Problems with color printing in PSE 6.0

I have installed a HP Premium Photosmart All-in-One Printer. It prints pictures with excellent picture and quality color when I print from My Pictures. The picture and color quality when I print from PSE Organizer is very poor. I have Color Management set to Adobe RGB. Can anyone give suggestions on what I need to do so I can print good, quality photos from Organizer? I appreciate any ideas.

There are various opinions on how to deal with this problem. Try this:
Print from Editor. Yes, the experts assert that the print engine differs between editor and organizer.
Calibrate your monitor
In Editor, Color settings>sRGB
In printer setup>properties>print space>same as source. The idea here is that you do not want both Elements and the printer to manage the color output.

Similar Messages

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Java update causes problems with color printing in Mac 10.5

Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
Problem solved! Clearly not the printer.

Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
Renee

Problem with Color Print in Illustrator. Photoshop fine. Epson R2400

OK.. I’ve spent all morning trying to troubleshoot bad color on Illustrator CS4 to Epson R2400 and can’t find a solution. Mac 10.5.8
I’m getting off color (but a neutral grayscale) when printing to from AI 14.0 to Epson Stylus Photo R2400. This just started today. The graphic prints fine in Photoshop.
The main color in logo is R-125, G-69, B-73 in sRGB editing space. It prints very magenta from AI to Epson 2400. Prints fine to my HP laser and fine to PDF.
I’m not new to Color Management and I’ve double-checked all the usual suspects.
Recalibrated Monitor
Re-installed Epson print driver (v6.57)
checked ink nozzles
Checked color settings (synched in Bridge to NA Gen Purpose 2)
checked proper document and printer/paper profile are selected (sRGB to Matte HW)
checked Relative Colorimetric
in Printer dialog checked proper Media Type selected (Epson Matte HW)
and that Color Settings were set to No Color Management.
trashed AI Preferences.
I’m using Epson Inks and Papers.
Same image prints fine from Photoshop using same color settings.
any other ideas?
Thanks much.
Charles

Yea! Working today. One of these things did it, I think. (unfortunately, I did not test after each one)
Recalibrated monitor, again
Trashed Epson Printer Utility from its Utilities folder
Reinstalled Epson driver, again
Deleted all my Presets in the OS Print Set Up dialog box.
So, one of those things helped, or benevolent weekend gremlins.

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Problem with java print

Hi, I'm have problems with java print (g2d). For example i want to print a String "ABC**************************DEF" on paper size 80mm width (invoice paper). I can print all that string with paper A4 size, but with paper size 80mm i have problem with that String, the result is "C*****************D" lost AB and EF. I think i had problem with paper size, pls help me. Thank you so much.
My code is below:
package app.util;
To change this template, choose Tools | Templates
and open the template in the editor.
@author HUU NGHIA
// Printing Sample code
// This code demonstrates the Java 2 print mechanism
import com.connection.Product;
import java.awt.;
import java.awt.print.;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Vector;
// Define a class that is called per page that needs printing. It implements
// the one and only method in the Printable interface : print. Note that
// this is quite separate from the PrinterJob class print() method.
// This method does not actually do any printing. All it does is write text
// and/or graphics onto the passed page (graphics context). The calling
// printer job object will then pass this page to the printer.
public class PrinterController {
public static void print(Vector<Product> products) {
// Create an object that will hold all print parameters, such as
// page size, printer resolution. In addition, it manages the print
// process (job).
PrinterJob job = PrinterJob.getPrinterJob();
// It is first called to tell it what object will print each page.
job.setPrintable(new PrintObject(products));
// Then it is called to display the standard print options dialog.
if (job.printDialog()) {
// If the user has pressed OK (printDialog returns true), then go
// ahead with the printing. This is started by the simple call to
// the job print() method. When it runs, it calls the page print
// object for page index 0. Then page index 1, 2, and so on
// until NO_SUCH_PAGE is returned.
try {
job.print();
} catch (PrinterException e) {
e.printStackTrace();
class PrintObject implements Printable {
Vector<Product> products;
public PrintObject(Vector<Product> products) {
this.products = products;
public int print(Graphics g, PageFormat f, int pageIndex) {
Graphics2D g2 = (Graphics2D) g; // Allow use of Java 2 graphics on
// the print pages :
System.out.println("f.getImageableX(): " f.getImageableX());
// A simple circle to go on the second page (index = 1).
switch (pageIndex) {
case 0:
printInvoiceTemplate(g2, products);
return PAGE_EXISTS;
// case 1 : g2.setColor(Color.red); // Page 2 : print a circle
// g2.draw(circle);
// return PAGE_EXISTS;
default:
return NO_SUCH_PAGE; // No other pages
public String getDate(){
Date d = new Date();
SimpleDateFormat sp = new SimpleDateFormat("dd/MM/yyyy hh:mm:ss");
return sp.format(d);
private void printInvoiceTemplate(Graphics2D g2, Vector<Product> products) {
//System.out.println("#######" cardInfo.getTranType());
int alignY = 40;
int alignXCenter = 60;
int enterSpace = 15;
int xProductName = 10;
int xUnit = 85;
int xAmt = 110;
int xTotal = 155;
int yEndData = 0;
int totalAll = 0;
g2.setColor(Color.black); // Page 1 : print a rectangle
g2.setFont(new Font("Verdana", 0, 8));
g2.drawString("ABC", alignXCenter, alignY);
g2.drawString("123WWW", alignXCenter, alignY enterSpace *1);
g2.drawString("Phone: (08)62891633", alignXCenter, alignY enterSpace*2);
g2.setFont(new Font("Verdana", 1, 12));
g2.drawString("Invoice", alignXCenter - 10, alignY enterSpace*4);
products = new Vector<Product>();
for (int i = 0; i < 10; i+) {
Product product = new Product();
product.setProductName("ZESTORETIC TAB 20MG B/28" i);
product.setUnit("v"+i);
product.setAmt(5+i);
product.setPrice(50000+i);
products.add(product);
for (int i = 0; i < products.size(); i+) {
System.err.println(i);
int total = products.get(i).getAmt()*products.get(i).getPrice();
g2.drawString(i+1+"."products.get(i).getProductName(), xProductName+2, alignY enterSpace(8+(i*2)));
g2.drawString(products.get(i).getUnit(), xUnit+5, alignY enterSpace*(9(i*2)));
g2.drawString(products.get(i).getAmt()"x"+AppUtils.formatPrice(products.get(i).getPrice())"", xAmt+5, alignY enterSpace*(9(i*2)));
g2.drawString(AppUtils.formatPrice(total), xTotal+15, alignY enterSpace*(9(i*2)));
yEndData = 9+(i*2);
totalAll = totalAll total;
System.out.println(yEndData);
g2.drawLine(xProductName, alignY enterSpace*(yEndData 1), 210, alignY enterSpace*(yEndData 1));
g2.drawString(AppUtils.formatPrice(totalAll)" VND", xAmt, alignY enterSpace*(yEndData 2));
g2.drawString("Thank you", alignXCenter, alignY enterSpace*(yEndData 4));
g2.drawString("***", alignXCenter 30, alignY enterSpace*(yEndData + 5));
public static void main(String[] args) {
PrinterController.print(null);
}

When you posted you didn't use code tags, as a result the forum software has interpreted some of your characters in your program as screen formatting codes and has corrupted your post--the most easily observable change is the bolded characters in you post. Please repost your code using code tags so people will be helping with uncorrupted code.

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe

517joe wrote:
I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe
You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

Problems with color printing in PSE 6.0

Similar Messages

Maybe you are looking for