Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open.  Does anyone know of a solution or work-around for this problem? 

thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

Similar Messages

  • PSE 10 from Apple Store problem with camera raw 6.7 upgrade

    PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

    Thanks for your help. It works !!!
    Bartek A
    Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
    Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
    created by Barbara B. in Photoshop Elements - View the full discussion
    You will have to do the update manually for the app store version. Instructions are here:
    http://forums.adobe.com/message/4106477
    (that's for 6.6 but the steps/file paths are the same for 6.7)
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • Problem with WCS Audit status missmatch after upgrade

    We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3  WLC : 6.0.188.0.
    how I can fix the problem?

    Hi,
    Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
    Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
    Regards
    Surendra

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Problems with result area in workbooks after upgrade to BW 3.5

    Hi,
    we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
    Has anybody had similar problems and has found a solution for this?
    Thanks,
    EMS

    Hi,
    I am having that message, always if I delete a Sheet which contains an embeded query.
    Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
    To find out if this is your case as well,
    select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
    Regards
    Vasso
    Message was edited by: VASSILIKI SIAGRI

  • Problem with Camera Raw update in Elements 11

    I need to update the raw plug-in in elements 11, but when I go to the update section, I just keep getting an error message (which says server busy or might be prevented by firewall).  I suspect that my firewall is stopping the updates, but I don't know how to over-ride this.  Can anyone explain it please?  (I have managed to 'allow' certain things on the firewall, but for this update, I don't know what I'm looking for to 'allow'!

    I know nothing about Photoshop Elements. But, according to this list, Photoshop Elements can only work with Camera Raw through version 8.0.
    Camera Raw-compatible Adobe applications

  • Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

    After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
    on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
    then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
    Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
    hope someone can help me out.
    I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
    thnx in advance for the help

    I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
    I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
    I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
    Any help would be appreciated.

  • Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

    Hi,
    We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
    Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
    Regards,
    Joonas

    Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

  • Problem in Camera Raw 9.0 after Photoshop CC 2014 update

    Hi, after I install the new update to Phostoshop CC 2014, I can't see the picture when I open a RAW file in Camera Raw 9.0. It only shows a big blue box. Can someone please help me?

    Quick fix I found on another thread by fredforward until Adobe can fix the problem. Disable Graphic Processor for Camera Raw worked!
    Go to "Edit" menu, "Preferences", "Camera Raw"
    Disable "Use Graphic Processor" under "Performance" at the bottom.

  • Problem with Camera Raw

    I am using Photoshop CS6 v 13.0.1 x64. I have been using Photoshop for years, of course various versions. All updates have been installed. My OS is Windows 7 Pro X64 with all applicable updates. I just downloaded NEF files from my D2X and was opening them in Camera Raw. I then selected similar NEFs and clicked Synchronmize but nothing happened. No error message, nothing! This never happened before. I have 24 G RAM, plenty of free space on the C drive (334Gs). I.have the OnOne plug in installed and may have added some free presets lately.
    I used to download pix from my cameras and never encountered this problem before.
    No changes were made to the system that I am aware of.
    What is going on? How do I fix this?

    PSE version?

  • Problem with PO text in ME22 after upgrade

    Hi,
    I face an issue in Purchase Order Text. We have recently done the upgrade from SAP 4.6 C to SAP ECC 6.0. Before upgrade, the users were entering required texts in ME22 transaction for each item and select the check button available. All the text types ticked here are carried forward and printed on the Delivery output.
    After upgrade, this tick is removed from all the existing documents and also for the new POu2019s users select this button and save it. But, when they come back and see it in change mode ME22, the tick is not available. Because of this issue, these texts are not printed in delivery outputs now.
    I have checked this problem in SAP. No relevant notes are available. Has anyone faced this issue before? Can you please throw some light on the same?
    Thanks and Regards
    Vijayakrishna

    Hi
    Please, see these notes
    Note 751441 - Consulting: Settings for texts from purchase order
    Note 53593 - Q&A - Delivery text from stock transfer order
    Note 417883 - Texts from purchase order
    and related notes. They talk about how to copy text from PO to delivery (for instance, in SC, STO and so on). It's related with some customizing steps in VOTXN and some VOFM subroutines that perhaps they are lost after the upgrade.
    I hope this help you
    Regards
    Eduardo
    Edited by: E_Hinojosa on Aug 24, 2011 10:22 AM

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • Problem with camera raw for Sony 350K and PSE 6

    I have recently tried to download my first batch of RAW pictures taken with a Sony A350K camera into PSE6 but I am told the format is not recognised.  I thought I had  successfully down loaded ACR 4.6 but apparently not as they are still not recognised.  Can anyone throw any light on what I might be doing wrong?

    If you have left the old version of Camera Raw.8bi in the folder, even if you have renamed it, Photoshop will still use it.
    Follow this link:-
    http://kb2.adobe.com/cps/402/kb402444.html
    and scroll down to the section on installing the plugin in PSE 6.

  • Problem with Camera Raw update

    Downloaded Camera Raw 6.2 update.  When attempting to install it I get a message saying I need a new copy of Adobe Application Manager. I can't find such a download anywhere on the site. A search turns up nothing called "Application Manager". Is anyone else experiencing this problem?

    Adobe Application Manager appears to be how Adobe checks serial number and manages free trial periods.  If you go to your boot drive and open Library > Application Support > Adobe > OOBE > PDApp > core you should find Adobe Application Manager.  If you have moved files, deleted files or whatever things might not be where they should.  I'd probably reinstall PS CS5 which should reinstall Application Manager if it's not there.

Maybe you are looking for