Problems with Canon XA 10 XLR Recording level

when I record using the XLR Channel 1 on my XA10, then import the video clip into video editing programs, the playback level is very low or not there at all when I play the DVD on my home intertainment system, using my Pioneer AV Receiver.  Is there another setting on the XA10 where the playback level can be adjusted?

Volume sounds okay with headphones, but very low without headphones, even with the slider all the way up.  One thing which is likely a factor is that I had to turn on Mic Attenuation when using XLR recording, due to sound distortion in higher DB ranges.  A third factor is that the extremely low audio level is most pronounced when I play the video back using my Pioneer VSX-520 AV Tuner amp (using HDMI cable from DVD player to tuner).  The sound track from the XA10 XLR input is too low on all listening modes except "advance surround".  If I bypass the tuner, there is no problem, but I prefer not to have to do that, since all other DVD audio, such as movie DVDs, and CD tracks added to videos, have normal audio volume.

Similar Messages

  • I have a problem with Canon PowerShot SX 60 Hs-camera with Camera Raw, I cannot open the pictures taken in raw mode. How can I update Camera Raw? I also tried with Photoshop Elements 13, but it was the same, I could not open raw pictures.ts 13

    I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop Elements 12, cannot open raw files. I have the newest version of camera Raw plug in, whats is the problem?

    It is on our radar and hoping to add it in an upcoming update.
    As soon as it is available, it will be update in the below article.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    ~ Arpit

  • Problem with Canon LPB 6670,

    Hello, I have problem with Canon LPB 6670, while printing both sides the paper is jammed every time

    First clarify this statement...
    I captured video, and when I went on FCP and did log and capture, it said the camcorder was offline.<</div>
    Have you already captured with this camera or are you trying to capture with it now?
    If you're trying to capture with it now, are you capturing to an external harddrive? If so, the problem may be because you're overtaxing your FW bus.
    If you're not already, you might try capturing to your internal (so the iMac is only accessing the camera on the single FW bus), then transfer the media to an external to edit.
    Does the iMac recognize the camera? (check in System Profiler)
    Is the camera in playback mode?
    Have you tried shutting down and making sure your camera is on before opening FCP?

  • Problem with showing a group of records in dynamic page (PLS-00428  error)

    Hi
    I have problems with viewing a group of records from db. I've created Page, which "Page Type" attribute is "PL/SQL". In "PL/SQL Code" field, I've written very simple SQL query: "SELECT * FROM PORTAL_DEMO.EMP ;"
    I'd like to generate HTML table with it's result. Unfortunately, every time I get the same Exception:
    Error 30584: DBMS_SQL has raised an unhandled exception. ORA-06550: line 1, column 7: PLS-00428: an INTO clause is expected in this SELECT statement
    Is it necessary to write a COURSOR (and use HTP function) to realize this functionality? I succeed, trying this way - but it is very uncomfortable ( a lot of code ).
    What I have done in wrong way?
    Please help me.
    Best regards
    Mario

    How do I handle this?

  • Problem with Canon RAW 5D/7D Raw file and Magenta highlights

    Hi everyone,
    I've noticed a problem with some Canon RAW nightly shots when in scene are present magenta spotlights (also red and blue):
    In the core of light, magenta color become "solarized" and white burned, and there is no way to recover it with any Adjustments. (also but in minor way, Red and Blue lights)
    Opening the RAW file in Canon Digital Photo Pro the same images are perfect:
    (left image Aperture3 - right image Canon DPP)
    Any suggestion?

    I have exactly the same problem with the 7D RAW files. I have tried Leopard+ Aperture 2, Snow Leopard + Aperture 3 trial and nothing makes a difference. Horrible magenta colour cast on the neutral tones, yet the blues are over-saturated and total lack of sharpness no matter what you do.
    I shot JPEG (neutral) and RAW together so know what they should look like. I don't get any problems with Canon DPP software so the error seems to be in the Aperture RAW converter. The issue seems to be more apparent in low light or images with a lot of neutral tones, other images shot outside in good light appear to be pretty much ok. I even tried the latest version of Lightroom and that can't seem to handle them well either.
    The link below was a thread that was running on the 7D problems, but no solution was ever provided.
    http://discussions.apple.com/thread.jspa?threadID=2267875&start=0&tstart=0

  • Having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    Hi jaleesf,
    this video helped me. Printer/Scanner Fix With Yosemite No Matter What Brand
    -crazy

  • Printing problems with Canon Pixma IP4700

    I used to use a PC, photoshop and my Canon pixma IP4700. With this i could achieve perfect results on an A4 image. I have embedded the correct paper profile and my colour management system was set up just right. I have now upgraded to a mac(running Snow Leopard OS) , but i am now getting problems with my prints. I opened up the exact same .psd file without changing anything and sent it off to print on my canon. The result has came out far too bright?. When i used my PC I would have a lot more controls within my printer driver screen, but now with the mac the printer driver screen dosnt have very many controls at all. Even when i soft proof the print on the print screen it dose not show it any ware near as bright as the end result print.
    I am a student of photography and i have asked a few of my class mates and they say that they have had the same problem. They tend to use a professional printers, but as i had received such perfect prints before I know this result is obtainable.
    Is there anything anyone can suggest to help??
    If there is any more information i can provide to help just let me know.
    Thanks a lot in advance

    Hi there,
    In reading your post I'd be curious to see the cups error log. Given that the Gutenprint drivers would not print also, I would say that something is wrong with the core printing system. The log would show which filter is causing the spooler to stop.
    Thinking that it is CUPS related, I would try resetting printing system (if you haven't done so already). Then I would add the queue again using the Gutenprint driver for starters. If this doesn't work then no need to try the Canon driver.
    Note that the Canon test print is not an actual print but an instruction to output the inbuilt data. But the test print via the Gutenprint printer queue is a page generated by CUPS. So this would suggest that the CUPS usb backend is okay and something further up the spool creation process is failing. Again, the cups error log would give some clues as to what is going wrong. As to why both driver sets are failing is interesting...
    PaHu

  • Printing problem with Canon LBP3370

    I'm having an issue relating to the Canon LBP3370.
    I also notice that Canon Europe seem to have removed all trace of any MacOSX drivers from the support page for this printer.
    I have an 'early' MBP running 10.6.6 w/ Suitcase3, QXP8.5 and CS5.
    Just bought a MacMini updated to 10.6.7. Same software. Same files. Same fonts.
    I have one file which gets printed weekly from a template in QXP. It prints fine on the MBP on a Canon LBP3370 using the last 'auto updated' driver. Not sure how to check the version number of the driver, but it works. I looked in 'About this Mac' and looked up the printer, and it says driver version is 2.0 - then again, it says the same for the version on the MacMini, which was installed today using an installer marked 2.24.
    On the MacMini, the same file, on the same software yields an output error to the printer and requests the printer be switched to 'raster' mode in 'Quality' settings in order to print, which I understand yields diminished quality on more complex files.
    I experimented with the file, removing elements and isolating them in another document to test if they print OK on the MacMini. 99% of all the page elements print just fine including a complex EPS without switching to 'raster' mode. All except for... wait for it... a SINGLE weight of the Adobe Helvetica Neue LT Std OpenType font. The document has about seven separate weights of the same font in use, and it is only one of them that triggers this problem.
    I've scanned the font completely for errors and corruption and it gets a clean bill of health. The exact same font, on the MBP, using the same software and the same printer, but used on 10.6.6 prints perfectly without having to switch to raster mode.
    Bizarre.
    What actually is the difference between UFR and Raster modes anyway? How do I fix this? It seems more likely to be a 10.6.7 issue than a Canon driver issue specifically... I notice the webs full of people commenting on 10.6.7 causing problems with OpenType fonts.
    Any ideas?

    sig
    Not really, thanks anyway. I'm already on a later driver than that.
    PAHU
    Thanks for the input. I'm still somewhat confused by the aparrent existence of two different problems - first the sheer number of complaints that 10.6.7 in itself has broken a good deal of OpenType font functionality, particularly in the PostScript flavour, and second that users have been having similar specific problems with this exact printer which appears to be a result of a driver in need of fixing.
    I'm not sure which option to place my bet on, or whether indeed the two are, in fact, connected and the development of the 2.24 and later drivers are in essence 'fixes' for the 'breakage' introduced by 10.6.7 in general.
    The part that confuses me most is that it is a single weight out of five weights of the same font used in the same document which causes the problem. Part of me says that the solution is to just abandon that specific weight, but then another part of me says that I'm managing some three thousand faces on this system, any of which could need to be used, and I cannot test all of them to disable or deactivate the weights (or families) which might cause issues.
    Can you point me in the direction of a clean, pure source of 2.24 for UK English, which I cannot find on the Canon Europe website at all (certainly on the UK site, all Mac drivers for this model appear to have been discontinued and removed from the site, even though the vestigial tech notes for the printer still on display on the product page state that MacOSX is supported). I'm prepared to try a reinstall from a fresh source to see if it shifts the problem. Otherwise, as you say, it would appear that another 'bug' has been found which the attempted fix has not cleared.

  • Problems with Canon Pixma iP4300

    I just purchased a new Canon Pixma iP4300 printer and can't find it in Printer Setup Utility to add as a new printer.
    When I connect it directly to my MacBook Pro (Core Duo) it is invisible. I have downloaded the latest drivers available from Canon. Given the point below I am fairly certain it is not a problem with my USB cable either because the printer is recognised when I plug my USB printer cable into the Airport Express.
    Confusingly, I can connect to it through my Airport Express base-station using Bonjour. A problem with this connection is that it does not allow me to use the utilities - so, for example, I can't align the print heads - or use any of the other software that came with the printer because it doesn't recognise the printer over the wireless network.
    Does anyone have any suggestions?

    And as soon as I posted this I found a spare USB cable and tried that... and it worked.
    I guess the USB cable connects properly with the Airport Express and not with my MacBook Pro. Curious. Very curious.

  • Photoshop CS 4 Print problem with Canon copiers via IP

    Try to print from Photoshop CS 4 to two Canon color copiers and we get this error message, "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer"
    Fifteen Macs:
    Mac Pro towers, MacBook Pro, PowerMac G5 towers, iMac Intel, PowerBook G4. Many of each.
    Mac OS 10.5.7 or .8  and one Mac with 10.4.11 just to eliminate the 10.5 question.
    Canon Color Copier iPR Server, Canon Color Copier iR C3220, HP LaserJet 5000, HP LaserJet Color 5550 and ColorBurst RIP to an Epson Stylus Pro 9800.
    Adobe CS3 Design Standard & Premium, Office 2004, Safari, Firefox Entourage and Filemaker Pro 9.
    All the above Macs and applications can print to all printers with no issues.
    Installed Adobe CS4 Standard & Premium on the Mac Pro towers, MacBook Pro, PowerMac G5 towers.
    Photoshop CS4 will not print to the two Canon copiers. It will print to the other printers. Photoshop CS3 on these same Macs WILL print to the Canon copiers. All the other apps will print to the Canon copiers.
    Adobe has a tech note on this, ID KB409119 did not help.
    Deleted all prefs, created new users, deleted and reinstalled Adobe CS4, deleted all printers, downloaded latest drivers and installed printers fresh.
    None of this worked. Not to mention this problem is different from that tech note because Photoshop CS 4 will print just fine to the other HP printers.
    Tried setting up the one Canon Color Copier iPR Server using Appletalk. That worked.
    Why is there a problem with Photoshop CS4 and Canon IP printers?
    Just to recap for you all that just skim thru this:
    All Macs did this at once. So no fluke corrupt file, plus all the other apps print just fine to these printers. Adobe has problems with CS4.

    Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
    Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
    PaHu

  • Problem with Canon iPF8300

    Hi everyone, I've got a problem with my Canon iPF8300 and Photoshop CC.
    I've installed  the latest drivers (3.01), last OS (10.8.5) and last Photoshop (14.1.1).
    I cannot print on a A3+ sized paper, the printers print only a piece of the image, like it was set a bigger paper size, but I double checked that.
    I had to play with the AppColorMatchingInfo.xml and add Photoshop CC to the list of apps, becuase before that I couldn't even print at all. The print received the command but all the jobs went on the job queue but didn't print.
    With Canon Plugin I can print without any problem, but the plugin misses the Adobe CMM...
    Any workaround?
    Thanks

    First clarify this statement...
    I captured video, and when I went on FCP and did log and capture, it said the camcorder was offline.<</div>
    Have you already captured with this camera or are you trying to capture with it now?
    If you're trying to capture with it now, are you capturing to an external harddrive? If so, the problem may be because you're overtaxing your FW bus.
    If you're not already, you might try capturing to your internal (so the iMac is only accessing the camera on the single FW bus), then transfer the media to an external to edit.
    Does the iMac recognize the camera? (check in System Profiler)
    Is the camera in playback mode?
    Have you tried shutting down and making sure your camera is on before opening FCP?

  • Raw file rendering problems with Canon EOS 5D in Aperture 3

    Since upgrading to Aperture 3, I have had serious problems with the rendering of Canon EOS 5D (not Mark II/III) RAW files. With Aperture 2, both the preview and full-sized images looked basically the same as the original images as displayed on the camera's display, without any adjustments.
    With Aperture 3, each preview images initially look fine after import, but when Aperture re-renders it from the RAW file (e.g. when displaying the full-size image), the colors are drastically intensified, and the hue is shifted generally towards green/blue. I've checked the RAW Fine Tuning, and it is set to the defaults. If I turn the default RAW Fine Tuning settings all the way down, the image is still not at all like the preview from the camera - it becomes much darker and stays too blue/green, with washed-out colors.
    A friend with a Canon EOS 5D MkII also recently upgraded her Mac from Aperture 2 to 3, and hasn't experienced any problems. We've tried importing RAW files from my (non-MkII) camera to her Mac (with the default RAW Fine Tuning settings), and get the same results as with my own Mac (i.e. strange colors), so the problem seems to be related to the camera model.
    I've also noticed that scanned greyscale tiff images (including images that were originally imported under Aperture 2) are changed when first displayed by Aperture 3 - they become darker and more contrasty, with lots of information lost in the shadow areas.
    I've also tried removing Aperture preferences, Aperture itself, and re-installing from download, with no change in the problem. (Aperture is the current latest version, 3.3.2.)
    Has anyone experienced similar problems?

    I'm having the same problem.
    iMac running Mac OS X Lion 10.7.4 and Aperture 3.3.2.  Workflow is importing through Canon's DPP and then using referenced images in Aperture.  The images look great in LR4, or Canon's DPP but are flat and dingy in Aperture.
    There's a free preset that goes part way to fixing it at http://theapertureblog.com/2011/02/10/my-aperture-workflow-for-working-with-cano n-5d-mark-ii-files/
    but as good as this fix is, it doesn't quite do the trick. [not being a hater, and not saying I can do better]
    I just got back from shoooting 1,500 images with a 5DMii and a T2i using Canon 24-105L IS, 70-200 2.8L, 50 1.8 and a Sigma 120-400 and the T2i images are not just better, they're in a different league.
    I've tried shooting in Faithful, Neutral and also toggling these presets in different ways and still can't get Aperture to match what I see on the camera's screen or in other Apps.  I love the interface and DB of Aperture, but what's the point of using it if it doesn't produce and awesome image in the end?

  • RAW Processing problems with Canon 5D Mark iii

    I am having problems with the RAW files coming from my new 5D Mark iii in Aperture. I have the latest version of Aperture (and update) installed. Selecting a picture style on the 5D doesn't seem to yield any results because when I import the photo into aperture all the images go very dark. I have to pull the exposure levels up all the way to get a decent exposure. The histogram on my camera looks perfect but when imported into Aperutre the histogram changes. I have my custom picture style set to give me a very flat image (contrast off, sharpening off, saturation -2, color tone 0). The images looks very flat and perfect in my LCD but once imported into aperture the RAW processing makes it very dark. I even tried shooting the exact photo in three completely different picture styles but they all look identical once they are in aperture. What's going on??

    Here is a side by side comparison of a RAW image in the latest versions of Aperture and Lightroom. I have never had these issues with the 5D Mark II only the Mark III. As you can see Lightroom produces a nice flat image while Aperture is under-exposing the image. Any thoughts? I really want to continue to use Aperture but with my recent camera upgrade to the Mark III I don't see how this is possible. Anyones help would be much appreciated.

  • Problem with Canon G12 RAW file

    I'm very disappointed because I can't use Lightroom with my new camera! I have this issue since LR 3.3. and CR 6.3 started to support Canon G12's raw file. Any raw file is decoded incorrectly, picture is grained, it has a lot of noise at any ISO (even 80 or 100). The defect is noticeable only at 100% zoom, not at 50% or other sizes.
    I tried to do also a clean installation of LR 3.4.1 and CR 6.4.1 but the problem persists. (I use LR 64 bit on Windows 7 64 bit; with PS 12.1 64 bit I have the same problem)
    Yes, the camera is ok, and with Canon Digital Photo Professional 3.10 all is perfect, the same picture is amazing.
    Is there any solution please?
    Thank you!
    Davide

    It may be that DPP knows how much default noise reduction to apply to your G12's raw images and Lightroom doesn't.
    Can you adjust LR's noise reduction sliders to get a better image? If so, you could make that amount of reduction a default.
    If that doesn't work for you, could you post a sample raw image somewhere that we could bring it into Lightroom and see what you are writing about?
    Hal

  • Problems with CANON 40d

    Hi.
    I have reed the topics related with CANON cameras but none resolved my problem.
    I'm quite new to mac world but I recently purchased a MacBook Pro 2.66 that came pre-instaled with snow leopard. What was my surprise when a plugged my CANON 40D to it with USB cable! The computer doesn't recognize the camera! The camera keeps flashing the "Busy" message and nothing else works. Strange, I'm quite new to MACs but my wife have a MacBook Air with Leopard and everything works OK. What's wrong then? Anyone has or had the same problem?
    I see i'll have to purchase a CF card reader, since I don't have any I have to "BOOTCAM" in order to take my photos off the camera...
    What a shame!
    Thanks for an answer!
    Luis

    Yep, me too.
    can't import raw pics on aperture 2.1.4, iphoto 09, image capture app, or adobe bridge.
    Thanks Apple.

Maybe you are looking for