Problems with Cisco VPN & UMTS
Hello!
Just got a new MacBook Pro 2,0 and am busy setting it up for mobile access to our corporate network.
I´m using Cisco VPN Client 4.9.00 (0050).
When I am using my wireless router at home (over a DSL line) everything works fine, but when I am connected over a SonyEricsson K608 UMTS/3G phone, the client does not seem to be able to connect:
Error log is as follows:
1 16:30:34.115 05/28/2006 Sev=Info/4 CM/0x43100002
Begin connection process
2 16:30:34.116 05/28/2006 Sev=Info/4 CM/0x43100004
Establish secure connection using Ethernet
3 16:30:34.116 05/28/2006 Sev=Info/4 CM/0x43100024
Attempt connection with server "xxx.xxx.xxx.xxx"
4 16:30:34.117 05/28/2006 Sev=Info/4 CVPND/0x43400019
Privilege Separation: binding to port: (500).
5 16:30:34.117 05/28/2006 Sev=Info/4 CVPND/0x43400019
Privilege Separation: binding to port: (4500).
6 16:30:34.117 05/28/2006 Sev=Info/6 IKE/0x4300003B
Attempting to establish a connection with xxx.xxx.xxx.xxx.
7 16:30:34.618 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
8 16:30:35.219 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
9 16:30:35.820 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
10 16:30:36.422 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
11 16:30:37.023 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
12 16:30:37.624 05/28/2006 Sev=Warning/2 CVPND/0x83400018
Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319)
13 16:30:37.624 05/28/2006 Sev=Info/4 IKE/0x43000075
Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure.
14 16:30:37.624 05/28/2006 Sev=Warning/2 IKE/0xC300009A
Failed to set up connection data
Has anybody heard of something like that?
I tried the same on a G4 iBook with the same configuration, and everything works fine there.
Bye, Frido.
If you have a data plan on your phone, make sure it is VPN capable. T-mobile has this option. There is something with the routing and proxies that they use.
Most cell providers will also block most ports other than say 80 and other ports they specifically use.
Similar Messages
-
Problem with Cisco VPN client and HP elitebook 2530p windows 7 64-bit
Hi there
I have a HP Elitebook 2530p which i upgraded to windows 7 64-bit. I installed the Cisco VPN client application (ver. 5.0.07.0290 and also 64-bit) and the HP connection manager to connect to the internet through a modem Qualcomm gobi 1000 (that is inside the laptop). When I connect to the VPN, it connects (I write the username and password) but there is no traffic inside de virtual adapter for my servers. When I connect to the internet through wire or wireless internet, I connect de VPN client and there is no problem to establish communication to my servers.
I tried everything, also change the driver and an earlier version of the HP connection manager application. I also talked to HP and they told me that there was a report with this kind of problem and it was delivered to Cisco. I don’t know where is the problem.
Could anyone help me?
Thanks to all.You can try to update Deterministic Network Enhancer to the below listed release which supports
WWAN Drivers.
http://www.citrix.com/lang/English/lp/lp_1680845.asp.
DNE now supports WWAN devices in Win7. Before downloading the latest version of DNEUpdate from the links below, be sure you have the latest
drivers for your network adapters by downloading them from the vendors websites.
For 64-bit: ftp://files.citrix.com/dneupdate64.msi
Hope that helps. -
Problem with Cisco VPN since upgrade to Snow Leopard
Since upgrading to Snow Leopard a couple of hours ago I can no longer open up my CiscoVPN application (version 4.9.01) which I use to connect to my network at work. When I try now I just get an "Error 51: message"
*Error 51: Unable to communicate with the VPN subsystem.*
Please make sure that you have at least one network interface that is currently active and has an IP address and start this application again.
I can still connect to the network if I use Parallels and use the Windows VPN client - but that's not really the point! I've tried the popular suggestion for Error 51 errors in the past (typing "sudo SystemStarter restart CiscoVPN" via Terminal) which doesn't work.
Any ideas or help appreciated.
AcculessI was able to get it working without re-downloading the client (4.9.0.1.0080 was already installed). I noticed that System/Library/StartupItems/CiscoVPN had been removed during the upgrade to snow leopard, so I pulled it back off of a Time Machine backup. Restoring that directory and doing a 'sudo /System/Library/StartupItems/CiscoVPN/CiscoVPN restart' seemed to fix things up.
-
NTP Service on Domain Controller have problem with cisco switch
Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
Lion compatible with Cisco VPN?
Is Lion compatible with Cisco VPN Client 4.9.01?
Yes. Boot up in 32 bit mode and the Cisco VPN client 4.9 will work in Lion.
Restart the mac and hold the 3 and 2 buttons and you'll be in 32 bit mode. The vpn client should work. -
Window 8 WiFi problem with Cisco wireless network
Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad AppThis problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts. -
Problem with Cisco 861W router and outgoing VPN
We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 216.49.160.10 216.49.160.66
default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciatedHello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router. -
IP Communicator doesn't work with Cisco VPN Client
Hi,
Im having problem to connect IP Communicator (either ver 2 or 7 )whenever using Cisco VPN Client 5.0.06.0160 for windows
the IPC didn't register to the CUCM
There's nothing showing on the screen
but whenever im using Anyconnect VPN Client, it works perfectly
The remote side is using ASA5505
Anyone can help ??
ThanksIt's probably an issue with the ASA configuration in your "group-policy attributes". The "split-tunnel-network-list value" is pointing to an access list without the subnet for the call manager. While your ssl group-policy for webvpn has a "split-tunnel network-list value" access-list which does contain the subnet for the call manager.
The other issue could be that your using different ip pools for ipsec and ssl vpn. The ip pool subnet that you might be giving out for ipsec might not be in your "no nat" acl.
Jason -
VPN 720 error with win 8 with Cisco VPN client 5.0.07.0440
Hello,
I have Win 2008 configured as RRAS- VPN server, with win 7/8 VPN clients.
half of these client machines are also running "Cisco VPN client 5.0.07.0440"
all win 7 machines works fine however most of Win 8 will not connect to windows VPN, if they also have Cisco VPN client 5.0.07.0440 intsalled.
Any suggestion.
ThanksWorkaround to this problem is:
1)- Unintsall Cisco VPN client from win 8
2)- reset IP stack -
Problems with Cisco AnyConnect Secure Mobility Client 3.1
Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
The service does not start correctly anymore. I tried reinstabut no help.
Could anyone help me please?
Here my logs.
Thank you very much.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnva
Description : Function: CInstaller::PerformAction
File: .\VACon.cpp
Line: 522
Successfully installed service acsock
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpninstall
Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
File: .\Xml\XmlLocalACPolMgr.cpp
Line: 415
Local Security Policy file already exists and therefore will not be generated
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F84) has been successfully created.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F20) has been successfully created.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
Date : 07/23/2013
Time : 08:49:49
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x000016C0) has been successfully created.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:10
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F34) has been successfully created.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:19
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:20
Type : Information
Source : acvpnui
Description : Initializing vpnapi version 3.1.04059 ().
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getCurrentState
File: .\ClientIfcBase.cpp
Line: 2058
API service not ready
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.nam.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: L2Api::attach
File: .\L2Api.cpp
Line: 87
The NAM/L2 Api could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.websecurity.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: SSApi::attach
File: ..\common\SSApi.cpp
Line: 51
The Web Security API could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Error
Source : acvpnui
Description : Function: MFDartBox::getDARTInstallDir
File: .\MFDartBox.cpp
Line: 332
Invoked Function: MsiEnumProductsExW
Return Code: 259 (0x00000103)
Description: No more data is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getStats
File: .\ClientIfcBase.cpp
Line: 1723
Called when API service not ready.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CSocketTransport::connectTransport
File: .\IPC\SocketTransport.cpp
Line: 981
Invoked Function: ::WSAConnect
Return Code: 10061 (0x0000274D)
Description: No connection could be made because the target machine actively refused it.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::connectIpc
File: .\IPC\IPCTransport.cpp
Line: 252
Invoked Function: CSocketTransport::connectTransport
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::terminateIpcConnection
File: .\IPC\IPCTransport.cpp
Line: 404
Invoked Function: CSocketTransport::writeSocketBlocking
Return Code: -31588319 (0xFE1E0021)
Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initIpc
File: .\ApiIpc.cpp
Line: 423
Invoked Function: CIpcTransport::connectIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initiateAgentConnection
File: .\ApiIpc.cpp
Line: 336
Invoked Function: ApiIpc::initIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::run
File: .\ApiIpc.cpp
Line: 570
Invoked Function: ApiIpc::initiateAgentConnection
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ClientIfcBase::attach
File: .\ClientIfcBase.cpp
Line: 606
Client failed to attach.
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: CMainFrame::OnCreate
File: .\mainfrm.cpp
Line: 342
Invoked Function: The VPN service is not responding or available.
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Function: ClientIfcBase::detach
File: .\ClientIfcBase.cpp
Line: 438
Shutting down vpnapi
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: ConnectMgr::activateConnectEvent
File: .\ConnectMgr.cpp
Line: 1352
NULL object. Cannot establish a connection at this time.
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x0000162C) has been successfully created.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPThere seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it... -
Boot camp with Cisco VPN client and smart card
Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I correct? Im going to an Apple store tomorrow hopefully they can help too.
Thanksmrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman -
Connect sequence with Cisco VPN & BT FON
I have an issue with the connection sequence using Cisco VPN & BT Openzone/FON
I cannot connect the VPN until I have logged in to BT FON/Openzone
This would be ok, but I use a tabbed browser & it is trying to connect all tabs at once over an unsecured link. Also, when (not if) the connection drops I am in the same position.
It should be possible to connect the VPN first, then the browser
Thanks in advance,
Alan
Solved!
Go to Solution.The VPN client connection cannot be established without a path to BT Openzone, which hosts the VPN server.
That`s just the way VPNs work, you have a server and a client.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Mac Pro kernel Panic with Cisco VPN Client
After Having to rebuild my new Mac Pro 3 times I finally found that it was the Cisco VPN Client that was released for Intel in Feb. of this year that does not play nice with the new machines. Don't install or if it's too late boot into Safe Boot mode by holding your shift key during startup and then follow the instructions at the link below.
http://itinfo.mit.edu/answer.php?id=8171Just a heads-up;
the new Cisco VPN Client has now been released and fixes this issue.
The version 4.9.01.0030 specifically resolves the following bugs:
CSCsd51113 feature unity nonwindows set mtu vpnclient.ini field
CSCsd51126 unity mac ppp intel fails with mismatch log message 10.4
CSCsc56445 unity mac rebranding volume name voids rebranding files
CSCsf19841 unity mac does not support 64 bit mac pro platform
Cheers,
Dan -
Unable to access satellite offices with Cisco VPN client
There are 4 sites:
Main office - 192.168.0.x/24
Sat office1 - 10.0.0.x/24
Sat Office2 - 10.0.1.x/24
Sat Office3 - 10.0.2.x/24
All 4 offices are connected via MPLS using other Cisco routers from the telcom co. The user VPN endpoint is at the main office. (Cisco 1811)
We can make the VPN connection with the Cisco VPN client and browse the 192 network all day long. We cannot access any of the other subnets over the VPN connection. Browsing the other subnets while physically at the main office is fine. This DID work in the past. Something changed that I cannot pinpoint, any ideas?
Scope for the VPN endusers is 10.100.100.x/24
Cisco VPN Client versions 4.x and 5.x (both affected)
Thanks in advanceKen
It is good to know that it did work in the past and then stopped working. That indicates that something changed. Is it possible that a software upgrade has been done and that the change is behavior is reflecting a different version of IOS? (I suspect that is is possible but not so likely - but we need to ask.)
My guess is either that there was some change in the routing logic or that the access lists which indicate what traffic is to be protected by the VPN used to include remote to remote but has been changed for some reason.
Could you post the configuration of the main office 1811?
Another question that occurs to me is whether the main office 1811 is directly connected to the Internet or does it go through some firewall? If if goes through some firewall is it possible that there has been some change in the firewall rules that is denying the remote to remote traffic?
HTH
Rick -
Dear Experts,
My switch running is normal but suddenly it has problem with red light(Output fail) as attached file.
I also try reboot but seem to switch can not
There is output while switch reboot:
* Welcome to Rom Monitor for WS-X45-SUP6-E System. *
* Copyright (c) 2003-2009 by Cisco Systems, Inc. *
* All rights reserved. *
Flash die # 0: Intel 33554432Bytes
Flash die # 1: Intel 33554432Bytes
Flash die # 2: Intel 33554432Bytes
Flash die # 3: Intel 33554432Bytes
Determining FTL format status of volume.
Volume is FTL formatted.
Checking the partition table and boot sector...
Checking FAT, Files and Directories...
Reclaiming unused space...
Updating FAT...
Rom Monitor Program Version 12.2(44r)SG5
CPU Rev: 2.1, Board Rev: 6, Board Type: 10, CPLD Jawa Rev: 18
Chassis: WS-C4507R-E
Front Panel Phy is Bcm5482s
Got Mac Address: 00:25:84:1e:33:bc
MAC Address : 00-25-84-1e-33-bc
Ip Address : Not set.
Netmask : Not set.
Gateway : Not set.
TftpServer : Not set.
***** The system will autoboot in 5 seconds *****
Type control-C to prevent autobooting.
******** The system will autoboot now ********
config-register = 0x2101
Autobooting using the first file from bootflash.....
Rommon reg: 0x00004380
Reset2Reg: 0x00000FFF
Darkside controller 0x0B394EBC..0x0B3A326E original size:0x00012092#
Tatooine controller 0x0B3A326F..0x0B40C25B original size:0x00094F89##
Forerunner controller 0x0B40C25C..0x0B4D1EA8 original size:0x001D0F9C
diagsk5 version 3.2_a
prod: WS-X45-SUP6-E part: 73-10597-12 serial: JAE14190WMV
Power-on-self-test for Module 3: WS-X45-SUP6-E
Test Status: (. = Pass, F = Fail, U = Untested)
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Looopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
Switching Subsystem Memory ...
Packet Memory Test Results: Pass
Module 3 Passed
Exiting to ios...
Rommon reg: 0x00000380
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Version 12.2(50)SG3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 07-Jul-09 20:28 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x1222AE9C
Any help are appreciated
Thanks & Regards,Hi,
See this:
Table A-8 1400 W AC-Input Power Supply LEDs
LED
Meaning
INPUT OK
•Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.)
•Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off.
FAN OK
•Green—Power supply fan is operating properly.
•Off—Power supply fan failure is detected.
OUTPUT FAIL
•Red—Problem with one or more of the DC-output voltages of the power supply is detected.
•Off—DC-output voltage with acceptable margins.
Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray assembly and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray assembly, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/catalyst4500e/installation/guide/0aspecs.html#wp1047656
Hope it helps.
Maybe you are looking for
-
How do I delete photos and photo albums from my iPhone 4? The instructions given do not work. No "delete" symbol appears next to the album name when I press "Edit," and no trash can icon for me to click appears below most of the individual photos in
-
Remote Desktop Connection (RDC) No longer working - Please help!
Ok... here we go. I cannot RDC to my network at work. I originally was using a PC and was able to connect a few times using RDC before it stopped working. It would not connect either wirelessly or connected via ethernet cable no matter what I trie
-
Foreign server or JMS Bridge?
Weblogic 11g WebsphereMQ 7 Good morning, I have a question regarding JMS architecture. We're going to deploy a new app using JMS but all the messaging architecture will be on WebshereMQ. Our middleware team recommends us to create a foreign server to
-
I want to use LR mobile to transfer some files to my iPad. Do I need to resize and convert to jpg before setting up a folder for transfer? Do I just set uo the transfer file as a collection?
-
Datapump process cannot connect to REMOTE HOST.
hi, I am using ORACLE DATABASE 11g on 2 servers. Both have IBM AIX OS in it. I am trying to implement Golden Gate(GG) on it. The scenario is as follows :- Server 1 :- I have created 1 extract and 1 datapump processes. GGSCI (JLFLXFC1) 228> info all P