Problems with brush size in CS6

Somebody help please, what ever size canvas i choose, my brushes come out extremly small ! how can i resolve this please ? Photoshop CS6

I'm having the same issue, and I'm on a deadline. I just bought CS6 this week and it was ok till yesterday. When I choose from my own custom brushes, a 2400-pixel brush comes out very tiny. My canvas size is usually about 4000x3800 pixels, 300dpi cmyk. I googled it and found a forum where a guy said to reset all tools. I did that and it was fine again, but today it's happening again even after I reset. This is an emergency! On top of this, I can't see a thumbnail when opening psd files, and that is not an improvement!

Similar Messages

Problem with Cell size in Excel output of XML report

Dear all,
I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
Thanks
RAJ

Hi ,
You can try with
<xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
may be helpful to you
Thanks,
Ananth
http://bintelligencegroup.wordpress.com/

Problem with font size, not showing up as expected.

I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
Ken

John Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken

Problem with updating adobe ilustrator CS6

Hi
I have problem with updating adobe ilustrator CS6. Error code: U43M1D204

Please see the below similar discussions:
http://forums.adobe.com/message/4913117#4913117#4913117
http://forums.adobe.com/message/4169374
Thanks!
Ankit

Problems with preview of illustor CS6

i have problems with preview of illustor CS6. When i place a illustor in indesign the preview is not correct. same when i save illustrator to pdf

Hi Heiko
Did you create a package for enterprise deployment?
Creative Suite Enterprise Deployment | Adobe Developer Connection
The Adobe Enterprise packaging tool varies depending on which version of CS or CC you are packaging.
Also you need to have a license/serial number that supports the use of enterprise deployment tools. These tools allow you to create an install package that is already serialised and doesn't prompt for AdobeID where you license agreement supports such deployments.
Also what image deployment system are you using to which client OS.
The process is pretty simple now with the improved tools from Adobe, still some improvements they can make but it's a lot better than in the past.
Good luck.

New GPU Quadro k5200 installed and having problem with my AE, PPro CS6 not using the GPUs cuda.

Hi guys, I recently bought a workstation from BOXX tech with a new GPU Quadro k5200 installed in it.
I am having problem with my AE, PPro CS6 using the GPUs cuda.
I went to Nvidia Settings and use the specific App to select it to use GPU n- Quadro k5200. But still not working.
Please help

If you edited the Cudatextfile in the Adobe Premiere CS6 directory correctly then the acceleration should be enabled. The only way it it's not is if you have the wrong driver for that version of Adobe or did not edit the text file with the exact name of the card. You can use the GPUsniffer in that same Premiere directoy with the command prompt to see the name the GPU should be listed as. The Ray Tracer file in AE has to be edited with the same listing.
Eric
ADK

Problems with Brushes & Actions on Photoshop CS6

I'm using Creative Cloud and Photoshop CS6.
I work a lot with brushes and actions.
Everytime I close Photoshop, all my brushes and actions disappear and everytime, I need to upload them onto Photoshop. Over and over again.
What is going on?
Thanks for your help!

Moved to PS forums

Problem with zoom in Photoshop CS6

Hello
I've got problem with new(?) feature in Photoshop CS6.
When I'm working on my project and have for example 150% zoom and I want to move workspace with SPACE+LMB.
In my previous version (CS3) I can do this without problem but know Photoshop shows me my file with FIT TO SCREEN zoom and some frame to choose
which screen area I want to zoom in.
It's just zooming out to full view of file. I hate this, but I can't turn it off.
My system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3828 MB
Free memory: 148 MB
Memory available to Photoshop: 3250 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 420M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: %NVIDIA_DEV.0DF1.01%
OpenCL Unavailable
Driver Version: 8.17.13.553
Driver Date: 20120802000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: %NVIDIA_DEV.0DF1.01%
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 90970819015185381107
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\VDS\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111,7G, 14,6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Efex Pro 4 NO VERSION
   Color Efex Pro 4 NO VERSION
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Camera Raw 7.1
   Nik Selective Tool 2.1.3.17256
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I was just being sarcastic. I knew it is a feature while searching for a way to fix the issue awhile back. I am very interested in knowing if any user out there could somehow fix the problem by reseting, reinstalling, etc. I got an update a few hours ago, and that didnt fix it either.
I have tried a lot of suggestions, and the only one seems to be working for me is to turn on "Scrubby Zoom"
Noel,
I run Adobe CS5 on MBP 10.6 and CS6 on MBPr 10.8. No additional plugins, English US keyboard. The laptops come with standard configuration... nonetheless, they both have the same issue.
I am sure my computers have different settings from others, but this issue does not seem to be isolate as there are other users have experience it too.
I personally, don't think it is too hard to re-create. Most likely happen when
1. Hold down space+command to zoom in
2. Release keys, then hold down space and start moving around
3. there you go, "bird's eye view" comes
One thing I notice is that the problem does not occur all the time.
-B

Elements 12 problem with brush cursor

I have recently bought Elements 12 (I have used Elements 2 for many years) which I am running on a Dell laptop with Windows 7. Every time I change the brush cursor size, the cursor becomes corrupted. It changes to strange shapes and does not work properly. I have found that I can rectify the probem each time by pressing the spacebar. The cursor then becomes circular again and works properly, but only until I change the brush size again. So I have to keep pressing the spacebar all the time when I am trying to use the brushes. Has anyone else had this problem and know of a fix please? I have not encountered any other problems with Elements 12.

Sorry I didn't spot that box and many thanks for the diagram. I have now reset the brush tool which does revert the cursor to the circular shape and sets it to a small size (13 px), but the problem reoccurs. As I increase the brush size, when it gets to 250 px, the cursor goes to an odd shape, then it reverts to circular at about 800 px. A similar thing happens if I then reduce the brush size.
I am new to this forum, as I didn't have any problems with Elements 2. After I posted my question, it listed similar questions from other members. One member descibed an identical problem with an earlier version of Elements. That post was a very long dialogue and I have just quickly read through it. He could not fix it and people's suggestions were that it was probably a deficiency with his graphics card. Unfortunately, I suspect I have the same problem with my Dell laptop. I imagine there is nothing I can do other than buying a new PC, but if you guys have any further suggestions, then that would be great. Many thanks!

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Erratic problems with "save as" in CS6

I have been having problems with the "save as" function in Photoshop CS6. Or, at least, the function is not working consistently with the way it worked in CS5 and earlier.
Specifically:
When I save an image with a new name, so as not to change the original image, the new file is saved, but the new name does not appear on the image tab. The name on the image tab remains the origninal, so that if I were to "save" more changes, they would overwrite the original image, not the new one. In CS5 and earlier, when you did a "save as", the name in the tab changed to the new name, and you continued editing the image you had just saved, not the original.
The file type on "save as" is always PSD, not JPG. If there is an option or preference to select the default save file type, I have not been able to find it.
I have reviewed the other threads in this forum about "save as" problems, and have confirmed that my plug-ins folder is empty and I do not have any alternate plug-ins folder specified in preferences. I did not move any plugins from earlier versions to this version.

> How are you saving the file (i.e., in what format)?
I opened a JPG file, made minor changes (crop, levels) and clicked "File|Save As...". The dialog box came up with PSD, not JPG. I had to change it to JPG to save.
> Is the "As a Copy" checkbox checked? If so, it will not consider the document name changed.
No. "As a copy" is not checked.
> If your file type is defaulting to PSD, that says you've done something to your file - ...
Yes, I am used to that behavior in earlier versions of Photoshop, which I have been using since version 4.
> I suspect there's no problem here in PS CS6 (I certainly haven't detected one), but rather something
> you've done to your file is what's making work the way you're seeing it.
I did not add anything to the file. The only changes I made were cropping and levels. No adjustment layers were created, no channels changed, no change to bit level - I know how to do those things, have done so in the past in earlier versions, and am familiar with the behavior of PS when you do so. This is not that.
> FYI, I just tested this in PS CS5.
Version CS5 works fine. When I open the same images in CS5, make the same changes, and click "save as..." it acts exactly as I expect it to - it defaults to JPG and the file name on the tab changes.
This is a version CS6 issue, not something I'm doing, that I know of. I am not ruling out that there might be something I'm doing or in the setup which is causing the behavior, but given I am only doing very simple editing on these images and I have not changed the default CS6 Beta setup, I have no clue what that might be.
It is erratic, as I said in the header - sometimes the program reacts the way I expect, more often it does not and I get this problem.

Printing Problem with custom size paper in Illustrator

Hi having problems with my custom sized paper print using my canon printers it's the same on both the ip100 and the pro-100s, it was printing fine until i've updated my illustrator and mac os Yosemite, it prints the image at a reduced size on the paper to what it should be does anyone have any understanding of this? I've tried everything i know, is this a driver or system problem?

Hi there wasn't an option to set the default printer to pdf where would I do this?
I've done a bit of a work around that seems to be working. I've put the page set up as A4 and then clicked on the printer utility custom settings and then unticked detect paper width, so I can put through the paper I want just got to tweak the x and y to get it right, its not the best but sitting here for four hours trying to figure it out, it will have to do for now. Thanks Jacob for your help, no doubt I'll be back in the morning, I'm burnt out now!

Problem With Brushes Pressure CS5

Hello all.
I'm using a Photoshop Cs5 with a Wacom Cintiq 12wx Tablet (I'm using PC with WinXP).
I'm having some problems withe the pressure, it doesn't work on Photoshop, (I tried it on CS3 & CS5), and I did clicked on the Tablet options in PS.
The pressure just don't responds.
I Think its becuse I can't change the Minimum Diameter in any Brush.
Plus when I change the Control part to Pen Pressure, a little warning sign is appering ( a triangel with an exclamation mark insaid ), how ever when I click on it [to see what the problem is ,nothing happens].
I have to point out that in the Cintiq Tablet Properties it's all fine, the pressure respond(in the meter)
I tried making a different settings for Photoshop, it didn't help. Can any one Pleas help me?

Usually, this is an issue with the wacom driver needing to be updated.
A few people have also found that the Windows tablet settings can also mess things up.

Having problem with "artwork size & resolution exceeds the max that can be rasterized"

Hi all,
Ok, I created a 162.7" x 90.6" document (artboard) for an exhibition display I'm designing. The document was created using all the defaults - i think this is where i went wrong. Illustrator is now telling me that "the combination of artwork size and resolution exceeds the maximum that can be rasterized" after i open the document and when i try to add a drop shadow to anything.
Other than some vector graphics i created in illustrator, I only have 3 180ppi and 4 300ppi photos tranfered right off the photograpers camera.
I selected :
1. "Print Document" from the initial splash window.
2. I entered the artboard size, bleed and left the "Raster Effects" setting to "High (300ppi)"
I think leaving the Raster Effects setting at 300ppi is where the problem is.
Do i have to create a new document or can i fix the existing one?

nados you are a little confused that's all I think things are ll right and you are probably set to go with out going to Photoshop.
1. Your file is probably fine as is
2. Make certain you images are linked and not embedded
3. Your Images are probably ok as far as they are for the the specs required do not lower the resolution just make certain they are linked.
You may have to reimport them and in the place dialog make certain link is checked.
4. The Raster Image Effects setting is fine leave it as is.
5. The jpegs are fine lee your images as is if that was what was supplied to you and they look clean.
6. When saving the file save as .AI format and in the AI save as option dialog uncheck include linked files
(you will send them the jpegs as well as the AI file.)
7. Send the images in what ever format they are now since that is jpeg leave it be just make certain the dimensions are the same as is being used in the document at 100%.
8 Make Certain you select the text and got Type> Create Outlines before saving the file.
9 Do not export the file to any other format.
10 Send the printer production house the AI file and the Jpegs you will be fine.
You should not have a problem with this file.

Problem with table size (initial extent)

Hi,
I have imported a table from my client's database, which shows the following size parameters as displayed from the user_segments table :-
bytes : 33628160
blocks : 4105
extents : 1
initial_extent : 33611776
next_extent : 65536
The number of rows in the table is 0 (zero). I am wondering how the table size could become so large, while other tables in the schema in the same tablespace have normal initial extent size.
I then created a tablespace with an initial and next extent of 64k each, and imported the data into the tablespace, after which the table size and the initial extent for the table remained to be 33611776. This is the problem with 4-5 other tables out of a total of 500 tables.
Of course if i drop and recreate the table, there is no problem, and the initial extent size and the table size becomes 64k, same as per the tablespace.
Any suggestions? I do not want to drop the tables and recreate them.
Because of this problem, even an attempt to import a blank database is consuming 2 GB of hard disk space.
Thanks in advance
DSG

I don't think you can stop the extent from being allocated when you import the table.
Even if you try to let the table inherit storage parameters from the tablespace, it will still allocate as many 64K extents as it needs to get to the 33M size in the table's (imported) storage parameter. I have also seen that when trying to change storage during an import like that, you can look in dba_tables and see the table has an ititial setting of 33M even though when you look in dba_segments you'll see that every extent allocated was in fact 64K. The dba_tables table is getting populated directly from the import and will therefore report the wrong number.
Perhaps you can import then create table as... to put the tables in a better storage set up. (Letting tables inherit from the tablespace is the best way to go...no fragmentation that way). You might want to get the client to let you revamp the storage since theres no good reason to have one huge extent like that.

Problems with brush size in CS6

Similar Messages

Maybe you are looking for