinations with NonTX mode. The issue is with XA mode. Also we have deployed the Resource adaper for XAResource to use XA transactions.
No help is available for the exception on google too :)
Following is the exception we are getting.
<An error occurred in bridge "aqjmsbridge" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XA_OK
javax.transaction.xa.XAException: method start should not be called on weblogic.transaction.internal.IgnoreXAResource
at weblogic.jms.foreign.IgnoreXAResourceImpl.start(ForeignAQIntegration.java:260)
at weblogic.connector.security.layer.AdapterLayer.start(AdapterLayer.java:513)
at weblogic.connector.transaction.outbound.XAWrapper.start(XAWrapper.java:466)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1184)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1117)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:516)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:443)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy59.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
Will appriciate any help for the above.
Thanks and Regards,
NavinMaybe this if of any help:
- Re: Help with creating AQ JMS
or
- Re: AQ Weblogic integration - JMS-107: Operation not allowed on Connection -
Problems with Bridge CS4.
Dear members:
Since my last disappointing experiences with Bridge I decided I would wait until CS4 had been out for a while and Adobe had the chance to clean all the bugs and problems with the first releases. I am now beginning to use the CS Premium suite and Bridge is by far the one application I used the most to browse my large library of photos.
In trying to use for the past few days I have run into numerous problems. Some of them are:
1. When I first launch the application I get an error message stating the following:
" Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation. "
2. While building previews for a folder with approximately 200 images Bridge displayed a message stating the it was low on memory and suggesting I should restart it. This has happened to other folders and not just this one, some with more and some with less images. I am sure the issue has nothing to do with memory as I have always used Bridge CS3 with these folders without any such problems.
3. Despite the fact that all my image folders contain thumbnails and previews previously created by CS3 the new Bridge CS4 treats them as if they contained nothing. The application starts the whole process all over again and takes longer than CS3 did to perform the same task.
My computer is a Powermac G5 dual 2.0 GHz with 4.5 GB RAM and two internal 1.5 GB HD. Considering this kind of internal RAM I don't think memory should be an issue.
I ran the update tool but couldn't find any newer version of Bridge CS4. To the best of my knowledge I am running the latest versions of all applications in the CS4 Premium suite
Some of the questions I have are:
1. Can't CS4 use the thumbnails and previews that were previously built by Bridge CS3 ? Will the application have to start this whole process all over again for every single folder I have ?
2. Why all these error messages and bugs ?
3. Is CS4 really slower than CS3 ? So far this has been my experience.
4. Considering at least one bug remains from the previous CS3 version (the little triangles that appear next to folders even when there are no subdirectories) how many problems should I expect to find with this new version ?
My apologies for all the questions above but the answers are important as I am now beginning to use the application for critical tasks.
Thank you in advance for your help.
JosephThere appears to be many problems in all versions of Adobe Creative Suite with Bridge.
I have a few post currently and even the employees of Adobe seem very uninterested in helping at all. They sure offer info on posting correct data and correct forum but little else to help resolve our problems.
The majority of problems you are incurring I have had and 99% were cured within the "Security>User" settings. Check similiar posts that are listed to the right of your post.
The final problem of "Not enough memory" has still not been resolved. Phone Tech support is no longer available free and I even paid for 1 session, spent 3.5 hours with the Tech and problem was "escalated"....that was in August 2010!!
Good luck!
Dan -
Problems with Requests in Weblogic 6.1
Hi,
i am using weblogic in my project both as a webserver and as the application server.
But i am facing problems with requests being sent to the server. Basically i have
a form in my jsp which, if submitted by multiple clients at the same instant in
time, the server gets confused and mixes up the data in the requests !! the form
is submitted to another jsp which in turn calls a SLSB which in turn calls various
entity Beans to fulfill the request.
Now if 2 or more clients hit the submit button together, the server is mixing
the data from the requestsand i get corrupted output as a result.
That if i submit values (a,b,c) from one client machine and values (x,y,z) from
another machine, the server puts one of the transactions properly and in the other
it picks up the data from the other request and takes something like (x,y,c) !!
Is this a bug in Weblogic 6.1 or am doing something wrong ??
Any help would be appreciated.
RajaMake sure your JSP scope is set correctly:
<jsp:useBean id="beanName" scope="session" class="abc.BeanClass" />
"Raja" <[email protected]> wrote in message
news:3c6abfc8$[email protected]..
>
Hi,
i am using weblogic in my project both as a webserver and as theapplication server.
But i am facing problems with requests being sent to the server. Basicallyi have
a form in my jsp which, if submitted by multiple clients at the sameinstant in
time, the server gets confused and mixes up the data in the requests !!the form
is submitted to another jsp which in turn calls a SLSB which in turn callsvarious
entity Beans to fulfill the request.
Now if 2 or more clients hit the submit button together, the server ismixing
the data from the requestsand i get corrupted output as a result.
That if i submit values (a,b,c) from one client machine and values (x,y,z)from
another machine, the server puts one of the transactions properly and inthe other
it picks up the data from the other request and takes something like(x,y,c) !!
Is this a bug in Weblogic 6.1 or am doing something wrong ??
Any help would be appreciated.
Raja -
Urgent! Problems with bridge JDBC-ODBC
Hello,
I have found out that JDBC-ODBC bridge in JDK 1.4.1 don't works fine, because, if you want to store text largest 254 characters in a field type text in one record of a Access database's table, it generate a SQLError, I have tried with EasySoft JDBC_ODBC and it works, with it I could store text fields largest than 254 characters, but I have new problems, EasySoft bridge is not free, and don't let store nulls in fields type Date [with PreparedStatement x, x.setDate(theDate)] (raise a SQLError), in the other hand, JDKs bridge do it. Somebody knows if exists JDCB-ODBC free drivers more suitables than JDK's includes, or if exists upgrades?
Is very urgent!, Thanks a lot
(Sorry, my english is very poor)I have tried it, Is there where I found the EasySoft's JDBC-ODBC driver, but the result is: one problems out, yes, now with this driver I can store String largest 254 characters in fields type MEMO of a table in Access Database, but two new problems, 1st. is a trial version, (requiere paid), and 2nd. don't let store nulls in fields type Date when JDKs JDBC-ODBC bridge lets, and the aplication needs leave this fields blanks.
Any other idea?
Thank
Maybe you are looking for
-
hello ABAPERS i have got a requiremet in that i have to get the relation . how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp a
-
Can I unzip the .ipa file and edit the application.xml file
I want to modify the below info to also have an additional string value of 2, which somewhere along the line tells something somewhere that the app can run on the ipad. Is there some info in the compiled application that will error out if I modify th
-
9iAS multi-node install (Rel 1)
Can anyone point me to a link that gives the steps of taking the DB tier of an existing 9iAS (Rel 1) install to a new DB on a new box? A little more than just the concept level. I thought that the answer would be in the standard install guides . or,
-
Hi, I'm trying to deploy the OBIEE VM provided by Oracle http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html I have downloaded all 11 archives (and unzipped them with 7zip), as well as the ovf file. I also have instal
-
How do i disable "Move Tab in focus" keyboard shortcut (CTRL + L/R ARROW)
how do i disable the keyboard shortcut for[[http://support.mozilla.com/en-US/kb/Keyboard%20shortcuts#w_windows-tabs|"Move Tab in focus" (CTRL + L/R ARROW)]] ? i know that firefox does not support customizing keyboard shortcuts, but is there a way to