Problems with certificate and signed jad
Hello
I have a third party jar and jad which is signed as far as I can tell.
When I run the jad under the phone emulator.exe I get the text below
Is there something I need to do.
Perhaps to do with keystores etc.
I can install the jar and the application runs but keeps asking for permission to open etc.
Thanks
Jim
C:\Java_ME_platform_SDK_3.0_EA\bin>
C:\Java_ME_platform_SDK_3.0_EA\bin>emulator -Xdescriptor:trekbuddy.jad
Device name is not set. Using -Xdevice:DefaultCldcPhone1 option.
Hint: Use -Xquery argument to see all supported devices.
HTTP server started!
*** Error ***
A problem occured during deploying application from http://127.0.0.1:49813/trekb
uddy.jad
* Reason:
The content provider certificate issuer C=ZA;ST=Western Cape;L=Cape Town;O=Thawt
e Consulting cc;OU=Certification Services Division;CN=Thawte Premium Server CA;E
mailAddress=[email protected] is unknown.
C:\Java_ME_platform_SDK_3.0_EA\bin>
I got the Thawte certificates and after loading just about every one it stopped complaining about the issuer.
How ever it then started on about not autorized for API.
So I gave up in disgust and went back to the the 2.xx toolkit.
This worked out the box.
Jim
Similar Messages
-
Problem with placing self-signed certificate in trust store on WLS 10.3
I have had some problems setting up two-way SSL on WLS 10.3.2.
1. I have not been able to use the java properties listed on
http://weblogic-wonders.com/weblogic/2010/11/09/enforce-weblogic-to-use-sun-ssl-implementation-rather-than-certicom/
to use the native Java SSL implementation rather than the certicom. Has anyone else had success using these?
-Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol
-Dssl.SocketFactory.provider=com.sun.net.ssl.internal.SSLSocketFactoryImpl
-DUseSunHttpHandler=true
-Dweblogic.wsee.client.ssl.usejdk=true (for webservice clients)
2. When I use the ValidateCertChain to validate my keystore with the self-signed certificate I get the message
CA cert not marked with critical BasicConstraint indicating it is a CA
Certificate chain is invalid
which I read was a problem with certificates generated by keytool, yet I find I was not able to circumvent this
by setting the property weblogic.security.SSL.enforceConstraints to off in the WLS server environment.
Has anyone else noticed this?
3. The error I get is
####<Feb 15, 2011 1:12:21 PM EST> <Debug> <SecuritySSL> <hostname> <server
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1297793541204> <BEA-000000> <Exception during hands
hake, stack trace follows
java.lang.NullPointerException
at com.certicom.security.cert.internal.x509.X509V3CertImpl.checkValidity(Unknown Source)
at com.certicom.security.cert.internal.x509.X509V3CertImpl.checkValidity(Unknown Source)
at com.certicom.tls.interfaceimpl.CertificateSupport.findInTrusted_Validity(Unknown Source)
####<Feb 15, 2011 1:12:21 PM EST> <Debug> <SecuritySSL> <hostname> <server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tunin
g)'> <<WLS Kernel>> <> <> <1297793541207> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 40
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
Are there other conditions besides the issue about the missing Basic Constraint field that can raise an
alert with type 40?
4. Steps I used to generate jks keystore for inclusion in trust keystore (actual values substituted):
** keytool -genkey -alias mykey -keystore mykeystore -validity 35600 \
-dname "cn=Common Name, ou=Common Name, o=Org, l=location, s=state, c=US" \
-storepass mypass -keypass mypass
** exported a DER format head certificate of mykey into mykey.cer.der
** keytool -import -trustcacerts -keystore DemoTrust.jks -alias mykey -file mykey.cer.der
Any comments appreciated and thanks for this forum.Faisal,
Certicom has an internal restriction that a Date must be notBefore 1970 and notAfter 2105 inclusive.The Java-generated key is valid until Wed Mar 14 11:03:59 EDT 2108. Your knowledge of this area is
quite impressive, thank you so much for this! -
Can't sign adobe html5 extension - problem with certificate
1. I want to package my html extension for photoshop CC.
2. I have tried to use ZXPSignCmd to build and sign extension package.
3. For self-signed certificate it works.
4. Now we bought root signed certificate from GlobalSign but ZXPSignCmd fails when we try to use it:
Output from ZXPSignCmd:
Unable to build a valid certificate chain. Please make sure that all certificates are included in the certificate file.
We are sure that our certificate & password are correct (inside .p12 file we have 3 certs - root, intermediate and ours).
We tried to use Adobe packaging tools: Configurator / Packager and each of them returns error that there is a problem with certificate. On the other side I was able to use ucf.jar to package another plugin with our certificate - so certificate is correct I guess.
How we can package HTML5 Extension with manifest.xml and sign it with our certificate for Photoshop CC?
We are trying to solve this for few hours so far but nothing seems to work...
Please help.I know this is a late reply, but I thought I would chime in as I was getting the same "Unable to build a valid certificate chain. Please make sure that all certificates are included in the certificate file." error with our new Comodo code signing certificate.
I originally received the code-signing certificate from Comodo as a .p7s file by downloading it from Comodo using Safari on Mac OS X Mavericks. I then imported it into Keychain Access (KA) by double-clicking the .p7s file after it was downloaded. From KA, I selected all of the certificates in the chain (by command-clicking each cert) and then exported them as single .p12 file.
When using this the KA generated .p12 file I got the "certificate chain" error when using the ZXPSignCmd or ucf.jar tool. After way too many hours of head scratching, I decided to import the .p12 file created from KA into FireFox on Mac (v33.0.2) and re-export it from there. To import the .p12 into FireFox go to the import dialog: FireFox > Preferences > Advanced > Certificates Tab > View Certificates Button > Your Certificates Tab > Import Button. Once imported, export it back out as a .p12 file using the "Backup" button in the same dialog box. Yes, you are importing the .p12 just to re-export it as a .p12!
Using the FireFox created .p12 works without error when using ZXPSignCmd and ucf.jar. I don't know if this a Keychain Access issue or if Adobe is just picky about how the .p12 file is created, but having FireFox do the .p12 creation worked for me.
I hope this helps!
-- Jim Birkenseer
www.premediasystems.com -
Problem with Class and Classpath
Hello ME Windows Users, now before you place a wry smile on your face, I have a problem with path and classpath. Stop it, I can see you smiling!
By visiting the the last 10 pages of the forum and reading Sun installation notes, some tooldocs and by given some answers by some nice people, I have become an expert in turning off my computer, about 10 times/hr. I still am trying to make my first cup of java.
With the ME computer,
I'm unable to right click on the desktop and go to properties, advanced,
I'm unable to go go start, run, sysedit,
I'm unable to change the ms-dos window of autoexec.bat, it just shuts down.
Now before you tell me, I should of bought a different computer, the only place I can find to modify the path and classpath is in the environment which is in system configuration under tools. Here I have placed numerous configurations, like
C:\java>set path=%path%;c:\j2sdk1.4.2\bin
C:\java>set classpath=%classpath%;.;
;java_dir\bin where ;java_bin is c:\j2sdk1.4.2
.; java_dir\bin; %path% where ;java_bin is c:\j2sdk1.4.2 and the list goes on.
But, I know you are still smiling, the % signs comes up in a dialog box, saying too many, and will not convert the text to the environment to be saved when I close down for the tenth time in the last hour.
Can someone help me before I make a real cup of coffee and accidentally drop it on the ME box.
Have a laugh on me Mik.C:\java>set path=%path%;c:\j2sdk1.4.2\binGood
But it is no good because it has to many % and a dialog box appears, saying you have too many parameters.
Are you saying I have to shutdown again to answer your ?
From the HELP menu-
To confirm startup commands line by line
Click Start, and then click Shut down.
Click Restart, click OK, and then press and hold the CTRL key until the Windows Startup Menu appears.
Enter the number for Step-by-step confirmation, and then press ENTER.
For each command you want to run, press Y.
If the command runs successfully, you are prompted with the next command.
If the command does not run successfully, you receive an error message.
To skip a command, press N.
Mik -
Problems with SwingWorker and classes in my new job, ;), can you help me?
Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
//Variables relacionadas con la clase original DownloadProgressBar
private InputStream file;
private int totalCicles;
private int totalFiles;
private int currentProgress;
private SwingWorker worker;
private ByteArrayOutputStream byteArray;
private boolean done;
/** Creates new form prueba */
public Form1() {
initComponents();
this.byteArray = new ByteArrayOutputStream();
progressBar.setStringPainted(true);
//this.totalFiles = totalFiles;
currentProgress = 0;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
label1 = new javax.swing.JLabel();
progressBar = new javax.swing.JProgressBar();
statusLabel = new javax.swing.JLabel();
setBackground(new java.awt.Color(255, 255, 255));
setMaximumSize(new java.awt.Dimension(300, 150));
setMinimumSize(new java.awt.Dimension(300, 150));
setPreferredSize(new java.awt.Dimension(300, 150));
label1.setFont(new java.awt.Font("Arial", 1, 18));
label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label1.setText("Barra de progreso");
statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
statusLabel.setText("Cargando");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
this.setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(label1)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(statusLabel)
.addContainerGap(73, Short.MAX_VALUE))
}// </editor-fold>
// Declaraci�n de variables - no modificar
private javax.swing.JLabel label1;
private javax.swing.JProgressBar progressBar;
private javax.swing.JLabel statusLabel;
// Fin de declaraci�n de variables
public byte[] getDownloadedFile(String documentToSign){
//Variables locales
byte puente[] = null;
try{
//Leemos el documento a firmar
StringTokenizer st = new StringTokenizer(documentToSign, ";");
Vector<URL> fileURL = new Vector<URL>();
HttpSender sender = new HttpSender(null);
//Introducimos la lista de URLs de archivos a bajar en el objeto Vector
for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
//Para cada URL descargaremos un archivo
for(int i = 0; i < fileURL.size(); i++) {
file = sender.getMethod((URL)fileURL.get(i));
if(file == null) {
Thread.sleep(1000L);
throw new RuntimeException("Error descarregant el document a signar.");
System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
//Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
this.totalCicles = sender.returnCurrentContentLength() / 1024;
this.progressBar.setMaximum(totalCicles);
//Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
statusLabel.setAlignmentX(0.5F);
*//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
*this.startDownload();*
*System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
*//if (pane.showProgressDialog() == -1) {*
*while (!this.isDone()){*
*System.out.println("No est� acabada la descarga");*
*if (this.isDone()){*
*System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
*puente = this.byteArray.toByteArray();*
*System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
*else{*
*Thread.sleep(5000L);*
*// throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
catch (HeadlessException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (MalformedURLException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (HttpSenderException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (InterruptedException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
//System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
return puente;
public void updateStatus(final int i){
Runnable doSetProgressBarValue = new Runnable() {
public void run() {
progressBar.setValue(i);
SwingUtilities.invokeLater(doSetProgressBarValue);
public void startDownload() {
System.out.println("Form1 Inicio startDownload()");
System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
System.out.println(done);
worker = new SwingWorker() {
public Object construct() {
System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
return doWork();
public void finished() {
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
System.out.println(done);
done = true;
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
System.out.println(done);
statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
worker.start();
System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
System.out.println(done);
System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
* M�todo doWork()
* Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
* la barra de carga del proceso de carga de la GUI.
public Object doWork() {
System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
try {
byte buffer[] = new byte[1024];
for(int c = 0; (c = this.file.read(buffer)) > 0;) {
this.currentProgress++;
updateStatus(this.currentProgress);
this.byteArray.write(buffer, 0, c);
this.byteArray.flush();
this.file.close();
this.currentProgress = totalCicles;
updateStatus(this.currentProgress);
} catch(IOException e) {
e.printStackTrace();
System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
//done = true;
System.out.println("AHORA DONE = TRUE");
return "Done";
public boolean isDone() {
return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
//Variables globales
int paso = 0;
private static final String JS_ONLOAD = "onLoad";
private static final String JS_ONLOADERROR = "onLoadError";
private static final int SIGNATURE_PDF = 1;
private static final int SIGNATURE_XML = 2;
//private String signButtonValue;
private int signatureType;
private String documentToSign;
private String pdfSignatureField;
private Vector<String> outputFilename;
private Color appletBackground = new Color(255, 255, 255);
private Vector<byte[]> ftbsigned;
* Initializes the applet FormularioApplet
public void init(){
try {
SwingUtilities.invokeLater(new Runnable() {
//SwingUtilities.invokeAndWait(new Runnable() {
//java.awt.EventQueue.invokeAndWait(new Runnable() {
public void run() {
try{
readParameters();
initComponents();
catch(FileNotFoundException e){
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch(IOException e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (Exception e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
javascript(JS_ONLOAD, null);
/** This method is called from within the init() method to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
this.setSize(350, 450);
appletPanel = new javax.swing.JPanel();
jPanel1 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JLabel();
jPanel2 = new javax.swing.JPanel();
label = new javax.swing.JLabel();
jPanel3 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
appletPanel.setBackground(new java.awt.Color(255, 255, 255));
appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
jPanel1.setBackground(new java.awt.Color(255, 255, 255));
jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
jTextField1.setText("SIGNATURA ELECTRONICA");
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
.addContainerGap())
jPanel2.setBackground(new java.awt.Color(255, 255, 255));
jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label)
.addContainerGap(229, Short.MAX_VALUE))
jPanel3.setBackground(new java.awt.Color(255, 255, 255));
jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
//this.jButton1.setVisible(false);
//this.jButton2.setVisible(false);
jButton1.setText("Seg\u00fcent");
jButton1.setAlignmentX(0.5F);
//Cargamos el primer formulario en el JPanel2
loadFirstForm();
//Modificamos el texto del bot�n y el contador de pasos.
//this.jButton1.setText("Siguiente");
//this.jButton1.setVisible(true);
//this.jButton2.setVisible(true);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setText("Cancel\u00b7lar");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton2)
.add(jButton1))
.addContainerGap())
org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
appletPanel.setLayout(appletPanelLayout);
appletPanelLayout.setHorizontalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.addContainerGap())
appletPanelLayout.setVerticalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
add(appletPanel, java.awt.BorderLayout.CENTER);
}// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
this.destroy();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
changeForms(this.paso);
// Declaraci�n de variables - no modificar
private javax.swing.JPanel appletPanel;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JLabel jTextField1;
private javax.swing.JLabel label;
// Fin de declaraci�n de variables
* M�todo readParameters
* M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
private void readParameters() throws FileNotFoundException, IOException {
???????????????? deleted for the forum
addSecurityProviders();
* M�tode loadFirstForm
* Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
private void loadFirstForm(){
//Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
//Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
Form1 f1 = new Form1();
//Lo dimensionamos y posicionamos
f1.setSize(310, 150);
f1.setLocation(10, 110);
//A�adimos el formulario al JPanel que lo contendr�
this.jPanel2.add(f1);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Descarreguem l'arxiu a signar
*System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
*byte obj[] = f1.getDownloadedFile(this.documentToSign);*
if (obj == null){
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
else{
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
System.out.println("obj: " + obj.length);
this.ftbsigned.add(obj);
System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
//Indicamos que el primer paso ya se ha efectuado
this.paso++;
* M�tode changeForms
* Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
private void changeForms(int paso){
/*A cada paso se cargar� en el JPanel y formulario diferente
* Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
* Case 1: Se carga el formulario de selecci�n de tipo de firma.
* Case 2: Se carga el formulario de datos de la persona que firma.
this.paso = paso;
switch(paso){
case 1:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form2 f2 = new Form2();
//Lo dimensionamos y posicionamos
f2.setSize(310, 185);
f2.setLocation(10, 110);
//Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f2);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el contador de pasos.
this.paso++;
break;
case 2:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form3 f3 = new Form3();
//Lo dimensionamos y posicionamos
f3.setSize(310, 175);
f3.setLocation(15, 130);
//Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f3);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el texto del bot�n y el contador de pasos.
this.jButton1.setText("Finalizar");
this.paso++;
break;
default:
//Finalizar el Applet
//C�digo que se encargue de guardar el archivo en el disco duro del usuario
break;
private void addSecurityProviders() throws FileNotFoundException, IOException {
Security.addProvider(new CryptoAPIProvider());
if (signatureType == SIGNATURE_PDF) {
Security.addProvider(new BouncyCastleProvider());
else {
Security.addProvider(new Sun());
private File createOutputFile(String filename, int index) {
return new File((String)outputFilename.get(index));
protected Object javascript(String function, String args[]) throws RuntimeException {
//Remove
if (true) return null;
try {
Vector<String> list = new Vector<String>();
if(args != null) {
for(int i = 0; i < args.length; i++) {
list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AMLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Problems with SharePoint2010 and Adobe Reader X
hi all,
i have a big problem with SharePoint2010 and Adobe Reader x. We can open .pdf Files from SharePoint but not Safe. The Error Message is "
SharePoint, SQL and OS are installed in English. The problem is that the site was probably created from a German template. One would have to create the site from an English template and then add the other languages by MUI. It is a matter which language site in the settings under Language Settings is uppermost to:
how can the problem be solved?it looks like here, the reader still an error..
andreHi,
Could you repost the error-message that you see in Adobe Reader? The problem might be because of a known bug in Microsoft SharePoint server 2010. Certain required field types are missing in the German/French site templates which cause a SOAP request on the server to fail. A workaround is to add these field types to the library. You could add these fields manually or using a script. You could look for following field types which might be missing from the site template.
"Content Type ID","Approver Comments","Name","Document Modified By","Document Created By","File Type","HTML File Type","Source URL","Shared File Index","Title","Template Link","HTML File Link","Is Signed", "Document ID Value", "Document ID", "Content Type", "Created", "Created By", "Modified", "Modified By", "Has Copy Destinations", "Copy Source", "Approval Status", "URL Path", "File Size", "Item Type","Sort Type", "Effective Permissions Mask", "ID of the User who has the item Checked Out", "Is Checked out to local", "Checked Out To", "Unique Id", "Client Id", "Virus Status", "Check In Comment", "Edit Menu Table Start", "Edit Menu Table End", "Server Relative URL", "Encoded Absolute URL", "Property Bag", "Level", "Is Current Version", "Item Child Count", "Folder Child Count", "Select", "Edit", "UI Version", "Instance ID", "Order", "Workflow Version", "Workflow Instance ID", "Source Version (Converted Document)", "Source Name (Converted Document)", "Document Concurrency Number","Relink", "Merge", "Path"
Thanks,
Richa -
Having problems with OSX and mail with the servers?
Having problems with OSX and the mail servers? Seems to be happening more and more?
Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
Problem with JFrame and busy/wait Cursor
Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regiszlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro -
Problems with Safari and Firefox (HTTP?)
Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
NanneI'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter -
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
Problem with Send and Receive Emal In SAP System
Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PMHi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael -
Problem with Speaker and Headset in Windows Vista
Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,EdwinWhen you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).
Maybe you are looking for
-
How do I obtain DVD Studio Pro....Only in $1,299 version of Final Cut Pro?
I am new to the Mac world. I have been doing some video editing and DVD authoring on a PC using Easy Media Creator and Nero. I wanted to be able to create more professional looking productions so I purchased my iMac. I have used the iMovie app but it
-
How do I get from an HD sequence in Final Cut Pro to a regular DVD?
Hi, I'm finishing my first HD project, and I'm trying to get it onto a normal DVD, and I can't figure out how I should export it out of Final Cut and what settings I should use in DVD studio pro. I need the dvd to play on normal, couple year old dvd
-
I am using Flash Pro 8. I created a .fla file which contains several objects, each of them has the ActionScript. Now I want to search through all the ActionScript for a variable such as named GeneratedXML (already used somewhere in the application).
-
i am using weblogic 5.1 with apache soap 2.1.i need to do a secure the soap services so i installed server certificates from verisign and set the weblogic properties appropriately.at startup i saw the ssl service start.i was able to view the stuff fr
-
Hi, After running the time evaluation the clock in and clock out corrections is not appearing on the portal. We are using CATS for service provider to enter the clock in and clock out. Is there any back ground jobs which have to be run for the data t