Problems with certain text appearing once exported as HTML on my third party hosting site

Hello,
I am experiencing problems with how certain text is appearing on my website www.pplmedia.com/speakers.
Most of the text is appearing how I want it to once I have exported it out of Muse, but for a reason I can not rectify, certain text is coming out as plain Arial Black text, in a bigger font and the text boxes move slightly. If you go onto the page  www.pplmedia.com/jock-wishart  you will see what I mean.
I have taken the text out of Muse, put it into the program 'TextEdit', I changed the text from rich to plain, put the text back into Muse and the problem still remains.
I have also published the site as a trial in BC and the text is how it should be, so I assume this is an issue with third party hosting I am using?
If someone can get back to me to offer any help or suggestions that would be greatly appreciated.
Regards
Oliver

You are awesome!!! Thanks so much! I have talked to a ton of people this
week, and no one could figure this out. I read your email to the technical
support person at our 3rd Party Host, and she fixed some files that were not
in the correct spot and changed some of the permissions settings. I am up
and running. Thanks for making my Friday!
Re: Adobe Muse Site will not preview properly on Third Party Hosting
Site...Help!
created by adobelance <http://forums.adobe.com/people/adobelance>  in Help
with using Adobe Muse - View the full discussion
<http://forums.adobe.com/message/5227992#5227992>
What's the URL for your uploaded site?
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5227992#5227992
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5227992#5227992 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5227992#5227992. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Help with using Adobe Muse by email
<mailto:[email protected].ad
obe.com>  or at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4761>  For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Need help with optimizing text appearance when exporting video

    Here's what I'm trying to do:
    1. Convert a Powerpoint presentation to an MP4 (AVC) file, frame rate 30 (actually defaults to 29.97) and video bit rate of 1200kbps,using Wondershare PPT2VideoPro.  (There are no actual video clips contained in the original PPT file).
    2. Import the newly created MP4 video into a new project in Premeire Elements.
    3. Add audio files (WAV) created by Audacity.
    4. Export the final product as a video.
    Here's the problem:
    The text quality in the final exported film is very poor, and the screen occasionally seems to sublty flicker once and a while.  I've tried multiple different settings, but all with the same result.
    Can anyone offer suggestions on optimal settings for exporting the final product such that the text is as clear as possible?  (The text in the MP4 file created by Wondershare looks great.)
    Thanks!
    - Ernest

    One option would be to create the Text Images in Photoshop, and Save_As a PSD.
    For large sets of Titles, I do the text portion in Word/WordPerfect, so I can use Spell-Check. Then in PS, I just Copy/Paste the text into an Image, where I apply all of the PS Styles that I need. Because I use PrPro for most of my NLE work, I will often do the Titles with Layered Text, and Import those as a Sequence, so that the Layers are not Flattened. This allows me to independently animate each Layer, as I need. Unfortunately, PrE does not allow one to Import the Layered PSD's, Unflattened, as it does not have Sequences.
    Also note that PrE's Titler's Styles are just a starting point. Once applied, one can alter most aspects, and when they are satisfied with the changes, they can then Save the new Style and re-use it over and over. Do not forget the ability to modify those Styles.
    From PowerPoint, and this depends on the version, the best that one can usually do is to Export each "slide" as a TIFF, and Import those into the NLE program.
    Good luck,
    Hunt

  • Problem with append += text in Text Field

    Hi guys
    i have a problem with append text.
    I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
    Then i have one String and one Text Field.
    Using for loop im getting right results. But when im running script again then im getting  same text again.
    F.ex.
    First time:
    City name: Name 1
    City name: Name 2
    Second time:
    City name: Name 1
    City name: Name 2
    City name: Name 1
    City name: Name 2
    I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
    How to avoid this?
    Here is script:
    for (var i1:int = 0; i1 < CityArea.length; i1++)
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='32' COLOR='#ffffff'>        "+CityArea[i1]+"</FONT></P>";
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='5' COLOR='#ffffff'><BR></FONT></P>";
    _CityAreaTF1 = new TextField();
      _CityAreaTF1.border = true;
      _CityAreaTF1.wordWrap = true;
      _CityAreaTF1.multiline = true;
      _CityAreaTF1.selectable = false;
      _CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
      _CityAreaTF1.name = "CityAreaTF1";
      _CityAreaTF1.embedFonts = true;
      _CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

    I think i found why.
    There was no problem with TextField.
    There was a problem with Array. "CityArea"
    So each time I executed script it added new string in Array. And that is because i got like:
    TextField
    City 1
    City 2
    City 1
    City 2
    Running this script is Ok:
    for (var i1:int = 0; i1 < CityArea.length; i1++)
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='32' COLOR='#ffffff'>        "+CityArea[i1]+"</FONT></P>";
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='5' COLOR='#ffffff'><BR></FONT></P>";
    But outside of this for loop there is another for loop for adding Cities in CityArray.
    I fixed it by adding empty array at the start of function
    function myFunc():void
    CityArea = [ ]; // Empty array fixed this issue
    // LOOP FOR ADDING SHOPS IN CITY AREA
    for (var j:int = 0; j < _Shops; j++)
    CityArea.push(_Shop);
    // FOR LOOP TO ADDING SHOPS IN STRING
    for (var i1:int = 0; i1 < CityArea.length; i1++)
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='32' COLOR='#ffffff'>        "+CityArea[i1]+"</FONT></P>";
      _CityAreaString1 += "<P ALIGN='LEFT'><FONT FACE='Verdana' SIZE='5' COLOR='#ffffff'><BR></FONT></P>";
    Thank you for your help kglad

  • Problem with sending text messages replies

    After update to OS 3.0 I have problem with sending text messages:
    - I CAN send new text message to someone but
    - When someone REPLY me, then I CANNOT send next message in conversation
    - If I DELETE someone's reply from that conversation text message sends fine.
    Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

    no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

  • I have new Ipad...MacBook Pro with Mountain Lion:  I have problems with certain applicaitons not sync'ing (like email, cal, notes)...need help

    I have problems with certain applicaitons not sync'ing (like email, cal, notes)...need help

    There are a few twists here. This is my opinion of a quick and easy way to do what you want to do.
    Get a 2.5" sata enclosure like this one - this is just a sample:
    http://www.amazon.ca/eForCity-2-5-inch-SATA-Enclosure-Blue/dp/B0083OOV9G/ref=sr_ 1_1?ie=UTF8&qid=1360012807&sr=8-1
    Put the new ssd in the enclosure, connect it to the Mac using the included USB cable. It is now an external drive.
    Format the drive using Disk Utility.
    Download and run Carbon Copy cloner, and clone your drive to the new external.
    Shutdown. Open the MBP and remove the SSD drive from the enclosure and put it in the place of the old drive.
    Boot the MBP. Once you know the new drive is up and running, you can get to the process of installing the old one in the optical bay.
    http://mac.tutsplus.com/tutorials/hardware/how-to-upgrade-your-macbook-pro-to-an -ssd/

  • Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

    Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

    Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • A problem with copying text from english pdf to a word file

    i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
    i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

    Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

  • Problem with selecting text in Adobe Reader XI

    Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
    So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
    Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
    This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

    Yeah,  I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
    About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
    I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

  • CS3 - Problem with dynamic text -

    Hello,
    I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

    This is the Flash Player forum; please post your question in the appropriate product forum.

  • Problem with the text from previous year in current year appraisal (PPR)

    Hi Gurus,
    I have some problem with the text from the PPR of the previous year in the PPR current year.
    The text from the previous year have not the same displaying in the tab "previous year" of  the current year PPR.
    EXAMPLE :
    this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
    -Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
    -G1 Unterstüzung
    -Fachübergreifende Teamarbeit ausbauen
    Gefährdungsbeurteilung weiter führen
    -tragen von PSA einfordern
    -VI Opt.(Intervalle)
    -Azubi und Praktikanten AUsbildung unterstüzen
    and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
    -Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
    I think that this issue is created at the creation of the PPR.
    If someone have a idea he is welcom.
    thanks and regards

    Hi,
    Please follow the note:425601,
    Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
    Reward points if found useful.
    Thanks!

  • Why this error message with certain texts?

    Why do i get this error message only with certain texts?  I have entered only a ten digit number, have deleted conversations and resent messages and still?

    Oh, the error message is "
    error invalid number please re-send using valid 10 digit mobile number or valid short code."

  • I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

    I am having problems with certain websits that require adobe flash player

    Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

  • Premiere Elements 13 , Problems with new text/titles

    Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

    High ATR,
    Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
    Grafikkarte: NVIDIA GeForce 8800 GT
    If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
    As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
    Project settings are the following:
    General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
    Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
    The video is a mixture  of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
    When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
    Thank you for your service.
    thomasd
    Von: A.T. Romano 
    Gesendet: Sonntag, 1. Februar 2015 23:55
    An: Thomas Deschler
    Betreff:  Premiere Elements 13 , Problems with new text/titles
    Premiere Elements 13 , Problems with new text/titles
    created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano>  in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

  • Problems with recieving texts?

    I am having problems with recieving text messsages, today I only had 2 hours that I recieved text messages. This has happened a few times, and when I take my phone to the verizon store they say there is no problem. Has anyone else had this problem?

    hoovie,
    I'm sorry to learn you are having issues with your text messaging. Just so I know I am up to speed, are you getting messages delivered to your phone on a 2 hour delay or do you have only a 2 hour window where you can receive any messages? Does this happen with only specific persons? Are you having any trouble sending text messages throughout the day?
    Please advise more information so I can help further.
    Thanks
    AdamE_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • How can you have 2 users on an iPad?

    I have an iPad that needs to be shared with another person in my office. How can I sign out and let her sign in so that each time our own personal apps and emails show up? Is this even possible?

  • Traffic Lights in ALV Tree

    Hi Experts , Could you suggest if we can use traffic lights in ALV tree Display and if possible  program(T-code ) you have gone thorugh. I already checked BCALV_TREE_06 , its totally different just showing icons . Regards, Karan Edited by: Karan_Chow

  • My Iphone 5 is stuck on the connect to itunes screen

    I was trying to do an update on  my iphone through itunes and it was all going through then it just  got stuck on the connect to itunes logo. It won't do anything. I've tried to hold the home and lock button and the apple logo appears then goes back

  • How to set the show properties as  a default in KM

    Hello All, I am trying to upload the documents in KM repository using File-> Upload. If I click this Upload button, it will open a new window, it will show (show properties) this properties. But I want this one as default. Can any one help to set the

  • TransactionTimeout Exception in JPD

    Hi, I wrote one WLI Process(jpd). It contains one explicit transaction, with in that one DB Control method (select query in MS SQL Server), business logic and one more DB Control method (insert query in Oracle). For each node exception block is there