Problems with colors, creating jpeg JPEGCodec

Hi,
i create jpeg file from bufferedimage:
JPEGImageEncoder encoder =JPEGCodec.createJPEGEncoder(out);
JPEGEncodeParam param=encoder.getDefaultJPEGEncodeParam(Image);
encoder.encode(image,param);
But the background of image (white) becomes in jpeg file light orange.
Is it possible to correct it?
Thanks and Regards,

ImageIO.write?

Similar Messages

  • Strange problem with color measure in Mac.

    Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
    I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
    Thank you for your time
    Marcelo.

    Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
    is there any way to make the OS X color measure tool to measure the original color values
    You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
    i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
    Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Problems with colors running CS4 and W7.

    Hey everyone.
    I'm having some MASSIVE problems with colors on my system.
    Windows 7 Prof 64bit
    Photoshop CS4 64bit
    6g Ram
    1T hard drive
    Nvidia GeForce 9800 GTX+
    Dell SE198WFP Monitor 
    The system itself is a Dell Inspiron 530 that I put into a Black Widow V9 gaming tower. 
    Here is an example of the issue I'm having: 
    http://findae.deviantart.com/art/Converge-101214480
    http://i38.tinypic.com/bjcymr.jpg 
    The top image is a (admittedly old and crappy, but it shows the problem) photo that I had previously edited and put in my portfolio. The tinypic below is the result of copying that photo from the portfolio, pasting it into photoshop, and then saving it into a jpg. As you can see, the transitions between colors and the contrast are a complete mess. 
    Thing is, my hard drive recently quit on me, and I had to install the operating system and such on a new drive. I remember having this problem with the system when I first had it, but it either went away on its own or I fixed it somehow before. Now I can't remember for the life of me how I got rid of the problem, and I certainly don't know what the problem is in the first place. I'm tempted to think it may not be photoshop itself, but the problem seems to be especially bad when I'm working with photos. 
    Anyone have any idea what the problem might be and how to solve it? 
    Edit: I also noticed it when viewing http://findae.deviantart.com/gallery/#/d1hni37 in firefox, whereas the other photo appeared to be ok before I copied and pasted it. It has extremely obvious lines of green and orange in the transition from light skin tone to dark skin tone. Annoyingly enough, this doesn't show up in the thumbnail within my gallery at all, only when I click on the thumbnail and see the fullsize image. Extremely frustrating.  
    Here's another good look at the problem while selecting a color in photoshop: http://i37.tinypic.com/2h6t7gh.jpg  All I did was screenshot it a few times, and it deteriorated to that point.

    Screen glitches like color blocks appearing where they shouldn't could indicate a problem with your video drivers.
    Go to the nVidia site and see if they've released any updated drivers; people often report that updated drivers are correcting current problems with Photoshop.
    http://www.nvidia.com/object/win7-winvista-64bit-258.96-whql-driver.html
    Note the recent (3 weeks ago) release.
    -Noel

  • Problem with colors showing in PE10

    Is there a known problem with color in Elements 10?
    I have a gif that when opened in paint shows the light blue color correctly but in PSE10 shows as a buff color.
    Red, yellow and blue seem about right.
    It doesnt matter if it is the gif or the psd file the color showns the same in PSE10.
    Is there a setting or could something be corrupted.

    Bump.
    I have uninstalled and reinstalled Elements and get the same result.
    Is there a way to adjust the colors represented in Elements 10?

  • Authorization problem with VF01 "Create Billing Documents"

    Dear All,
    We face following problem with VF01 "Create Billing Documents".
    Transaction: VF01
    User: Joe
    Authorization of Joe:
         VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
         FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
    The objective for Joe:
       Joe is qualified to create bills in
          sales org A only for billing type 1 and in
          sales org B only for billing type 2.
       Joe should not be able to create bills for
          sales org A with billing type 2 and in
          sales org B with billing type 1.
    How can we solve this problem?
    We already searched for userexits without any success.
    Any help or ideas are very appreciated.
    Regards
    Markus Wilhelm
    Project Manager ERP

    Dear,
    There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
    An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
    The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
    So maybe it is easier to have a different sales organization.
    Another option would be to create a new authorization object and check it in the billing documents.
    If you wish, you could modify program LV60A005 & LV60A006.
    Then you might check various user/customer exits.
    Some functions to check: EXIT_SAPLV60A_001/002,
    EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
    Regards,
    R.Brahmankar

  • Problem with implicitly created Oracle pipes

    Hi, I am having a problem with implicitly created Oracle pipes. I am not sure if this is the correct forum for this topic, but I could not see one which suited better..
    I am using Oracle pipes as a commiunication mechanism between processes (some are written in PL/SQL and other in PRO*C).
    The general problem I have is that if a timeout occurs during the communication process, I end up with 1 or perhaps 2 implicitly created pipes.
    The biggest problem for me is that I am unable to determine if a create is implicitly created (via dbms_pipe.send_message or receive_message). This causes problems, since these implicitly created pipes are left behind and not deleted. I'll show you the basic flow of the processes and you shall see my problem.
    server: create request pipe "req_pipe"
    server: listen for request on requests pipe.
    client: create two pipes for comms with server.
    client: send request and the names of the newly created pipes to the server.
    server: read request and pipename from request pipe (from this point all comms between the client and server are now done over the 2 pipes the client created).
    server: send ack message to client to ensure they are still there (since requests can be queued in the request pipe and clients could have timed out before the request is received)
    client: send "i'm still here" ack back to the server.
    server: process request and send result back to client.
    client: send ack back to server to let server know we have received the response.
    server: send ack back to client to show that work is now committed.
    OK thats the general event flow. I use the rule, that pipes created by a process are removed by a process. So the client always removes the pipes it created in all situations. But since this can happen at any point we can get in the situation:
    client: timeout occurs, delete pipes.
    server: send message to client (creates an implicit pipe) and therefor works (no errors raised)
    server: do a read for response from previous message. (implicitly creates pipe) (will fail).
    Now we have two implicitly created pipes! These pipes will exist until the database instance is shutdown, and in a poorly performing environment, we could get thousands of these pipes lying around... not a good situation.
    How can I either stop pipes being implicilty created, or how do I detect if a pipe was implicitly created.
    I have tried a couple of things, like using v$db_pipes to check if a pipe exists before doing send/reveive calls but this is FAR to slow to do a select on that view.
    We have also looked at keeping a record of pipes created by the client then have some process (perhaps the server) clean up these pipes after some time frame. This is a workable solution but is not favourable since it adds extra overhead having to check these pipes often, and created an extra level of complexity which is not required..
    Any suggestions will be greatly appreciated.
    Feel free to email me with any suggestions on my email provided below, or just post a reply to this formum..
    Many thanks,
    Karl Bridger
    [email protected]

    I solved the problem by changing the SOAP massage format from Document/Wrapped to Document/Literal

  • Java update causes problems with color printing in Mac 10.5

    Had a big problem with color printing for the last two weeks. Thought the printer was broken because it would freeze and refuse to be "seen", or would generate error messages. Bought new Samsung 315, and had the SAME problem. Bought new HP CP1518ni, and had the SAME problem. Not resolved after talking to tech support at both places.
    Looked for software updates around the time of the onset of printing problems. on May 15 installed "Java for Mac OS X 10.5 update" (1.0) (am running on 10.5.8). Removed the Java preferences files (com.apple.java......plist) and restarted.
    Problem solved! Clearly not the printer.

    Hmmm. This is about the time my printer stopped printing too. I've now had two printers in my house and had trouble with both of them. What a pain we should not have to delete updates for our stuff to work together.
    Renee

  • 4400F scanner has problems with color slides

    About six years after buying the 4400F scanner, I finally opened it today in order to start scanning a lot of color slides going back more than 40 years.  It seems as if the software (or the scanner itself) doesn't know where one slide ends and the next one begins.  The slide holder accommodates up to four slides.  Using several methods of scanning permitted by the software, I obtain either three or five JPEG scans.  In the case of three, the images are properly centered--only the final one is missing.  In the case of five, the images are all off-center.  
    Has anyone had a similar problem with this unit and the software when scanning slides?
    EG 

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Problem with colors when print to pdf in FM9

    Hi,
    we have some problems with printing colors to pdf with FM9.
    The FM document contains (1) eps file with a green box and (2) a rectangle created with FM graphic tools, filled with the same green color values (91/0/60/44)
    In FrameMaker the two colors really looks different, but so what, in the PDF both colors (eps) and rectangle got the same correct green color.
    Ok, the were different in creation, so they were CMYK and RGB, but your print shop could manage that.
    Now in FM 9:
    (1) If I do a "save as PDF"  and switch OFF "convert CMYK to RGB" the resulting PDF is the same as from FM8 (correct)
    (2) If I print to PDF via distiller and define the job options to "convert all colors to CMYK" the resulting rectangle green is very  different from the eps green.
    I tried different job options, the best result was "convert all colors to CMYK", other options just very more ugly.
    Does someone of you know a solution for your problem? Help is very appreciated. I could send example files if necessary.
    Thanks in advance.
    PK

    PK-ulm wrote:
    But we want to use the print option, using the distiller.
    Pia,
    this last sentence needs some explanation, I think. Why do you want to use the print option?
    Using the print option, you still go the same route as FrameMaker Win always did, which is using the RGB-only Windows postscript driver. Now, with FM9, you have the option to get CMYK colors directly to PDF, as defined, without any color conversion. And it *does* work, as long as you restrict your documents to either CMYK colors or spot colors coming from the FM libraries.
    So, again: why do you want to use the print option?
    On a sidenote: I'm not sure if I interpret your username correctly, but if you are able to understand German, you'll find some in-depth color tests made with FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs____getestet_P387800.html
    Bernd

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Problem with colors and bits

    So I have this problem, I made a drawing with my tablet in 32bit color in photoshop and I want to save it as a TIFF file, but when I save it the image that is the tiff file is black and white and the cuality is not good.I think there is some kind of problem with the RGB color.If someone can tell me how to fix this ?
    Also when I try to change the image to 16 or 8 bit(so I can save it as a JPEG file), it looses all its effect like details made with brush with low opacity.I really hope someone can help me out

    Just to be clear, 32 bit color (when used with an RGB image) is 32 bits each for red, green, and blue = 96 bits / pixel.
    The use of images carrying 32 bit color is uncommon, and this format is used primarily in editing to deal with High Dynamic Range imagery.  I suspect whatever tool you're using to view the TIFF you saved with 32 bit color is unable to deal with the format, which is why you're seeing it looking poorly and in black and white.
    Your instinct is correct to reduce the bit depth to save in a more common format.
    However, you should not be seeing a visible degradation when reducing the bit depth to 16 bits / channel.  That's still a very accurate format.  How are you "changing the image to 16 or 8 bit", specifically?
    -Noel

  • Problems with color from Photoshop to InDesign CS2?

    Hi all,
    Couple of questions:
    When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
    Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
    thanks for all your help,
    Alex

    >When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
    It's not abnormal, but it will depend on what color spaces the objects are in and the color space that you choose to proof.
    >Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
    You have a lot of choices for how to set up color management. I usually leave my settings set up for my most common situation, US Sheetfed coated and Adobe RGB, but if I have a special job I can reassign the document color space (notice I said Assign, not convert, in order to preserve the native object color numbers). You can proof the color in either the Working CMYK (the one in the color settings) the Document CMYK (if that's different) or something else entirely if you are repurposing an existing document for a new output method.
    When you proof colors, InDesign calculates the conversions on the fly and displays the results. RGB objects will almost always show some shifting due to gamut differences, but the type and degree will depend on the rendering intent you specify. CMYK objects tend not to show as much shifting because the gamuts are likely to be closer, but again it will depend on the exact profiles and intents. Objects that are already in the chosen proofing space should not show any shift at all.
    There is a caveat here regarding working in one space and outputting in another: If you want the colors to be as close as possible you will be converting to the new profile, which will by necessity change some color numbers to match the appearance. This is not usually a problem with things like photographs, but other things, like type, which is created as 100% K can be converted to a four-color mix which is not good. If you know the output conditions, I always recommend setting the document CMYK to that space when you start.
    Peter

  • Problems with color display

    I'm having a problem with managing color display from Aperture - I have a similar problem with Lightroom so I suspect there is something messed up somewhere that I don't understand.
    I've been processing RAW files from Canon 400D. I color adjust in Aperture and then export as JPEG. the resulting files had a red/orange cast when viewed in Preview. Interestingly the same red/orange cast appears when I switch Aperture in full-screen mode! If I import the JPEGs into iPhoto they have have the cast - however the cast disappears (and the color goes back to what I expect) when I go into Edit mode in iPhoto. It looks like JPEGs from Aperture has sRGB profiles assigned. Exporting as TIFF doesn't help.
    A similar things happens from Lightroom, ie the colours look right in LR, but exported JPEGs get the same red-orange cast when viewed in Preview whether I assign sRGB or AdobeRGB.
    Photoshop and Graphic Convertor appear to display the images correctly.
    It seems to me that the FInder, Preview and the full screen mode in Aperture may not be using color profiles accurately?
    Any suggestions would be greatly appreciated!
    Adrian
    EyeOne Display (using EyeOneMatch 3.6.2)
    Aperture 2.0.1

    Update:
    I've checked this:
    -Aux (Dock-Connector) of the iPod has no damage, no problems playing music in the car!
    -Same Problem now with iPhone. It gets charged and so, but if I want to listen to music it is very quiet, music is playing for half a second or so, after that stopped, than goes on playing for a second or so. Cracking sounds often while music is stopped.
    So the Dock is broken, I guess.
    Any possibility to restart/resert or so by my own or try to get it fixed by apple?
    Greetz!

  • A little problem with color profiles

    I am trying LR and so far I love it, it has successfully replaced RSP for me, and also beat Bibble which I briefly considered but didn't like due to the weird UI.
    However, I have a little problem with colours, which has never happened so far with other converters, and I am hoping you can help me to solve it.
    My monitor is calibrated with the Spyder and the appropriate profile loaded in the video card.
    When I work on a RAW image in LR, and then export a sRGB JPG, and then open it with a browser, or the Win viewer, I see it redder. If I open the image in Faststone, I see it almost sepia.
    If I export a TIFF and open it in PS, I see it as in LR, but when I export a JPG from PS (this is my typical workflow), the resulting image has the same problem.
    Considering that my entire workflow is in sRGB, can anybody coach me as to the correct settings I must use in order to obtain a final sRGB image with the same colors as in LR? I think that I must be doing something wrong, as the program behaves consistently with PS.
    Thank you in advance for any help you will be able to provide.
    Andrea,
    from Italy

    Funny how it's only Windows users that have this 'problem'.
    This is not a 'problem' at all. The only 'problem' here is that you've been used to using non-color-managed applications. Suddenly, Lightroom comes in as a mature, color-managed, program... and you're all going bonkers.
    Mac users aren't going bonkers because we're used to using color-managed applications (Preview, Safari, etc. are all color-managed on a Mac).
    Let me clarify for you that by 'color-managed', I mean that the software is *not only* reading the embedded profile in your image, but is *also* converting, on-the-fly, the RGB values of that image to a new set of RGB values that compensates for the native response of your monitor. Say, for example, your monitor only displays a narrow gamut of reds. Chances are, then, that LR or PS will intelligently compensate for this by saturating reds before sending to your monitor. This is how color management works. You can now imagine the disastrous effects that a bad/inaccurate monitor profile might have...
    Your Windows applications, such as 'Viewer', use the Microsoft ICM 2.0 API. This *will* read the embedded profile in an image, but instead of converting to your monitor profile for output, will simply convert to sRGB. That's basically like half-a$$ color-management. Read more about it here:
    http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/prdn_img_vkev.ms px?mfr=true
    Firefox & IE don't even use the ICM 2.9 API, making them entirely non-color-managed. Whatever the raw RGB values are in your image, these applications spit out at your monitor.
    It's very important you understand these simple concepts before proceeding any further.
    OK, ready?
    The original monitor profile that came with my MacBook Pro (profiled by someone over at Apple generically for all MacBook Pro LCDs, I guess) really seems to have underestimated the gamut of my monitor. Hence, color-managed applications compensated for this be resaturating my images (especially in the oranges/reds) before outputting to monitor. Therefore, images looked really nice and saturated in color-managed applications; however, when I exported them to sRGB JPEGs and then uploaded to the web, they looked desaturated (in Firefox, NOT in Safari, since Safari is color managed). They even looked desaturated on other people's monitors (these 'other people' were your average Joes...).
    I then profiled my monitor using an i1 colorimeter. A 3-D plot of my monitor profile now showed that it actually had a much larger gamut than what Apple had predicted in their profile (but this gamut was still much smaller than sRGB, or the gamut of my Dell LCD or Sony CRT, etc.). Therefore, now, LR and PS, using this new profile, showed images much less saturated. Now when I made my edits, and then exported to sRGB JPEGs, images looked slightly *more* saturated in non-color-managed applications and on other people's computers.
    So, you see, your monitor profile affects how you make adjustments/edits in color-managed programs. If your hardware profiler profiled your monitor incorrectly (which I assume is the problem here), then you may be over-saturating certain colors within LR, skewing those RGB values so that a non-color-managed program, which will not re-correct these values as LR is doing, will display the image with too much, say, red.
    Bad monitor profiling also explains why you see this problem only on certain images/colors... if it were a LR problem, you'd most likely see it on every export. The color variance is more than likely due to a bad monitor profile that is not accurately describing your monitor's native response... hence LR/PS are incorrectly adjusting your images before sending to the monitor.
    And at this point, please don't resort to saying "but the colors in the web browser look 'right' and LR looks 'wrong'". This statement has no meaning, as what looks 'right' to you in your web browser might look horrible to someone else with a different monitor. The point of color-management is to minimize these differences. For example, I was very unhappy by how desaturated my images looked on the web compared to in PS before I calibrated my monitor. Now, images look slightly *more* saturated on the web than in LR/PS, which I'm OK with. *Should* they look the same? Heck no. Similar? Yes. Is it better if they do look the same after hardware profiling? Yes, if your main goal is web export, but, keep in mind, the only way they *would* look the same after PROPER hardware profiling would be if your monitor happened to have a very sRGB-like response (to explain this would take another few paragraphs... but you should be able to figure it out if you ponder a bit).
    I hope this is making sense. Let me ask you a couple questions now:
    1.) For your headshot image, IMG_8860, which colors look 'right' to you -- the colors in LR, or the colors upon export (i.e. the headshot on the left or the right in your link above)?
    2.) How exactly did your profile your monitor? Was it in the dark? I had quite a bit of variance in my monitor profile depending on whether or not the Mac OS X dock was visible at the bottom of the screen -- the light from the dock leaked into the colorimeter which then led to profiles that generated yellow/green color casts.
    -Rishi

Maybe you are looking for

  • User gets error message when logging into a new pc "Outlook is using anold copy of your .ost"

    We have a user who needs to login to multiple pc's. When she logs into a new pc and opens Outlook she gets the error. "Outlook is using an old copy of your Outlook data fuile (.ost). Exit Outlook, delete the file, and restart Outlook. Anew file will

  • HP Color LaserJet 2600n issues

    If someone could assist me I would truly appreciate it. I have an HP Color LaserJet 2600n that has been installed on my network (I inherited it 2 years ago) and has been working without any issues.  We recently moved our print server to a new server

  • Customer cancels purchase order

    Hi alltogether, I have to give a recommendation for the following case: - user created a customer order with one item and item cat. TAB! - user created a po with ME57/ME21N and ordered the parts - user received the parts (with or w/o MIGO, doesn't ma

  • Fate of SD 3-4  years from now

    HI gurus, I am an SD consultant with good ABAP Knowledge.. Can u suggest me what might the demand for SD 3-4 years down the lane( keeping the increasing people flow into SD JOBS in mind) If SD is not good ,, then wht module must we switch to Does it

  • VWLC issue with guest vlan

    Hi Team, I installed Cisco vWLC for the first time. Everything works fine except my guest vlan doesnt get IP address from the designated dmz network. I was wondering if I am missing something. Currently Flexconnect it configured on the wlans with LOC