Problems with camera and photos

Hi so I just got the new iphone 5s and every time I try opening up my pictures or just using the camera, it quickly returns to the home screen. How do I fix this?

Hi alecefriedman
If you are having issues with the camera and photos on your iPhone, you may find the Camera portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Similar Messages

Problems with camera and photo booth

My camera shutter will not open, and in photo booth, the red drape repeatedly closes. I have closed the apps and also reset my iPad, but nothing works. Do I need to bring it to Apple?

Jambagroov-
I have not tried it, but found an article that explains how to sync your iPad to a new computer: <How to Sync an iPad With a New Computer - eHow.com>. I know you can lose your data if you do not do it right!
Another article is at: <How to Sync an iPhone, iPad or iPod Touch with a new computer>.
Someone else may have a better reference, perhaps from Apple.
Fred

New problem with camera and imovie 08

i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

Problems with titles and photo galleries

Hi
I would really appreciate help with two problems...
1. I have changed the title on all my pages yet the title bar
in the browser still shows untitled document!
2. I have downloaded a photo gallery from the internet and
exchanged the images for my own, works perfectly off my own
computer but as soon as I put it in as a flash file in my page and
publish, none of the images are there and it has 'undefined' on the
bottom of the gallery
Thanks for any support
MVA1983

A url always helps but here are some pointers
1) Make sure you are not using a frameset.
2) Check the links to the images in the flash file because it
sound like
the link is somehow different between your machine and the
server.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"mva1983" <[email protected]> wrote in
message
news:fc2lpr$9q4$[email protected]..
> Hi
> I would really appreciate help with two problems...
> 1. I have changed the title on all my pages yet the
title bar in the
> browser
> still shows untitled document!
> 2. I have downloaded a photo gallery from the internet
and exchanged the
> images for my own, works perfectly off my own computer
but as soon as I
> put it
> in as a flash file in my page and publish, none of the
images are there
> and it
> has 'undefined' on the bottom of the gallery
> Thanks for any support
> MVA1983
>

Problems with apps and photos since updated new iTunes

Hi all.
I updated itunes and instaleed it on both my computer and my iphone. Since then, I cannot purchase apps, update them or sync them with my mac. My id and password are ok, but the apps are stuck in mid process and I cannot use them. If that wasn't enough, the iphone shows that all my photos are gone although itune shows 11.5 gb of "other" and I can't sync photos from iphoto to iphone. ideas anyone?

Do not install MacKeeper.
Back up your Mac if you have not already done so. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
Determine if the same problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Problems with iPhoto and Photo Booth

I can't open or use iPhoto. When I click on the icon on the dock, a pop-up comes up and says I "cannot create new library" because I "do not have enough access privileges". Then when I click Photo Booth a pop-up says Photo Booth cannot save any photos. I'm having trouble opening some programs. If it's helpful, my macbook pro is a 10.6.8 version. Any help would be greatly appreciated, thanks.

Jambagroov-
I have not tried it, but found an article that explains how to sync your iPad to a new computer: <How to Sync an iPad With a New Computer - eHow.com>. I know you can lose your data if you do not do it right!
Another article is at: <How to Sync an iPhone, iPad or iPod Touch with a new computer>.
Someone else may have a better reference, perhaps from Apple.
Fred

IPhone 3Gs syncing problems with PC and photos

An executive at my company is experiencing syncing issues with his photos on his PC and iPhone 3Gs. He's gone to the Apple Store and met with a Genius Bar consultant and they've already wiped the phone "clean" and still is unable to sync his photos to his iPhone. Any suggestions or fixes are greatly appreciated. He recently upgraded his laptop to Windows 7, could that be a contributing factor? Thank you.

Unlikley it's Windows 7. Maybe delete the iPod photo cache?... http://support.apple.com/kb/TS1314

Itunes problems with syncing and photos

Why is syncing in itunes screwed up all the time...it doesn't seem dependable. I downloaded some tv shows and tried to sync it and it doesn't even let you drag it to your ipod. The only way I could manage to get the videos on there is by manually managing my music. It seems like managing manually is the only dependable way.
Second, Is there a way to get photos downloaded directly from your ipod on itunes? I noticed there is a photos tab under devices/ipod and it seems to sync it, but you can't view it on your hard drive. The only way I got my photos on my hard drive was by using my computer/ipod (which doesn't even let you drag your music to the device, what is up with that? can you only use itunes to put music on your ipod?).

Deselect Sync Photos under the Photos tab followed by selecting Apply and a sync which should remove all photos on your iPhone that were transferred from your computer.
Re-select Sync Photos under the Photos tab and the folder of photos on your computer you want transferred to your iPhone followed by a sync.
If no change, Mac or Windows PC?
If a Mac, do you use iPhoto and are you transferring photos from iPhoto or do you manually manage photo storage on your Mac?
If a Windows PC, do you manually manage photo storage on your PC?

Problem with Facetime and my MacBookPro camera

Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.

Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry

Aperture2.0 and iweb08 - problems with size of photos

Just got a new Imac and Aperture2 and I have my first problem. Hopefully I can explain this without sounding confusing. I have 10 photos in album "A" in Aperture. The photos are 'web ready' .jpg at 500 pixels by 500 pixels and 72 dpi. When i make an album page in iweb08 and use the media window to bring in my 'aperture album' the photos come into iweb much smaller then there original size, maybe 200 pixels by 200 pixels - I cant resize the images or if I can, there way distorted.
Here's the tricky part.
When I created an album in iphoto08 and placed the SAME photos in it and add it (using the media window, same step as above) into iweb - all the photos display correctly.
So.
What could be the problem with aperture and iweb?? Thanks for any help.
and I have all the lastest updates including the new Aperture2.01
Message was edited by: mezzo17

I tried that (switching the preview resolution from 1/2 to no limit) and it didn't work.
but then
I deleted the entire project folder, with the albums etc. and decided to start from scratch.
With the settings (as you guys suggested) prior to creating my folders and projects
and just created the project folder again, created a new album folder and imported the images again.
and then it worked just fine.
I guess switching the preview quality while the folders 'existed' wasn't updating somewhere.
Sounds buggy.
Anyways. Its working now.
I haven't gotten the .mac side of my new web working yet but you can check out the old site
at www.garage17.com
Thanks for the help.

Can't access photos in camera roll - camera and photo app crashes

Have iphone 4 with iOS 5.0. Took pictures but now I can't access any photo in the Camera Roll. When I now try to take a picture, Camera app crashes. If I try to access the Camera Roll via Photo App, it too crashes. Can't see the photos from iTunes either. Shows it as unknown data. Is there anyway to rebuild the photo library or remove a corrupted photo since I think that is the problem. Any help would be appreciated.

Thanks to Steve Kehlet who posted the solution that helped me and saved my day, https://discussions.apple.com/message/16405821#16405821
Follow the link:
http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
You will need to download PhoneView, but the free 7 day demo does the job - and my camera and photo app are up and running again!

IPhone 4 camera and photo application not working!!

My iphone 4 camera and photo applications do not work anymore. When I tried to take a picture, the camera froze. I turned off my phone and when i turned it back on, the app will load, but when i tap to take the picture it returns to the home screen. The picture library application does the same thing. I try to load my picture library and when I tap to open it, it returns to the home screen.
I have tried turning it off and on multiple times and also turned it off for an extended period of time and it still doesn't work. Any suggestions on what the problem could be or possible ways to fix this would be greatly appreciated.

Tap Settings App>General>Reset, near bottom of list>Reset All Settings. If this does not help you could try a Restore with iTunes, and when asked at end Set Up as New. If this does not help and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

Camera and Photos app keeps crashing!!!

I had no problems last week until yesterday...i even did a clean restore but still the camera and photos app tend to crash
it keeps stating "Please Wait" Updating Library...
and the bar reaches up to about 30% loading and then crashes....anybody else having these problems on their 3gs?

This means the answer is no - a clean restore does not mean you restored your iPhone with iTunes as a new iPhone or not from your iPhone's backup. If there is a problem with your iPhone's backup, restoring from the backup will also restore the problem.
All photos and/or video in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera. Not a good idea to depend on your iPhone and your iPhone's backup alone for this data in the event your iPhone is lost or stolen and it is not replaced with another iPhone, or there is a hardware problem with your iPhone.
I always import all photos and videos captured by my iPhone with my computer ASAP as with any other digital camera and as with any other digital camera, I delete the photos and videos from the camera after the import process is complete. This also helps to keep the iPhone's backup time to a minimum, provides me a copy of this data on my computer for viewing along with including this data with my computer's backup along with all other important data, and if I want any of the imported photos and videos available on my iPhone for viewing, I can transfer the photos and videos from my computer to my iPhone via the iTunes sync process as with any other photos/video.
Try importing the photos/videos from your iPhone's Camera Roll followed by deleting the photos/videos from the Camera Roll after the import process is complete. If no change after doing so, restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

Problems with camera and photos

Similar Messages

Maybe you are looking for