Problems with built-in memory

Hi everyone!
I have a blackberry torch 9810, 7.1 bundle.
I have a problem with my built in memory. ever since I lost my memory stick, ii started using my built in memory since it's a 6.2 GB memory. so ii once plugged my bb into my laptop, and when unplugged, everything just disapeared! picture, music, recordings, everything. It wouldn't apear but ii know it's there because when ii plug into a laptop would say 2.3 GB used. Ii security wiped my phone once and it started working perfectly again. then the problem came back again after a while! How do fix this problem?

This only happens every-time you connect your blackberry to your laptop everything disappeared correct?

Similar Messages

Problem with JTree and memory usage

I have problem with the JTree when memory usage is over the phisical memory( I have 512MB).
I use JTree to display very large data about structure organization of big company. It is working fine until memory usage is over the phisical memory - then some of nodes are not visible.
I hope somebody has an idea about this problem.

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

Problem with out of memory and reservation of memory

Hi,
we are running a very simple java program on HP-UX that do some text substitution - replacing special characters with other characters.
The files that are converted are sometimes very large, and now we have come to a point where the java server doing the work crashes with "Out of memory" message. (no stack) when it process one single 500MB large file.
I have encountered this error before(with smaller files) and then I have made the maximum Heap larger, but now when I try to set it to 4000M
i get the message:
"Error occurred during initialization of VM
Could not reserve enough space for old generation heap"
When it crash with this message, my settings are:
-XX:NewSize=500m -XX:MaxNewSize=1000m -XX:SurvivorRatio=
8 -Xms1000m -Xmx4000m
If I run with Xmx3000m instead the java program starts but I get Out of memory error like:
java.lang.OutOfMemoryError
<<no stack trace available>>
The GC log file created when it crashes looks like:
<GC: -1 31.547669 1 218103808 32 219735744 0 419430400 0 945040 52428800 0 109051904 524288000 877008 877008 1048576 0.934021
>
<GC: -1 62.579563 2 436207616 32 218103808 0 419430400 945040 944592 52428800 109051904 327155712 524288000 877008 877008 1048
576 2.517598 >
<GC: 1 65.097909 1 436207616 32 0 0 419430400 944592 0 52428800 327155712 219048400 524288000 877008 877008 1048576 2.061976 >
<GC: 1 67.160178 2 436207616 32 0 0 419430400 0 0 52428800 219048400 219048400 524288000 877008 877008 1048576 0.041408 >
<GC: -1 128.133097 3 872415232 32 0 0 419430400 0 0 52428800 655256016 655256016 960495616 877008 877008 1048576 0.029950 >
<GC: 1 128.163584 3 872415232 32 0 0 419430400 0 0 52428800 655256016 437152208 960495616 877008 877008 1048576 3.971305 >
<GC: 1 132.135106 4 872415232 32 0 0 419430400 0 0 52428800 437152208 437152208 960495616 877008 876656 1048576 0.064635 >
<GC: -1 256.378152 4 1744830464 32 0 0 419430400 0 0 52428800 1309567440 1309567440 1832910848 876656 876656 1048576 0.058970
>
<GC: 1 256.437652 5 1744830464 32 0 0 733282304 0 0 91619328 1309567440 873359824 1832910848 876656 876656 1048576 8.255321 >
<GC: 1 264.693275 6 1744830464 32 0 0 733282304 0 0 91619328 873359824 873359824 1832910848 876656 876656 1048576 0.103764 >
We are running:
java version "1.3.1.02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1.02-011206-02:17)
Java HotSpot(TM) Server VM (build 1.3.1 1.3.1.02-JPSE_1.3.1.02_20011206 PA2.0, mixed mode)
We have 132GB of physical memory and a lot of not used Swap space, so I cant imagine we have a problem with that.
Can anyone please suggest what to do proceed troubleshooting or to change some settings? I'm not into this Java really so I really need some help.
Usually the java program handles thousands of smaller files (around 500 KB - 1 MB sized files).
Thanks!

You have a one to one mapping? Where one character is replaced with another?
And all you do is read the file, replace and then write?
Then there is no reason to have the entire file in memory.
Other than that you need to determine if the VM (which is not a Sun VM) has an upper memory bound. That would be the limit that the VM will not go beyond regardless of memory in the system.
We have 132GB of physical memory and a lot of not used Swap spaceOne would wonder why you have swap space at all.

Problem with built in Sound

I have this simple PE NEO-2 motherboard .. and i use the built in sound of the board... the problem i m having is that the sound suddenly disappears during the game.. or other music application... sometime it disappear after 2 min or some time after couple of hours...
So is my board faulty... or problem with drivers or bios update.??
Thanks

k.
well basiclly, when i had the same sound card on my 865PE Neo 2, it had the same problems. take battlefield Vietnam for example, the jet sounds would disappear after a while and come bak very very choppy, as did the weapon sounds. they actually reversed the sound. playing prom back to front.
The problem is the card it self. MSI take no pride what so ever in their sound.
the only way to fix, is either lower sample rate, which resluts in cracklier sound, updating drivers, which sometimes dont work, or just simply upgrading your sound card.
because of this problem i went out and baught my self a Creative Sound Blaster Audigy2 ZS Platinum pro.
frankly.
it i WELL worth the money.
if you want a budget card but still verry good, look for the Sound Blaster Live range. verry verry good.
Hope i am of some service to you all

Slow system – problem with OS, software, memory, hard drive?

I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
Thanks in advance for any advice, and apologies for long post.
Rob

Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

Oracle 11g problem with creating shared memory segments

Hi, i'm having some problems with the oracle listener, when i'm trying to start it or reload it I get the follow error massages:
TNS-01114: LSNRCTL could not perform local OS authentication with the listener
TNS-01115: OS error 28 creating shared memory segment of 129 bytes with key 2969090421
My system is a: SunOS db1-oracle 5.10 Generic_144489-06 i86pc i386 i86pc (Total 64GB RAM)
Current SGA is set to:
Total System Global Area 5344731136 bytes
Fixed Size 2233536 bytes
Variable Size 2919238464 bytes
Database Buffers 2399141888 bytes
Redo Buffers 24117248 bytes
prctl -n project.max-shm-memory -i process $$
process: 21735: -bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 64.0GB - deny
I've seen that a solution might be "Make sure that system resources like shared memory and heap memory are available for LSNRCTL tool to execute properly."
I'm not exactly sure how to check that there is enough resources?
I've also seen a solution stating:
"Try adjusting the system-imposed limits such as the maximum number of allowed shared memory segments, or their maximum and minimum sizes. In other cases, resources need to be freed up first for the operation to succeed."
I've tried to modify the "max-sem-ids" parameter and set it to recommended 256 without any success and i've kind of run out of options what the error can be?
/Regards

I see, I do have the max-shm-ids quite high already so it shouldn't be a problem?
user.oracle:100::oracle::process.max-file-descriptor=(priv,4096,deny);
process.max-stack-size=(priv,33554432,deny);
project.max-shm-memory=(priv,68719476736,deny)

I have problem with Ultra Secure Memory Key Login Software (as non admin) hdlSrv.exe

I have problem with a memory key lenovo 1g. Here is a Company and the Users can't be Admin. So We have a big problem. I download "KeySafe II and MyKey in Non-Admin Mode" but its not run. I found in Lenovo pag, i installed as said in the instructions but i repeat I return to be normal user and couldn't use it in mode User! I trying and i saw that the service hdlsrv be on and run! but i can't. So ¿are there an archive that i can use and can use it this pendrive in Non-Admin mode?
We have SO Wxp
KeyLock : Ultra Secure Memory Key Login Software 1.0.3.6
Fru 45j5923
Lenovo 1g
Please!!! help Mee!!
thank u!

Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 734 ms
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: oracle.jdbc.driver.OracleDriver
     at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
     at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart

Having Problems with built in iSight

Hi,
I am having problems with the computer finding my built in iSight camera, I just updated to Mountain Lion and now no applications recognise it.
I have tried turning it off and on again, and switching to different users, but none can identify a connected camera.
Help?
Specs Here
Thanks
Frankie

Hi englishguru,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful for troubleshooting the camera on your MacBook:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Since you've determined that the behavior isn't user specific, try these steps:
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Regards,
Jeremy

Problems with built-in iSight and iChat! Nothing works!!

Hello,
i have a problem with my iChat, iChat said that no camera is connected, but the built-in iSight works with Photobooth!
I read many Threads here but no solution works,
there is also an entry in the system profiler USB --> built-in iSight
I closed all other Aplications like Photobooth, iMovie and so on,
than i checked the activity monitor.
I changed the settings in iChat (bandwith) and Quicktime (bandwith)
I did a PRAM reset...nothing changed!
I did a SMC reset...also nothing changed!
The built-in iSight doesnt works with Skype, too!
Please help me!

Hey, I hope people aren't getting annoyed by my compulsive posting, but I think this solution needs to be spread, it doesn't get enough publicity:
the issue is that with 10.5.1, a certain quicktime component that acts as a USB controller for the iSight camera is given an expiry time (i.e., the file is given a feature similar to "trial periods"). This file is then deleted, and iSight ceases to function. All that need be done is to replace the component, by downloading it here:
http://techslaves.org/index.php?PHPSESSID=q8frk8vf81l0f8echu6mj0plk0&action=tpmo d;dl=item16
(disregard the version marking, it works for 10.5.2 in the very least)
Copy it to ~/System/Library/Quicktime, then reboot and it should work.

Problem with my ram memory

I got 3 gigs of ram and after some of memory burn I'm able to have only 2 gigs of these ram. But today I try to find why. And after a multiples tests I found that on my riser A the slot 2 is lighting on but I try to put my +riser B+ intead of my +riser A+ at the place of my +riser A+ and the same problem arrive. So, after my test I found it's probably my motherboard but I found my +riser B+ works well and I put these configuration and I found my 3 gigs:
*_Riser A_*: nothing
*_Riser B_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= 512 mb
Slot 4= 512 mb
So my question is: I know that's not the configuration for the ram memory, it's suppose to be:
*_Riser A_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= nothing
Slot 4= nothing
*_Riser B_*:
Slot 1= 512 mb
slot 2= 512 mb
Slot 3= nothing
Slot 4= nothing
but can I have any problem with my new configuration like my ram memory are not working like they should or anything like this?
Thank's!

No, if it is the slot, there is nothing you can do that I know of - I believe the slots are part of the logic board (not sure on a laptop, but they are on an iMac) - to find out, do take it to an Apple store; the Genius Bar advice and diagnosis is free. At least you would know if it is the slot and how much it would cost to repair or replace it. Here is some info that may help:
https://discussions.apple.com/thread/5279862
http://support.apple.com/kb/PH14206

Problems with built-in isight: colours and fuzziness

I have just bought a new MacBook, however I seem to have quite a problem with my iSight. When I use it (for example, through Photo Booth) I get an image that is very reddish (it seems like the only colours I get are in the range black-orange-red, and no, I'm not using any special effects like Sepia :)) and that is very fuzzy, or even better, foggy.
Any fix for this? I have had an iMac with an iSight that only showed black and the solution seemed to be to reset the PMU. However, I cannot find information on how to reset the PMU on my new MacBook.

Any fix for this? I have had an iMac with an iSight
that only showed black and the solution seemed to be
to reset the PMU. However, I cannot find information
on how to reset the PMU on my new MacBook.
The MB uses a SMU.
Resetting the System Management Controller >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Problems with N95-1 Memory while using Web? Try Op...

Guys,
I just wanted to let you know that the new Opera Mini is absolutely, bar none, completely fantastic. I'm not sure how much memory it uses, but so far I've had no problems playing Mp3s, running my Gmail client, and using Opera all at the same time!
Not only that, but it renders web pages much better and quicker than the application built into the N95. I have replaced Web as my browser and am now using Opera Mini 4.0... If you haven't tried it, download it now on your N95. It is truly fantastic. I don't miss not being able to quickly go back without reloading the whole page, and the way it presents the entire page as a thumbnail with the ability to zoom in and out VERY QUICKLY on certain parts of the page make it as sharp as the Iphone browser.
The ONLY limitation is that you can't download files using it. This is when you'll have to open the link in WEB.. but whatever.
If you haven't already, give it a shot. This is pretty new software, and works wonderfully on the N95.
http://www.operamini.com/

I find opera mini really slow. It takes ages to open pages even on the wifi. How is yours? Is it fast at opening pages?
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

Problem with scanning and memory usage

I'm running PS CS3 on Vista Home Premium, 1.86Ghz Intel core 2 processor, and 4GB RAM.
I realise Vista only sees 3.3GB of this RAM, and I know Vista uses about 1GB all the time.
Question:
While running PS, and only PS, with no files open, I have 2GB of RAM, why will PS not let me scan a file that it says will take up 300Mb?
200Mb is about the limit that it will let me scan, but even then, the actual end product ends up being less than 100Mb. (around 70mb in most cases)I'm using a Dell AIO A920, latest drivers etc, and PS is set to use all avaliable RAM.
Not only will it not let me scan, once a file I've opened has used up "x" amount of RAM, even if I then close that file, "x" amount of RAM will STILL be unavaliable. This means if I scan something, I have to save it, close PS, then open it again before I can scan anything else.
Surely this isn't normal. Or am I being stupid and missing something obvious?
I've also monitored the memory usage during scanning using task manager and various other things, it hardly goes up at all, then shoots up to 70-80% once the 70ishMb file is loaded. Something is up because if that were true, I'd actually only have 1Gb of RAM, and running Vista would be nearly impossible.
It's not a Vista thing either as I had this problem when I had XP. In fact it was worse then, I could hardly scan anything, had to be very low resolution.
Thanks in advance for any help

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

Problem with Access of memory card and internal storage after update

Hej,
I cant save anything on intern or extern memory.
Was about to write some file into a folder belonging to some application.
Made this with a copy from external to internal memory alst friday without any problem. But I even could not save a file on the memory card, memory ist locked.
All this is new after some SW Update last Saturday.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Did you use the preinstalled app "File Commander" when you tried this or a 3:rd party file manager? Due to new restrictions for the external SD card in Android 4.4 you need to use the preinstalled file manager or use a computer to write to any folder on the external SD.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Having a problem with Excessive "modified" memory usage in Win7 x64, upwards of 3.6GB, any suggestions?

I have 6GB of ram, a fresh install of Windows 7 x64, and the screenshot shows what happens after leaving my PC on for a couple days. (3782+MB being used by modified memory ATM).
http://wow.deconstruct.me/images/ExcessiveMemory.jpg
Any ideas on this?
Edit:
Added this after first round of suggestions
http://wow.deconstruct.me/images/NotSoExcessiveMemory.jpg
This is uptime of around 2 hours.
The first image is of uptime of around 3-5 days.

Matthew,
The only reason why these pages are kept on the modified list indefinitely is because the system doesn't have any available pagefile space left. If you increase the size of the pagefile the system will write most of these pages to disk and then move them from the modified list to the standby list. Standby pages are considered part of "available memory", because they can be reused for some other purpose if necessary.
Whether this would "fix" the problem or not depends on what the actual problem is. If it's an unbound memory leak then increasing the size of the pagefile will simply allow the system to run longer before it eventually hits the maximum pagefile size limit, or runs out of disk space. On the other hand, if it's a case of some application allocating a lot of memory and not using it for a long time, then increasing the pagefile might be a perfectly valid solution.
Allowing the system to manage the size of the pagefile actually works well in most cases. Pagefile fragmentation (at the filesystem level) can only occur when the initially chosen size is not large enough and the system has to extend it at run time. For win7 we have telemetry data that shows that even for systems with 1 GB of RAM, less than 0.1% of all boot sessions end up having to extend the pagefile, and this number is even lower for larger amounts of RAM. If you think you are in that 0.1% and your pagefile might be getting fragmented, you can manually increase its minimum size such that the total system commit charge stays below 80% even if you run all your apps at once (80% is the threshold at which the pagefile is automatically extended). This will make sure the pagefile is created once and then stays at the same size forever, so it can't fragment. The maximum size can either be set to the same value as the minimum, or you can make it larger so that the system is more resilient to memory leaks or unexpectedly high loads.
By the way, Windows doesn't use pagefiles as "extra memory", it uses them as a backing store for private pages, just like regular files are used as a backing store for EXEs/DLLs and memory mapped files. So if the system really has more than enough RAM (like in your second screenshot, where you have 3.6 GB of free pages) you shouldn't see any reads from the pagefile. You can verify this by going to the Disk tab in the resource monitor and looking for any disk IO from pagefile.sys. On smaller systems that don't have an excess of free pages you may see periodic reads from the pagefile, and this is expected because the total amount of data referenced by the OS/drivers/processes is larger than the total RAM. Forcefully keeping all pagefile-backed pages in memory (which is what disabling the pagefile does) would simply mean some other pages (memory mapped files, DLL code or data etc) would have to be paged out.
Regarding further troubleshooting steps: If the system runs fine with a larger pagefile (commit charge stabilizes well below 80%, and you no longer see gigabytes of modified pages accumulating in memory) then you don't really need to do anything. If the problem persists, you can check for any processes with an abnormally high commit charge, and also check kernel memory usage in task manager. If it's a kernel leak you can usually narrow it down to a particular driver using poolmon.exe or kernel debugger.

Problems with built-in memory

Similar Messages

Maybe you are looking for