Problems with catalog etc in Lightroom 5

I`ve got a pc with Windows 7 and Lightroom 5.
Earlier today I imported a few houndred photos into Lightroom and it was successful.
Then I had to go to the store and i closed Lightroom and turned off the computer.
When I started  it again now and sat down to work on my photos I was almost shocked!
Thousands of imports is gone! Everything I`ve imported, tagged, edited etc since March seems to be gone!
What I noticed is that a startwindow from Lightroom asking me to select country - flickered just a second or two before Lightroom launched.
My identity plate setup and personal selected fonts is also gone.
User templates in the Print module is "up to date" - so no wrong there.
When I look for the catalog manually I found it with todays date but with a lot of missing data it seems....
The number shown in "All Photographs" in the Library module seems to be correct.
Can anyone please help me out?
Im almost starting to panicking now. If I`ve lost all the work I`ve done since March I am in biiiiiiig trouble.....

If you are testing this published content from a folder on your hard drive or a network LAN, then the reason the link is not working will be that you have not set up the publish folder as a trusted location in Flash Global Security.
This page explains the issue and shows what to do:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security

Similar Messages

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • I have enrolled for the apple developer program but apparently have the same account name in iBooks. I need to change the iBooks account but don't know how. Do I change my apple id? Will this cause me problems with iTunes etc etc?

    I have enrolled for the apple developer program but apparently already have an account with iBooks, cant have this it seems.how do I change my iBooks account, is this the apple id for my iPad and if I change this will it cause problems accessing iTunes etc?

    I guess nobody knows if the crash that occured was legitimate or not?  Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.

  • Problems with streaming etc

    when i try to stream some videos i get the error message not enough bandwidth check internet settings.and also the flash player and real player needs up grading is this possible and how. im on t moblie in the barnsley area so this is t moblies excuse hope someone can help cheers rob

    Can you stream with m.youtube.com?
    I seldom have any problems with that.
    Also have you tried tinytube?, it works.
    For some of the Video Centre feeds you need good 3G (HSDPA) speeds to get the streams.
    Cheers!
    PS: I don't think you can update Realplayer or the Flash Player other that hoping that a new firmware will have some updates.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • On a Mac, Just upgraded from Lightroom 4, to 5. Problems with Catalog transfer.

    So I did the upgrade version of Lightroom 5 from 4.  I did the catalog transfer to move all of my images over from lightroom 4 to 5.  But now when I click on any of my old images (from a lightroom 4 catalog) in lightroom 5, I get an error message that says Lighroom has a problem reading the images.  Last night I tried to export from lightroom 5 to my desktop and it did not work with the same error message coming up.  Help!!!  What am I (did I) doing wrong?

    -Once I put the disc in I followed the procedures to upload LR5.  This was successful.  The first time I opened LR5 I was prompted to transfer my old LR4 catalogs to LR5 which I did. 
    -Now when I click on any image, once I click away, in the lower scroll bar of images an exclamation mark in a small circle.  When you click on the exclamation mark this message appears "Lightroom has encountered problems reading this photo.  You will not be able to make adjustments to the photo."  This happens to every image I click on. 

  • Problem With Nik Plugins and Lightroom 4.3

    I bought a Drobo Mini and moved my photos and my Lightroom Catalog onto it.  The reason I did this was because I just bought a MacBook Pro laptop to supplement my Mac Pro Desktop and I wanted to be able to use both computers with the Drobo Mini and not have to constantly be importing Catalogs back and forth.  This was a solution that Tim Grey recommended.  The advantage is I can take the Drobo Mini with me on the road and add my new photos directly to the Catalog when I'm traveling, and then when I get home, I can just hook up the Drobo Mini to the Mac Pro Desktop and continue with my work.  The problem I've encountered is with my Nik plugins Color Efex Pro 4 and Silver Efex Pro 2.  On the new computer everything works fine.  On the desktop computer I can't go directly from Lightroom into Color Efex Pro 4 or Silver Efex Pro 2 for the new photos initially downloaded from the new computer.  For all my photos downloaded through the old computer, both computers work fine.  Only the new computer works with the Nik Filters for the new photos.  Also, if I go over to Photoshop from Lightroom, the new photos won't let me just hit "Save" and exit Photoshop.  Instead, I have to designate a location for the "Save" as if I was doing a "Save As" and then it doesn't show up in Lightroom unless I import it again.  I'm trying to get some answers from Nik but I thought maybe someone on this forum might know what is causing this problem??  Any help greatly appreciated.
    SaratogaLefty

    Nik developers don't participate in this forum -- it's mainly for developers to discuss technical issues of using the Lightroom Software Developer Kit.  You might have better luck reposting in the main LR forum:
    http://forums.adobe.com/community/lightroom

  • Problem with Exporting/Stacking in Lightroom 5.2

    I have used stacks in Lightroom for a long time but I am now having a problem. My typical workflow is to process RAW images in the Develop Module then Export them as JPG files. I choose "export to same folder as original" and I check "add to this catalogue" and "add to stack above original". Until recently this has worked well - the RAW and JPG files appeared as a stack in the catalogue. Now, when I go back to Library I do not see the JPG files in the catalogue and there are no stacks being created. (I can see that the JPG files are appearing in the same folder as the original RAW files as I intend them to do.)
    An additional observation is that stacks that were previouly created are not behaving normally. When I split a stack, the stack status is compleley lost - the number in the upper left corners are gone.
    How can I fix these problems?

    If you're a beginner this might be helpful.
    Capture Sharpening
    Make sure you are using LR's 1:1 Zoom view when adjusting Sharpening and Noise Reduction. A Sharpening Amount in the range of 25 to 50 with the default 1.0 Radius and 25 Detail works well with most "normal" images. Adobe increased the Sharpening Amount from 100 to 150 to provide additional sharpening when using high Mask settings. You shouldn't need to set the Amount higher than 100 when Masking = 0. Even with Masking I've never required Sharpening Amount higher than about 75.
    Noise Reduction
    If you have visible noise in the image after sharpening, increase the Luminance NR from the 0 default. If color noise is visible increase Color NR as well. You may then need to go back and increase Sharpening slightly–It's a trade-off of low-noise vs sharpness. This procedure is normally only required with images shot at high ISO settings. Images shot at ISO 100-400  should have minimal visible noise at 1:1 view and require very little more than the default LR settings.
    Output Sharpening & Resizing
    With today's high-megapixel cameras full-size Exports are not required for most purposes and simply create larger file sizes. When resizing images during Export it is important to add 'Output Sharpening' to match the target usage (prints or screen viewing). This has much more effect on the resized file's image sharpness than LR 'Capture Sharpening' used alone. If you do Export images full-size for use in other applications Output Sharpening is normally not required.
    Cheers,
    Todd

  • Problems with dual screen in Lightroom 4

    I am getting very poor performance when using a secondary screen in Lightroom 4. I am using Lightroom 4 on a PC with  with Windows 7 64-bit on an Intel i7 860 @ 2.80 Ghz, 8 Mb RAM. Graphics card is a nVidia GE Force GTX 260 with updated drivers. Monitors are Samsung SyncMaster 226 and Asus ProArt 22". When in Develop module, the main screen, either on the Samsung or the Asus, goes randomly on and out. Sliders are quite sluggish, also, next to useless. Lightroom 3 works fine with the same catalog. Anybody knows a fix or a workaround?

    I'm seeing the same behaviour here with a dual-Xeon E5620 with 24GB of RAM and a decent video card running Win7 Pro x64. It's insanely annoying.
    This shouldn't be happening (it definitely wasn't happening with any of the other versions of LR I've owned), and renders LR4 completely unusable in that mode. It works again if I disable the second monitor, but that kind of defeats the purpose of having bought two identical monitors for photo editing...
    FWIW, I see lots of "Bezel" and "Shadow" items appearing and disappearing very quickly in the taskbar at the bottom of the screen, and regions of the display turn completely black for a few seconds, usually the top half of the photo being edited. The controls are unusable during that time and the entire application feels like it's frozen for a good 5-10 seconds before it unfreezes. Then the whole process repeats itself within a few seconds.

  • Problems with impromptu slideshow in lightroom 5, functions such as flagging, rating not applying to all selected images?

    I'm using windows lightroom 5 and have just started to learn the programme.  I am using adobe photoshop lightroom 5 classroom in a book which is an official training workbook from Adobe so you'd think the instructions would work for the lessons but they don't. Is anyone else having problems getting ratings, flagging, colour labels to apply to selected images. Also the esc button doesn't take me back to the main working screen. Any ideas?
    Thanks

    Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

  • Problem with image resizing. Lightroom 5.7.

    Hi, i've got Lightroom 5.7 and have the following problem. When i export photos in the jpg format with custom image sizing 4600 x 3000, it produces 4500 x 3000. How can I fix it? Thank you.

    hi, dj_paige!
    i tried and it worked. but then i created a new collection with different photos and also wanted to crop them 23x15. but when i chosed from the list of custom crops, first it was no available, so then i created again the same custom crop 23x15 and lightroom didn't create it, instead it chooses 6.5x10. it looks like that lightroom switches to the previous custom crop instead of using a new one. how can i fix it?
    thank you,
    anna

  • Problems with Catalog Restore

    Using Photoshop Elements 6
    Am trying to restore on a new computer from a computer that died.
    I had a backup.  The files were originally on a drive H: on the old computer.
    When the old drive was placed in the new computer, it was recognized as E:
    Did the restore to a new directory on C:, keeping the original folder structure.
    Everything looks fine.  There are now files on the C: drive in the directory I specified.
    Except Organizer shows E: as the drive in the file properties.
    If you disconnect the E: drive, Organizer thinks the files are detacted and only has the thumbnails
    At that point Organizer shows the "H:" drive in the file properties.
    I'm not understanding why the restore would put the files on C: but still use E: as the source.
    I tried the reconnect, but Organizer says that there are no files to reconnect.
    All this is making me totally rethink if I want to trust a catalog system to manage files.
    This is fine if it works, and up to now it's worked really well.
    I'm hoping this is something simple I'm overlooking or that there is a simple fix.
    Thanks in advance for you help.
    - Craig

    The output is below.
    I did the reconnect all, and apparently it did reconnect some of the files this time when the E: drive was disconnected, but many are not.  There was a dialog box that listed them, and some show the question mark in the organizer.  Is there any way to reconnect these hundreds (or thousands) of files that aren't connected.  I don't understand why it would find some but not the others.
    I appreciate the help.
    - Craig
    psedbtool version 1.06
    Opening catalog C:\Users\Craig & Chantelle\Pictures\Restored Catalog 2\catalog.psedb
    Photoshop Elements version:      6
    Total files               :  15187
    Total files missing       :      0
    Total files offline       :      0
    ****** Volumes with warnings: 2
    PSE Volume Table
    Path used by PSE     : F:
    Status               : online
    Total files          : 0
    Total files missing  : 0
    Description          : DRV4_VOL1
    Serial               : BCDA-8FA9
    Drive_path_if_builtin: C:
    Type                 : builtin_drive
    Id                   : 1564
    ***** WARNING *****  : Wrong drive letter in catalog
    Path used by PSE     : E:
    Status               : online
    Total files          : 15187
    Total files missing  : 0
    Description          : H:
    Serial               : 8418-D2CB
    Drive_path_if_builtin: H:
    Type                 : builtin_drive
    Id                   : 115766
    ***** WARNING *****  : Wrong drive letter in catalog
    Windows Drives
    Drive  Type             Serial     Path
    C:     builtin_drive    D45D-E2BA 
    D:     readonly_drive   0000-0000 
    E:     builtin_drive    8418-D2CB 
    F:     builtin_drive    BCDA-8FA9 
    G:     removable_drive  0000-0000 
    H:     removable_drive  0000-0000 
    I:     removable_drive  0000-0000 
    J:     removable_drive  0000-0000 
    Z:     network_drive    0000-0000  \\HP0017a453a6d2\memory_card\

  • Homepage via iWeb problems with google etc.

    I created a homepage with iWeb uploaded it to my university's server and created a new link with nic.de.vu. Then I registered it at google, yahoo etc. I got a message that the registration was successful. But this happened more than four weeks ago. The page works if I type in the adress but I can't find it on any search engine.
    How long does it take or made I a mistake with iWeb?
    I would appreciate help.

    See this page for how to add your URL and create and upload a verification file.....
    http://www.iwebformusicians.com/SearchEngines/Tools.html
    The following pages cover Keywords, Tags and Sitemaps.
    The verification file tells Google that your site exists, the sitemap guides the spiders through it to find relevant keywords in your text.
    All the information about when your site was crawled and what the spiders found is available when you login to your Google Dashboard.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Problem with serial numbers for Lightroom 5

    I bought a physical copy of Lightroom 5, 38 days ago. As my Mac doesn't have a CD driver, I downloaded the 30 days trial version on Adobe website and now my trial time is over I try to enter the serial number I had with the physical package I bought 38 days ago and it doesn't work. Take in note than I converted the serial number from the box (serial number with letters and numbers) into a the active serial number on Adobe website (serial number with numbers only) 38 days ago. This ''active serial number'' doesn't work now ..

    I figured out than my ''active serial number'' was too old. Now I have a new one and I don't know what to do with it. I login Lightroom 5 and my development page is blocked .. It's written I know have 29 days left remaining for my trial version of Lightroom... I have an activation number, what does I do with it know ?

  • Problems with Elements since downloading Lightroom

    Since downloading Lightroom 4, I can't delete anything from Bridge CS4 nor can I save changes made in Elements 8. Can anyone help?

    iOS 5.1 (not 5.0.1) is the current version. If you have 5.0.1 as you say I suggest you update to 5.1 and see if your problems are corrected.

  • Problem with catalog upload program !!

    Hi GURUs,
    Using CCM upload program we are trying to upload a file for deleting/adding/changing supplier catalog items.
    - Some times it work fine.
    - But some times supplier catalog is going into error.
    - The display log on CCM screen is all green with no errors.
    - When checked in SLG1 we are getting error "Error when deleting item XXXXXXX (ID)",though the item is present in supplier  catalog.
    Kindly help.
    Note: We are at CCM2.0
    Thanks in Adv. !!
    Vivek

    Hi Serguei,
    Thanks for your reply.
    our content file format is XLS (Excel sheet). We are having customized program to load the data into CCM. The program inturn convert the .XLS file into XML format. This program is directly submitting the jobs in background to load the data into CCM.
    Due to this I am not sure how to debug this and capture the defect.
    Kindly help.
    Thanks in Adv. !!
    Vivek

Maybe you are looking for