Problems with Business Services using Email
Hi,
I'm trying to create a business service to use an email protocol.
In ALSB Console, I go to the "Create Business Service" page and select the "Messaging Service" Service Type. When I get to the Transport Configuration, and select the protocol dropdown, I only see HTTP, HTTPS, JMS and Tuxedo. The documentation says email should be only of the supported protocols here, so whats wrong ?
When creating the business service you specify the service type of your service. If the service type you select is not supported by the email transport it won't show up in the drop-down list. If you selected MIXED type, you can't specify a response, you can't select WSDL based service either or any soap based service.
Similar Messages
-
Problem with complete task via email
Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan PetrlaHi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan -
How to pass parameters to servlet with POST with Business Service OSB
Hi all.
I am newby in OSB. I am trying to send some values through a POST call to a servlet. I know how to call the servlet with Business Service of type "Messaging Service". I send the parameters of type Text.
I have tried several ways, but I don`t find the proper way yo do it. I have tried to insert the param into the body and into the header.
The problem is that I don`t know exactly where to put them, I don`t know if it must be done in the header or in the boy. I neither don`t know if there is a common way to do this.
Please, could you give me a good example of an insert activity to isert a post parameter inside the call?
For example: now I am using this one:
Expression => "accountType=test"
Location => as first child of"
XPATH => empty.
In variable => body.
Where do I have to insert this, in the body or in the outbounds?
I have followed this posts:
https://blogs.oracle.com/jeffdavies/entry/enhanced_rest_support_in_oracl
http://www.yenlo.nl/en/using-osb-with-rest/
Thanks a lot.Hi,
Please be carefull about passing values such as Strings or number that contains ',' .
using the way described above.
the best way is to pass an ID and then use a select Statement to get the other Values in the target page.
regards
MDK. -
ISSUES OCCUR WITH COMPUTER STABILITY (INTERNET BROWSER, EXPLORER WINDOW, ECT UNRESPONSIVE) ALL PROCESSOR CORES ARE AT 100% WHEN EXPORTING MEDIA IN PREMIERE PRO/AFTER EFFECTS CC. IS THERE A SOLUTION TO IMPROVE COMPUTER STABILITY?
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150202-1526)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: To be filled by O.E.M.
BIOS: BIOS Date: 07/15/13 10:55:41 Ver: 04.06.05
Processor: AMD FX(tm)-8350 Eight-Core Processor (8 CPUs), ~4.0GHz
Memory: 32768MB RAM
Available OS Memory: 32732MB RAM
Page File: 26177MB used, 39285MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Display Tab 2: No problems found.
Display Tab 3: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Sound Tab 4: No problems found.
Sound Tab 5: No problems found.
Sound Tab 6: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce GTX 980
Manufacturer: NVIDIA
Chip type: GeForce GTX 980
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_13C0&SUBSYS_31701462&REV_A1
Display Memory: 4095 MB
Dedicated Memory: 3072 MB
Shared Memory: 1023 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: BenQ GL2760
Monitor Model: BenQ GL2760
Monitor Id: BNQ78D5
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HDMI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.4788 (English)
Driver Version: 9.18.13.4788
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/13/2015 13:41:47, 17258024 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-5080-11CF-6665-7D111CC2C435}
Vendor ID: 0x10DE
Device ID: 0x13C0
SubSys ID: 0x31701462
Revision ID: 0x00A1
Driver Strong Name: oem36.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section152:9.18.13.4788:pci\ven_10de&dev_13c0
Rank Of Driver: 00E02001
Video Accel:
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Card name: NVIDIA GeForce GTX 980
Manufacturer: NVIDIA
Chip type: GeForce GTX 980
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_13C0&SUBSYS_31701462&REV_A1
Display Memory: 4095 MB
Dedicated Memory: 3072 MB
Shared Memory: 1023 MB
Current Mode: 1768 x 992 (32 bit) (30Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: NS-40D510NA15
Monitor Id: BBY4043
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HDMI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.4788 (English)
Driver Version: 9.18.13.4788
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/13/2015 13:41:47, 17258024 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-5080-11CF-6665-7D111CC2C435}
Vendor ID: 0x10DE
Device ID: 0x13C0
SubSys ID: 0x31701462
Revision ID: 0x00A1
Driver Strong Name: oem36.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section152:9.18.13.4788:pci\ven_10de&dev_13c0
Rank Of Driver: 00E02001
Video Accel:
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Card name: NVIDIA GeForce GTX 980
Manufacturer: NVIDIA
Chip type: GeForce GTX 980
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_13C0&SUBSYS_31701462&REV_A1
Display Memory: 4095 MB
Dedicated Memory: 3072 MB
Shared Memory: 1023 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: BenQ GL2760
Monitor Model: BenQ GL2760
Monitor Id: BNQ78D5
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HDMI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 9.18.0013.4788 (English)
Driver Version: 9.18.13.4788
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/13/2015 13:41:47, 17258024 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-5080-11CF-6665-7D111CC2C435}
Vendor ID: 0x10DE
Device ID: 0x13C0
SubSys ID: 0x31701462
Revision ID: 0x00A1
Driver Strong Name: oem36.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section152:9.18.13.4788:pci\ven_10de&dev_13c0
Rank Of Driver: 00E02001
Video Accel:
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (Realtek High Definition Audio)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_1458A132&REV_1000
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.7404 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 12/11/2014 15:15:52, 4351960 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: BenQ GL2760-0 (NVIDIA High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10DE&DEV_0071&SUBSYS_14623170&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: nvhda64v.sys
Driver Version: 1.03.0033.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/5/2015 15:01:44, 195728 bytes
Other Files:
Driver Provider: NVIDIA Corporation
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Realtek Digital Output(Optical) (Realtek High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_1458A132&REV_1000
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.7404 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 12/11/2014 15:15:52, 4351960 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: NS-40D510NA15-4 (NVIDIA High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10DE&DEV_0071&SUBSYS_14623170&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: nvhda64v.sys
Driver Version: 1.03.0033.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/5/2015 15:01:44, 195728 bytes
Other Files:
Driver Provider: NVIDIA Corporation
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Realtek Digital Output (Realtek High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_1458A132&REV_1000
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.7404 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 12/11/2014 15:15:52, 4351960 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: BenQ GL2760-8 (NVIDIA High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10DE&DEV_0071&SUBSYS_14623170&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: nvhda64v.sys
Driver Version: 1.03.0033.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/5/2015 15:01:44, 195728 bytes
Other Files:
Driver Provider: NVIDIA Corporation
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: USB Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC31D
FF Driver: n/a
Device Name: USB Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC31D
FF Driver: n/a
Device Name: USB Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC31D
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x1002, 0x4397
| Matching Device ID: usb\root_hub
| Service: usbhub
|
+-+ USB Input Device
| | Vendor/Product ID: 0x046D, 0xC05A
| | Location: Port_#0002.Hub_#0001
| | Matching Device ID: generic_hid_device
| | Service: HidUsb
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x046D, 0xC05A
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC31D
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 69.8 GB
Total Space: 228.7 GB
File System: NTFS
Model: KINGSTON SV300S37A240G SATA Disk Device
Drive: F:
Free Space: 1657.3 GB
Total Space: 1907.6 GB
File System: NTFS
Model: ST2000DM 001-1ER164 SATA Disk Device
Drive: R:
Free Space: 3481.4 GB
Total Space: 3815.2 GB
File System: NTFS
Model: MARVELL Raid VD SCSI Disk Device
Drive: D:
Model: HL-DT-ST DVD+-RW GSA-H73N ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
Name: VIA USB eXtensible Host Controller
Device ID: PCI\VEN_1106&DEV_3483&SUBSYS_50071458&REV_01\4&6F5B703&0&0048
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1604&SUBSYS_00000000&REV_00\3&11583659&0&C4
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_5A1C&SUBSYS_5A141002&REV_00\3&11583659&0&48
Driver: n/a
Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4397&SUBSYS_50041458&REV_00\3&11583659&0&B0
Driver: n/a
Name: ATI I/O Communications Processor PCI Bus Controller
Device ID: PCI\VEN_1002&DEV_4384&SUBSYS_00000000&REV_40\3&11583659&0&A4
Driver: n/a
Name: VIA 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_10001458&REV_C0\4&1AF465A6&0&70A4
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1603&SUBSYS_00000000&REV_00\3&11583659&0&C3
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_5A16&SUBSYS_5A141002&REV_00\3&11583659&0&10
Driver: n/a
Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4397&SUBSYS_50041458&REV_00\3&11583659&0&98
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_1002&DEV_4383&SUBSYS_A1321458&REV_40\3&11583659&0&A2
Driver: n/a
Name: Realtek PCIe GBE Family Controller
Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06\4&2DDBB3B7&0&00A8
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1602&SUBSYS_00000000&REV_00\3&11583659&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1002&DEV_5A14&SUBSYS_5A141002&REV_02\3&11583659&0&00
Driver: n/a
Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4397&SUBSYS_50041458&REV_00\3&11583659&0&90
Driver: n/a
Name: NVIDIA GeForce GTX 980
Device ID: PCI\VEN_10DE&DEV_13C0&SUBSYS_31701462&REV_A1\4&2534E90F&0&0010
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1601&SUBSYS_00000000&REV_00\3&11583659&0&C1
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_43A3&SUBSYS_00001002&REV_00\3&11583659&0&AB
Driver: n/a
Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_1002&DEV_4396&SUBSYS_50041458&REV_00\3&11583659&0&B2
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_10DE&DEV_0FBB&SUBSYS_31701462&REV_A1\4&2534E90F&0&0110
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1600&SUBSYS_00000000&REV_00\3&11583659&0&C0
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_43A0&SUBSYS_00001002&REV_00\3&11583659&0&A8
Driver: n/a
Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_1002&DEV_4396&SUBSYS_50041458&REV_00\3&11583659&0&9A
Driver: n/a
Name: Marvell 92xx SATA 6G Controller
Device ID: PCI\VEN_1B4B&DEV_9230&SUBSYS_92301B4B&REV_11\4&1B49F582&0&0068
Driver: n/a
Name: Texas Instruments 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_104C&DEV_823F&SUBSYS_78563412&REV_01\5&2A46CC04&0&000058
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_5A1F&SUBSYS_5A141002&REV_00\3&11583659&0&58
Driver: n/a
Name: PCI standard ISA bridge
Device ID: PCI\VEN_1002&DEV_439D&SUBSYS_439D1002&REV_40\3&11583659&0&A3
Driver: n/a
Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_1002&DEV_4396&SUBSYS_50041458&REV_00\3&11583659&0&92
Driver: n/a
Name: Marvell 91xx SATA 6G Controller
Device ID: PCI\VEN_1B4B&DEV_9172&SUBSYS_B0001458&REV_12\4&22A3F64&0&0050
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_104C&DEV_823E&SUBSYS_78563412&REV_01\4&33E4407A&0&0058
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_5A1E&SUBSYS_5A141002&REV_00\3&11583659&0&68
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_1002&DEV_439C&SUBSYS_50021458&REV_40\3&11583659&0&A1
Driver: n/a
Name: AMD SATA Controller
Device ID: PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_40\3&11583659&0&88
Driver: n/a
Name: Renesas Electronics USB 3.0 Host Controller
Device ID: PCI\VEN_1912&DEV_0015&SUBSYS_00000000&REV_02\4&693E52D&0&00AB
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1605&SUBSYS_00000000&REV_00\3&11583659&0&C5
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_5A1D&SUBSYS_5A141002&REV_00\3&11583659&0&50
Driver: n/a
Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4399&SUBSYS_50041458&REV_00\3&11583659&0&A5
Driver: n/a
Name: ATI I/O Communications Processor SMBus Controller
Device ID: PCI\VEN_1002&DEV_4385&SUBSYS_43851002&REV_42\3&11583659&0&A0
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.18221
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
MainConcept MPEG Demultiplexer,0x00800100,1,2,mc_demux_mp2_ds.ax,9.09.0012.5440
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.18741
WS ScreenCapture,0x00200000,0,1,ScreenCaptureFilter.ax,5.07.0000.0002
LogMeIn Video Encoder,0x00200000,1,1,racodec.ax,4.01.0000.5022
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.18741
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.18741
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,12.00.9200.17037
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
Fire-i Yuv decompressor,0x00200000,1,1,fiyuv.ax.x86,5.80.0000.0021
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.18741
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.18741
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.18741
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
CineForm JPG2Stream Filter,0x00200000,0,1,JPEGS2Stream.dll,
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
LogMeIn Video Decoder,0x00800000,1,1,racodec.ax,4.01.0000.5022
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.18741
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.18741
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.18741
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.18741
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.18741
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.18741
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.18741
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.18741
DivX Demux Filter,0x00800002,0,3,DirectShowDemuxFilter.dll,1.00.0003.0145
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
DivX Demux Filter (Unrestricted Edition),0x00200000,0,3,DirectShowDemuxFilter.dll,1.00.0003.0145
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.18741
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.18741
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.18741
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.18501
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.18501
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.18741
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.18741
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.18741
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.18741
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.18741
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.18741
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.18741
Firei Net Dump,0x00200000,1,0,finetdmp.ax.x86,5.80.0000.0013
MainConcept Stream Parser,0x00400000,1,2,mc_demux_mp2_ds.ax,9.09.0012.5440
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.18741
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.18741
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.18741
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.18741
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.18741
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
LogMeIn Video Encoder,0x00200000,1,1,racodec.ax,4.01.0000.5022
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.18741
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.18741
PCM,0x00200000,1,1,quartz.dll,6.06.7601.18741
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.18741
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.18741
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.18741
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.18741
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.18741
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.18741
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.18741
WDM Streaming Capture Devices:
,0x00000000,0,0,,
,0x00000000,0,0,,
,0x00000000,0,0,,
Realtek HD Audio Line input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Realtek HD Audio Mic input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Realtek HD Audio Stereo input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
WDM Streaming Rendering Devices:
,0x00000000,0,0,,
,0x00000000,0,0,,
,0x00000000,0,0,,
Realtek HD Audio output,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Realtek HDA SPDIF Optical Out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Realtek HDA SPDIF Out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Speakers (Realtek High Definiti,0x00200000,1,0,quartz.dll,6.06.7601.18741
BenQ GL2760-0 (NVIDIA High Defi,0x00200000,1,0,quartz.dll,6.06.7601.18741
BenQ GL2760-8 (NVIDIA High Defi,0x00200000,1,0,quartz.dll,6.06.7601.18741
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.18741
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.18741
DirectSound: BenQ GL2760-0 (NVIDIA High Definition Audio),0x00200000,1,0,quartz.dll,6.06.7601.18741
DirectSound: BenQ GL2760-8 (NVIDIA High Definition Audio),0x00200000,1,0,quartz.dll,6.06.7601.18741
DirectSound: NS-40D510NA15-4 (NVIDIA High Definition Audio),0x0Re: Problems with computer stability using Pr/AE CC. -Computer Specs Listed. SOLUTIONS?
Peferling
==================
Boy, you are not kidding, I was running both the cloud and CS6, and I was ready to throw in the towel.
I have changed computer's twice now, have a solid state hd, (which I love) with 10 terabytes on externals, I run NOTHING except adobe's stuff on my HD now, and only one version of it, and it runs like a dream.
So, I updated the OS to win 8.1, updated my peripherals,
I dumped CS6 (hated to, but for some reason my 3D won't work on it, it works fine with the cloud) but in CS6 the software was turning it off after adobe's last update.
I've made a virtual machine for my development environments which do not play well with adobe's stuff.
My rule of thumb has always been double what the manufacturer states is required for RAM, but imho, with my current upgrades: upgraded to win8.1, and other peripherals, spent two weeks changing stuff over and it's about 100 times better than trying to run CC and CS6. - No kidding, the change is astronomical
But for anything PC I'm way over powered, and for Adobe, I'm still underpowered.
Next, I'll just get a mac for Adobe, and stick with my pc's for ms/CentOS. Too, it seems like since the cloud was initiated Adobe is rolling out the updates faster and changes without warning. The processor/3D issue, I had no warning on it, just woke up one day and "no more 3d" :S
But I do love the cloud, so, guess there's got to be some dark lining to it. <g> -
Logical system with business service
hi,
can we have a logical system with business service just like we have with business system?? If yes,how can we create logical system for business service??
Ratna.Hi,
If you intend to use it with IDoc adapter it might be also necessary to set up corresponding Logical System (tcode: BD54) in adequate backed system.
Refer conversion routine (logical system vs. service) in this presentation [Using the IDoc-Adapter|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2b4035c-0d01-0010-31b5-c470d3236afd] - page no 6.
Regards,
Jakub -
Replace E1- Adapter with Business Services
Hello,
We are using E1-adapter to communicate with web Methods ( like calling business function, table IO etc..), now we are planning to replace E1- adapter with Business Services. We are using tools 8.98.11 and Application Release E812.
Question is , is it possbile to create a wraper to call any business functions just like E1-adapter? Any help is greatly appriciated.
Thank you.
Edited by: user3448054 on Oct 12, 2009 1:09 PMYes, you can use the JDE Business Service Server to simulate the E1-Adapter associated with webMethods. Oracle provides out of the box Business Services for a majority of the E1 transactions. We have implemented Business Services Server with our webMethods and it is working very well.
-Eric -
Compilation problem with templates while using option -m64
Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex VinokurBug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed. -
Can we design the scenario with Business service
Hi,
I have IDOCXIFile Scenario
Can we design the scenario with Business service for SAP R/3 and As well as for File system also????
I dont have details abt the SAP R/3 system to create the Tech system in SLD
Regards
SumanHello Suman,
Go through this Blog..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
These are the steps which u have to do
STEPS IN DESIGN
1. Import idoc from the SAP System (SAP02) through imported objects.
2. Create Data Type, Message Type, Message Interface for the Outbound File.
3. Create Message Mapping with file Message and idoc (Matmas04)
5.Create Interface mapping between File Interface and the idoc.
Steps to be followed in Creation of Technical and Business System
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Preconfiguration steps for transfer of data to IDOCS
1.Create a RFC Destination in SM59 of XI Server of type.
2.In transaction IDX1 ,create a port for the client of XI server.
3. The port has to be displayed in the idx2 transaction and we should be able to view the idocs which we imported through integration repository.
Steps in Configuration
1. Goto service without party, right click->Assign a business system.
2. Choose the business system to be added.
3. Create a File Sender Service with communication channel for the same.
4. Create an idoc receiver channel under the business system.
7. The Idoc type( which data is to be written) is mentioned as inbound parameter.
8. Mention the logical Name in the Service->Adapter Specific Parameters of both the File Sender Service as well as the business system.
9. Make the Sender Agreement for theFile Sender with communication channel.
10.Create the Receiver Determination and Interface Determination for the business system.
11.Create the Receiver Agreement for the Business system.
Step for Configuration fo IDOC in R/3
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Reward Points if it is useful..
Thanks,
Satya Kumar -
URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS
Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh RanaI got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh -
Custom hostname verifier not used when business services use a http proxy
On OSB 10.3, we have a business services with an https end point. To access this end point, the business service used an http proxy.
The certificate of the business endpoint is a wildcard certificate *.certificate.be . So we have a custom hostname verifier defined in the ssl configuration on the weblogic Server
As we can see with the verbose mode at the jvm, the custom hostname verifier is not used when we use a http proxy in the business service. Osb use a ALSBHostnameVerifier and this one the defaulthostName
<Mar 2, 2011 7:31:11 AM CET> <Debug> <AlsbTransports> <BEA-000000> <*** Connecting via proxy *** HTTP @ my.proxy.be/XXX.XXX.XXX.XXX:8080>
[Loaded com.bea.wli.sb.transports.http.ALSBHostnameVerifier from file:/bea/osb_10.3/lib/sb-transports-main.jar]
[Loaded weblogic.security.utils.SSLWLSHostnameVerifier$DefaultHostnameVerifier from file:/bea/wlserver_10.3/server/lib/weblogic.jar]
Is there any way to force business service to used hostname verfifier defined in weblogic ssl server config?
ThanksThis is a known issue. Raise a case with support and ask a patch for bug#9182604
Regards,
Anuj -
Calling two Business service using split join in osb
Hi,
While trying to call two business service using Split Join in osb i am getting selection failure message in Bpel em console. i am using invoke activity to invoke the BS and assign to assign the input. in the assign i am assigning *$request.payload/input* to input.payload . In the em console i am getting input like this
receiveInput
Jun 19, 2012 5:05:45 PM Received "process" call from partner "bpelprocess1_client"
<payload>
<inputVariable>
<part name="payload">
<client:process>xxxxx</client:process>
</part>
</inputVariable>
Assign (pending)
Jun 19, 2012 5:05:48 PM Error in evaluate <from> expression at line "65". The result is empty for the XPath expression : "/client:process/client:input".
<payload>
<client:process>xxxxxx</client:process>
Jun 19, 2012 5:05:48 PM The following exception occurred while attempting to execute operation copy at line 63
<payload>
<bpelFault>
<faultType>0</faultType>
<selectionFailure/>
</bpelFault>
Jun 19, 2012 5:05:57 PM "BPELFault" has not been caught by a catch block.
Jun 19, 2012 5:06:00 PM The transaction was rolled back. The work performed for bpel instance "650002" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.
Can anyone help on this?
Thanks in Advance...maybe this one helps a bit, it's the same pattern
http://www.xenta.nl/blog/2011/07/03/oracle-service-bus-implementing-aggregator-pattern-by-use-of-split-join/
if you're using a dynamic split join easiest way is to do something like
assing <yourresponse/> to $response
at this moment your assign an empty placeholder to the response variable
now you go into the for-each looping and for each iteration you need to insert the response of your bpel call in the $response variable
so in the looping as last step you add something like
insert $mybpelresponse/rootelement into $response/yourresponse
with the insert it will insert the reponse 1..x times into the $response variable (so actually aggregating all the responses for you) -
Problem with contact list in email w/ 3.0
After upgrading to 3.0 I'm having a problem with the "To" in emails. I start typing in a name in the "To" field and it does not bring up matching entries in my contact list (it used to do so with the previous version SW).
I have to try to send the email at which time an error message comes up. I have to cancel the send, delete the name in the "To" field and type the name in again. The second time it brings up the contact list and eveything works fine.
Anyone else having this problem?Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db -
Is there a problem with Apple Mail using IMAP
Is there a problem with Apple Mail using IMAP? Having a problem syncing to our mail server: doesn't sync properly when multiple devices use same mail acct. Spoken w/ mail hosting provider who says Apple Mail doesn't follow IMAP protocol properly leaving Apple Mail users to experience a variety of problems when connecting to IMAP accounts. Among them:
- Improper syncing
- Proliferation of drafts during composition of an email.
- Connections on the mail host do not close automatically and proliferate over time until the host rejects further connection requests.
Hosting provider goes on to suggest turning off IDLE command. In my experience turning this feature off did not improve the situation. In fact, it created a few.
Question: Is the hosting provider correct in faulting Apple Mail?
Been fielding the question with a number of people. I'm aware of three people who are experiencing similar problems, each using different mail hosts. Tech reps at inmotionhosting.com and nexcess.com point the finger at a Apple Mail, along with an IT specialist in Los Angeles, CA, and a tech support rep at an Apple Store in Arizona who said that Apple and Google mail are aware of and coordinating to resolve the problem.
Anyone out there have any insights into this?Is there a problem with Apple Mail using IMAP? Having a problem syncing to our mail server: doesn't sync properly when multiple devices use same mail acct. Spoken w/ mail hosting provider who says Apple Mail doesn't follow IMAP protocol properly leaving Apple Mail users to experience a variety of problems when connecting to IMAP accounts. Among them:
- Improper syncing
- Proliferation of drafts during composition of an email.
- Connections on the mail host do not close automatically and proliferate over time until the host rejects further connection requests.
Hosting provider goes on to suggest turning off IDLE command. In my experience turning this feature off did not improve the situation. In fact, it created a few.
Question: Is the hosting provider correct in faulting Apple Mail?
Been fielding the question with a number of people. I'm aware of three people who are experiencing similar problems, each using different mail hosts. Tech reps at inmotionhosting.com and nexcess.com point the finger at a Apple Mail, along with an IT specialist in Los Angeles, CA, and a tech support rep at an Apple Store in Arizona who said that Apple and Google mail are aware of and coordinating to resolve the problem.
Anyone out there have any insights into this? -
Problems with Target service agreement
Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?
Apple Customer Relations (800) 767-2775
-
When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?
Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN
Maybe you are looking for
-
I sync my bookmarks between my iPad (3rd gen) and my iPhone 5, but I don't want them to sync with my Mac's because many of the bookmarks I have on my iOS devices are websites designed for mobile devices, or at least they're not the desktop version of
-
Cross-currency clearing problem
Hi, Foreign cross-currency clearing btw USD & EUR is a business requirement for us (local currency is TRY). In order to do this right we maintain exchange rate table for cross currency rates btw USD & EUR. However in clearing transaction code (F-44),
-
Expand/Collapse a frame in Screen Painter
Hi, I have a requirement to implement the Address screen and have a problem to add an collapse icon in a Frame. I found in transaction CRMD_BUS2000126 window, where the frames are implemented. In screen painter I can only put the appropriated fields.
-
How to run jsp file in Apache Tomcat 5.0?
hi, i'm using jdk1.5,jsp1.2 & Apache Tomcat 5.0 as a web server.in my application i have 2 jsp files,1 html file & 1 javabean class.where i must place the html,jsp files and the .java file & .class file for a bean class.how to run this application. b
-
If you have an apple protection plan and upgraded do you need a new one?
I have just upgraded to the 4S and I have an apple protection plan for my 3GS. Do I need to purchase another apple protection plan?