Problems with calls and messages not showing up

just got the new iphone 4s and sometimes ill get calls or messages that wont even show up or come really late in good reception areas. i wont get a missed call, only a voicemail or a bunch of calls at once (or texts at once). Im on Verizon and i called to reset my phone's signal, only to have the problem occur again 5 min later. Does that happen alot normally or is there any way to fix it?

I have the same **** problem.
https://discussions.apple.com/thread/3698772

Similar Messages

Placed calls and messages not showing on-line

I'm the account administrator of 2 lines so I can see calls and messages that the other line makes except I can't figure out why some do not show up. Can anyone help me with this?
Example: I was present when my family member received a call/hung up when it rang so I went on-line to see who was calling. No such time nor details. So I called another family member to see if that call would show up and sure enough it did.

Was the call actually connected? The family member answered the call and then the caller hung up?

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

Since installing iOS 6, I have had problems receiving calls and messages. Calls go straight to answerphone and messages do not appear until I switch off and on again. I have also installed iOS 6.1.1

Since installing iOS 6, I have had problems receiving calls and messages. Calls go straight to answerphone and messages do not appear until I switch off and on again. I have also installed iOS 6.1.1

Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Problems with calls and Answering Machine

I have a problem with calls on my Z3 dual and the Answering Machine after the update to L.I don't have Smart Answer enabled -gesture to answer calls- but when I answer a call too close to the time set to the Answering Machine to kick in, when the call reaches this time (say 25 seconds) the call will be interrupted for about 2 to 5 seconds where I can't hear the other party and they can't hear me, and then the call will resume.If I disasble the answering machine, this bug is gone.I have cleared data of the phone app but still this issue persists.

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
Let us know if the problem persist after you've repaired the software.

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

IPhone 3GS multiple problems with calls and text

I have AT&T for service provider and I am having these problems with the THIRD Iphone 3Gs that I have received since Jan 12.
I turned off 3GS again after newest update, not sure if it willl help or not.
Also, I have the same problems with this phone as previous 2 Iphones I got at Apple Stores:
* sporadically drops calls - even if I don't move from the spot I originally called from. This is my only phone, so I need to make and receive any calls to this phone.
*"Searching", "No Service", so text messages don't get sent, but I don't know that unless I check back to see the red ! and I keep trying to resend...
* No SIM card - but, only know this if I check, not good when busy and waiting for a call or text.
Do I need to go to an Apple store again (not nearby me) to replace it before my replacement warranty runs out?
Thanks for any help!

Try powering the phone off, then removing and replacing the battery, and powering the phone back on.
Then try dialing *228 send and option 2 on the phone to update the PRL.
Then try closing down applications that you are not using on the device.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Applications.
Touch Running services.
Touch a service you are not using then.
Touch Stop.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.Touch Applications.Touch Running services.
Touch a service you are not using then.
Touch Stop.
Repeat steps as needed.

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Problem with guided navigation - Reports not showing up

Hi All,
We have a dashboard page that has a number of sections based on guided navigation. The problem is that the reports in the sections do not show up even when there are results for the guiding reports unless the page is refreshed. However, the section borders are showing up. Is there any solution for this problem?
Thanks in advance,
Radhika

Hi Radhika,
As I mentioned earlier i have created 2 reports, but your case is some thing different and you are using the same report for condition also and in the section also.
What we have done is , suppose we want a report in a section to be displayed when my *# Service requests* >20 then
We have created a report with *# Service Requests* with filter condition greater than 20. which we will to define the condition.
and another separate report we to put in the section will be created.
Just try this, not sure is this going to help you.
Regards,
Somu

Problems with iSight and Messages

Hi there, im having problems using Messages... i dont use it very frecuently but today i wanted to use a videochat and found i cant do it. I check in preferences and have this going on in the audio/video section:
if someone dont understand spanish, it says "this computer dont allow videochats" or something like that. Then i try with skype and iSight works, i try photobooth and works too. I google the problem and it read they recommend restart the smc.. i do that, restart the mac and try it again in Messages and the same problem.
Dont know what too do, so plz help.

Because other internet-connected, camera-enabled apps work on your Mac, your trouble would seem to be with the Messages software. Restart Mac, launch Messages only, and check to see if the problem is resolved. Simply restarting sometimes corrects things.
If the problem continues, follow these steps in order to try the simplest fix first.
(1) Your Messages preferences may be damaged. If you don't know how, here is how I try to repair these preferences:
• Quit Messages app. Then open your user/Library/Preferences folder and
       move the "com.apple.iChat.plist" file that is in this folder to your Desktop.
• Launch Messages app again. Your Mac will create a new Messages Preferences
       (com.apple.iChat.plist) file in your Preferences folder with default values.
• Test the camera again. If the camera works now, use the Messages > Preferences...
       menu command to restore any other Messages preferences that you want to be
       different from the default set. Then you can throw away the old plist file that you
       moved to the desktop. You are done.
(2) If the above does NOT fix the problem, I would replace the newly-generated
       plist file with the one you previously moved to the desktop. Then, use
       OS X Recovery to reinstall Mavericks. Messages will be reinstalled as part of the
       OS X Mavericks reinstallation and should now work with your camera.

Having problems with data and messaging.

I am having an issue with my net and messaging for my phone, and have been having these issues going on 3 weeks now. I still cannot receive nor send any photos or emails and the only internet or data access I can get ANYWHERE is inside my home. My mobile Data doesn't work and even if I sync to other wifi networks I cannot access the internet at all. I also bought the 3gig bridge data pack, and got the confirmation e-mail but it has not been added to my account and I bought it 2 weeks ago...
ALSO, I cannot reveive or send any picture messages anymore. Sice, number, it doesn't matter, I can't do it. It's upsetting because I would like to share the photos from a recent trip with family and friends.
This is VERY frustrating since I have only had this phone for a month.

whitewaltz, Help has arrived! We understand how important it is to make sure all of the features on your device are up and running and we'd love to take a closer look. What model phone do you have? What zip code are you experiencing this issue in? Are multiple users affected? Has this affected voice calls? How many bars of service do you have on your device when experiencing this issue? EfrainM_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

IOS 7 problems with FaceTime and messages apps.

Need resolution on why FaceTime and message apps are not accepting my password after loading ios 7.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Does anyone have a problem with the code window not showing code?

I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
I just use DW to format text that will go into Edge Animate.

Hi,
Are you getting this issue on all the files?
Please share any screenshot.
Regards,
Devendra

Problem with contract and service not matching... no help by phone or in stores

My contract says 4gb shared plan, my bill says FamilyShare1400... 15+hours in person and on the phone and lots of promises but the bottom line is I AM NOT IN THE PLAN I CONTRACTED! My bill has been more expensive, my services deleted and I was charged for what should have been included. 26 January is when this all started.... problems pulling a 'stupid phone' off my account made it impossible to put me into the 4gb shared plan (Excuse #1 - and I've heard many more in the multiple calls to VW) Every agent makes Promises Promises... Every agent ASSURES me that they have taken care of it, and it will be corrected - and that they will put notes on the account so anyone looking at it will KNOW what had happened... Today I'm told that there are NO NOTES!! I'm ready to walk away from VW - a relationship since the early 1990s means nothing to them..... How can I get my service straightened out, guaranteed? How can I get VW to take some responsibility for their inept handling of this customer? 15+hours because VW doesn't do their job is 14.5 hours too long!

UnhappyonCapeCod,
Goodness gracious! You've been through a lot, and I'm so sorry to hear of your experience. 15 hours is definitely way to long. I would like to review your account for options to see what can be done. I have already requested to follow you. Would you please send me a Direct Message following the steps here: http://vz.to/1cOOY6O
SarahO_VZW
Follow us on Twitter @VZWSupport

I have a basic applet method timing problem with Firefox (and Chrome), not IE nor Opera. Works if JavaScript issues windows.alert() prior, fails otherwise.

I have an applet method, which is invoked from a JavaScript function, that is triggered by the window.onload event. The problem seems to center in the loading of the applet and its methods.
If I step through the 3 applet acceptance prompts (I chose to use a down-level Java), the applet method is never invoked, nor is an exception raised. How this happens is beyond my understanding.
As additional information, the Init(), start(), and "desired" Java methods all use the synchronized keyword. This is an attempt to minimize the exposure to a multi-thread environment.
If I issue a message from JavaScript (via window.alert()) PRIOR to invoking the method, I can get the desired results in special circumstances:
1) When the alert is presented, Firefox also prompts, SIMULTANEOUSLY, to block/continue the applet (the first of the 3 applet acceptance prompts). I can accept that these are separate threads.
2a) If I walk through the 3 applet acceptance prompts FIRST, and then hit the OK button on the alert message SECOND, I get the desired results, my applet method executes, and all is well (other than the fact that I would prefer not to have the alert in place at all).
2b) If I hit the OK button on the alert message FIRST, and then walk through the 3 applet acceptance prompts SECOND, I get the same results as when the page loads WITHOUT the alert, which is the applet method is never invoked, nor is an exception raised. Weird, huh?
The above problem only occurs when the browser and the applet's URL are loaded for the first time.
Subsequent invocations (after the page & applet has been loaded initially) do not have the failing symptoms.
It is my understanding that IE and Firefox (and Chrome and Opera, for that matter) each use the same implementation of JavaScript provided by Microsoft. Please correct me if this information is inaccurate.
The failing page and it's applet are proprietary; I cannot provide the Internet URL, nor the Java or JavaScript source, to aid in your analysis.

I can speak to the source code, but have no access to it.
The current process/thread that invokes an applet method must check to see that the applet is not currently being loaded by another process/thread. If it is being loaded, the current process/thread should block until the load is complete, THEN attempt to invoke the applet method.
Please forward my concern to a knowledgable developer. The nature of the problem, once identified, can be addressed in a very straightforward manner.

Problems with calls and messages not showing up

Similar Messages

Maybe you are looking for